Reassessment of Transient Permeability Measurement for Tight Rocks: the Role of Boundary and Initial Conditions
Yue Wang,Zhiguo Tian,Steffen Nolte,Alexandra Amann-Hildenbrand,Bernhard M. Krooss,Moran Wang
DOI: https://doi.org/10.1016/j.jngse.2021.104173
IF: 5.285
2021-01-01
Journal of Natural Gas Science and Engineering
Abstract:The pulse-decay method is one of the most widely used transient methods for permeability measurements. Though many modified pulse-decay methods with various experimental designs have been proposed, the theoretical analysis is still insufficient, especially from the perspective of the boundary and initial conditions. In terms of boundary conditions, the tests can be conducted with a reservoir of finite volume on one side of the sample and a reservoir of "zero", finite, or "infinite" volume on the other side. Common initial conditions differ in terms of the pore pressure within the sample at the start of the test, which can be either equal to the downstream or the upstream reservoir pressure. For the first time, the method of separation of variables is used to obtain the analytical solutions of the pulse-decay methods and assess the specific effects of boundary and initial conditions. The results indicate that if the pressure difference between two ends of the sample is less than 10 %, the slope of the semi-logarithmic plot of pressure versus time is solely determined by the boundary conditions (pore volume/ reservoir volume ratios), and the intercept depends on both the boundary and initial conditions. We show that the requirement that a new pressure pulse cannot be applied before the previous pulse subsides is unnecessary and the restriction on the pulse size can be relaxed to some extent. The duration of the pulse-decay tests is mainly determined by the boundary conditions, and the influence of initial conditions decreases as the reservoir volumes increase. The error in the permeability evaluation caused by the inaccuracy of pore and reservoir volume measurements is also discussed.