[Flexible endoscope in thoracic surgery: CITES or cVATS?].

J. Assouad,H. Fenane,H. Masmoudi,M. Giol,A. Karsenti,V. Gounant,Dominique H. Grunenwald

DOI: https://doi.org/10.1016/j.pneumo.2013.05.001

2013-10-01

Revue de Pneumologie Clinique

Abstract:

What problem does this paper attempt to address?

In-Situ Surface Reconstruction of InN Nanosheets for Efficient CO2 Electroreduction into Formate

An Zhang,Yongxiang Liang,Huiping Li,Boyan Zhang,Zuhuan Liu,Qixuan Chang,Han Zhang,Chang-Fei Zhu,Zhigang Geng,Wenguang Zhu,Jie Zeng

DOI: https://doi.org/10.1021/acs.nanolett.0c03345

IF: 10.8

2020-01-01

Nano Letters

Abstract:Probing and understanding the intrinsic active sites of electrocatalysts is crucial to unravel the underlying mechanism of CO2 electroreduction and provide a prospective for the rational design of high-performance electrocatalysts. However, their structure-activity relationships are not straightforward because electrocatalysts might reconstruct under realistic working conditions. Herein, we employ in-situ measurements to unveil the intrinsic origin of the InN nanosheets which served as an efficient electrocatalyst for CO2 reduction with a high faradaic efficiency of 95% for carbonaceous product. During the CO2 electroreduction, InN nanosheets reconstructed to form the In-rich surface. Density functional theory calculations revealed that the reconstruction of InN led to the redistribution of surface charge that significantly promoted the adsorption of HCOO* intermediates and thus benefited the formation of formate toward CO2 electroreduction. This work establishes a fundamental understanding on the mechanism associated with self-reconstruction of heterogeneous catalysts toward CO2 electroreduction.
Hydroxy‐Group‐Enriched In2O3 Facilitates CO2 Electroreduction to Formate at Large Current Densities

Zhengzheng Liu,Ximeng Lv,Junbo Zhang,Anxiang Guan,Chao Yang,Shuai Yan,Yangshen Chen,Kunhao Liu,Gengfeng Zheng

DOI: https://doi.org/10.1002/admi.202101956

IF: 5.4

2022-01-01

Advanced Materials Interfaces

Abstract:The development of catalysts and electrochemical systems for CO2 electroreduction has achieved substantial progress recently, while the long‐time operation of electrolyzing CO2 to formate with high activity and selectivity remains as a major challenge, due to the continuous carbonate precipitation at elevated pHs. Herein, hexagonal phase In2O3 (h‐In2O3) is demonstrated with a monodispersed porous nanosphere structure that can serve as an efficient electrocatalyst for converting CO2 to formate, with a peak Faradaic efficiency of 98%, high partial current densities for producing formate, and outstanding electrochemical stability, substantially exceeding cubic phase In2O3 and most of the previously reported electrocatalysts. Both experimental and theoretical studies reveal that the excellent activity and stability are attributed to the enhanced adsorption and activation of CO2 on the h‐In2O3 surface, and the rich surface hydroxyl groups further facilitate the inhibition of carbonate formation. This work suggests attractive features of the phase engineering to modulate surface hydroxyl groups for efficient and robust catalysts for CO2 electroreduction.
Rapid separation of tyrosine-specific tRNA from white lupin.

M. Barciszewska,J. Krajewski,I. Gawrońska,J. Barciszewski

Acta Biochimica Polonica

Abstract:During isolation of total ribonucleic acids from white lupin (Lupinus albus) and their subsequent separation by 10% polyacrylamide gel electrophoresis, a fast migrating RNA band is very well separated. The nucleotide sequence analysis of 76 nucleotide long sequence with many modified nucleosides was found to be identical with that of tyrosine specific tRNA of yellow lupin seeds (Lupinus luteus) and wheat germ (Triticum aestivum). Also this tRNA(Tyr) is identical with plant amber suppressor tRNA. The presented approach offers a very rapid method of purification of plant tRNA with UAG suppressor activity.
In-situ Generation of In2O3 Nanoparticles Inside In[Co(CN)6] Quasi-Metal-organic-framework Nanocubes for Efficient Electroreduction of CO2 to Formate

Jingrong Zhai,Qiaoling Kang,Qiuyue Liu,Dawei Lai,Qingyi Lu,Feng Gao

DOI: https://doi.org/10.1016/j.jcis.2021.10.096

IF: 9.9

2022-01-01

Journal of Colloid and Interface Science

Abstract:Three-dimensional (3D) network structure of metal-organic framework (MOF) can accommodate outstanding electrocatalysis performances, but always collapse during the conversion to active materials or applications process. How to maintain the 3D network when producing active species is of great importance for full application of MOF. Herein, a new MOF material, In[Co(CN)(6)] (In-Co PBA) nanocubes, are firstly synthesized. Through a controlled low-temperature deligandation process, the In-Co PBA nanocubes are transformed to a novel In2O3@In-Co PBA quasi-MOF nanocubes, which basically retain the 3D porous structure of PBA but with in situ generated In2O3 nanoparticles inside. When used as CO2RR electrocatalyst, such a novel cubic composite structure exhibits excellent performances with faradaic efficiency of 85% for formate at a potential of -0.96 V and with current density of 31.5 mA.cm(-2) at -1.32 V, surpassing most of the reported indium-based catalysts. The excellent performance can be attributed to the special composite structure, which provides not only active sites by In2O3 nanoparticles to catalyze CO2RR, but also the 3D porous framework by quasi-MOF to accelerate gaseous exchange and electrolyte permeation and prevent the electrode choking. This work offers a new strategy for the design of post-transition metal catalysts and the structure design of quasi-MOF. (C) 2021 Elsevier Inc. All rights reserved.
Unlocking the In Situ Reconstruction of Bi/Bi2O2CO3 Electrocatalyst Toward Efficiently Converting CO2 into Formate

Jiatai Yang,Xiaoyan Zhang,Shengnan Zhang,Kang Liu,Jingwen Zhao,Lixue Zhang,Shaojun Guo

DOI: https://doi.org/10.1002/adsu.202400748

IF: 6.737

2024-11-21

Advanced Sustainable Systems

Abstract:The Bi/Bi2O2CO3 electrocatalyst is developed by the combination of sulfur‐assisted disassembly and in situ reconstruction process. The enhanced surface area and the high active interface between metallic Bi and Bi2O2CO3 boost the CO2RR performance. In situ spectroscopic characterizations unveil the reconstruction process from Bi2S3/Bi2O2CO3 to Bi/Bi2O2CO3 and the generation of formate through the *OCHO route. Electrochemical reducing CO2 into formic acid has been demonstrated to be an economically viable pathway to relieve the greenhouse effect and obtain value‐added chemical feedstocks. Herein, Bi/Bi2O2CO3 is developed via the combination of sulfur‐assisted disassembly and an in situ reconstruction process. Profiting from the enlarged surface area and the generation of the high active heterointerface between metallic Bi and Bi2O2CO3, the as‐obtained Bi/Bi2O2CO3 exhibits high performance toward converting CO2 molecules into formate (HCOO−), attaining the HCOO− Faradaic efficiency (FEHCOO‐) over 97% in the current density range from 200 to 1000 mA cm−2 in both alkaline (1 m KOH) and near neutral (0.5 m KHCO3) electrolytes, along with excellent stability. In situ spectroscopic data unraveled the reconstruction process from Bi2S3/Bi2O2CO3 to Bi/Bi2O2CO3 and corroborated that the conversion of CO2 into formate is through the *OCHO intermediate, deepening the insights into the understanding of the Bi‐based electrocatalyst reconstruction and CO2RR mechanism.

materials science, multidisciplinary,green & sustainable science & technology
In-Situ Surface Reconstruction of InN Nanosheets for Efficient CO 2 Electroreduction into Formate

An Zhang,Yongxiang Liang,Huiping Li,Boyan Zhang,Zuhuan Liu,Qixuan Chang,Han Zhang,Chang-Fei Zhu,Zhigang Geng,Wenguang Zhu,Jie Zeng

DOI: https://doi.org/10.1021/acs.nanolett.0c03345

IF: 10.8

2020-10-15

Nano Letters

Abstract:Probing and understanding the intrinsic active sites of electrocatalysts is crucial to unravel the underlying mechanism of CO2 electroreduction and provide a prospective for the rational design of high-performance electrocatalysts. However, their structure–activity relationships are not straightforward because electrocatalysts might reconstruct under realistic working conditions. Herein, we employ in-situ measurements to unveil the intrinsic origin of the InN nanosheets which served as an efficient electrocatalyst for CO2 reduction with a high faradaic efficiency of 95% for carbonaceous product. During the CO2 electroreduction, InN nanosheets reconstructed to form the In-rich surface. Density functional theory calculations revealed that the reconstruction of InN led to the redistribution of surface charge that significantly promoted the adsorption of HCOO* intermediates and thus benefited the formation of formate toward CO2 electroreduction. This work establishes a fundamental understanding on the mechanism associated with self-reconstruction of heterogeneous catalysts toward CO2 electroreduction.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.nanolett.0c03345?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.nanolett.0c03345</a>.Experimental details, EDX spectrum, XPS survey spectra, configuration of the flow cell, XRD spectra of In nanosheets, 1H NMR spectrum, Faradaic efficiencies for CO and H2 product, comparison of the FEs for formate with other recently reported catalysts, six rounds of successive reaction, Nyquist plots, content of In and N elements before and after reconstruction, optimized slab, Bader charge of HCOO* intermediates adsorbed on and InN slabs, and calculated energy for different species involved in CO2 electroreduction (<a class="ext-link" href="/doi/suppl/10.1021/acs.nanolett.0c03345/suppl_file/nl0c03345_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Modulating electronic structure of amorphous indium oxide for efficient formate synthesis towards CO2 electroreduction

Yuanxiang Gao,Zhengwu Yang,Jiankang Zhao,Xiangdong Kong,Zhigang Geng

DOI: https://doi.org/10.1002/asia.202401231

2024-11-24

Chemistry - An Asian Journal

Abstract:Tuning the electronic structure of catalysts is an efficient approach to optimize the catalytic performance of CO2 electroreduction. Herein, we constructed an efficient catalyst consisted of amorphous InOX with cottonlike structure spreading on N doped carbon (N‐C) substrate to extend the catalysts‐substrate interfaces for enhancing electron‐transfer effect. The amorphous InOX growing on N‐C substrate (InOX/N‐C) exhibited an improved current density of ‐34.4 mA cm‐2. Notably, a faradaic efficiency for formate (HCOO‐) over the amorphous InOX/N‐C reached 79.6% at ‐1.0 V versus reversible hydrogen electrode, 1.8 times as high as that (44.2%) over the amorphous InOX growing on carbon black substrate. Mechanistic studies revealed that the introduction of N‐C as substrates accelerated charge‐transfer process on the catalytic surface of InOX/N‐C. Density functional theory calculations further revealed that the interactions between N‐C substrate and InOX not only facilitated the potential‐determining *HCOO protonation, but also inhabited hydrogen evolution, thus improving the catalytic performance for the production of HCOO‐.

chemistry, multidisciplinary
Modulating AgIn@In2O3 core‐shell catalysts for amplified electrochemical reduction of CO2 to formate

Guangqing Wu,Wu Chen,Yongyu Pang,Ruikuan Xie,Dong Xia,Guoliang Chai

DOI: https://doi.org/10.1002/celc.202200318

IF: 4

2022-04-28

ChemElectroChem

Abstract:Electrochemical CO2 reduction (ECO2 RR) is a promising way to convert CO2 into valuable products, while requires the assistance of highly active and selective electrocatalysts. Herein, we synthesize a series of AgIn/In2O3 catalysts with AgIn bimetallic core and In2O3 shell structure for ECO2 RR to produce formate. The AgIn bimetallic core enabled to improve the conductivity of the catalysts and the In2O3 shell was reduced to In that served as active sites during the electrochemical reduction process. The activity and selectivity of formate production is related to the indium content in the AgIn/In2O3 catalyst. The optimized Ag50In50 @In2O3 catalyst exhibited a high formate faradaic efficiency of 83% at ‐0.9 V and ‐1.0 V vs. RHE and the corresponding H2 selectivity was largely suppressed below 10% of the applied potentials. It also no significant decay in current density and faraday efficiency of formate after 12 hours of stability testing. Density functional theory calculations indicated that the adsorption energy of *OCHO intermediate on In shell was reduced due to the Ag‐In interface interaction and enhanced charge transfer compared with pure In surface, which lead to the increased selectivity of formate.

electrochemistry
In Situ Self-Assembled Active and Stable Ir@MnOx/La0.7Sr0.3Cr0.9Ir0.1O3-δ Interfaces for CO2 Electrolysis

Yuxiang Shen,Shuo Wang,Rongtan Li,Houfu Lv,Mingrun Li,Na Ta,Xiaomin Zhang,Yuefeng Song,Qiang Fu,Guoxiong Wang,Xinhe Bao

DOI: https://doi.org/10.1002/anie.202404861

2024-07-22

Abstract:Solid oxide electrolysis cells are prospective approaches for CO2 utilization but face significant challenges due to the sluggish reaction kinetics and poor stability of the fuel electrodes. Herein, we strategically addressed the long-standing trade-off phenomenon between enhanced exsolution and improved structural stability via topotactic ion exchange. The surface dynamic reconstruction of the MnOx/La0.7Sr0.3Cr0.9Ir0.1O3-δ (LSCIr) catalyst was visualized at the atomic scale. Compared with the Ir@LSCIr interface, the in situ self-assembled Ir@MnOx/LSCIr interface exhibited greater CO2 activation and easily removable carbonate intermediates, thus reached a 42 % improvement in CO2 electrolysis performance at 1.6 V. Furthermore, an improved CO2 electrolysis stability was achieved due to the uniformly wrapped MnOx shell of the Ir@MnOx/LSCIr cathode. Our approach enables a detailed understanding of the dynamic microstructure evolution at active interfaces and provides a roadmap for the rational design and evaluation of efficient metal/oxide catalysts for CO2 electrolysis.
CuO (111) Microcrystalline Evoked Indium–Organic Framework for Efficient Electroreduction of CO2 to Formate

Honghao Huang,Kaihang Yue,Chaofan Liu,Ke Zhan,Hongliang Dong,Ya Yan

DOI: https://doi.org/10.1002/smll.202400441

IF: 13.3

2024-04-11

Small

Abstract:CuO (111) microcrystalline shell evoked indium–organic framework serves as efficient catalyst for electroreduction CO2 to formate with an 89.7% Faradaic efficiency at low potential of only −0.7 V vs. RHE in a flow cell, alongside an outstanding stability of 180 h at the partial current density of 200 mA cm−2 in aqueous electrolyzer. Electrochemical reduction of carbon dioxide (CO2RR) to formate is economically beneficial but suffers from poor selectivity and high overpotential. Herein, enriched microcrystalline copper oxide is introduced on the surface of indium‐based metal–organic frameworks. Benefiting from the CuO (111) microcrystalline shell and formed catalytic active In–Cu interfaces, the obtained MIL‐68(In)/CuO heterostructure display excellent CO2RR to formate with a Faradaic efficiency (FE) as high as 89.7% at low potential of only −0.7 V vs. RHE in a flow cell. Significantly, the membrane electrode assembly (MEA) cell based on MIL‐68(In)/CuO exhibit a remarkable current density of 640.3 mA cm−2 at 3.1 V and can be stably operated for 180 h at 2.7 V with a current density of 200 mA cm−2. The ex/in situ electrochemical investigations reveal that the introduction of CuO increases the formation rate of the carbon dioxide reduction intermediate *HCOO− and inhibits the competitive hydrogen evolution reaction. This work not only provides an in‐depth study of the mechanism of the CO2RR pathways on In/Cu composite catalyst but also offers an effective strategy for the interface design of electrocatalytic carbon dioxide reduction reaction.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Interface engineering of a GaN/In2O3 heterostructure for highly efficient electrocatalytic CO2 reduction to formate

Xuan Li,Xingxing Jiang,Yan Kong,Jianju Sun,Qi Hu,Xiaoyan Chai,Hengpan Yang,Chuanxin He

DOI: https://doi.org/10.1016/s1872-2067(23)64455-9

IF: 16.5

2023-07-01

Chinese Journal of Catalysis

Abstract:Electrocatalytic CO2 reduction reaction (eCO2RR) to obtain formate is a promising method to consume CO2 and alleviate the energy crisis. Indium-based electrocatalysts have demonstrated considerable potential to produce formate. However, their unsatisfactory long-term stability and selectivity restrict their widespread application. In this study, a heterostructure of GaN- and In2O3-encapsulated porous carbon nanofibers was constructed via electrospinning and the phase transition of eutectic gallium-indium during calcination. The GaN and In2O3 nanoparticle-encapsulated porous carbon nanofibers, when used as electrocatalysts for eCO2RR, displayed high formate selectivity with a faradaic efficiency of 87% and maximum partial current density of 29.7 mA cm−2 in a 0.5 mol L−1 KHCO3 aqueous solution. The existence of the interface can cause a positive shift in the In 3d binding energy, leading to electronic redistribution. Moreover, the GaN component induced a higher proportion of O-vacancy sites in the In2O3 phase, resulting in improved selectivity for CO2-to-formate. In-situ Raman experiments and density functional theory calculations revealed that the interface between GaN and In2O3 could lower the adsorption energy of the key intermediates for formate production, thus providing superior eCO2RR performance. In addition, the framework of the porous carbon nanofibers exhibited a large electrochemically active surface area, which enabled the full exposure of the active sites. This study highlights the cooperation between GaN and In2O3 components and provides new insights into the rational design of catalysts with high CO2-to-formate conversion efficiencies.

chemistry, physical,engineering, chemical, applied
Interfacial engineering of SnO2/Bi2O2CO3 heterojunction on heteroatoms-doped carbon for high-performance CO2 electroreduction to formate

Danni Wang,Tingting Sun,Lianbin Xu,Lei Gong,Baotong Chen,Pianpian Zhang,Tianyu Zheng,Qingmei Xu,Houhe Pan,Yuexing Zhang,Jianzhuang Jiang

DOI: https://doi.org/10.1007/s12274-022-5058-z

IF: 9.9

2022-10-22

Nano Research

Abstract:Electrochemical CO2 reduction is a viable, economical, and sustainable method to transform atmospheric CO2 into carbon-based fuels and effectively reduce climate change and the energy crisis. Constructing robust catalysts through interface engineering is significant for electrocatalytic CO2 reduction (ECR) but remains a grand challenge. Herein, SnO2/Bi2O2CO3 heterojunction on N,S-codoped-carbon (SnO2/BOC@NSC) with efficient ECR performance was firstly constructed by a facile synthetic strategy. When the SnO2/BOC@NSC was utilized in ECR, it exhibits a large formic acid (HCOOH) partial current density (JHCOOH) of 86.7 mA·cm−2 at −1.2 V versus reversible hydrogen electrode (RHE) and maximum Faradaic efficiency (FE) of HCOOH (90.75% at −1.2 V versus RHE), respectively. Notably, the FEHCOOH of SnO2/BOC@NSC is higher than 90% in the flow cell and the JHCOOH of SnO2/BOC@NSC can achieve 200 mA·cm−2 at −0.8 V versus RHE to meet the requirements of industrialization level. The comparative experimental analysis and in-situ X-ray absorption fine structure reveal that the excellent ECR performance can be ascribed to the synergistic effect of SnO2/BOC heterojunction, which enhances the activation of CO2 molecules and improves electron transfer. This work provides an efficient SnO2-based heterojunction catalyst for effective formate production and offers a novel approach for the construction of new types of metal oxide heterostructures for other catalytic applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
In situ electrochemical reconstruction of Sr2Fe1.45Ir0.05Mo0.5O6-δ perovskite cathode for CO2 electrolysis in solid oxide electrolysis cells

Yuxiang Shen,Tianfu Liu,Rongtan Li,Houfu Lv,Na Ta,Xiaomin Zhang,Yuefeng Song,Qingxue Liu,Weicheng Feng,Guoxiong Wang,Xinhe Bao

DOI: https://doi.org/10.1093/nsr/nwad078

2023-03-20

Abstract:Solid oxide electrolysis cells provide a practical solution for the direct conversion of CO2 to other chemicals (i.e. CO), however, an in-depth mechanistic understanding of the dynamic reconstruction of active sites for perovskite cathodes during CO2 electrolysis remains a great challenge. Herein, we identify that iridium-doped Sr2Fe1.45Ir0.05Mo0.5O6-δ (SFIrM) perovskite displays a dynamic electrochemical reconstruction feature during CO2 electrolysis with abundant exsolution of highly dispersed IrFe alloy nanoparticles on the SFIrM surface. The in situ reconstructed IrFe@SFIrM interfaces deliver a current density of 1.46 A cm-2 while maintaining over 99% CO Faradaic efficiency, representing a 25.8% improvement compared with the Sr2Fe1.5Mo0.5O6-δ counterpart. In situ electrochemical spectroscopy measurements and density functional theory calculations suggest that the improved CO2 electrolysis activity originates from the facilitated formation of carbonate intermediates at the IrFe@SFIrM interfaces. Our work may open the possibility of using an in situ electrochemical poling method for CO2 electrolysis in practice.
In Situ Raman Study of Surface Reconstruction of FeOOH/Ni 3 S 2 Oxygen Evolution Reaction Electrocatalysts

Mengxin Chen,Yuanyuan Zhang,Ji Chen,Ran Wang,Bin Zhang,Bo Song,Ping Xu

DOI: https://doi.org/10.1002/smll.202309371

IF: 13.3

2024-01-02

Small

Abstract:Abstract Construction of heterojunctions is an effective strategy to enhanced electrocatalytic oxygen evolution reaction (OER), but the structural evolution of the active phases and synergistic mechanism still lack in‐depth understanding. Here, an FeOOH/Ni 3 S 2 heterostructure supported on nickel foam (NF) through a two‐step hydrothermal‐chemical etching method is reported. In situ Raman spectroscopy study of the surface reconstruction behaviors of FeOOH/Ni 3 S 2 /NF indicates that Ni 3 S 2 can be rapidly converted to NiOOH, accompanied by the phase transition from α ‐FeOOH to β ‐FeOOH during the OER process. Importantly, a deep analysis of Ni─O bond reveals that the phase transition of FeOOH can regulate the lattice disorder of NiOOH for improved catalytic activity. Density functional theory (DFT) calculations further confirm that NiOOH/FeOOH heterostructure possess strengthened adsorption for O‐containing intermediates, as well as lower energy barrier toward the OER. As a result, FeOOH/Ni 3 S 2 /NF exhibits promising OER activity and stability in alkaline conditions, requiring an overpotential of 268 mV @ 100 mA cm −2 and long‐term stability over 200 h at a current density of 200 mA cm −2 . This work provides a new perspective for understanding the synergistic mechanism of heterogeneous electrocatalysts during the OER process.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Interfacial engineering of In2O3/InN heterostructure with promoted charge transfer for highly efficient CO2 reduction to formate

Xiaoli Zhao,Ming Huang,Bangwei Deng,Kanglu Li,Fei Li,Fan Dong

DOI: https://doi.org/10.1016/j.cej.2022.135114

IF: 15.1

2022-06-01

Chemical Engineering Journal

Abstract:Electrocatalytic reduction of CO2 into value-added chemicals and fuels is of intensive urgence and importance to relieve the growing CO2 emission and achieve the carbon neutrality. Herein, an In2O3/InN heterojunction was constructed and firstly utilized in electrocatalytic CO2 reduction reaction (CO2RR) to formate with high Faradaic efficiency (95.7% at −1.48 V vs. RHE) and outstanding stability. The in-depth experimental analyses together with theoretical studies reveal that the O-N interaction at the interface between In2O3 and InN could provide a charge transfer channel and lead to electron enrichment on the surface of InN, promoting the activation of CO2 molecules, lowering the Gibbs free energy for the formation of *HCOO intermediate and strengthening the binding with *HCOO during CO2RR. This work provides a fundamental understanding of the interaction at In-based heterostructure interface for highly selective CO2 reduction to formate and offers a universal route for the design of other type metal oxide/nitride heterostructures for various catalytic applications.

engineering, chemical, environmental
In Situ-Activated Indium Nanoelectrocatalysts for Highly Active and Selective CO 2 Electroreduction around the Thermodynamic Potential

Lushan Ma,Ning Liu,Bingbao Mei,Kang Yang,Bingxin Liu,Kai Deng,Ying Zhang,Hao Feng,Dong Liu,Jingjing Duan,Zheng Jiang,Hui Yang,Qiang Li

DOI: https://doi.org/10.1021/acscatal.2c01434

IF: 12.9

2022-07-05

ACS Catalysis

Abstract:Developing electrocatalysts for electrochemical CO2 reduction reaction (CO2RR) with pre-eminent activity and high selectivity at low overpotentials is very significant, but it still remains a formidable challenge. Herein, we report an in situ-activated indium nanoelectrocatalyst derived from InOOH nanosheets for active and selective CO2RR at ultralow overpotentials. Such a catalyst delivers near-unity CO2RR selectivity with formate as the main product, in a wide low-overpotential window of −0.25∼−0.49 V versus reversible hydrogen electrode (vs RHE). Significantly, the CO2RR activity reaches 151 mA cm–2 at −0.45 V vs RHE, comparable to the state-of-the-art Au-based catalysts. Impressively, full-cell CO2 electrolysis implements a record-high electricity-to-fuel energy-conversion efficiency of 76.0% and solar-to-fuel energy-conversion efficiency of 20.7%. Furthermore, in situ synchrotron X-ray diffraction reveals the dynamic formation of nanosized metallic indium, correlating well with CO2RR activity, also evidenced by cyclic voltammetry. Combined with theoretical calculations, it is confirmed that the in situ-generated metallic indium plays a dominant role in promoting formate formation by accelerating the second proton-coupled electron transfer process (*OCHO+ H+ + e – → *HCOOH). Consistent with experimental results, operando Raman spectra further demonstrate that in situ-activated indium nanocatalysts can facilitate formate production even at the thermodynamic potential. This work uncovers nanosized metallic indium as the highly active site and sheds light on the design of superior indium-based catalysts for CO2 electroreduction.

chemistry, physical
In Situ-Activated Indium Nanoelectrocatalysts for Highly Active and Selective CO2 Electroreduction Around the Thermodynamic Potential

Lushan Ma,Ning Liu,Bingbao Mei,Kang Yang,Bingxin Liu,Kai Deng,Ying Zhang,Hao Feng,Dong Liu,Jingjing Duan,Zheng Jiang,Hui Yang,Qiang Li

DOI: https://doi.org/10.1021/acscatal.2c01434

IF: 12.9

2022-01-01

ACS Catalysis

Abstract:Developing electrocatalysts for electrochemical CO2 reduction reaction (CO2RR) with pre-eminent activity and high selectivity at low overpotentials is very significant, but it still remains a formidable challenge. Herein, we report an in situ-activated indium nano-electrocatalyst derived from InOOH nanosheets for active and selective CO2RR at ultralow overpotentials. Such a catalyst delivers near-unity CO2RR selectivity with formate as the main product, in a wide low-overpotential window of -0.25 similar to-0.49 V versus reversible hydrogen electrode (vs RHE). Significantly, the CO2RR activity reaches 151 mA cm(-2) at -045 V vs RHE, comparable to the state-of-the-art Au-based catalysts. Impressively, full-cell CO2 electrolysis implements a record-high electricity-to-fuel energy-conversion efficiency of 76.0% and solar-to-fuel energy-conversion efficiency of 20.7%. Furthermore, in situ synchrotron X-ray diffraction reveals the dynamic formation of nanosized metallic indium, correlating well with CO2RR activity, also evidenced by cyclic voltammetry. Combined with theoretical calculations, it is confirmed that the in situ-generated metallic indium plays a dominant role in promoting formate formation by accelerating the second proton-coupled electron transfer process (*OCHO+ H+ + e(-) ->*HCOOH). Consistent with experimental results, operando Raman spectra further demonstrate that in situ-activated indium nanocatalysts can facilitate formate production even at the thermodynamic potential. This work uncovers nanosized metallic indium as the highly active site and sheds light on the design of superior indium-based catalysts for CO2 electroreduction.
Interfacial Engineering of SnO2/Bi,O2CO1 Heterojunction on Heteroatoms-Doped Carbon for High-Performance CO2 Electroreduction to Formate

Danni Wang,Tingting Sun,Lianbin Xu,Lei Gong,Baotong Chen,Pianpian Zhang,Tianyu Zheng,Qingmei Xu,Houhe Pan,Yuexing Zhang,Jianzhuang Jiang

DOI: https://doi.org/10.1007/s12274-022-5058-z

IF: 9.9

2023-01-01

Nano Research

Abstract:Electrochemical CO2 reduction is a viable, economical, and sustainable method to transform atmospheric CO2 into carbon -based fuels and effectively reduce climate change and the energy crisis. Constructing robust catalysts through interface engineering is significant for electrocatalytic CO2 reduction (ECR) but remains a grand challenge. Herein, SnO2/Bi2O2CO3 heterojunction on N,Scodoped-carbon (SnO2/BOC@NSC) with efficient ECR performance was firstly constructed by a facile synthetic strategy. When the SnO2/BOC@NSC was utilized in ECR, it exhibits a large formic acid (HCOOH) partial current density ( J(HcooH)) of 861 mA-cm(-2) at -1.2 V versus reversible hydrogen electrode (RHE) and maximum Faradaic efficiency (FE) of HCOOH (90.75% at -1.2 V versus RHE), respectively. Notably, the FEHcooN of SnO2/BOC@NSC is higher than 90% in the flow cell and the J(HcooH) of SnO2/BOC@NSC can achieve 200 mA center dot cm(-2) at -0.8 V versus RHE to meet the requirements of industrialization level. The comparative experimental analysis and in-situ X-ray absorption fine structure reveal that the excellent ECR performance can be ascribed to the synergistic effect of SnO2/BOC heterojunction, which enhances the activation of CO2 molecules and improves electron transfer. This work provides an efficient SnO2-based heterojunction catalyst for effective formate production and offers a novel approach for the construction of new types of metal oxide heterostructures for other catalytic applications.
Molecular surface functionalization of In2O3 to tune interfacial microenvironment for enhanced catalytic performance of CO2 electroreduction

Suwen Wang,Qiang Gao,Cui Xu,Shuai Jiang,Mengyang Zhang,Xianjun Yin,Hui-Qing Peng,Bin Liu,Yu-Fei Song

DOI: https://doi.org/10.1007/s12274-023-6019-x

IF: 9.9

2023-08-09

Nano Research

Abstract:Indium-based materials (e.g., In 2 O 3 ) are a class of promising non-noble metal-based catalysts for electroreduction of carbon dioxide (CO 2 ). However, competitive hydrogen reduction reaction (HER) on indium-based catalysts hampers CO 2 reduction reaction (CO 2 RR) process. We herein tune the interfacial microenvironment of In 2 O 3 through chemical graft of alkyl phosphoric acid molecules using a facile solution-processed strategy for the first time, which is distinguished from other researches that tailor intrinsic activity of In 2 O 3 themselves. The surface functionalization of alkyl phosphoric acids over In 2 O 3 is demonstrated to remarkably boost CO 2 conversion. For example, octadecylphosphonic acid modified In 2 O 3 exhibits Faraday efficiency for H 2 ( ) of as low as 6.6% and FE HCOOH of 86.5% at −0.67 V vs. RHE, which are far superior to parent In 2 O 3 counterparts ( of 24.0% and FE HCOOH of 63.1%). Moreover, the enhancing effect of alkyl phosphoric acid functionalization is found to be closely related to the length of alkyl chains. By virtue of comprehensive experimental characterizations and molecular dynamics simulations, it is revealed that the modification of alkyl phosphoric acids significantly alters the interface microenvironment of the electrocatalyst, which changes the electrocatalyst surface from hydrophilic and aerophobic to hydrophobic and aerophilic. In this case, the water molecules are pushed away and more CO 2 molecules are trapped, increasing local CO 2 concentration at In 2 O 3 active sites, thus leading to the significantly enhanced CO 2 RR and suppressed HER. This work highlights the importance of regulating the interfacial microenvironment of inorganic catalysts by molecular surface functionalization as a means for promoting the electrochemical performance in electrosynthesis and beyond.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Surface Chemical Reconstruction of Hierarchical Hollow Inverse-Spinel Manganese Cobalt Oxide Boosting Oxygen Evolution Reaction

Chuang Fan,Xiaodong Wu,Meng Li,Xu Wang,Yu Zhu,Gengtao Fu,Tianyi Ma,Yawen Tang

DOI: https://doi.org/10.1016/j.cej.2021.133829

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Inverse-spinel manganese cobalt oxide (MnCo2O4) is an active and stable electrocatalyst towards oxygen evolution reaction (OER) in alkaline medium, but the room still remains for improving its activity owing to the limited electronic conductivity and catalytically active sites. Herein, we propose effective and novel cerium (IV) oxide (CeO2)-induced surface chemical reconstruction strategy to optimize the OER electrocatalytic performance of inverse-spinel MnCo2O4. To reach this aim, a MnCo2O4/CeO2 heterostructure is designed and synthesized through a facile and effective zeolitic imidazolate framework (ZIF)-derived method, which not only successfully implements the surface chemical reconstruction of MnCo2O4 including: (i) the charge redistribution modulating the electronic structure and (ii) the interface reconstruction creating more oxygen vacancies, but also endows MnCo2O4/CeO2 with hierarchical hollow architecture that further extends catalytically active sites. Benefiting from the surface chemical reconstruction triggered structure and composition advantages, the as-synthesized MnCo2O4/CeO2 presents the reduced overpotentials (276 mV at 10 mA cm(-2); 390 mV at 50 mA cm(-2)), improved kinetics (87 mV dec(-1)), low activation energy (E-a = 48.8 kJ mol(-1)) and robust long-term stability, which exceeds benchmark RuO2 and single MnCo2O4 catalysts. Density functional theory (DFT) calculations validate obvious changes for the electronic structure of MnCo2O4 and the increased d-band center of active Co atom after the surface chemical reconstruction, thus optimizing the binding strength of reaction intermediates during the OER. It is believed that this work gives references to the understanding and design of highly active heterojunction electrocatalysts for water oxidation.

[Flexible endoscope in thoracic surgery: CITES or cVATS?].

In-Situ Surface Reconstruction of InN Nanosheets for Efficient CO2 Electroreduction into Formate

Hydroxy‐Group‐Enriched In2O3 Facilitates CO2 Electroreduction to Formate at Large Current Densities

Rapid separation of tyrosine-specific tRNA from white lupin.

In-situ Generation of In2O3 Nanoparticles Inside In[Co(CN)6] Quasi-Metal-organic-framework Nanocubes for Efficient Electroreduction of CO2 to Formate

Unlocking the In Situ Reconstruction of Bi/Bi2O2CO3 Electrocatalyst Toward Efficiently Converting CO2 into Formate

In-Situ Surface Reconstruction of InN Nanosheets for Efficient CO 2 Electroreduction into Formate

Modulating electronic structure of amorphous indium oxide for efficient formate synthesis towards CO2 electroreduction

Modulating AgIn@In2O3 core‐shell catalysts for amplified electrochemical reduction of CO2 to formate

In Situ Self-Assembled Active and Stable Ir@MnOx/La0.7Sr0.3Cr0.9Ir0.1O3-δ Interfaces for CO2 Electrolysis

CuO (111) Microcrystalline Evoked Indium–Organic Framework for Efficient Electroreduction of CO2 to Formate

Interface engineering of a GaN/In2O3 heterostructure for highly efficient electrocatalytic CO2 reduction to formate

Interfacial engineering of SnO2/Bi2O2CO3 heterojunction on heteroatoms-doped carbon for high-performance CO2 electroreduction to formate

In situ electrochemical reconstruction of Sr2Fe1.45Ir0.05Mo0.5O6-δ perovskite cathode for CO2 electrolysis in solid oxide electrolysis cells

In Situ Raman Study of Surface Reconstruction of FeOOH/Ni 3 S 2 Oxygen Evolution Reaction Electrocatalysts

Interfacial engineering of In2O3/InN heterostructure with promoted charge transfer for highly efficient CO2 reduction to formate

In Situ-Activated Indium Nanoelectrocatalysts for Highly Active and Selective CO 2 Electroreduction around the Thermodynamic Potential

In Situ-Activated Indium Nanoelectrocatalysts for Highly Active and Selective CO2 Electroreduction Around the Thermodynamic Potential

Interfacial Engineering of SnO2/Bi,O2CO1 Heterojunction on Heteroatoms-Doped Carbon for High-Performance CO2 Electroreduction to Formate

Molecular surface functionalization of In2O3 to tune interfacial microenvironment for enhanced catalytic performance of CO2 electroreduction

Surface Chemical Reconstruction of Hierarchical Hollow Inverse-Spinel Manganese Cobalt Oxide Boosting Oxygen Evolution Reaction