Abstract:Hydrotalcite-type solids of the form NiAl-R, where R refers to the ratio of Ni to Al (R = 2, 3, 5, 8, and 10), were successfully synthesized following co-precipitation method at pH = 12. The obtained solids were calcined at 800 °C, except for NiAl-R2 where calcination was performed at temperatures ranging between 300 and 800 °C. Following calcination, the resulting materials were evaluated for their catalytic activity and stability during the process of dry reforming of methane. Factors affecting the catalytic activity of the obtained materials such as the ratio R and calcination temperature were also studied. Prior to calcination, X-ray diffraction analyses clearly illustrated the typical hydrotalcite structure of the synthesized materials (when R ≤ 5). On the other hand, calcination at various temperatures prompted decomposition of all solids to form NiO, with exception to NiAl-R2, which upon calcinations at 800 °C was decomposed to form NiO and a second phase spinel containing NiAl2O4. The chemical composition of the obtained solids was determined by atomic absorption spectroscopy. Further characterization was performed using several techniques, including: surface area measurements (SBET), scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The reducibility of nickel species was studied via temperature-programmed reduction. The catalytic performance of the as-prepared samples was studied for dry reforming of methane under atmospheric pressure at temperatures ranging between 400 and 700 °C. The catalytic activity of the designed substances highlighted the importance of molar ratios i.e. Ni2+/Al3+ on the success of the overall dry reforming of methane process. The catalytic activity of the synthesized materials was also found to be directly proportional to the ratio of Ni/Al as well as the calcination temperature, with exception to NiAl-R2 which was found to exhibit the highest activity of all. The latter observation was perhaps associated with the lower size of the crystalline particles in conjunction with the presence of a second phase containing NiAl2O4. In this study, it is shown that the calcination temperature has a significant effect on the catalytic property and the crystallite size of the metal.

Assessing the effect of acid and alkali treatment on a halloysite-based catalyst for dry reforming of methane

Effect of Acid Treatment of Zeolite on Catalytic Performance of Mo/HZSM-5 for Methane Dehydroaromatization

Effects of acid treatment on the physico-chemical and pore characteristics of halloysite

Catalytic Methanation of CO2 over Ni Supported on Acidation Bentontie and Alkalization Bentontie

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

Effect of the Ni/Al ratio of hydrotalcite-type catalysts on their performance in the methane dry reforming process

Effect of Thermal, Acid, and Alkaline Treatments over SAPO-34 and Its Agglomerated Catalysts: Property Modification and Methanol-to-Olefin Reaction Performance

Enhanced Performance of Methane Dehydro-Aromatization on Mo-based HZSM-5 Zeolite Pretreated by NH4F

Stability performance of an Algerian Ni/purified diatomite catalyst in the dry reforming methane reaction: characterization and properties

Effect of Modified Alumina Support on the Performance of Ni-Based Catalysts for CO2 Reforming of Methane

Catalytic Reactivity Assessment of AgM and CuM (M = Cr, Fe) Catalysts for Dry Reforming of Methane Process with CO2

Effects of Acid Leaching Post-Treatment on the Catalytic Performance of MoO3mordenite-alumina Catalysts for 1-Butene Metathesis Reaction

Tailored Ni-MgO Catalysts: Unveiling Temperature-Driven Synergy in CH4-CO2 Reforming

Promotion effect of different lanthanide doping on Co/Al2O3 catalyst for dry reforming of methane

A spectroscopic study on the effect of acid concentration on the physicochemical properties of calcined halloysite nanotubes

The influence of alkaline promoters on the properties of the Ni/HAp catalyst in the methane dry reforming reaction

Post-Steam-Treatment of Mo/Hzsm-5 Catalysts: an Alternative and Effective Approach for Enhancing Their Catalytic Performances of Methane Dehydroaromatization

Acid-site control of ZSM-5 zeolites using quaternary ammonium hydroxides for shale gas dehydroaromatization

Hydrogen Production by Steam Reforming of Ethanol and Dry Reforming of Methane with CO2 on Ni/Vermiculite: Stability Improvement via Acid or Base Treatment of the Support

Halloysite Nanotubes: Smart Nanomaterials in Catalysis

In Situ 13C Solid-State NMR Studies of the Catalytic Conversion of Methanol on Expanded Montmorillonites and Saponites