An adenosine 3',5'-monophosphate-dependant protein kinase from rabbit skeletal muscle.

D. Walsh,J. Perkins,E. Krebs

DOI: https://doi.org/10.1016/s0021-9258(19)34204-8

IF: 5.485

1968-07-10

Journal of Biological Chemistry

Abstract:

What problem does this paper attempt to address?

MRI-compatible electromagnetic servomotors for image-guided robotic procedures

Lorne W. Hofstetter,Rock Hadley,Robb Merrill,Huy Pham,Gabriel C. Fine,Dennis L. Parker

DOI: https://doi.org/10.48550/arXiv.2108.12266

IF: 4.506

2021-08-16

Medical Physics

Abstract:Combining the unmatched soft-tissue imaging capabilities of magnetic resonance imaging (MRI) with high precision robotics has the potential to improve the accuracy, precision, and safety of a wide range of image-guided medical procedures. However, the goal of highly functional MRI-compatible robotic systems has not yet been realized because conventional electromagnetic servomotors used by medical robots can become dangerous projectiles near the strong magnetic field of an MRI scanner. Here we report a novel electromagnetic servomotor design that is constructed from non-magnetic components and can operate within the patient area of clinical scanners. We show that this design enables high-torque and precisely controlled rotary actuation during imaging. Using this servomotor design, an MRI-compatible robot was constructed and tested. The robot demonstrated that the linear forces required to manipulate large diameter surgical instruments in tissues could be achieved during simultaneous imaging with MRI. This work presents the first fully functional electromagnetic servomotor that can be safely operated (while imaging) in the patient area of a 3 Tesla clinical MRI scanner.
A low-cost, high-field-strength magnetic resonance imaging–compatible actuator

Riccardo Secoli,Matthew Robinson,Michele Brugnoli,Ferdinando Rodriguez y Baena

DOI: https://doi.org/10.1177/0954411915574306

2015-03-01

Abstract:To perform minimally invasive surgical interventions with the aid of robotic systems within a magnetic resonance imaging scanner offers significant advantages compared to conventional surgery. However, despite the numerous exciting potential applications of this technology, the introduction of magnetic resonance imaging–compatible robotics has been hampered by safety, reliability and cost concerns: the robots should not be attracted by the strong magnetic field of the scanner and should operate reliably in the field without causing distortion to the scan data. Development of non-conventional sensors and/or actuators is thus required to meet these strict operational and safety requirements. These demands commonly result in expensive actuators, which mean that cost effectiveness remains a major challenge for such robotic systems. This work presents a low-cost, high-field-strength magnetic resonance imaging–compatible actuator: a pneumatic stepper motor which is controllable in open loop or closed loop, along with a rotary encoder, both fully manufactured in plastic, which are shown to perform reliably via a set of in vitro trials while generating negligible artifacts when imaged within a standard clinical scanner.
State of the Art and Future Opportunities in MRI-Guided Robot-Assisted Surgery and Interventions

Hao Su,Ka-Wai Kwok,Kevin Cleary,Iulian Iordachita,M. Cenk Cavusoglu,Jaydev P. Desai,Gregory S. Fischer

DOI: https://doi.org/10.1109/jproc.2022.3169146

IF: 20.6

2022-06-24

Proceedings of the IEEE

Abstract:Magnetic resonance imaging (MRI) can provide high-quality 3-D visualization of target anatomy, surrounding tissue, and instrumentation, but there are significant challenges in harnessing it for effectively guiding interventional procedures. Challenges include the strong static magnetic field, rapidly switching magnetic field gradients, high-power radio frequency pulses, sensitivity to electrical noise, and constrained space to operate within the bore of the scanner. MRI has a number of advantages over other medical imaging modalities, including no ionizing radiation, excellent soft-tissue contrast that allows for visualization of tumors and other features that are not readily visible by other modalities, true 3-D imaging capabilities, including the ability to image arbitrary scan plane geometry or perform volumetric imaging, and capability for multimodality sensing, including diffusion, dynamic contrast, blood flow, blood oxygenation, temperature, and tracking of biomarkers. The use of robotic assistants within the MRI bore, alongside the patient during imaging, enables intraoperative MR imaging (iMRI) to guide a surgical intervention in a closed-loop fashion that can include tracking of tissue deformation and target motion, localization of instrumentation, and monitoring of therapy delivery. With the ever-expanding clinical use of MRI, MRI-compatible robotic systems have been heralded as a new approach to assist interventional procedures to allow physicians to treat patients more accurately and effectively. Deploying robotic systems inside the bore synergizes the visual capability of MRI and the manipulation capability of robotic assistance, resulting in a closed-loop surgery architecture. This article details the challenges and history of robotic systems intended to operate in an MRI environment and outlines promising clinical applications and associated state-of-the-art MRI-compatible robotic systems and technology for making this possible.

engineering, electrical & electronic
An MRI-Compatible Surgical Robot for Precise Radiological Interventions

Eckhard Hempel,Harald Fischer,Lothar Gumb,Thomas Höhn,Holger Krause,Udo Voges,Helmut Breitwieser,Bernd Gutmann,Jürgen Durke,Michael Bock,Andreas Melzer

DOI: https://doi.org/10.3109/10929080309146052

2003-01-01

Computer Aided Surgery

Abstract:OBJECTIVE: A variety of medical robots have been developed in recent years. MRI, including MR angiography and morphological imaging, with its excellent soft-tissue contrast is attractive for the development of interventional MRI-guided therapies and operations. This paper presents a telerobotic device for use in CT- and/or MR-guided radiological interventions. A robotic device for precise needle insertion during MR-guided therapy of spinal diseases will be briefly described.MATERIALS AND METHODS: Actuation of robots in an MRI environment is difficult due to the presence of strong magnetic fields. Therefore, the robot was constructed of nonmagnetic materials. The system frame was built from polyether ether ketone (PEEK) and fiber-reinforced epoxy, and actuated using ultrasonic and pneumatic motors. Completely MR-compatible sensors were developed for positioning control.RESULTS: Accuracy evaluation procedures and phantom tests were performed, with the required accuracy of approximately 1 mm being achieved and no significant artifacts being caused by the robotic device during MR image acquisition.
Mechanical Design and Evaluation of a Selectively-actuated MRI-compatible Continuum Neurosurgical Robot

Shing Shin Cheng,Xuefeng Wang,Seokhwan Jeong,Matt Kole,Steven Roys,Rao P. Gullapalli

DOI: https://doi.org/10.1109/iros51168.2021.9636128

2021-01-01

Abstract:The combination of a dexterous continuum robot and magnetic resonance imaging can potentially improve surgical precision and minimize brain manipulation in a minimally invasive neurosurgical procedure. In this work, a seven degree-of-freedom (DoF) continuum neurosurgical robot was developed. The main innovation lies in the design of a safe and robust switching mechanism and gear-based quick-connect mechanism that, respectively, allow selective actuation of the 6-DoF end effector using only three motors and highly efficient end effector exchange. Its performance has been validated in experiments involving multi-segment dexterous motion. We also evaluated the robotic system on a human cadaver head in a clinical 3-Tesla MRI. The entire workflow of robotic system set-up was implemented, confirming its clinical feasibility. The signal-to-noise ratio (SNR) drop was consistently less than 6% throughout various stages of end effector motion.
Design and Control of an Magnetic Resonance Compatible Precision Pneumatic Active Cannula Robot

David B. Comber,Eric J. Barth,Robert J. Webster

DOI: https://doi.org/10.1115/1.4024832

2013-12-06

Journal of Medical Devices

Abstract:The versatile uses and excellent soft tissue distinction afforded by magnetic resonance imaging (MRI) has led to the development of many MR-compatible devices for MRI-guided interventions. This paper presents a fully pneumatic MR-compatible robotic platform designed for neurosurgical interventions. Actuated by nonmagnetic pneumatic piston-cylinders, the robotic platform manipulates a five degree-of-freedom active cannula designed for deep brain interventions. Long lines of tubing connect the cylinders to remotely located pressure sensors and valves, and MRI-compatible optical sensors mounted on the robot provide the robot joint positions. A robust, nonlinear, model-based controller precisely translates and rotates the robot joints, with mean steady-state errors of 0.032 mm and 0.447 deg, respectively. MRI-compatibility testing in a 3-Tesla closed-bore scanner has shown that the robot has no impact on the signal-to-noise ratio, and that geometric distortion remains within recommended calibration limits for the scanner. These results demonstrate that pneumatic actuation is a promising solution for neurosurgical interventions that either require or can benefit from submillimeter precision. Additionally, this paper provides a detailed solution to the control problems imposed by severe nonlinearities in the pneumatic system, which has not previously been discussed in the context of MR-compatible devices.
Design and Characterization of MRI-compatible Plastic Ultrasonic Motor

Zhanyue Zhao,Charles Bales,Gregory Fischer

2024-09-06

Abstract:Precise surgical procedures may benefit from intra-operative image guidance using magnetic resonance imaging (MRI). However, the MRI's strong magnetic fields, fast switching gradients, and constrained space pose the need for an MR-guided robotic system to assist the surgeon. Piezoelectric actuators can be used in an MRI environment by utilizing the inverse piezoelectric effect for different application purposes. Piezoelectric ultrasonic motor (USM) is one type of MRI-compatible actuator that can actuate these robots with fast response times, compactness, and simple configuration. Although the piezoelectric motors are mostly made of nonferromagnetic material, the generation of eddy currents due to the MRI's gradient fields can lead to magnetic field distortions causing image artifacts. Motor vibrations due to interactions between the MRI's magnetic fields and those generated by the eddy currents can further degrade image quality by causing image artifacts. In this work, a plastic piezoelectric ultrasonic (USM) motor with more degree of MRI compatibility was developed and induced with preliminary optimization. Multiple parameters, namely teeth number, notch size, edge bevel or straight, and surface finish level parameters were used versus the prepressure for the experiment, and the results suggested that using 48 teeth, thin teeth notch with 0.39mm, beveled edge and a surface finish using grit number of approximate 1000 sandpaper performed a better output both in rotary speed and torque. Under this combination, the highest speed reached up to 436.6665rpm when the prepressure was low, and the highest torque reached up to 0.0348Nm when the prepressure was approximately 500g.

Robotics
MRI Robots for Needle-Based Interventions: Systems and Technology

Reza Monfaredi,Kevin Cleary,Karun Sharma

DOI: https://doi.org/10.1007/s10439-018-2075-x

IF: 3.8

2018-06-19

Annals of Biomedical Engineering

Abstract:Magnetic resonance imaging (MRI) provides high-quality soft-tissue images of anatomical structures and radiation free imaging. The research community has focused on establishing new workflows, developing new technology, and creating robotic devices to change an MRI room from a solely diagnostic room to an interventional suite, where diagnosis and intervention can both be done in the same room. Closed bore MRI scanners provide limited access for interventional procedures using intraoperative imaging. MRI robots could improve access and procedure accuracy. Different research groups have focused on different technology aspects and anatomical structures. This paper presents the results of a systematic search of MRI robots for needle-based interventions. We report the most recent advances in the field, present relevant technologies, and discuss possible future advances. This survey shows that robotic-assisted MRI-guided prostate biopsy has received the most interest from the research community to date. Multiple successful clinical experiments have been reported in recent years that show great promise. However, in general the field of MRI robotic systems is still in the early stage. The continued development of these systems, along with partnerships with commercial vendors to bring this technology to market, is encouraged to create new and improved treatment opportunities for future patients.

engineering, biomedical
MRI compatible electromagnetic actuator: magneto-thermal design and optimization

Boussad Moualek,Simon Chauviere,Lamia Belguerras,Smail Mezani,Thierry Lubin

DOI: https://doi.org/10.1108/compel-11-2023-0578

2024-04-13

COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering

Abstract:Purpose The purpose of this study is to develop a magnetic resonance imaging (MRI)-safe iron-free electrical actuator for MR-guided surgical interventions. Design/methodology/approach The paper deals with the design of an MRI compatible electrical actuator. Three-dimensional electromagnetic and thermal analytical models have been developed to design the actuator. These models have been validated through 3D finite element (FE) computations. The analytical models have been inserted in an optimization procedure that uses genetic algorithms to find the optimal parameters of the actuator. Findings The analytical models are very fast and precise compared to the FE models. The computation time is 0.1 s for the electromagnetic analytical model and 3 min for the FE one. The optimized actuator does not perturb imaging sequence even if supplied with a current 10 times higher than its rated one. Indeed, the actuator's magnetic field generated in the imaging area does not exceed 1 ppm of the B 0 field generated by the MRI scanner. The actuator can perform up to 25 biopsy cycles without any risk to the actuator or the patient since he maximum temperature rise of the actuator is about 20°C. The actuator is compact and lightweight compared to its pneumatic counterpart. Originality/value The MRI compatible actuator uses the B 0 field generated by scanner as inductor. The design procedure uses magneto-thermal coupled models that can be adapted to the design of a variety actuation systems working in MRI environment.

engineering, electrical & electronic,computer science, interdisciplinary applications,mathematics, applied
Design and Control of a Compact Series Elastic Actuator Module for Robots in MRI Scanners

Binghan He,Naichen Zhao,David Y. Guo,Charles H. Paxson,Ronald S. Fearing

2024-06-12

Abstract:In this study, we introduce a novel MRI-compatible rotary series elastic actuator module utilizing velocity-sourced ultrasonic motors for force-controlled robots operating within MRI scanners. Unlike previous MRI-compatible SEA designs, our module incorporates a transmission force sensing series elastic actuator structure, with four off-the-shelf compression springs strategically placed between the gearbox housing and the motor housing. This design features a compact size, thus expanding possibilities for a wider range of MRI robotic applications. To achieve precise torque control, we develop a controller that incorporates a disturbance observer tailored for velocity-sourced motors. This controller enhances the robustness of torque control in our actuator module, even in the presence of varying external impedance, thereby augmenting its suitability for MRI-guided medical interventions. Experimental validation demonstrates the actuator's torque control performance in both 3 Tesla MRI and non-MRI environments, achieving a settling time of 0.1 seconds and a steady-state error within 2% of its maximum output torque. Notably, our force controller exhibits consistent performance across low and high external impedance scenarios, in contrast to conventional controllers for velocity-sourced series elastic actuators, which struggle with steady-state performance under low external impedance conditions.

Robotics
An MR-Conditional High-Torque Pneumatic Stepper Motor for MRI-Guided and Robot-Assisted Intervention

Yue Chen,Ka-Wai Kwok,Zion Tsz Ho Tse

DOI: https://doi.org/10.1007/s10439-014-1049-x

IF: 3.8

2014-06-24

Annals of Biomedical Engineering

Abstract:Magnetic resonance imaging allows for visualizing detailed pathological and morphological changes of soft tissue. MR-conditional actuations have been widely investigated for development of image-guided and robot-assisted surgical devices under the Magnetic resonance imaging (MRI). This paper presents a simple design of MR-conditional stepper motor which can provide precise and high-torque actuation without adversely affecting the MR image quality. This stepper motor consists of two MR-conditional pneumatic cylinders and the corresponding supporting structures. Alternating the pressurized air can drive the motor to rotate each step in 3.6° with the motor coupled to a planetary gearbox. Experimental studies were conducted to validate its dynamics performance. Maximum 800 mN m output torque is achieved. The motor accuracy independently varied by two factors: motor operating speed and step size, was also investigated. The motor was tested within a 3T Siemens MRI scanner (MAGNETOM Skyra, Siemens Medical Solutions, Erlangen, Germany) and a 3T GE MRI scanner (GE SignaHDx, GE Healthcare, Milwaukee, WI, USA). The image artifact and the signal-to-noise ratio (SNR) were evaluated for study of its MRI compliancy. The results show that the presented pneumatic stepper motor generated 2.35% SNR reduction in MR images. No observable artifact was presented besides the motor body itself. The proposed motor test also demonstrates a standard to evaluate the pneumatic motor capability for later incorporation with motorized devices used under MRI.

engineering, biomedical
MRI-powered biomedical devices

Sierra Hovet,Hongliang Ren,Sheng Xu,Bradford Wood,Junichi Tokuda,Zion Tsz Ho Tse

DOI: https://doi.org/10.1080/13645706.2017.1402188

Abstract:Magnetic resonance imaging (MRI) is beneficial for imaging-guided procedures because it provides higher resolution images and better soft tissue contrast than computed tomography (CT), ultrasound, and X-ray. MRI can be used to streamline diagnostics and treatment because it does not require patients to be repositioned between scans of different areas of the body. It is even possible to use MRI to visualize, power, and control medical devices inside the human body to access remote locations and perform minimally invasive procedures. Therefore, MR conditional medical devices have the potential to improve a wide variety of medical procedures; this potential is explored in terms of practical considerations pertaining to clinical applications and the MRI environment. Recent advancements in this field are introduced with a review of clinically relevant research in the areas of interventional tools, endovascular microbots, and closed-loop controlled MRI robots. Challenges related to technology and clinical feasibility are discussed, including MRI based propulsion and control, navigation of medical devices through the human body, clinical adoptability, and regulatory issues. The development of MRI-powered medical devices is an emerging field, but the potential clinical impact of these devices is promising.
Intraoperative Magnetic Resonance Imaging-Conditional Robotic Devices For Therapy And Diagnosis

Taylor Fisher,Abbi Hamed,Panagiotis Vartholomeos,Ken Masamune,Guoyi Tang,Hongliang Ren,Zion T. H. Tse

DOI: https://doi.org/10.1177/0954411914524189

2014-01-01

Abstract:Magnetic resonance imaging presents high-resolution preoperative scans of target tissue and allows for the availability of intraoperative real-time images without the exposure of patients to ionizing radiation. This has motivated scientists and engineers to integrate medical robotics with the magnetic resonance imaging modality to allow robot-assisted, image-guided diagnosis and therapy. This article provides a review of the state-of-the-art medical robotic systems available for use in conjunction with intraoperative magnetic resonance imaging. The robot functionalities and mechanical designs for a wide range of magnetic resonance imaging interventions are presented, including their magnetic resonance imaging compatibility, actuation, kinematics and the mechanical and electrical designs of the robots. Classification and comparative study of various intraoperative magnetic resonance image guided robotic systems are provided. The robotic systems reviewed are summarized in a table in detail. Current technologies for magnetic resonance imaging-conditional robotics are reviewed and their potential future directions are sketched.
NCEP ATP III guidelines incorporate global risk assessment.

A. Gotto

2003-08-01

Abstract:
Open lung biopsy in patients with diffuse pulmonary infiltrates and acute respiratory failure.

David O Warner,M. Warner,M. B. Divertie

DOI: https://doi.org/10.1164/AJRCCM/137.1.90

American Review of Respiratory Disease

Abstract:Patients with diffuse pulmonary infiltrates and acute respiratory failure (ARF) potentially can benefit from diagnostic information provided by open lung biopsy (OLB). To better quantify possible benefits and risks, we reviewed an 11-yr experience with 80 such patients. Although OLB did provide a specific etiologic diagnosis in 53 patients (66%) and did influence therapy in 56 patients (70%), only 24 patients (30%) survived to hospital discharge, and 9 patients (11%) survived for 1 yr or more. Survival rates did not depend on the availability of a specific diagnosis, changes in diagnosis, or changes in therapy. Survival was improved in younger patients and patients not requiring preoperative mechanical ventilation. Fifteen patients (19%) suffered complications possibly related to OLB; the survival rate to discharge was decreased in these patients, although not significantly. We conclude that OLB provides a specific etiologic diagnosis in many patients with diffuse pulmonary infiltrates and ARF, but that its utility in these patients is limited by current shortcomings of therapy.
MRI-compatible and sensorless haptic feedback for cable-driven medical robotics to perform teleoperated needle-based interventions

Vogt, Ivan

DOI: https://doi.org/10.1007/s11548-024-03267-z

2024-09-14

International Journal of Computer Assisted Radiology and Surgery

Abstract:Surgical robotics have demonstrated their significance in assisting physicians during minimally invasive surgery. Especially, the integration of haptic and tactile feedback technologies can enhance the surgeon's performance and overall patient outcomes. However, the current state-of-the-art lacks such interaction feedback opportunities, especially in robotic-assisted interventional magnetic resonance imaging (iMRI), which is gaining importance in clinical practice, specifically for percutaneous needle punctures.

engineering, biomedical,radiology, nuclear medicine & medical imaging,surgery
A ug 2 00 4 Mass-producing spectra : The SDSS spectrographic system

P. Newman,D. Long,S. Snedden,S. Kleinman,A. Nitta,M. Harvanek,J. Krzesinski,H. Brewington,J. Barentine,E. Neilsen,D. Schlegel

Abstract:The Sloan Digital Sky Survey is the largest redshift survey conducted to date, and the principal survey observations have all been conducted on the dedicated SDSS 2.5m and 0.5m telescopes at Apache Point Observatory. While the whole survey has many unique features, this article concentrates on a description of the systems surrounding the dual fibre-input spectrographs that obtain all the survey spectra and that are capable of recording 5,760 individual spectra per night on an industrial, consistent, mass-production basis. It is hoped that the successes and lessons learned will prove instructive for future large spectrographic surveys.
Can a Tesla Turbine be Utilised as a Non-Magnetic Actuator for MRI-Guided Robotic Interventions?

David Navarro-Alarcon,Luiza Labazanova,Man Kiu Chow,Kwun Wang Ng,Derek Kwok

DOI: https://doi.org/10.48550/arXiv.2108.08495

2021-08-19

Abstract:This paper introduces a new type of nonmagnetic actuator for MRI interventions. Ultrasonic and piezoelectric motors are one the most commonly used actuators in MRI applications. However, most of these actuators are only MRI-safe, which means they cannot be operated while imaging as they cause significant visual artifacts. To cope with this issue, we developed a new pneumatic rotary servo-motor (based on the Tesla turbine) that can be effectively used during continuous MR imaging. We thoroughly tested the performance and magnetic properties of our MRI-compatible actuator with several experiments, both inside and outside an MRI scanner. The reported results confirm the feasibility to use this motor for MRI-guided robotic interventions.

Robotics,Systems and Control
Study of MRI-compatible Notched Plastic Ultrasonic Stator with FEM Simulation and Holography Validation

Zhanyue Zhao,Haimi Tang,Paulo Carvalho,Cosme Furlong,Gregory S. Fischer

2024-08-16

Abstract:Intra-operative image guidance using magnetic resonance imaging (MRI) can significantly enhance the precision of surgical procedures, such as deep brain tumor ablation. However, the powerful magnetic fields and limited space within an MRI scanner require the use of robotic devices to aid surgeons. Piezoelectric motors are commonly utilized to drive these robots, with piezoelectric ultrasonic motors being particularly notable. These motors consist of a piezoelectric ring stator that is bonded to a rotor through frictional coupling. When the stator is excited at specific frequencies, it generates distinctive mode shapes with surface waves that exhibit both in-plane and out-of-plane displacement, leading to the rotation of the rotor. In this study, we continue our previous work and refine the motor design and performance, we combine finite element modeling (FEM) with stroboscopic and time-averaged digital holography to validate a further plastic-based ultrasonic motor with better rotary performance.

Robotics
Design and Development of a Lorentz Force-Based MRI-Driven Neuroendoscope

Martin Francis Phelan III,Nihal Olcay Dogan,Jelena Lazovic,Metin Sitti

DOI: https://doi.org/10.48550/arXiv.2209.08555

2022-09-18

Abstract:The introduction of neuroendoscopy, microneurosurgery, neuronavigation, and intraoperative imaging for surgical operations has made significant improvements over other traditionally invasive surgical techniques. The integration of magnetic resonance imaging (MRI)-driven surgical devices with intraoperative imaging and endoscopy can enable further advancements in surgical treatments and outcomes. This work proposes the design and development of an MRI-driven endoscope leveraging the high (3-7 T), external magnetic field of an MR scanner for heat-mitigated steering within the ventricular system of the brain. It also demonstrates the effectiveness of a Lorentz force-based grasper for diseased tissue manipulation and ablation. Feasibility studies show the neuroendoscope can be steered precisely within the lateral ventricle to locate a tumor using both MRI and endoscopic guidance. Results also indicate grasping forces as high as 31 mN are possible and power inputs as low as 0.69 mW can cause cancerous tissue ablation. These findings enable further developments of steerable devices using MR imaging integrated with endoscopic guidance for improved outcomes.

Systems and Control,Medical Physics

An adenosine 3',5'-monophosphate-dependant protein kinase from rabbit skeletal muscle.

MRI-compatible electromagnetic servomotors for image-guided robotic procedures

A low-cost, high-field-strength magnetic resonance imaging–compatible actuator

State of the Art and Future Opportunities in MRI-Guided Robot-Assisted Surgery and Interventions

An MRI-Compatible Surgical Robot for Precise Radiological Interventions

Mechanical Design and Evaluation of a Selectively-actuated MRI-compatible Continuum Neurosurgical Robot

Design and Control of an Magnetic Resonance Compatible Precision Pneumatic Active Cannula Robot

Design and Characterization of MRI-compatible Plastic Ultrasonic Motor

MRI Robots for Needle-Based Interventions: Systems and Technology

MRI compatible electromagnetic actuator: magneto-thermal design and optimization

Design and Control of a Compact Series Elastic Actuator Module for Robots in MRI Scanners

An MR-Conditional High-Torque Pneumatic Stepper Motor for MRI-Guided and Robot-Assisted Intervention

MRI-powered biomedical devices

Intraoperative Magnetic Resonance Imaging-Conditional Robotic Devices For Therapy And Diagnosis

NCEP ATP III guidelines incorporate global risk assessment.

Open lung biopsy in patients with diffuse pulmonary infiltrates and acute respiratory failure.

MRI-compatible and sensorless haptic feedback for cable-driven medical robotics to perform teleoperated needle-based interventions

A ug 2 00 4 Mass-producing spectra : The SDSS spectrographic system

Can a Tesla Turbine be Utilised as a Non-Magnetic Actuator for MRI-Guided Robotic Interventions?

Study of MRI-compatible Notched Plastic Ultrasonic Stator with FEM Simulation and Holography Validation

Design and Development of a Lorentz Force-Based MRI-Driven Neuroendoscope