A decrease in the metabolic clearance rate of progesterone in the coypu during pregnancy.

D. Illingworth,R. Heap

Abstract:

What problem does this paper attempt to address?

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Nanjing Agricultural University,Wang Tongyue,Wang Xianfa,Jiang Ye,Xue Jianxun,Liu Xiao,Jiang Yan,Chen Zhipeng

DOI: https://doi.org/10.1007/s11106-020-00176-z

2020-01-01

Powder Metallurgy and Metal Ceramics

Abstract:The high entropy alloy (HEA) coatings are potential candidates for advanced application in the protection of steel and other traditional alloys due to their excellent physical and mechanical performance. The AlCoCrFeNi alloy series were favorably studied due to comparably low cost and stable performance. In this research, the AlCoCrFeNi coatings were prepared through surface mechanical abrasion treatment (SMAT). The process implied the comprehensive effect of cold welding and friction. The submicron-size SiC particles were added into the raw materials in different amounts. For SMAT, a high-energy ball milling method was adopted to promote the alloying of metals, disperse SiCp, and combine the powder to the carbon steel substrate. Afterward, the phase composition, microstructure of coatings, and distribution of reinforcement were detected through XRD and SEM analysis, separately, and the effect of SiC particles content on the properties of the coatings was analyzed. The results show that the addition of submicron-sized SiC significantly improved the density and stiffness of the HEA coating and diminished defects and surface roughness. Сoatings containing SiC display enhanced adhesion force and wear resistance. The proposed mechanism is that the submicron SiC particles promoted mechanical alloying of pure metal and intensified the adherence and cold welding of the coating. Especially, herein, the addition of 15 wt.% SiC granted the best comprehensive properties of the coating. Excessive SiC content led to the deterioration of coating plasticity and the growth of cracks.
Evaluation of Brainstorming Session as a Teaching-learning Tool among Postgraduate Medical Biochemistry Students

B. Goswami,Anju Jain,B. Koner

DOI: https://doi.org/10.4103/ijabmr.IJABMR_191_17

2017-12-01

International Journal of Applied and Basic Medical Research

Abstract:Background: The thrust for postgraduate teaching should be self-directed learning with equal participation by all students in academic discussions. Group discussions involve conduction of the discourse by a leader who guides the discussion as well as points out any wrong information. This discourages quieter students from participation with the fear of rebuke. Brainstorming is devoid of all such fallacies with no judgment and reprimand. Aim: The aim of this study was to use brainstorming as a teaching-learning tool among postgraduate students of medical biochemistry. Materials and Methods: The project was commenced after due approvals from the research and ethical committee. The participants were enrolled after informed consent and sensitization. All the pro forma and questionnaires were duly validated by experts. After piloting and incorporation of the suggestions for improvisation, the main sessions were planned and implemented. The response was judged by posttest scores and feedback forms. Results: There was an improvement of understanding of the biochemical concepts as assessed by the posttest scores and solving of a similar clinical problem. The students expressed satisfaction with the conduction, timing, and discussion of the clinical problems. The drawbacks of traditional teaching as expressed during the feedback stage were also taken care of by the brainstorming sessions. Conclusions: Our project made the students and the faculty aware about the utility of brainstorming for teaching purposes in medical education which till now was considered efficacious only for troubleshooting in advertising and management institutions. The students were satisfied with this technique for understanding of biochemical concepts.
Modelling and simulation and ergonomic standards as support tools for a workstation design in manufacturing system

A. Cimino,G. Mirabelli

DOI: https://doi.org/10.1504/IJSPM.2010.032660

2008-09-25

International Journal of Simulation and Process Modelling

Abstract:It is the intent of the work to achieve the ergonomic effective design of a workstation belonging to an industrial plant operating in the field of mechanical parts production. To this end, the authors propose an approach based on the integration of modelling and simulation tools and several ergonomic standards. Modelling and simulation tools are used to implement a three-dimensional environment capable of recreating, with satisfactory accuracy, the evolution over the time of the real workstation. The ergonomic standards are accomplished for evaluating and analysing the ergonomic risk level within the system being considered. Workstation modifications are incorporated in the simulation model and the effects (ergonomic risk level) of those changes are analysed for designing an improved workstation configuration in terms of interaction between operators and their industrial working environment.
Investigation of Silicon Carbon Nitride Nanocomposite Films As a Wear Resistant Layer in Vitro and in Vivo for Joint Replacement Applications.

Y. Liang,D. G. Liu,W. Q. Bai,J. P. Tu

DOI: https://doi.org/10.1016/j.colsurfb.2017.02.010

IF: 5.999

2017-01-01

Colloids and Surfaces B Biointerfaces

Abstract:Silicon-contained CNx nanocomposite films were prepared using the ion beam assisted magnetron sputtering under different nitrogen gas pressure. With increase of the nitrogen pressure, silicon and nitrogen content of the CNx films drastically increase, and is saturated as the PN2 reach about 40%. Surface roughness and the contact angle are increase, while the friction coefficient decreased. The CNx film with 5.7at.% Si content possess the lowest friction coefficient of only 0.07, and exhibited the best tribological properties. The impact of CNx films with different silicon content on the growth and the activation of osteoblasts were compared to that of Ti6Al4V. The incorporation of silicon in the CNx film also showed an increase cell adhesion. Bonding structure and surface energy were determined to be the factors contributing to the improved biocompatibility. Macrophages attached to 5.7at.% Si contained CNx films down regulated their production of cytokines and chemokines. Moreover, employed with Si contained CNx coated joint replacements, which were implanted subcutaneously into Sprague-Dawley mice for up to 36days, the tissue reaction and capsule formation was significantly decreased compared to that of Ti6Al4V. A mouse implantation study demonstrated the excellent in vivo biocompatibility and functional reliability of wear resist layer for joint replacements with a Si doped a-CNx coating for 36days.
Comparison of the different strategies for cryopreserving and storage of the bone marrow CD34+ cells. Possibility of unprogrammed rate freezing and storage at -80 degrees C mechanical freezer.

J. Ratajczak,W. Marlicz,T. Rozmysłowicz,B. Machalinski,M. Ratajczak

1996-12-13

Annals of Transplantation

Abstract:We have compared the efficiency of the different strategies allowing for a long term storage of a human CD34+ bone marrow cells. Accordingly, the aliquots of CD34+ cells isolated from bone marrow were frozen using: controlled rate freezing equipment, or freezer unprogrammed in a -80 degrees C mechanical freezer. After freezing, CD34+ cells were subsequently stored for one month in a liquid nitrogen tank at -196 degrees C or in mechanical freezer at -80 degrees C. We have found that both the viability and the recovery of clonogeneic progenitors of CD34+ cells samples stored at different temperature were similar. Therefore, regarding the costs and simplicity, we recommend the unprogrammed freezing and storage of human CD34+ cells at -80 degrees C in a mechanical freezer as a convenient, inexpensive, and reliable method for storing marrow for transplantation. This data also indirectly indicate that the aliquots of the CD34+ cells can be shipped frozen on dry ice (-80 degrees C), and that these cells will maintain viability under this conditions. Furthermore, in this study we have confirmed validity of our earlier observation that human CFU-Meg progenitors are more sensitive to cryopreservation.
Nanocoating of Diazoresin/Polysaccharides Multilayer Boosts Biocompatibility of Nitinol Biomedical Devices

Meng Liu,Xiuli Yue,Shen Dong,Yan Ma,Zhengbao Zha,Zhifei Dai

DOI: https://doi.org/10.2174/157341311798220745

IF: 1.513

2011-01-01

Current Nanoscience

Abstract:The surface of a biomaterial and a biological environment are key factors determining the biocompatibility of the material. Determining biocompatibility of medical implants is a critical step toward approval and clinical application. In this study, the biocompatibility of a covalently attached nanocoating of alginate(Alg)/diazoresin(DR)/heparin(Hep) multilayer has been evaluated by thrombin inactivation, protein adsorption, leukocyte adhesion, cytotoxicity in vitro and subcutaneous implantation in vivo. It was found that the outermost layer of the coating played a key role on anticoagulant activity. No significant difference was seen in albumin adsorption between uncoated and coated one. However, the fibrinogen adsorption on DR/polysaccharides coatings was lower than the uncoated Nitinol. Compared with the uncoated Nitinol surface, DR/polysaccharides multilayer coating presented a drastically reduced adhesion in vitro of polymorphonuclear neutrophil leukocytes (PMN) and peripheral blood mononuclear cells (PBMC). Cell biocompatibility tests indicated that the nanocoating of DR/polysaccharides multilayer did not lead to an increase in the cytotoxicity of the Nitinol and the adherent cells maintained good viability. Subcutaneous implantation in C57BL/6 mice suggested that the coated Nitinol had good tissue biocompatibility. The use of alginate interlayer for heparin immobilization instead of proteins such as albumin, collagen, and gelatin may avoid the risk of contamination with pathogenic agents. Hence, the nanocoating of covalently attached DR/polysaccharide multilayer boosts the biocompatibility of Nitinol biomedical devices.
Are Ni-SiC Nanoparticle Electroplated Coatings a Safer Alternative to Hard Chromium? A Comprehensive Aging, Toxicity, and In Silico Studies to Assess Safety by Design

Swaroop Chakraborty,Nathan Langford,Yvonne Kohl,Dimitra-Danai Varsou,Sascha Wien,William Stokes,Evangelos Papaioannou,Kata Berkesi,Andrew Britton,Bashiru Ibrahim,Antreas Afantitis,Alexandros Zoikis Karathanasis,Laurence Andrew Nelson,Eugenia Valsami-Jones

DOI: https://doi.org/10.1039/d4en00751d

2024-11-13

Environmental Science Nano

Abstract:Considering the increasing interest in utilising nanoparticles (NPs) for advanced, safe, and sustainable coatings, this paper addresses the toxicological concerns associated with Nickel-Silicon Carbide (Ni-SiC) electroplated nanocomposite coatings as an alternative to conventional chromium electrodeposition. We present Ni-SiC nanocomposite coatings as potential substitutes and conduct a comprehensive investigation into the impact of impregnated SiC particles on coating properties. Specifically, we examined the aging of Ni-watt type and Ni Watt-SiC nanocomposite coatings in various environmental and biological media. Our release and transformation data indicate an enhanced release and transformation of Ni in the simulated media (e.g., up to 200 μg/mL in cell culture media) and the formation of NiO and Ni (OH)2 species as confirmed by XPS analysis. Transmission electron microscopy data reveals the release of SiC NPs in the respective simulated aging medium. The Ni ion release from Ni-watt type and Ni-SiC nanocomposite coating was also investigated in silico to support safe-by-design (SbD) approaches in the development of nanoalloys for electroplating. An invitro cytotoxicity assay, according to ISO shows a significant reduction in cell viability for Ni-SiC nanocomposite coated samples (up to 80% after 72 hours) compared to standalone Ni-Watt type electroplated coatings (up to 20% after 72 hours). Our findings suggest that the co-deposition of Ni with SiC NPs enhances Ni release, which is a major factor in causing toxicity. These results could be pivotal in the adoption of Safe and Sustainable by Design principles within the electroplating industry. This paper contributes to the fields of nanotoxicology and surface coatings, providing a foundation for designing and optimising environmentally friendly, high-performance coatings with broad industrial applications

environmental sciences,chemistry, multidisciplinary,nanoscience & nanotechnology
[Adrenergic innervation of the hypophysis of Triturus alpestris].

J. Doerr-Schott,E. Follénius

1972-05-08

Abstract:
FeMnCSi alloy for degradable pin implants: surface and in vitro characterization

Melina I. Hankovits,Julieta Merlo,Leonardo Rico,Ana V. Druker,Josefina Ballarre,Silvia M. Ceré

DOI: https://doi.org/10.1016/j.matchemphys.2024.129565

IF: 4.778

2024-06-05

Materials Chemistry and Physics

Abstract:Biodegradable metals such iron-based materials, are studied as temporary implants in the orthopedic field due to their adequate mechanical properties, non-toxic degradation products, and the possibility of avoiding a second surgical intervention to remove the device. One strategy to overcome the slow degradation rate of pure Fe is the addition of alloying elements. The aim of this work is to characterize the in vitro behavior of a new FeMnCSi alloy (Fe 26.5Mn 0.5C 1.14Si 0.03P 0.01S), and compare it with the performance of pure iron in simulated body fluid. The alloy performance was characterized in terms of chemical composition, microstructure, hemocompatibility and electrochemical responseIt has been found that FeMnCSi alloy presented a marked and progressive degradation in simulated body fluid after 14 days of immersion, significantly larger than pure Fe. The presence of phosphate-based compounds was confirmed on the surface of the alloy after 1 day of immersion while only after 14 days of immersion was detected on Fe. Additionally, the FeMnCSi alloy demonstrates improved blood compatibility compared to pure iron, indicating its suitability for applications in irrigated areas such as bones.

materials science, multidisciplinary
[Soft tissues, hormones and the skeleton].

I. Z̆ofková

2012-02-01

Abstract:Mechanical load activates bone modeling and increases bone strength. Thus physical activity is extremely important for overall bone health. Muscle volume and muscle contraction are closely related to bone mineral density in men and women, although these relationships are more significat in men. The muscle-bone unit has been defined as a functional system, in which both components are under control of the somatotropin-IGF-I system, androgens and D hormone. These endocrine systems play, via the muscle-bone unit, an important role in development of the skeleton and its stability in adulthood. That is why deficiency of any of these hormonal systems, or reduced physical activity (mainly in childhood) could seriously affect bone density and quality. Bone is also under control of adipose tissue, which modulates its metabolism via mechanical load and more importantly via adipocytokines (leptin, adiponectin and rezistin). Leptin increases bone formation by activation of osteoblasts. This direct effect of leptin is amplified by stimulation of the β-1 adrenergic system, which inhibits the negative osteotropic effects of neuropeptide Y. On the other hand, leptin also activates β-2 adrenergic receptors, which increase bone resorption. In humans, the overall osteo-anabolic effect of leptin tends to be dominant. Furthermore, leptin has a principal role in the start of puberty in girls and maturation, remodeling and development of the female skeleton. Adiponectin (and probably rezistin) has an unambiguous deteriorating effect on the skeleton. Further studies are needed to confirm the clinical importance of soft tissues relative to the integrity of the skeleton.
SiONx Coating Regulates Mesenchymal Stem Cell Antioxidant Capacity via Nuclear Erythroid Factor 2 Activity under Toxic Oxidative Stress Conditions

Neelam Ahuja,Kamal Awad,Su Yang,He Dong,Antonios Mikos,Pranesh Aswath,Simon Young,Marco Brotto,Venu Varanasi

DOI: https://doi.org/10.3390/antiox13020189

IF: 7.675

2024-02-01

Antioxidants

Abstract:Healing in compromised and complicated bone defects is often prolonged and delayed due to the lack of bioactivity of the fixation device, secondary infections, and associated oxidative stress. Here, we propose amorphous silicon oxynitride (SiONx) as a coating for the fixation devices to improve both bioactivity and bacteriostatic activity and reduce oxidative stress. We aimed to study the effect of increasing the N/O ratio in the SiONx to fine-tune the cellular activity and the antioxidant effect via the NRF2 pathway under oxidative stress conditions. The in vitro studies involved using human mesenchymal stem cells (MSCs) to examine the effect of SiONx coatings on osteogenesis with and without toxic oxidative stress. Additionally, bacterial growth on SiONx surfaces was studied using methicillin-resistant Staphylococcus aureus (MRSA) colonies. NRF2 siRNA transfection was performed on the hMSCs (NRF2-KD) to study the antioxidant response to silicon ions. The SiONx implant surfaces showed a >4-fold decrease in bacterial growth vs. bare titanium as a control. Increasing the N/O ratio in the SiONx implants increased the alkaline phosphatase activity >1.5 times, and the other osteogenic markers (osteocalcin, RUNX2, and Osterix) were increased >2-fold under normal conditions. Increasing the N/O ratio in SiONx enhanced the protective effects and improved cell viability against toxic oxidative stress conditions. There was a significant increase in osteocalcin activity compared to the uncoated group, along with increased antioxidant activity under oxidative stress conditions. In NRF2-KD cells, there was a stunted effect on the upregulation of antioxidant markers by silicon ions, indicating a role for NRF2. In conclusion, the SiONx coatings studied here displayed bacteriostatic properties. These materials promoted osteogenic markers under toxic oxidative stress conditions while also enhancing antioxidant NRF2 activity. These results indicate the potential of SiONx coatings to induce in vivo bone regeneration in a challenging oxidative stress environment.

biochemistry & molecular biology,chemistry, medicinal,food science & technology
Microstructure and electrochemical properties of Cr– Si–C–N coatings as biological dry electrode

Zhiwei Wu,Shulong Li,Ning Wang,Tao Zhou

DOI: https://doi.org/10.1016/j.matchemphys.2023.128212

IF: 4.778

2023-07-27

Materials Chemistry and Physics

Abstract:Bio-electrode Cr–Si–C–N coatings were fabricated on glass and Si wafer substrates via unbalanced magnetron sputtering. Their microstructure and mechanical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and nano-indentation, respectively. The Cr–Si–C–N coatings exhibited a composite structure consisting of Cr(C, N) nanocrystals embedded in an amorphous matrix of a-SiNx, a-SiCN and a-C/a-CN. The nano-hardness of the coatings decreases with an increase in graphite target current or Si target power due to the formation of more amorphous phase. CrSiCN-3A deposited under high N2 flow (25sccm) and graphite target current (3A) exhibited the lowest open-circuit voltage (OCP, 0.119V) due to its more amorphous phase. CrSiCN–800W demonstrated maximum potential drift of 7 mV, current drift of 0.01 μA and minimum noise resistance, indicating poor corrosion resistance attributed to its low silicon content (1.9 at%) and high crystallinity (70.7%). The grain size of the coatings was not significantly affected by increasing Si target power from 1000W to 1200W, but only resulted in a reduction in crystallinity. The OCP and contact resistance exhibited an initial decrease followed by an increase with increasing Si target power. Notably, CrSiCN–1000W demonstrated the lowest potential and current drift (0.19 mV, 0.0001 μA) as well as contact impedance due to its large grain size and distinct columnar microstructure.

materials science, multidisciplinary
Interactions between sub-10 nm iron and cerium oxide nanoparticles and 3T3 fibroblasts : the role of the coating and aggregation state

M. Safi,H. Sarrouj,O. Sandre,N. Mignet,J. -F. Berret,J.-F. Berret

DOI: https://doi.org/10.48550/arXiv.1011.1670

2010-11-07

Materials Science

Abstract:Recent nanotoxicity studies revealed that the physico-chemical characteristics of engineered nanomaterials play an important role in the interactions with living cells. Here, we report on the toxicity and uptake of the cerium and iron oxide sub-10 nm nanoparticles by NIH/3T3 mouse fibroblasts. Coating strategies include low-molecular weight ligands (citric acid) and polymers (poly(acrylic acid), MW = 2000 g mol-1). Electrostatically adsorbed on the surfaces, the organic moieties provide a negatively charged coating in physiological conditions. We find that most particles were biocompatible, as exposed cells remained 100% viable relative to controls. Only the bare and the citrate-coated nanoceria exhibit a slight decrease of the mitochondrial activity for cerium concentrations above 5 mM (equivalent to 0.8 g L-1). We also observe that the citrate-coated particles are internalized by the cells in large amounts, typically 250 pg per cell after a 24 h incubation for iron oxide. In contrast, the polymer-coated particles are taken up at much lower rates (< 30 pg per cell). The strong uptake shown by the citrate-coated particles is related to the destabilization of the dispersions in the cell culture medium and their sedimentation down to the cell membranes. In conclusion, we show that the uptake of nanomaterials by living cells depends on the coating of the particles and on its ability to preserve the colloidal nature of the dispersions.
CsrA and Cra Influence Shigella flexneri Pathogenesis

Aja L. Gore,S. Payne

DOI: https://doi.org/10.1128/IAI.00589-10

2010-08-16

Infection and Immunity

Abstract:ABSTRACT Shigella flexneri is a facultative intracellular pathogen that invades and disrupts the colonic epithelium. In order to thrive in the host, S. flexneri must adapt to environmental conditions in the gut and within the eukaryotic cytosol, including variability in the available carbon sources and other nutrients. We examined the roles of the carbon consumption regulators CsrA and Cra in a cell culture model of S. flexneri virulence. CsrA is an activator of glycolysis and a repressor of gluconeogenesis, and a csrA mutant had decreased attachment and invasion of cultured cells. Conversely, Cra represses glycolysis and activates gluconeogenesis, and the cra mutant had an increase in both attachment and invasion compared to the wild-type strain. Both mutants were defective in plaque formation. The importance of the glycolytic pathway in invasion and plaque formation was confirmed by testing the effect of a mutation in the glycolysis gene pfkA. The pfkA mutant was noninvasive and had cell surface alterations as indicated by decreased sensitivity to SDS and an altered lipopolysaccharide profile. The loss of invasion by the csrA and pfkA mutants was due to decreased expression of the S. flexneri virulence factor regulators virF and virB, resulting in decreased production of Shigella invasion plasmid antigens (Ipa). These data indicate that regulation of carbon metabolism and expression of the glycolysis gene pfkA are critical for synthesis of the virulence gene regulators VirF and VirB, and both the glycolytic and gluconeogenic pathways influence steps in S. flexneri invasion and plaque formation.
Composite Nanocoatings of Biomedical Magnesium Alloy Implants: Advantages, Mechanisms, and Design Strategies

Dan Li,Danni Dai,Gege Xiong,Shuquan Lan,Chao Zhang

DOI: https://doi.org/10.1002/advs.202300658

IF: 15.1

2023-04-27

Advanced Science

Abstract:Composite nanocoatings can improve corrosion resistance and bioefficacy of biomedical magnesium alloy implants by the particle size dominance and impermeability of nanomaterials, and their specific biological effects and drug‐carrying by those with porous or core–shell structures. They can facilitate the application of magnesium alloys in the management of fractures, bone defects, atherosclerosis, esophageal or biliary stenosis, and other diseases. The rapid degradation of magnesium (Mg) alloy implants erodes mechanical performance and interfacial bioactivity, thereby limiting their clinical utility. Surface modification is among the solutions to improve corrosion resistance and bioefficacy of Mg alloys. Novel composite coatings that incorporate nanostructures create new opportunities for their expanded use. Particle size dominance and impermeability may increase corrosion resistance and thereby prolong implant service time. Nanoparticles with specific biological effects may be released into the peri‐implant microenvironment during the degradation of coatings to promote healing. Composite nanocoatings provide nanoscale surfaces to promote cell adhesion and proliferation. Nanoparticles may activate cellular signaling pathways, while those with porous or core–shell structures may carry antibacterial or immunomodulatory drugs. Composite nanocoatings may promote vascular reendothelialization and osteogenesis, attenuate inflammation, and inhibit bacterial growth, thus increasing their applicability in complex clinical microenvironments such as those of atherosclerosis and open fractures. This review combines the physicochemical properties and biological efficiency of Mg‐based alloy biomedical implants to summarize the advantages of composite nanocoatings, analyzes their mechanisms of action, and proposes design and construction strategies, with the purpose of providing a reference for promoting the clinical application of Mg alloy implants and to further the design of nanocoatings.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Characteristics of Si (C,N) Silicon Carbonitride Layers on the Surface of Ni-Cr Alloys Used in Dental Prosthetics

Leszek Klimek,Marcin Makówka,Anna Sobczyk-Guzenda,Zofia Kula

DOI: https://doi.org/10.3390/ma17102450

2024-05-19

Abstract:Chromium- and cobalt-based alloys, as well as chrome-nickel steels, are most used in dental prosthetics. Unfortunately, these alloys, especially nickel-based alloys, can cause allergic reactions. A disadvantage of these alloys is also insufficient corrosion resistance. To improve the properties of these alloys, amorphous Si (C,N) coatings were deposited on the surfaces of metal specimens. This paper characterizes coatings of silicon carbide nitrides, deposited by the magnetron sputtering method on the surface of nickel-chromium alloys used in dental prosthetics. Depending on the deposition parameters, coatings with varying carbon to nitrogen ratios were obtained. The study analyzed their structure and chemical and phase composition. In addition, a study of surface wettability and surface roughness was performed. Based on the results obtained, it was found that amorphous coatings of Si (C,N) type with thicknesses of 2 to 4.5 µm were obtained. All obtained coatings increase the value of surface free energy. The study showed that Si (C,N)-type films can be used in dental prosthetics as protective coatings.
Studies of metabolism in embryonic development. II. Biosynthesis of lipids in embryonated trout ova.

C. Terner,L. A. Kumar,T. Choe

DOI: https://doi.org/10.1016/0010-406X(68)90806-2

1968-03-01

Abstract:
Degradation, Hemolysis, and Cytotoxicity of Silane Coatings on Biodegradable Magnesium Alloy

X. N. Gu,H. M. Gu,F. Wang,Y. Lu,W. T. Lin,J. Li,Y. F. Zheng,Y. B. Fan

DOI: https://doi.org/10.1016/j.matlet.2017.01.136

IF: 3

2017-01-01

Materials Letters

Abstract:The major obstacle to the clinical use of magnesium alloys is their fast degradation behaviors. In the present study, the triethoxy(octyl)silane coatings were electrodeposited on magnesium alloy to improve the corrosion resistance and biocompatibility. The effects of the electrodeposition potential on the corrosion properties of the silane coatings were investigated. The resulted coatings were characterized by SEM, FTIR, surface hydrophobicity, in addition, the corrosion behaviors and biocompatibilities were also evaluated. The results indicated that the coatings deposited at -2.0 V were more corrosion resistant than the other two silane coatings. Furthermore, the silane coatings showed good biocompatibilities, as demonstrated by significant increased cell viability, reduced hemolysis and platelet adhesion. (C) 2017 Elsevier B.V. All rights reserved.
Properties of SiCN Films Relevant to Dental Implant Applications

Xinyi Xia,Chao-Ching Chiang,Sarathy K. Gopalakrishnan,Aniruddha V. Kulkarni,Fan Ren,Kirk J. Ziegler,Josephine F. Esquivel-Upshaw

DOI: https://doi.org/10.3390/ma16155318

IF: 3.4

2023-07-29

Materials

Abstract:The application of surface coatings is a popular technique to improve the performance of materials used for medical and dental implants. Ternary silicon carbon nitride (SiCN), obtained by introducing nitrogen into SiC, has attracted significant interest due to its potential advantages. This study investigated the properties of SiCN films deposited via PECVD for dental implant coatings. Chemical composition, optical, and tribological properties were analyzed by adjusting the gas flow rates of NH3, CH4, and SiH4. The results indicated that an increase in the NH3 flow rate led to higher deposition rates, scaling from 5.7 nm/min at an NH3 flow rate of 2 sccm to 7 nm/min at an NH3 flow rate of 8 sccm. Concurrently, the formation of N-Si bonds was observed. The films with a higher nitrogen content exhibited lower refractive indices, diminishing from 2.5 to 2.3 as the NH3 flow rate increased from 2 sccm to 8 sccm. The contact angle of SiCN films had minimal differences, while the corrosion rate was dependent on the pH of the environment. These findings contribute to a better understanding of the properties and potential applications of SiCN films for use in dental implants.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Antibodies in human sera recognizing a recombinant outer membrane protein encoded by the envelope gene of the human endogenous retrovirus K.

W. Vogetseder,Andrea Dumfahrt,Peter Mayersbach,Dietmar Schönitzer,M. Dierich

DOI: https://doi.org/10.1089/AID.1993.9.687

1993-07-01

AIDS Research and Human Retroviruses

Abstract:Human endogenous retrovirus (HERV) K is present in about 50 copies in the human genome and transcription of HERV-K has previously been detected in several tumor cell lines as well as in peripheral blood lymphocytes from healthy donors. By means of immunoblotting we investigated the presence of antibodies recognizing recombinant HERV-K-envelope outer membrane constructs in different serum collectives. A total of 12.6% of sera obtained from normal blood donors was found positive. In serum collectives from breast carcinoma patients, HIV-1-positive individuals, and persons with cytomegalovirus infections no significant difference from the normal blood donor serum collective could be observed. Only a group of persons with a repeatedly raised serum neopterin concentration (> 10 nmol/liter) of unknown cause (HIV and hepatitis B and C virus infections were excluded) showed a significant higher percentage of HERV-K-outer membrane envelope-positive sera (21%). Furthermore we could observe a parallel HIV-1/HERV-K seroconversion, which probably is not due to an HIV-1/HERV-K-outer membrane envelope cross-reactivity. Possible implications of these findings are discussed.

A decrease in the metabolic clearance rate of progesterone in the coypu during pregnancy.

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Evaluation of Brainstorming Session as a Teaching-learning Tool among Postgraduate Medical Biochemistry Students

Modelling and simulation and ergonomic standards as support tools for a workstation design in manufacturing system

Investigation of Silicon Carbon Nitride Nanocomposite Films As a Wear Resistant Layer in Vitro and in Vivo for Joint Replacement Applications.

Comparison of the different strategies for cryopreserving and storage of the bone marrow CD34+ cells. Possibility of unprogrammed rate freezing and storage at -80 degrees C mechanical freezer.

Nanocoating of Diazoresin/Polysaccharides Multilayer Boosts Biocompatibility of Nitinol Biomedical Devices

Are Ni-SiC Nanoparticle Electroplated Coatings a Safer Alternative to Hard Chromium? A Comprehensive Aging, Toxicity, and In Silico Studies to Assess Safety by Design

[Adrenergic innervation of the hypophysis of Triturus alpestris].

FeMnCSi alloy for degradable pin implants: surface and in vitro characterization

[Soft tissues, hormones and the skeleton].

SiONx Coating Regulates Mesenchymal Stem Cell Antioxidant Capacity via Nuclear Erythroid Factor 2 Activity under Toxic Oxidative Stress Conditions

Microstructure and electrochemical properties of Cr– Si–C–N coatings as biological dry electrode

Interactions between sub-10 nm iron and cerium oxide nanoparticles and 3T3 fibroblasts : the role of the coating and aggregation state

CsrA and Cra Influence Shigella flexneri Pathogenesis

Composite Nanocoatings of Biomedical Magnesium Alloy Implants: Advantages, Mechanisms, and Design Strategies

Characteristics of Si (C,N) Silicon Carbonitride Layers on the Surface of Ni-Cr Alloys Used in Dental Prosthetics

Studies of metabolism in embryonic development. II. Biosynthesis of lipids in embryonated trout ova.

Degradation, Hemolysis, and Cytotoxicity of Silane Coatings on Biodegradable Magnesium Alloy

Properties of SiCN Films Relevant to Dental Implant Applications

Antibodies in human sera recognizing a recombinant outer membrane protein encoded by the envelope gene of the human endogenous retrovirus K.