Abstract:Nickel-rich layered oxide cathode materials having a Ni content of ≥90% have great potential for use in next-generation lithium-ion batteries (LIBs) due to their high energy densities and relatively low cost. They suffer, however, from poor cycling performance and rate capability, significantly hampering their widespread applicability. In this study, we synthesized a Ni-rich precursor through a co-precipitation method and added different amounts of the Li excess on the precursors using a solid-state method to obtain sintered Li1+x (Ni0.9Co0.05Mn0.05)1–x O2 (denoted as L1+x -NCM; x = 0.00, 0.02, 0.04, 0.06, and 0.08) transition metal (TM) oxide cathode materials. The L1+x -NCM cathode having a Li excess of 4% exhibited a discharge capacity of ca. 216.17 mA h g–1 at 2.7–4.3 V, 0.1 C and retained 95.7% of its initial discharge capacity (ca. 181.39 mA h g–1) after 100 cycles of 1 C charge/discharge which is the best performance as compared with stoichiometric Li1+x (Ni0.9Co0.05Mn0.05)1–x O2 (i.e., x = 0, Li/TM = 1:1). Furthermore, a high-rate capability of ca. 162.92 mA h g–1 at a rate of 10 C led to the 4% Li excess, optimizing the electrochemical performance, relative to the other Li-excess samples. Ex/in situ X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy revealed that the 4% Li excess in the Ni-rich NCM90 cathode material (i) decreased the Li+/Ni2+ disorder by increasing the content of Ni3+ in the TM slab, (ii) increased the crystallinity, and (iii) accelerated Li+-ion transport by widening the Li slab. Furthermore, electrochemical impedance spectroscopy and cyclic voltammetry confirmed that the appropriate Li excess lowered the electrochemical impedance and improved the reversibility of the electrochemical reaction. Therefore, our results revealed that NCM90 cathode materials featuring an optimal Li excess are potential candidates for use in next-generation LIBs.

Implication of Lithium Excess Induced Structure and Electrochemical Behavior Changes of LiNi 0.5 Mn 1.5 O 4 Spinel

Effects of Lithium Content on the Structure and Electrochemical Performance of Spherical Lithium-rich Cathode Materials

Lattice‐Cell Orientation Disorder in Complex Spinel Oxides

Overlithiation-driven structural regulation of lithium nickel manganese oxide for high-performance battery cathode

Boosting the Electrochemical Performance of a Spinel Cathode with the In Situ Transformed Allogenic Li-Rich Layered Phase

Insight into the cation migration and surface structural evolution of spinel LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Tuning Li-excess to optimize Ni/Li exchange and improve stability of structure in LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries

Recent Progress of High Voltage Spinel LiMn 1.5 Ni 0.5 O 4 Cathode Material for Lithium-Ion Battery: Surface Modification, Doping, Electrolyte, and Oxygen Deficiency

Structure Evolution from Layered to Spinel during Synthetic Control and Cycling Process of Fe-Containing Li-Rich Cathode Materials for Lithium-Ion Batteries

Recent Progress of High Voltage Spinel LiMn1.5Ni0.5O4 Cathode Material for Lithium-Ion Battery: Surface Modification, Doping, Electrolyte, and Oxygen Deficiency

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Performance Improvement of Li-rich Layer-Structured Li1.2Mn0.54Ni0.13Co0.13O2 by Integration with Spinel LiNi0.5Mn1.5O4

Exploring Lithium-Cobalt-Nickel Oxide Spinel Electrodes for ≥3.5 V Li-Ion Cells.

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries

Effect of Li Excess on Electrochemical Performance of Ni-Rich LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode Materials for Li-Ion Batteries

Electrochemical and ex situ XRD studies of a LiMn1.5Ni0.5O4 high-voltage cathode material

Kinetic Control of the Li0.9Mn1.6Ni0.4O4 Spinel Structure with Enhanced Electrochemical Performance

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Influence of Transition-Metal Order of LNMO Spinel on the Li Ion Diffusion

Nonstoichiometric Li 1±x Ni 0.5 Mn 1.5 O 4 with Different Structures and Electrochemical Properties