Abstract:Indentation analysis in multilayer composite sandwich panels. This study examines the effects of multilayering in sandwich panel composite structures with different corrugated core configurations under quasi‐static indentation loading. The panels were fabricated using woven glass fibers and epoxy resin via the Vacuum Infusion Process. Experiments were conducted using two hemispherical cylindrical indenters with a diameter of 20 mm (ID = 20 mm) and 10 mm (ID = 10 mm) and the behavior of the composite structure in terms of contact force and fracture mechanisms for different core corrugations (square and butterfly) were investigated in two ways with foam and without foam. The experimental results demonstrate that, among corrugated core geometries without foam, butterfly cores outperform square cores in terms of structural strength, maximum force, moment force, energy absorption, specific energy absorption, and displacement until full indentation. Moreover, the butterfly core shows a higher peak load and different failure mechanisms compared to the square core. Under loading with a 10 mm indenter, the butterfly core without foam only experienced perforation in the loading area, without fracture completely. Also, adding foam did not change failure mechanisms and mechanical behavior in the butterfly geometry. However, in the square geometry, foam filled gaps between the core, preventing fracture completely and leading to only perforation in the loading area, unlike the specimen without foam. The visual analysis during the quasi‐static indentation process revealed several significant damage mechanisms, including matrix cracking, fiber breakage, delamination, buckling and crushing of cell walls, damage to top sheets, core separation, and complete indentation of the samples. Highlights Delamination and indentation failure mechanisms were seen on the butterfly core. Skin indentation and rib fracture failure mechanisms were seen on the square core. Butterfly corrugated cores revealed the best performance without/with foam. The core shape was more effective on the strength than the foam addition.

Damage Assessment of 3-D Printed Ceramic Sandwich Structures with an Auxetic Honeycomb Core Subjected to Quasistatic Indentation Loading

Damage sensitivity studies of composite honeycomb sandwich structures under in-plane compression and 4-point bending: experiments and numerical simulations

Structural response of sandwich structures with CFRP face sheets under quasi-static indentation and high velocity impact: An experimental and numerical study

Quasi-static Indentation Responses of FMLs/2.5D Woven Carbon-Fiber Honeycomb Sandwich Structures under Different Structural Parameters

Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

Damage characterization of sandwich composites subjected to impact loading

Experimental analysis of quasi‐static indentation in composite sandwich multilayers with corrugated core

A Quantitative Representation of Damage and Failure Response of 3D Textile SiC/SiC Ceramics Matrix Composites Subjected to Flexural Loading

Damage Resistance of Honeycomb Sandwich Composites under Low-Energy Impact

Effect of varying core density and material on the quasi‐static behaviors of sandwich structure with 3D‐printed hexagonal honeycomb core

A multi-scale damage model and mechanical behavior for novel light-weight C/C honeycomb sandwich structure

Investigation of Micro-defects in Dental Ceramics and Damage Evolution

Mechanical behaviors and failure modes of sandwich cylinders with square honeycomb cores under axial compression

Damage and failure analysis of a SiCf/SiC ceramic matrix composite using digital image correlation and acoustic emission

Experimental, numerical and optimization investigation of sandwich structures with 3D-printed sacrificial core under explosive loading

Face Damage Growth of Sandwich Composites under Compressive Loading: Experiments, Analytical and Finite Element Modeling

Quasi-static indentation and sound-absorbing properties of 3D printed sandwich core panels

Sub-critical damage study of aluminium honeycomb and CFRP sandwich panels subjected to impact

Contact Damage and Damage Tolerance of Dental Ceramics

Dynamic response and failure of carbon/epoxy composite sandwich subjected to underwater impulsive loading

Residual Compressive Strength of Aluminum Honeycomb Sandwich Structures with CFRP Face Sheets after Low-velocity Impact