Abstract:Low temperature proton exchange membrane water electrolyzer (PEMWE) represents a critical technology for green hydrogen production. It offers the advantages of significantly higher current density and higher H 2 purity, rendering it a preferred technology when high energy efficiency and low footprint are essential. Working in the oxidative and acidic environment under high polarization voltage, however, adds substantial demand to the electrode catalyst and the support. This is particularly the case at anode where the oxygen evolution reaction (OER) takes place. At present, the platinum group metal (PGM) materials such as Ir black or Ir oxide are catalysts of choice. Their high cost and limited reserve add a significant cost barrier to PEM electrolyzer, which contributes to the overall expense of hydrogen production next only to the cost of electricity. Replacing Ir with earth-abundant transition metal oxides could help to reduce the electrolyzer system cost. For PEMWE application, a PGM-free anodic catalyst must be highly active to match the performance of Ir. Furthermore, it must be stable against oxidative acid corrosion. At Argonne National Laboratory, we recently developed a new PGM-free OER of a nanofibrous cobalt spinel catalyst co-doped with lanthanum and manganese (LMCF). [1] The catalyst was synthesized from the precursor of cobalt zeolitic methyl-imidazolate framework (Co-ZIF) doped with manganese and lanthanum. The Co-ZIF was mixed with a polymer solution and electrospun into nanofiber before being converted to fibrous cobalt spinel under low temperature oxidation to remove all the organics and carbon. The new PGM-free catalyst demonstrated a low overpotential of 353 mV (RHE) at 10 mA/cm 2 and a low OER degradation over 360 hours in acidic electrolyte. A PEMWE containing this catalyst at its anode at ~2.0 mg/cm 2 demonstrated a current density of 2000 mA/cm 2 at 2.47 volts (Nafion® 115 membrane) or 4000 mA/cm 2 at 3.00 volt (Nafion® 212 membrane). The membrane electrode was also subjected to accelerated-stress-test (AST) in both voltage cycling and galvanostatic run at different current densities. Low degradation rates under both ASTs were observed. In addition to catalyst design and synthesis, we also conducted extensive structural characterizations, stability measurement, as well as computational modeling. Our in situ study found that the OER process involves significant lattice oxygen movement, leading to lowering instead of raising the cobalt oxidation state during the electrolysis. The measurement of the stability number, combined with computational Pourbaix diagram, elucidated the importance of the operating potential in reducing catalyst dissolution. These findings offer in-depth understanding and direction of future development for PGM-free OER catalyst in PEM water electrolyzer. Acknowledgement : This work is supported by the U.S. Department of Energy, Office of Energy Efficiency and Renewal Energy, Hydrogen and Fuel Cell Technologies Office, and by Laboratory Directed Research and Development funding of Argonne National Laboratory, provided by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DEAC02-06CH11357. Work performed at the Center for Nanoscale Materials and Advanced Photon Source, both U.S. Department of Energy Office of Science User Facilities, was supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. [1] “La- and Mn-doped cobalt spinel oxygen evolution catalyst for proton exchange membrane electrolysis” Lina Chong, Guoping Gao, Jianguo Wen, Haixia Li, Haiping Xu, Zach Green, Joshua D. Sugar, A. Jeremy Kropf, Wenqian Xu, Xiao-Min Lin, Hui Xu, Lin-Wang Wang, Di-Jia Liu, Science 380, 609–616 ( 2023 )

Dense-Packed RuO2 Nanorods with In Situ Generated Metal Vacancies Loaded on SnO2 Nanocubes for Proton Exchange Membrane Water Electrolyzer with Ultra-Low Noble Metal Loading

Interface-Strengthened Ru-Based Electrocatalyst for High-Efficiency Proton Exchange Membrane Water Electrolysis at Industrial-Level Current Density

Defect-balanced Active and Stable Co3O4-x for Proton Exchange Membrane Water Electrolysis at Ampere-level Current Density

RuO2 Nanorods as an Electrocatalyst for Proton Exchange Membrane Water Electrolysis

Mn-doped RuO2 nanocrystals with abundant oxygen vacancies for enhanced oxygen evolution in acidic media

Oxyanion Engineering on RuO2 for Efficient Proton Exchange Membrane Water Electrolysis

2D MOF Structure Tuning Atomic Ru Sites for Efficient and Robust Proton Exchange Membrane Water Electrolysis

One‐Step Fabrication of Ultralow Pt Loading High Efficiency Proton Exchange Membrane for Water Electrolysis by Conventional E‐Beam Metal Deposition

Tensile‐Strained RuO2 Loaded on Antimony‐Tin Oxide by Fast Quenching for Proton‐Exchange Membrane Water Electrolyzer

Defective Ru-doped α-MnO 2 nanorods enabling efficient hydrazine oxidation for energy-saving hydrogen production via proton exchange membranes at near-neutral pH

Controlled doping of ultralow amounts Ru on Ni cathode for PEMWE: Experimental and theoretical elucidation of enhanced performance

Metallic Ru‐Ru Interaction in Ruthenium Oxide Enabling Durable Proton Exchange Membrane Water Electrolysis

Non-iridium-based electrocatalyst for durable acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Highly Stable and Efficient Oxygen Evolution Electrocatalyst Based on Co Oxides Decorated with Ultrafine Ru Nanoclusters

Highly stable RuO2/SnO2 nanocomposites as anode electrocatalysts in a PEM water electrolysis cell

Simultaneously Improving the Pore Structure and Electron Conductive Network of the Anode Catalyst Layer Via SnO2 Doping for Proton Exchange Membrane Water Electrolysis

Ir–Ru Electrocatalysts Embedded in N‐Doped Carbon Matrix for Proton Exchange Membrane Water Electrolysis

Reducing Noble Metal Content in Water Electrolysis Catalysts: A Study on High-Entropy Oxides

PGM-Free Oxygen Evolution Reaction Catalyst for PEM Water Electrolysis – a Mechanistic Study on Activity and Durability for Practical Applications

Hexagonal Defect‐Rich MnOx/RuO2 with Abundant Heterointerface to Modulate Electronic Structure for Acidic Oxygen Evolution Reaction

Self-assembled RuO2@IrOx core-shell nanocomposite as high efficient anode catalyst for PEM water electrolyzer