Acquired immunity and vaccination in malaria.

S. Cohen,G. Butcher,G. Mitchell,J. A. Deans,J. Langhorne

DOI: https://doi.org/10.4269/AJTMH.1977.26.223

1977-11-01

American Journal of Tropical Medicine and Hygiene

Abstract:

What problem does this paper attempt to address?

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Jialong Duan,Hongzhe Xu,Wei E.I. Sha,Yuanyuan Zhao,Yudi Wang,Xiya Yang,Qunwei Tang

DOI: https://doi.org/10.1039/c9ta06674h

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Perovskite solar cells (PSCs) have attracted tremendous interest because of their rapid improvement in power conversion efficiency (PCE) from the initial PCE of 3.8% for the first prototype to the certified PCE of 25.2% in 2019. However, the inherent chemical instability of organic-inorganic hybrid perovskite halides influenced by moisture, heat and ultraviolet light is still a critical issue for them to meet application-specific requirements owing to the weak-bonded organic components in the hybrid crystal structure. The use of all-inorganic perovskites CsPbI3-xBrx (x = 0, 1, 2, and 3) as light-harvesters by completely substituting organic species with inorganic Cs+ ions has been recently regarded as a promising solar conversion technology. Since the initial efficiency of 2.9% achieved in 2015, the highest PCE record for inorganic PSCs has risen to 18.4% through structure optimization, compositional engineering, interfacial engineering, solvent control and surface passivation, etc. This article is dedicated to providing an up-to-date review on the development of inorganic PSCs tailored by various inorganic perovskite materials with gradually changed optical properties and stability, as well as the film-making methods and interfacial engineering technologies. Their limited efficiencies in theory and recombination mechanisms are also predicted with a detailed balance model. Finally, we focused on the state-of-the-art strategies for enhancing the photovoltaic performance and identified new challenges and outlooks for future studies in this field.
Application of Carbon Materials in Conductive Electrodes for Perovskite Solar Cells

Fanning Meng,Dongsheng Wang,Jiarun Chang,Jihui Li,Guiqiang Wang

DOI: https://doi.org/10.1002/solr.202301030

IF: 9.1726

2024-01-27

Solar RRL

Abstract:Over the past decade, perovskite solar cells (PSCs) have achieved significant achievements. But the golden triangle problem of commercial development, which encompasses high efficiency, high stability, and low cost, remains unresolved. Carbon materials exhibit a diverse range of morphological structures and possess numerous advantages. They are extensively used in PSCs to overcome the challenges encountered during PSCs commercialization. The PSCs utilizing graphene as the top electrodes not only deliver an impressive efficiency of 22.8%, but also show exceptional long‐term stability. The PSCs using carbon nanotubes as transparent conductive electrodes obtain an efficiency of 19%, exhibiting significant potential for scalable applications. Herein, the advantages of carbon materials as conductive electrodes are overviewed. The compatibility of carbon materials as conductive electrodes in PSCs, along with the associated challenges, regulatory strategies, and device performance are systematically discussed in terms of their intrinsic characteristics. The application of carbon materials derived from petroleum by‐products and biomass in the top electrodes of PSCs are summarized in detail. Finally, the underlying reasons why PSCs using carbon electrode show a comparatively lower efficiency when compared to conventional devices is analyzed in‐depth. The potential research directions are proposed to promote the development of carbon conductive electrodes in PSCs. This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary
[Interpretation of mechanograms].

J. Vedel

1972-03-01

Soins

Abstract:
Current status and trends of carbon-based electrodes for fully solution-processed perovskite solar cells

Laura M. González,Daniel Ramirez,Franklin Jaramillo

DOI: https://doi.org/10.1016/j.jechem.2021.11.020

IF: 13.1

2022-05-01

Journal of Energy Chemistry

Abstract:Perovskite solar cells (PSCs) have revolutionized photovoltaic research. As a result, a certified power conversion efficiency (PCE) of 25.5% was recorded in late 2020. Although this efficiency is comparable with silicon solar cells; some issues remain partially unsolved, such as lead toxicity, instability of perovskite materials under continuous illumination, moisture and oxygen, and degradation of the metallic counter electrodes. As an alternative to tackle this last concern, carbon materials have been recently used, due to their good electrical and thermal conductivity, and chemical stability, which makes them one of the most promising materials to replace metallic counter electrodes in the fabrication of PSCs. This review highlights the recent advances of carbon-based PSCs, where the carbon electrode (CE) is the main actor. CEs have become very promising candidates for PSCs; they are mainly fabricated using a simple combination of graphite and carbon black powders embedded in a binder matrix, giving a paste that is then solution-processable, resulting in devices with improved quality stability, when compared to metallic electrodes. In this review, CE’s composition is emphasized, since it can give both, high and low-temperature processed electrodes, compatible with different device configurations. Finally, the tendencies and opportunities to use CE in PSCs devices are presented.

chemistry, physical,engineering, chemical, applied,energy & fuels
Efficient application of carbon-based nanomaterials for high-performance perovskite solar cells

Ying-Chun Niu,Li-Feng Yang,M. H. Aldamasy,Meng Li,Wen-Jie Lan,Quan Xu,Yuan Liu,Shang-Lei Feng,Ying-Guo Yang

DOI: https://doi.org/10.1007/s12598-020-01680-2

IF: 6.318

2021-03-16

Rare Metals

Abstract:The power conversion efficiency of perovskite solar cells (PSCs) has rapidly risen from 3.8% to over 25.0% in just about one decade, which attracts a lot of attention from the scientific and engineering communities. However, some challenges remain, hindering the progress of commercialization such as intrinsic and extrinsic (environmental) stabilities, which can be improved by an interface and structural engineering. In recent years, some reports indicate that the interfacial engineering using carbon-based nanomaterials additives plays a crucial role in the process of charge carriers and perovskite crystal growth and thereby enhances device performance and operational stability. Here, we review the development of the varieties of carbon-based nanomaterials applications in PSCs, such as hole-transporting layers (HTLs), electron-transporting layers (ETLs), perovskite bulk layer, and their interfaces. Furthermore, we proposed a further suggestion about the optimized preparation conditions for the preparation of PSCs, which may inspire the researcher to discover, design, and manufacture the more efficient perovskite solar cells in academic and industry.<h3 class="a-plus-plus">Graphic abstract</h3>

materials science, multidisciplinary,metallurgy & metallurgical engineering
Recent developments in perovskite materials, fabrication techniques, band gap engineering, and the stability of perovskite solar cells

Naveen Kumar Elangovan,Raju Kannadasan,B.B. Beenarani,Mohammed H. Alsharif,Mun-Kyeom Kim,Z. Hasan Inamul

DOI: https://doi.org/10.1016/j.egyr.2023.12.068

IF: 5.2

2024-01-07

Energy Reports

Abstract:Organic-inorganic hybrid metal halide perovskite solar cells (PSC) represent a novel class of optoelectronic semiconductors that have garnered significant attention from photovoltaic researchers globally. This is due to their continually improving efficiency, straightforward solution processing methods, use of lightweight and cost-effective materials, and other notable features. The advantageous properties of perovskite materials, such as superior charge transport, tunable band gap, and distinctive electronic structure, contribute to their appeal. Over the past 6 to 7 years, diverse device architectures and fabrication techniques for PSC have emerged, achieving an impressive power conversion efficiency (PCE) of 25.7%. This review article primarily focuses on recent advancements in PSC fabrication techniques, synthesis, device architecture, charge transport mechanisms, band gap engineering, and stability. Additionally, it provides a summary of recently reported materials used in various layers of PSC, including the perovskite layer, as well as electron and hole transport layers. Lastly, the article outlines the challenges faced in the development of PSC, offers recommendations, and suggests potential directions for future research to guide the field forward.

energy & fuels
Functional Materials for Fabrication of Carbon-Based Perovskite Solar Cells: Ink Formulation and Its Effect on Solar Cell Performance

Pourjafari,García-Peña,Padrón-Hernandez,Peralta-Domínguez,Castro-Chong,Nabil,Avilés-Betanzos,Oskam

DOI: https://doi.org/10.3390/ma16113917

IF: 3.4

2023-05-24

Materials

Abstract:Perovskite solar cells (PSCs) have rapidly developed into one of the most attractive photovoltaic technologies, exceeding power conversion efficiencies of 25% and as the most promising technology to complement silicon-based solar cells. Among different types of PSCs, carbon-based, hole-conductor-free PSCs (C-PSCs), in particular, are seen as a viable candidate for commercialization due to the high stability, ease of fabrication, and low cost. This review examines strategies to increase charge separation, extraction, and transport properties in C-PSCs to improve the power conversion efficiency. These strategies include the use of new or modified electron transport materials, hole transport layers, and carbon electrodes. Additionally, the working principles of various printing techniques for the fabrication of C-PSCs are presented, as well as the most remarkable results obtained from each technique for small-scale devices. Finally, the manufacture of perovskite solar modules using scalable deposition techniques is discussed.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Carbon Materials in Perovskite Solar Cells: Prospects and Future Challenges

Victoria Ferguson,S. Ravi P. Silva,Wei Zhang

DOI: https://doi.org/10.1002/eem2.12035

2019-06-01

Abstract:Metal halide perovskite solar cells are emerging candidates for next‐generation thin‐film photovoltaic devices with the potential for extremely low fabrication cost and high power conversion efficiency. Perovskite solar cells have demonstrated a rapid development in device performance over the last decade, from an initial 3.81% to a most recently certified 24.2%, though the challenges of long‐term stability and lead toxicity still remain. Carbon materials, ranging from zero‐dimensional carbon quantum dots to three‐dimensional carbon black materials, are promising candidates for the enhancement of both efficiency and stability of perovskite solar cells, offering unique advantages for incorporation into various device architectures. In this review article, we present a concise overview of important and exciting advancements of perovskite solar cells that incorporate different dimensions of carbon material in their device architectures in an effort to simultaneously improve device performance and long‐term stability. We also discuss the major advantages and potential challenges of each technique that has been developed in the most recent work. Finally, we outline the future opportunities toward more efficient and stable perovskite solar cells utilizing carbon materials.

materials science, multidisciplinary
Stabilizing and Scaling Up Carbon-Based Perovskite Solar Cells

Chen Haining,Yang Shihe

DOI: https://doi.org/10.1557/jmr.2017.294

2017-01-01

Abstract:Organometal trihalide perovskite solar cells (PSCs) have sparked a frantic excitement in the scientific community because they can achieve high power conversion efficiencies (PCEs) even when fabricated by low-cost solution-processing technologies. However, the poor stability of PSCs has seriously hindered their commercialization. Among various kinds of PSCs, carbon-based PSCs without hole transport materials (C-PSCs) seem to be the most promising for addressing the stability issue because carbon materials are stable, inert to ion migration, and inherently water-resistant. Concurrent with the steady rise in PCE of C-PSCs, great progresses have also been attained on the device stability and scaling-up fabrication of C-PSCs, which have well signified the possible commercialization of PSCs in the near future. In this review, we will summarize these progresses with a view of exposing the promising prospect. We start by collating recent stability testing results of C-PSCs with reference to those of HTM-PSCs. Then, we update the research status on large-scale C-PSCs and their associated scalable fabrication technologies. Finally, we identify main issues to be addressed alongside future research directions.
Methods and strategies for achieving high-performance carbon-based perovskite solar cells without hole transport materials

Haining Chen,Shihe Yang

DOI: https://doi.org/10.1039/c9ta04707g

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Perovskite solar cells (PSCs) have garnered great attention from the scientific community due to their high power conversion efficiency (PCE) achieved via low-cost and solution-processed fabrication techniques. However, their low stability has hindered their commercialization. Replacing hole transport materials (HTMs) and Au electrodes with carbon electrodes is a promising way to address the stability issues of PSCs because carbon materials are stable, inert to ion migration, and inherently water-resistant. So far, carbon-based PSCs without HTMs (C-PSCs) have seen much progress and their PCEs have been promoted to above 16%. Herein, we comb through the recent developments in designing, fabricating and optimizing high-performance C-PSCs. First, some key issues peculiar to C-PSCs in terms of the device structure and working principles of C-PSCs, which are different from those of HTM-based PSCs, are stressed. Then, the specific methods and strategies for achieving high-performance C-PSCs are summarized and discussed, which are categorized by the electron transport materials, perovskite layer and carbon electrode. Finally, an outlook is provided, with an aim to point out the promising research directions to further improve device performance and push the technology for commercialization.
Recent Advances in Carbon Nanotube Utilizations in Perovskite Solar Cells

Qiang Luo,Ronggen Wu,Lantian Ma,Chaojun Wang,Hu Liu,Hong Lin,Ning Wang,Yuan Chen,Zhanhu Guo

DOI: https://doi.org/10.1002/adfm.202004765

IF: 19

2020-10-26

Advanced Functional Materials

Abstract:Metal halide perovskite solar cells (PSCs) have emerged as promising next‐generation photovoltaic devices with the maximum output efficiency exceeding 25%. Despite significant advances, there are many challenges to achieve high efficiency, stability, and low‐cost simultaneously. Combating these challenges depends on developing novel materials and modifying conventional device components. Carbon nanotubes (CNTs) have attracted considerable attention for fabricating efficient PSCs owing to their remarkable electrical, optical, and mechanical properties. With their multifunctional features, CNTs can play a wide range of roles and offer unique benefits in various components in PSCs to improve device performance and durability. Here, recent progress concerning the utilizations of CNTs as transparent conductive electrodes, charge‐transporter, perovskite additives, interlayers, hole‐transporting materials, and back electrodes in PSCs is comprehensively reviewed. The application of CNTs toward the development of 1D and 2D flexible PSCs is also discussed. A summary of current challenges and prospective on future research directions of employing CNTs to realize high‐performance PSCs is presented.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Perovskite Solar Cells: A Review of the Recent Advances

Priyanka Roy,Aritra Ghosh,Fraser Barclay,Ayush Khare,Erdem Cuce

DOI: https://doi.org/10.3390/coatings12081089

IF: 3.236

2022-08-01

Coatings

Abstract:Perovskite solar cells (PSC) have been identified as a game-changer in the world of photovoltaics. This is owing to their rapid development in performance efficiency, increasing from 3.5% to 25.8% in a decade. Further advantages of PSCs include low fabrication costs and high tunability compared to conventional silicon-based solar cells. This paper reviews existing literature to discuss the structural and fundamental features of PSCs that have resulted in significant performance gains. Key electronic and optical properties include high electron mobility (800 cm2/Vs), long diffusion wavelength (>1 μm), and high absorption coefficient (105 cm−1). Synthesis methods of PSCs are considered, with solution-based manufacturing being the most cost-effective and common industrial method. Furthermore, this review identifies the issues impeding PSCs from large-scale commercialisation and the actions needed to resolve them. The main issue is stability as PSCs are particularly vulnerable to moisture, caused by the inherently weak bonds in the perovskite structure. Scalability of manufacturing is also a big issue as the spin-coating technique used for most laboratory-scale tests is not appropriate for large-scale production. This highlights the need for a transition to manufacturing techniques that are compatible with roll-to-roll processing to achieve high throughput. Finally, this review discusses future innovations, with the development of more environmentally friendly lead-free PSCs and high-efficiency multi-junction cells. Overall, this review provides a critical evaluation of the advances, opportunities and challenges of PSCs.

materials science, multidisciplinary,physics, applied, coatings & films
Recent progress of graphene‐based materials for efficient charge transfer and device performance stability in perovskite solar cells

Nur E. Safie,Mohd A. Azam,Mohd F.A. Aziz,Mashasriyah Ismail

DOI: https://doi.org/10.1002/er.5876

IF: 4.6

2020-09-02

International Journal of Energy Research

Abstract:The relevance of graphene‐based materials throughout the niche area of perovskite solar cells (PSCs) is indeed the main focus of this review. Specific properties of two types of solar cell materials, namely hybrid perovskites and graphene‐based materials are at the core of significant breakthroughs in a wide range of applications. The specific features of graphene‐based materials, along with their unique properties, have been utilized mainly in the development of photovoltaic devices. PSCs are known to have promising device performance and surpass other third‐generation solar cells, including organic photovoltaics, quantum dot solar cells, and dye‐sensitized solar cells. However, PSCs address several limitations in the device mechanism and material stability. PSCs performance tends to deplete over time due to several factors such as the degradation of materials used in the device caused by exposure of thermal and moisture, as well as an undesired chemical reaction in the interfaces. Several experimental studies, especially on the integration of carbon materials, including the graphene, have been extensively explored. The integration of graphene‐based materials is one of the potential methods for altering and modifying components in PSCs, including perovskite structure and charges transport layers. Therefore, this review gives an overview of recent progress in the development of PSCs with the integration of graphene‐based materials. The emphasis will be on the influence brought by graphene‐based materials on the charge transport mechanism at the interfaces and perovskite morphology toward the improvement of photovoltaic performance and stability.

energy & fuels,nuclear science & technology
Stabilization of Perovskite Solar Cells: Recent Developments and Future Perspectives

Ghazanfar Nazir,Seul‐Yi Lee,Jong‐Hoon Lee,Adeela Rehman,Jung‐Kun Lee,Sang Il Seok,Soo‐Jin Park

DOI: https://doi.org/10.1002/adma.202204380

IF: 29.4

2022-09-16

Advanced Materials

Abstract:Exceptional power conversion efficiency (PCE) of 25.7% in perovskite solar cells (PSCs) has been achieved, which is comparable with their traditional rivals (Si‐based solar cells). However, commercialization‐worthy efficiency and long‐term stability remain a challenge. In this regard, there are increasing studies focusing on the interface engineering in the PSC devices to overcome their poor technical readiness. Herein, we discuss the roles of electrode materials and interfaces in PSCs in terms of their PCEs and perovskite stability. We present all the current knowledge on the factors responsible for the rapid intrinsic and external degradation of PSCs. Then, we focus on the roles of carbonaceous materials as substitutes for noble metals, along with the recent research progress in carbon‐based PSCs. Furthermore, a sub‐category of PSCs, i.e., flexible PSCs, is considered exceptional power sources due to their high power‐to‐weight ratios and figures of merit for next‐generation wearable electronics. Last, we discuss the future perspectives and directions for research in PSCs, with an emphasis on their commercialization. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Carbon‐Based Perovskite Solar Cells without Hole Transport Materials: The Front Runner to the Market?

Haining Chen,Shihe Yang

DOI: https://doi.org/10.1002/adma.201603994

IF: 29.4

2017-01-01

Advanced Materials

Abstract:Organometal trihalide perovskite solar cells (PSCs) have garnered recent interest in the scientific community. In the past few years, they have achieved power conversion efficiencies comparable to traditional commercial solar cells (e.g., crystalline Si, CuInGaSe and CdTe) due to their low-cost of production via solution-processed fabrication techniques. However, the stability of PSCs must be addressed before their commercialization is viable. Among various kinds of PSCs, carbon-based PSCs without hole transport materials (C-PSCs) seem to be the most promising for addressing the stability issue because carbon materials are stable, inert to ion migration (which originates from perovskite and metal electrodes), and inherently water-resistant. Despite the significant development of C-PSCs since they were first reported in 2013, some pending issues still need to be addressed to increase their commercial competitiveness. Herein, recent developments in C-PSCs, including (1) device structure and working principles, (2) categorical progress of and comparison between meso C-PSCs, embedment C-PSCs and paintable PSCs, are reviewed. Promising research directions are then suggested (e.g., materials, interfaces, structure, stability measurement and scaling-up of production) to further improve and promote the commercialization of C-PSCs.
Current advances in perovskite oxides supported on graphene-based materials as interfacial layers of perovskite solar cells

Samantha Ndlovu,Moses A. Ollengo,Edigar Muchuweni,Vincent O. Nyamori

DOI: https://doi.org/10.1080/10408436.2022.2041395

2022-02-18

Critical Reviews in Solid State and Materials Sciences

Abstract:Perovskite solar cells (PSCs) are emerging efficient photovoltaic devices, with record-high power conversion efficiencies (PCE) of more than 25.5%. However, PSCs exhibit some drawbacks, such as poor stability upon exposure to moisture or humidity, ultraviolet (UV) radiation and heat, which in turn limits the device lifetime and performance. In addition, the introduction of perovskite films comes with associated toxicity, which is a major environmental concern. Furthermore, the application of titanium dioxide (TiO2) as an electron transport layer (ETL) and 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (spiro-OMeTAD) as a hole transport layer (HTL), causes device instability. The wide-bandgap characteristic of TiO2 introduces charge carrier recombination in the ETL, which, in turn, impairs device performance. This is, over and above, the high cost of spiro-OMeTAD, coupled with its multi-step synthetic preparation method. To address the aforementioned shortcomings, approaches, such as modifying the interfacial architecture, have been explored by introducing versatile materials between the charge-collecting electrode and the perovskite active layers. In this regard, perovskite oxides are more appealing due to their wide bandgap and high electron mobility. However, perovskite oxides have limitations due to their agglomeration, which causes short-circuits and leakage current, in addition to their poor charge separation efficiency, surface hydrophilicity and weak visible-light absorption. As a result, nanocomposites of perovskite oxides with carbon-based materials, particularly graphene and its derivatives, have attracted significant research attention due to their exceptional optoelectronic properties, superior stability, and non-toxicity of graphene-based materials. Therefore, this review discusses the recent trends in graphene-based materials, their composites with perovskite oxides, effective ETLs or HTLs of PSCs and the subsequent improvement of photovoltaic performance. In addition, a summary of synthetic routes for perovskite oxides/graphene nanocomposites is presented. This review will foster the advancement of the fabrication of PSCs with improved PCE and stability.

materials science, multidisciplinary,physics, condensed matter
Recent Progress of Carbon‐Based Inorganic Perovskite Solar Cells: From Efficiency to Stability

Xiang Zhang,Zhenhua Yu,Dan Zhang,Qidong Tai,Xing‐Zhong Zhao

DOI: https://doi.org/10.1002/aenm.202201320

IF: 27.8

2022-07-19

Advanced Energy Materials

Abstract:The recent progress of carbon‐based inorganic perovskite solar cells in the aspects of efficiency and stability, including the fabrication technique optimization, solvent engineering, composition engineering, interface engineering, as well as the optimization of electron transport layer and carbon electrode, is reviewed, the existing challenges in this field are discussed, and the prospects for further improvement are anticipated. Organic–inorganic hybrid perovskite solar cells (PSCs) are regarded as a promising next‐generation photovoltaic technology. However, poor device stability limits their commercialization. Carbon‐based inorganic PSCs (C‐IPSCs) can meet stability challenge owing to the absence of organic components. Meanwhile, the hydrophobic carbon materials as hole transport layers and back electrodes simplify fabrication process, decrease costs, and protect devices from moisture erosion. Since the first attempt for C‐IPSCs in 2016, a series of strategies have been proposed to improve device performance, including the fabrication technique optimization, solvent engineering, composition engineering, interface engineering, charge transport layer optimization, and so on, and the power conversion efficiency of C‐IPSCs are rapidly increased from initial 5% to exceeding 15%. In this review, the recent progress of C‐IPSCs is summarized, the existing challenges in this field are discussed, followed by a prospect for future development.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Carbon-based Perovskite Solar Cells with Electron and Hole-Transporting/-blocking Layers

Wenjin Yu,Yu Zou,Shining Zhang,Zishi Liu,Cuncun Wu,Bo Qu,Zhijian Chen,Lixin Xiao

DOI: https://doi.org/10.1088/2752-5724/acbbc2

2023-01-01

Materials Futures

Abstract:Towards commercialization of perovskite solar cells (PSCs), further reducing the cost and increasing the stability of PSCs have been the most important tasks of researchers, as the efficiency of single-junction PSCs has reached a competitive level among all kinds of single-junction solar cells. Carbon-electrode-based PSCs (CPSCs), as one of the most promising constructions for achieving stable economical PSCs, now attract enormous attention for their cost-effectiveness and stability. Here, we briefly review the development of CPSCs and reveal the importance of n-i-p architecture for state-of-the-art CPSCs. However, despite their promising potential, challenges still exist in CPSCs in the n-i-p architecture, which mainly stem from the incompact contact of the hole-transporting layer (HTL)/carbon electrode. Thus, new carbon materials and/or novel manufacturing methods should be proposed. In addition, HTL is yet to be appropriate for state-of-the-art CPSCs because the fabrication of carbon electrode could result in the destruction of the underlayer. To further enhance the performance of CPSCs, both the HTL and electron transport layer as well as their interfaces with perovskite active layer need to be improved. We recommend that the perovskite active layer, with its long carrier lifetime, strong carrier transport capability, and long-term stability, is necessary as well for improved performance of CPSCs. We also highlight current researches on CPSCs and provide a systematic review of various types of regulation tools.
A Review on Emerging Efficient and Stable Perovskite Solar Cells Based on g-C3N4 Nanostructures

Konstantina Gkini,Ioanna Martinaiou,Polycarpos Falaras

DOI: https://doi.org/10.3390/ma14071679

IF: 3.4

2021-03-29

Materials

Abstract:Perovskite solar cells (PSCs) have attracted great research interest in the scientific community due to their extraordinary optoelectronic properties and the fact that their power conversion efficiency (PCE) has increased rapidly in recent years, surpassing other 3rd generation photovoltaic (PV) technologies. Graphitic carbon nitride (g-C3N4) presents exceptional optical and electronic properties and its use was recently expanded in the field of PSCs. The addition of g-C3N4 in the perovskite absorber and/or the electron transport layer (ETL) resulted in PCEs exceeding 22%, mainly due to defects passivation, improved conductivity and crystallinity as well as low charge carriers’ recombination rate within the device. Significant performance increase, including stability enhancement, was also achieved when g-C3N4 was applied at the PSC interfaces and the observed improvement was attributed to its wetting (hydrophobic/hydrophilic) nature and the fine tuning of the corresponding interface energetics. The current review summarizes the main innovations for the incorporation of graphitic carbon nitride in PSCs and highlights the significance and perspectives of the g-C3N4 approach for emerging highly efficient and robust PV devices.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Perovskite Solar Cells: Progress and Advancements

Naveen Kumar Elumalai,Arafat Mahmud,Dian Wang,Ashraf Uddin,Naveen Elumalai,Md Mahmud

DOI: https://doi.org/10.3390/en9110861

IF: 3.2

2016-10-25

Energies

Abstract:Organic–inorganic hybrid perovskite solar cells (PSCs) have emerged as a new class of optoelectronic semiconductors that revolutionized the photovoltaic research in the recent years. The perovskite solar cells present numerous advantages include unique electronic structure, bandgap tunability, superior charge transport properties, facile processing, and low cost. Perovskite solar cells have demonstrated unprecedented progress in efficiency and its architecture evolved over the period of the last 5–6 years, achieving a high power conversion efficiency of about 22% in 2016, serving as a promising candidate with the potential to replace the existing commercial PV technologies. This review discusses the progress of perovskite solar cells focusing on aspects such as superior electronic properties and unique features of halide perovskite materials compared to that of conventional light absorbing semiconductors. The review also presents a brief overview of device architectures, fabrication methods, and interface engineering of perovskite solar cells. The last part of the review elaborates on the major challenges such as hysteresis and stability issues in perovskite solar cells that serve as a bottleneck for successful commercialization of this promising PV technology.

energy & fuels

Acquired immunity and vaccination in malaria.

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Application of Carbon Materials in Conductive Electrodes for Perovskite Solar Cells

[Interpretation of mechanograms].

Current status and trends of carbon-based electrodes for fully solution-processed perovskite solar cells

Efficient application of carbon-based nanomaterials for high-performance perovskite solar cells

Recent developments in perovskite materials, fabrication techniques, band gap engineering, and the stability of perovskite solar cells

Functional Materials for Fabrication of Carbon-Based Perovskite Solar Cells: Ink Formulation and Its Effect on Solar Cell Performance

Carbon Materials in Perovskite Solar Cells: Prospects and Future Challenges

Stabilizing and Scaling Up Carbon-Based Perovskite Solar Cells

Methods and strategies for achieving high-performance carbon-based perovskite solar cells without hole transport materials

Recent Advances in Carbon Nanotube Utilizations in Perovskite Solar Cells

Perovskite Solar Cells: A Review of the Recent Advances

Recent progress of graphene‐based materials for efficient charge transfer and device performance stability in perovskite solar cells

Stabilization of Perovskite Solar Cells: Recent Developments and Future Perspectives

Carbon‐Based Perovskite Solar Cells without Hole Transport Materials: The Front Runner to the Market?

Current advances in perovskite oxides supported on graphene-based materials as interfacial layers of perovskite solar cells

Recent Progress of Carbon‐Based Inorganic Perovskite Solar Cells: From Efficiency to Stability

Carbon-based Perovskite Solar Cells with Electron and Hole-Transporting/-blocking Layers

A Review on Emerging Efficient and Stable Perovskite Solar Cells Based on g-C3N4 Nanostructures

Perovskite Solar Cells: Progress and Advancements