[Prognosis of myocardial infarct: presentation of a quantitation scheme studied in 100 cases].

G. Gironi,G. Conte,F. Andreola

1966-06-01

Abstract:

What problem does this paper attempt to address?

AdapSafe: Adaptive and Safe-Certified Deep Reinforcement Learning-Based Frequency Control for Carbon-Neutral Power Systems.

Xu Wan,Mingyang Sun,Boli Chen,Zhongda Chu,Fei Teng

DOI: https://doi.org/10.1609/aaai.v37i4.25660

2023-01-01

Proceedings of the AAAI Conference on Artificial Intelligence

Abstract:With the increasing penetration of inverter-based renewable energy resources, deep reinforcement learning (DRL) has been proposed as one of the most promising solutions to realize real-time and autonomous control for future carbonneutral power systems. In particular, DRL-based frequency control approaches have been extensively investigated to overcome the limitations of model-based approaches, such as the computational cost and scalability for large-scale systems. Nevertheless, the real-world implementation of DRL-based frequency control methods is facing the following fundamental challenges: 1) safety guarantee during the learning and decision-making processes; 2) adaptability against the dynamic system operating conditions. To this end, this is the first work that proposes an Adap tive and Safe -Certified DRL ( AdapSafe ) algorithm for frequency control to simultaneously address the aforementioned challenges. In particular, a novel self-tuning control barrier function is designed to actively compensate the unsafe frequency control strategies under variational safety constraints and thus achieve guaranteed safety. Furthermore, the concept of meta-reinforcement learning is integrated to significantly enhance its adaptiveness in non-stationary power system environments without sacrificing the safety cost. Experiments are conducted based on GB 2030 power system, and the results demonstrate that the proposed AdapSafe exhibits superior performance in terms of its guaranteed safety in both training and test phases, as well as its considerable adaptability against the dynamics changes of system parameters.
Research on the optimization of primary frequency modulation parameters of high power units

Jinlong LIAO,Bo CHEN,Ning DING,Huanyu LI,Zitao YU,Deren SHENG

DOI: https://doi.org/10.19666/j.rlfd.201803054

2018-01-01

Abstract:The primary frequency modulation parameters of high power units are the key factors that influence dynamic stability of self-frequency modulation and keep the power grid frequency stable. The primary frequency modulation standard of the national power grid, the necessary energy balance conditions for the stability of the power grid and the necessary conditions for the stability of the units are set as the constraints, and then the optimization model is established by using the total coal consumption and the minimum total pollution emissions as objective functions. Twelve units are selected and the simulation tests are carried out based on their actual operation data. The results show that, this algorithm can ensure the units finish the primary frequency modulation tasks quickly with the best economy. For the deep peak load regulation units, it is necessary to break the constraint of the primary frequency modulation standard of the power grid properly to set the units. This method has important reference value for the inequality rate of optimization speed of the power grid system and the guarantee of the rapidity and economy of the frequency modulation of the power grid.
Model-Free Load Frequency Control of Nonlinear Power Systems Based on Deep Reinforcement Learning

Xiaodi Chen,Meng Zhang,Zhengguang Wu,Ligang Wu,Xiaohong Guan

DOI: https://doi.org/10.1109/tii.2024.3353934

IF: 12.3

2024-01-01

IEEE Transactions on Industrial Informatics

Abstract:Load frequency control (LFC) is widely employed in power systems to stabilize frequency fluctuation and guarantee power quality. However, most existing LFC methods rely on accurate power system modeling and usually ignore the nonlinear characteristics of the system, limiting controllers' performance. To solve these problems, this article proposes a model-free LFC method for nonlinear power systems based on deep deterministic policy gradient framework. The proposed method establishes an emulator network to emulate power system dynamics. After defining the action-value function, the emulator network is applied for control actions evaluation instead of the critic network. Then, the actor network controller is effectively optimized by estimating the policy gradient based on zeroth-order optimization and backpropagation algorithm. Simulation results and corresponding comparisons demonstrate the designed controller can generate appropriate control actions and has strong adaptability for nonlinear power systems.

automation & control systems,computer science, interdisciplinary applications,engineering, industrial
A Control Method to Balance the Efficiency and Reliability of a Time-Delayed Pump-Valve System

Zhounian Lai,Peng Wu,Shuai Yang,Dazhuan Wu

DOI: https://doi.org/10.1155/2016/5898209

IF: 1.43

2016-01-01

Mathematical Problems in Engineering

Abstract:The efficiency and reliability of pumps are highly related to their operation conditions. The concept of the optimization pump operation conditions is to adjust the operation point of the pump to obtain higher reliability at the cost of lower system efficiency using a joint regulation of valve and frequency convertor. This paper realizes the control of the fluid conveying system based on the optimization results. The system is a nonlinear Multi-Input Multioutput (MIMO) system with time delays. In this paper, the time delays are separated from the system. The delay-free system is linearized using input-output linearization and controlled using a sliding mode method. A modified Smith predictor is used to compensate time delays of the system. The control strategy is validated to be effective on the test bench. The comparison of energy consumption and operation point deviation between conventional speed regulation and the new method is presented.
Modeling and Control for Beam Pumping Units: An Overview

Zhi-Wei Gao,Shifeng Jia

DOI: https://doi.org/10.3390/pr12071468

IF: 3.5

2024-07-14

Processes

Abstract:Beam pumping units play a key role in oil extraction. There is an increasing demand for optimal oil-extracting performance as operational environments are becoming more challenging and complex. Therefore, it is vital to create an acceptable mathematical model and develop robust control mechanisms. In the past decades, researchers have achieved fruitful results regarding modeling and control methods in this field. This article provides a comprehensive review of the research on modeling and control methods for beam pumping units, including mathematical models based on differential equations and boundary conditions, as well as the control strategies designed. Finally, future perspectives and recommendations are presented.

engineering, chemical
Optimizing a Superconducting Radiofrequency Gun Using Deep Reinforcement Learning

David Meier,Luis Vera Ramirez,Jens Völker,Bernhard Sick,Jens Viefhaus,Gregor Hartmann

DOI: https://doi.org/10.48550/arXiv.2203.09935

2022-03-11

Accelerator Physics

Abstract:Superconducting photoelectron injectors are a promising technique for generating high brilliant pulsed electron beams with high repetition rates and low emittances. Experiments such as ultra-fast electron diffraction, experiments at the Terahertz scale, and energy recovery linac applications require such properties. However, optimization of the beam properties is challenging due to the high amount of possible machine parameter combinations. In this article, we show the successful automated optimization of beam properties utilizing an already existing simulation model. To reduce the amount of required computation time, we replace the costly simulation by a faster approximation with a neural network. For optimization, we propose a reinforcement learning approach leveraging the simple computation of the derivative of the approximation. We prove that our approach outperforms common optimization methods for the required function evaluations given a defined minimum accuracy.
Reinforcement Learning-Based Event-Triggered FCS-MPC for Power Converters

Xing Liu,Lin Qiu,Youtong Fang,Jose Rodriguez

DOI: https://doi.org/10.1109/tie.2023.3239865

IF: 7.7

2023-01-01

IEEE Transactions on Industrial Electronics

Abstract:This article aims to first focus on an improvement of finite control-set model predictive control strategy for power converters that is based on reinforcement learning event-triggered predictive control architecture with the help of adaptive dynamic programming technique and event-triggered mechanism subject to system uncertainties. Our development, endowed with the merits of reinforcement learning and event-triggered control as well as a predictive control solution, is able to alleviate the issues of parametric uncertainties and high switching frequency inherent in the existing scheme, while retaining the merits of the finite control-set model predictive control. Finally, this proposal is experimentally evaluated, where robust performance tests confirm the interest and applicability of the proposed control methodology.
Wide Area Measurement System-based Low Frequency Oscillation Damping Control through Reinforcement Learning

Yousaf Hashmy,Zhe Yu,Di Shi,Yang Weng

DOI: https://doi.org/10.48550/arXiv.2001.07829

2020-01-22

Abstract:Ensuring the stability of power systems is gaining more attraction today than ever before, due to the rapid growth of uncertainties in load and renewable energy penetration. Lately, wide area measurement system-based centralized controlling techniques started providing a more flexible and robust control to keep the system stable. But, such a modernization of control philosophy faces pressing challenges due to the irregularities in delays of long-distance communication channels and response of equipment to control actions. Therefore, we propose an innovative approach that can revolutionize the control strategy for damping down low frequency oscillations in transmission systems. Proposed method is enriched with a potential of overcoming the challenges of communication delays and other non-linearities in wide area damping control by leveraging the capability of the reinforcement learning technique. Such a technique has a unique characteristic to learn on diverse scenarios and operating conditions by exploring the environment and devising an optimal control action policy by implementing policy gradient method. Our detailed analysis and systematically designed numerical validation prove the feasibility, scalability and interpretability of the carefully modelled low-frequency oscillation damping controller so that stability is ensured even with the uncertainties of load and generation are on the rise.

Systems and Control
Process Model-Assisted Optimization Control Method Based on Model Predictive Control and Deep Reinforcement Learning for Coordinated Control System in Coal-Fired Power Unit

Bangwu Dai,Fuli Wang,Yuqing Chang,Fei Chu,Shengjun Song

DOI: https://doi.org/10.1109/tase.2023.3349196

IF: 6.636

2024-01-01

IEEE Transactions on Automation Science and Engineering

Abstract:As the large-scale integration of renewable energy into the power grid, coal-fired power units have to undertake the task of load-frequency regulation, the optimization control of the coal-fired power units is becoming increasingly important. Reinforcement learning is being used for optimization control of the process increasingly but may encounter high learning costs. In this paper, a process model-assisted optimization control framework called PMA-OC is proposed to achieve the optimization control of coal-fired power unit. In this framework, a low-precision process model developed by process operation knowledge is employed to achieve the initial control based on model predictive control algorithm (MPC) and improve the dynamic characteristics of the coordinated control system. Then the deep reinforcement learning algorithm (DRL) is utilized to improve the initial control continuously, through constantly interacting with the improved process. With the full mining of process knowledge from the power unit, the improved process offers the better training samples for DRL, reduces the learning complexity of DRL, and strengthens the learning efficiency of DRL. Finally, the proposed control framework is employed to achieve the optimization control of the coordinated control system, and simulation results indicate that the proposed control framework outperforms the existing standalone MPC and DRL methods in terms of anti-interference ability, dynamic response time, and performs well control capability. Note to Practitioners—The flexible and stable operation of coal-fired power units is of great significance to the peak load regulation and supply guarantee of the power grid. For practitioners of the coal-fired power unit, this paper proposes a process model-assisted optimization control framework to promote the process knowledge utilization. In this framework, process knowledge is used to implement preliminary control on coal-fired power units to reduce the complex dynamic characteristics of coal-fired power units. Then, the reinforcement learning algorithm is used to continuously improve the control performance of coal-fired power units by interacting with the improved process. Finally, the effectiveness of the proposed method is verified by a supercritical unit. Although the proposed method is applied to the optimal control of coal-fired power units, its ideas can be used for the reference in other complex industrial processes.

automation & control systems
A Multiagent Reinforcement Learning Approach for Wind Farm Frequency Control

Yanchang Liang,Xiaowei Zhao,Li Sun

DOI: https://doi.org/10.1109/tii.2022.3182328

IF: 12.3

2022-12-17

IEEE Transactions on Industrial Informatics

Abstract:As wind turbines (WTs) become more prevalent, there is an increasing interest in actively controlling their power output to participate in the frequency regulation for the power grid. Conventional frequency regulation controllers use fixed gains, making it difficult for the WT to adjust its kinetic energy uptake to its operating conditions and to collaborate effectively with other WTs in the wind farm. In addition, the design of conventional frequency controllers does not consider their impacts on the mechanical structure. To address these issues, in this article, we model the cooperative frequency control problem for all the WTs in a wind farm as a decentralized partially observable Markov decision process and use a multiagent deep reinforcement learning algorithm to solve it. We also develop a grid-connected wind farm simulation model based on MATLAB/Simulink and OpenFAST, which can reflect the detailed interactions between the electrical and mechanical components of WTs. Simulation results show that the proposed strategy is effective in reducing frequency drops and has less impact on mechanical structure deflections compared with traditional methods.

automation & control systems,computer science, interdisciplinary applications,engineering, industrial
A Transfer and Deep Learning-Based Method for Online Frequency Stability Assessment and Control

Jian Xie,Wei Sun

DOI: https://doi.org/10.1109/access.2021.3082001

IF: 3.9

2021-01-01

IEEE Access

Abstract:Fast and accurate prediction and control of power system dynamic frequency after disturbance is essential to enhance power system stability. Machine learning methods have great potential in harnessing data for online application with accurate predictions. This paper proposes a two-stage novel transfer and deep learning-based method to predict power system dynamic frequency after disturbance and provide optimal event-based load shedding strategy to maintain system frequency. The proposed deep learning model combines convolutional neural network (CNN) and long short-term memory (LSTM) network to harness both spatial and temporal measurements in the input data, through a four-dimensional (4-D) tensor input construction process including, 1) capture system network topology information and critical measurements from different time intervals; 2) compute a multi-dimensional electric distance matrix and reduce to a 2-D plane which can describe the system nodal distribution; 3) construct 3-D tensors based on state variables at different sample times; and 4) integrate into 4-D tensor inputs. Moreover, a transfer learning process is employed to overcome the challenge of insufficient data and operating condition changes in real power systems for new prediction tasks. Simulation results in IEEE 118-bus system verify that the CNN-LSTM method not only greatly improves the timeliness of online frequency control, but also presents good accuracy and effectiveness. Test cases in the New England 39-bus system and the South Carolina 500-bus system validate that the transfer learning process can provide accurate results even with insufficient training data.

computer science, information systems,telecommunications,engineering, electrical & electronic
Stable Reinforcement Learning for Optimal Frequency Control: A Distributed Averaging-Based Integral Approach

Yan Jiang,Wenqi Cui,Baosen Zhang,Jorge Cortés

DOI: https://doi.org/10.48550/arXiv.2205.00411

2022-05-01

Abstract:Frequency control plays a pivotal role in reliable power system operations. It is conventionally performed in a hierarchical way that first rapidly stabilizes the frequency deviations and then slowly recovers the nominal frequency. However, as the generation mix shifts from synchronous generators to renewable resources, power systems experience larger and faster frequency fluctuations due to the loss of inertia, which adversely impacts the frequency stability. This has motivated active research in algorithms that jointly address frequency degradation and economic efficiency in a fast timescale, among which the distributed averaging-based integral (DAI) control is a notable one that sets controllable power injections directly proportional to the integrals of frequency deviation and economic inefficiency signals. Nevertheless, DAI do not typically consider the transient performance of the system following power disturbances and has been restricted to quadratic operational cost functions. This manuscript aims to leverage nonlinear optimal controllers to simultaneously achieve optimal transient frequency control and find the most economic power dispatch for frequency restoration. To this end, we integrate reinforcement learning (RL) to the classic DAI, which results in RL-DAI. Specifically, we use RL to learn a neural network-based control policy mapping from the integral variables of DAI to the controllable power injections which provides optimal transient frequency control, while DAI inherently ensures the frequency restoration and optimal economic dispatch. Compared to existing methods, we provide provable guarantees on the stability of the learned controllers and extend allowable cost functions to a much larger class. Simulations on the 39-bus New England system illustrate our results.

Systems and Control
Pump Scheduling Optimization in Urban Water Supply Stations: A Physics‐Informed Multiagent Deep Reinforcement Learning Approach

Haixiang Ma,Xuechun Wang,Dongsheng Wang

DOI: https://doi.org/10.1155/2024/9557596

IF: 4.6

2024-08-22

International Journal of Energy Research

Abstract:In the urban water supply system, a significant proportion of energy consumption is attributed to the water supply pumping station (WSPS). The conventional manual scheduling method employed by water supply enterprises imposes a considerable economic burden. In this paper, we intend to minimize the energy cost of WSPS by dynamically adjusting the combination of pumps and their operational states while considering the pressure difference of the main pipe and switching times of pump group. Achieving this goal is challenging due to the lack of accurate mechanistic models of pumps, uncertainty in environmental parameters, and temporal coupling constraints in the database. Consequently, a WSPS pump scheduling algorithm based on physics‐informed long short‐term memory (PI‐LSTM) surrogate model and multiagent deep deterministic policy gradient (MADDPG) is proposed. The proposed algorithm operates without prior knowledge of an accurate mechanistic model of the pump units. Combining data‐driven with the physical laws of fluid mechanics improves the prediction accuracy of the model compared to traditional data‐based deep learning models, especially when the amount of data is small. Simulation results based on real‐world trajectories show that the proposed algorithm can reduce energy consumption by 13.38% compared with the original scheduling scheme. This study highlights the potential of integrating physics‐informed deep learning and reinforcement learning to optimize energy consumption in urban water supply systems.

energy & fuels,nuclear science & technology
Real-Time Scheduling of Pumps in Water Distribution Systems Based on Exploration-Enhanced Deep Reinforcement Learning

Shiyuan Hu,Jinliang Gao,Dan Zhong,Rui Wu,Luming Liu

DOI: https://doi.org/10.3390/systems11020056

2023-01-20

Systems

Abstract:Effective ways to optimise real-time pump scheduling to maximise energy efficiency are being sought to meet the challenges in the energy market. However, the considerable number of evaluations of popular optimisation methods based on metaheuristics cause significant delays for real-time pump scheduling, and the simplification of traditional deterministic methods may introduce bias towards the optimal solutions. To address these limitations, an exploration-enhanced deep reinforcement learning (DRL) framework is proposed to address real-time pump scheduling problems in water distribution systems. The experimental results indicate that E-PPO can learn suboptimal scheduling policies for various demand distributions and can control the application time to 0.42 s by transferring the online computation-intensive optimisation task offline. Furthermore, a form of penalty of the tank level was found that can reduce energy costs by up to 11.14% without sacrificing the water level in the long term. Following the DRL framework, the proposed method makes it possible to schedule pumps in a more agile way as a timely response to changing water demand while still controlling the energy cost and level of tanks.
A Machine Learning-Based Model Predictive Control Method for Pumped Storage Systems

Qingsen Cai,Xingqi Luo,Chunyang Gao,Pengcheng Guo,Shuaihui Sun,Sina Yan,Peiyu Zhao

DOI: https://doi.org/10.3389/fenrg.2021.757507

IF: 3.4

2021-11-08

Frontiers in Energy Research

Abstract:Integrated systems required for renewable energy use are under development. These systems impose more stringent control requirements. It is quite challenging to control a pumped storage system (PSS), which is a key component of such power systems. Because of the S-characteristic area of the PSS pump turbine, traditional proportional-integral-derivative (PID) control induces considerable speed oscillation under medium and low water heads. PSSs are difficult to model because of their nonlinear characteristics. Therefore, we propose a machine learning (ML)-based model predictive control (MPC) method. The ML algorithm is based on Koopman theory and experimental data that includes PSS state variables, and is used to establish linear relationships between the variables in high-dimensional space. Subsequently, a simple, accurate mathematical PSS model is obtained. This mathematical model is used via the MPC method to obtain the predicted control quantity value quickly and accurately. The feasibility and effectiveness of this method are simulated and tested under various operating conditions. The results demonstrate that the proposed MPC method is feasible. The MPC method can reduce the speed oscillation amplitude and improve the system response speed more effectively than PID control.

energy & fuels
Research on Hybrid Optimization and Deep Learning Modeling Method in the Performance Seeking Control

Qiangang Zheng,Haoying Chen,Yong Wang,Haibo Zhang,Zhongzhi Hu

DOI: https://doi.org/10.1177/0954410020903151

2020-01-01

Abstract:A novel performance seeking control method based on hybrid optimization algorithm and deep learning modeling method is proposed to get a better engine performance. The deep learning modeling method, deep neural network, which has strong representation capability and can deal with big training data, is adopted to establish an on-board engine model. A hybrid optimization algorithm—genetic algorithm particle swarm optimization–feasible sequential quadratic programming—is proposed and applied to performance seeking control. The genetic algorithm particle swarm optimization–feasible sequential quadratic programming not only has the global search ability of genetic algorithm particle swarm optimization, but also has the high local search accuracy of feasible sequential quadratic programming. The final simulation experiments show that, compared with feasible sequential quadratic programming, genetic algorithm particle swarm optimization, and genetic algorithm, the proposed optimization algorithm can get more installed thrust, decrease fuel consumption between 2% to 3%, and decrease turbine blade temperature larger than 15k, while meeting all of the constraints. Moreover, it also shows that the proposed modeling method has high accuracy and real-time performance.
High environmentally adaptable phase control with reinforcement learning for coherent beam combination

Wenjun Jiang,Junzhe Gao,Guiyuan Tan,Mengmeng Zhang,Jiazhen Dou,Jianglei Di,Yuwen Qin

DOI: https://doi.org/10.1016/j.optlaseng.2024.108534

IF: 5.666

2024-09-02

Optics and Lasers in Engineering

Abstract:In contemporary times, the utilization of high-power lasers is progressively expanding. However, the potential of a single laser to generate power confronts inherent physical constraints, leading to limitations in its incremental power augmentation. To address this challenge, coherent beam combining technology has been introduced as a means to achieve amplified power output. In this paper, an intelligent phase control method for coherent beam combining is proposed, which introduces reinforcement learning algorithm to provide assistance for the control problem, designs algorithmic variables based on the physical model of coherent beam combining, deploys it in the environment for multiple interactions, and updates the neural network in real time using the feedback from the environment. The efficacy of the proposed algorithm is validated in a 7-channel coherent beam combining simulation system, and the experiment results show that the synthesized beam is strong and stable under the control of the algorithm, and the convergence of the algorithm as well as the control effect is discussed and validated in different environments, and its performance also exceeds that of the existing mainstream phase control algorithm SPGD.

optics
Nonlinear Model Predictive Control for Pumped Storage Plants Based on Online Sequential Extreme Learning Machine with Forgetting Factor

Chen Feng,Chaoshun Li,Li Chang,Zijun Mai,Chunwang Wu

DOI: https://doi.org/10.1155/2021/5692621

IF: 2.3

2021-03-04

Complexity

Abstract:With renewable energy (RE) being increasingly connected to power grids, pumped storage plants (PSPs) play a very important role in restraining the fluctuation of power grids. However, conventional control strategy could not adapt well to the different control tasks. This paper proposes an intelligent nonlinear model predictive control (NMPC) strategy, in which hydraulic-mechanical and electrical subsystems are combined in a synchronous control framework. A newly proposed online sequential extreme learning machine algorithm with forgetting factor (named WOS-ELM) is introduced to learn the dynamic behaviors of the coupling system. Specifically, the initial learning parameters are optimized by prior-knowledge learning and a new self-adaptive adjustment strategy is also put forward. Subsequently, the stair-like control strategy and artificial sheep algorithm (ASA) are used in rolling the optimization mechanism to replace the existing complex differential geometric solutions. Comparative experiments are carried out under different working conditions based on a PSP in China. The results show that the influence from coupling factors can be considerable and the proposed MPC strategy indicates superiority in voltage and load adjustment as well as the frequency oscillation suppression.

mathematics, interdisciplinary applications,multidisciplinary sciences
Performance enhancement and optimization of primary frequency regulation of coal‐fired units under boundary conditions

Jingqiu Kang,Xiaofeng Chen,Zhenyong Yang,Lei Liu,Mo You,Yuzheng Zhao,Boyang Liang,Junhong Hao,Feng Hong

DOI: https://doi.org/10.1002/ese3.1737

IF: 4.0349

2024-04-20

Energy Science & Engineering

Abstract:In the process of constructing a new energy system that comprises numerous integrations of renewable energy sources (RES), thermal power units still are conducted as a prior method to compensate for the fluctuation of the power grid caused by RES. In this paper, a dynamic process of the subcritical unit is modeled, and a frequency modulation optimization technology based on frequency signal accuracy is proposed to ensure the accuracy of the speed signal and improve the qualification rate of primary frequency modulation action. At the same time, the frequency regulation technology of steam engine side control optimization under boundary working conditions is proposed to realize the sensitivity and rapidity of the digital electric hydraulic control system. The coordination optimization technology under boundary working conditions is proposed, and the primary frequency regulation performance of the unit is improved through a series of optimization adjustments. The engineering application is carried out and the optimization effect is analyzed in this paper. Under the dual‐carbon goal, due to the long‐term operation of thermal power units under wide load and frequent fluctuating load after heat supply transformation, the dynamic process of subcritical units is modeled, and a frequency modulation optimization technology based on frequency signal accuracy is proposed to ensure the accuracy of the speed signal and improve the qualification rate of primary frequency modulation action. At the same time, the frequency regulation technology of steam engine side control optimization under boundary working conditions is proposed, so as to realize the sensitivity and rapidity of the digital electric hydraulic control system. The coordination optimization technology under boundary working conditions is proposed, and the primary frequency regulation performance of the unit is improved through a series of optimization adjustments. Finally, the engineering application is carried out and the optimization effect is analyzed.

energy & fuels

[Prognosis of myocardial infarct: presentation of a quantitation scheme studied in 100 cases].

AdapSafe: Adaptive and Safe-Certified Deep Reinforcement Learning-Based Frequency Control for Carbon-Neutral Power Systems.

Research on the optimization of primary frequency modulation parameters of high power units

Model-Free Load Frequency Control of Nonlinear Power Systems Based on Deep Reinforcement Learning

A Control Method to Balance the Efficiency and Reliability of a Time-Delayed Pump-Valve System

Modeling and Control for Beam Pumping Units: An Overview

Optimizing a Superconducting Radiofrequency Gun Using Deep Reinforcement Learning

Reinforcement Learning-Based Event-Triggered FCS-MPC for Power Converters

Wide Area Measurement System-based Low Frequency Oscillation Damping Control through Reinforcement Learning

Process Model-Assisted Optimization Control Method Based on Model Predictive Control and Deep Reinforcement Learning for Coordinated Control System in Coal-Fired Power Unit

A Multiagent Reinforcement Learning Approach for Wind Farm Frequency Control

A Transfer and Deep Learning-Based Method for Online Frequency Stability Assessment and Control

Stable Reinforcement Learning for Optimal Frequency Control: A Distributed Averaging-Based Integral Approach

Pump Scheduling Optimization in Urban Water Supply Stations: A Physics‐Informed Multiagent Deep Reinforcement Learning Approach

Real-Time Scheduling of Pumps in Water Distribution Systems Based on Exploration-Enhanced Deep Reinforcement Learning

A Machine Learning-Based Model Predictive Control Method for Pumped Storage Systems

Research on Hybrid Optimization and Deep Learning Modeling Method in the Performance Seeking Control

High environmentally adaptable phase control with reinforcement learning for coherent beam combination

Nonlinear Model Predictive Control for Pumped Storage Plants Based on Online Sequential Extreme Learning Machine with Forgetting Factor

Performance enhancement and optimization of primary frequency regulation of coal‐fired units under boundary conditions