Abstract:A depth encoding PET detector module using semi-monolithic scintillation crystal single-ended readout by a SiPM array was built and its performance was measured. The semi-monolithic scintillator detector consists of 11 polished LYSO slices measuring 1 × 11.6 × 10 mm3. The slices are glued together with enhanced specular reflector (ESR) in between and outside of the slices. The bottom surface of the slices is coupled to a 4 × 4 SiPM array with a 1 mm light guide and silicon grease between them. No reflector is used on the top surface and two sides of the slices to reduce the scintillation photon reflection. The signals of the 4 × 4 SiPM array are grouped along rows and columns separately into eight signals. Four SiPM column signals are used to identify the slices according to the center of the gravity of the scintillation photon distribution in the pixelated direction. Four SiPM row signals are used to estimate the y (monolithic direction) and z (depth of interaction) positions according to the center of the gravity and the width of the scintillation photon distribution in the monolithic direction, respectively. The detector was measured with 1 mm sampling interval in both the y and z directions with electronic collimation by using a 0.25 mm diameter 22Na point source and a 1 × 1 × 20 mm3 LYSO crystal detector. An average slice based energy resolution of 14.9% was obtained. All slices of 1 mm thick were clearly resolved and a detector with even thinner slices could be used. The y positions calculated with the center of gravity method are different for interactions happening at the same y, but different z positions due to depth dependent edge effects. The least-square minimization and the maximum likelihood positioning algorithms were developed and both methods improved the spatial resolution at the edges of the detector as compared with the center of gravity method. A mean absolute error (MAE) which is defined as the probability-weighted mean of the absolute value of the positioning error is used to evaluate the spatial resolution. An average MAE spatial resolution of ~1.15 mm was obtained in both y and z directions without rejection of the multiple scattering events. The average MAE spatial resolution was ~0.7 mm in both y and z directions after the multiple scattering events were rejected. The timing resolution of the detector is 575 ps. In the next step, long rectangle detector will be built to reduce edge effects and improve the spatial resolution of the semi-monolithic detector. Thick detector up to 20 mm will be explored and the positioning algorithms will be further optimized.

Position-sensitive hybrid particle detector based on discrete-time readout

Scintillator-SiPM Detector for Tracking and Energy Deposition Measurements

A New Compact Position-Sensitive PMT for Scintillation Detectors

A time-based single transmission-line readout with position multiplexing

A Position Sensitive Scintillation Detector Using a Side-by-side GAGG-F/GAGG-T Phoswich Block

Performance of a SiPM Based Semi-Monolithic Scintillator PET Detector

Scintillation and Cherenkov photon counting detectors with analog silicon photomultipliers for TOF-PET

Design and characterization of a hybrid PET detector with DOI capability

Development of the front-end electronics for a cost-effective PET-like detector system

A Fast Readout Electronic System for Accurate Spatial Detection in Ion Beam Tracking for the Next Generation of Particle Accelerators

Scintillation detectors constructed with an optimized 2x2 silicon photomultiplier array

Time and position sensitive single photon detector for scintillator read-out

Development of a 3-D Position Sensitive Neutron Detector Based on Organic Scintillators with Double Side SiPM Readout

High resolution MCP-PMT readout using transmission lines

Segmented readout for Cherenkov time-of-flight positron emission tomography detectors based on bismuth germanate

A thick semi-monolithic scintillator detector for clinical PET scanners

From 3D to 5D tracking: SMX ASIC-based Double-Sided Micro-Strip detectors for comprehensive space, time, and energy measurements

Development of a single-photon imaging detector with pixelated anode and integrated digital read-out

4D-tracking with digital SiPMs

A Finely Segmented Semi-Monolithic Detector tailored for High Resolution PET

Low power implementation of high frequency SiPM readout for Cherenkov and scintillation detectors in TOF-PET