Removal of chlorine dioxide disinfection by-products by ferrous salts.

A. Katz,N. Narkis

DOI: https://doi.org/10.1016/S0043-1354(00)00250-5

IF: 12.8

Water Research

Abstract:

What problem does this paper attempt to address?

Toward Learning Model-Agnostic Explanations for Deep Learning-Based Signal Modulation Classifiers

Yunzhe Tian,Dongyue Xu,Endong Tong,Rui Sun,Kang Chen,Yike Li,Thar Baker,Wenjia Niu,Jiqiang Liu

DOI: https://doi.org/10.1109/tr.2024.3367780

IF: 5.883

2024-01-01

IEEE Transactions on Reliability

Abstract:Recent advances in deep learning (DL) have brought tremendous gains in signal modulation classification. However, DL-based classifiers lack transparency and interpretability, which raises concern about model's reliability and hinders the wide deployment in real-word applications. While explainable methods have recently emerged, little has been done to explain the DL-based signal modulation classifiers. In this work, we propose a novel model-agnostic explainer, Model-Agnostic Signal modulation classification Explainer (MASE), which provides explanations for the predictions of black-box modulation classifiers. With the subsequence-based signal interpretable representation and in-distribution local signal sampling, MASE learns a local linear surrogate model to derive a class activation vector, which assigns importance values to the timesteps of signal instance. Besides, the constellation-based explanation visualization is adopted to spotlight the important signal features relevant to model prediction. We furthermore propose the first generic quantitative explanation evaluation framework for signal modulation classification to automatically measure the faithfulness, sensitivity, robustness, and efficiency of explanations. Extensive experiments are conducted on two real-world datasets with four black-box signal modulation classifiers. The quantitative results indicate MASE outperforms two state-of-the-art methods with 44.7% improvement in faithfulness, 30.6% improvement in robustness, and 44.1% decrease in sensitivity. Through qualitative visualizations, we further demonstrate the explanations of MASE are more human interpretable and provide better understanding into the reliability of black-box model decisions.

engineering, electrical & electronic,computer science, software engineering, hardware & architecture
An Interpretable Explanation Approach for Signal Modulation Classification

Jing Bai,Yuheng Lian,Yiran Wang,Junjie Ren,Zhu Xiao,Huaji Zhou,Licheng Jiao

DOI: https://doi.org/10.1109/tim.2024.3381706

IF: 5.6

2024-04-09

IEEE Transactions on Instrumentation and Measurement

Abstract:Signal modulation classification (SMC) has attracted extensive attention for its wide application in the military and civil fields. The current direction of combining deep-learning (DL) technology with wireless communication technology is developing hotly. DL models are riding high in the field of SMC with their highly abstract feature extraction capability. However, most DL models are decision-agnostic, limiting their application to critical areas. This article proposes combining traditional feature-based (FB) methods to set appropriate manual features as interpretable representations for different modulation classification tasks. The fitted decision tree model is used as the basis for the decision of the original model on the instance to be interpreted, and the trustworthiness of the original DL model is verified by comparing the decision tree model with the prior knowledge of the signal FB modulation classification algorithm. We apply the interpretable explanation method under the current leading DL model in the field of modulation classification. The interpretation results show that the decision basis of the model under a high signal-to-noise ratio (SNR) is consistent with the expert knowledge in the traditional SMC method. The experiments show that our method is stable and can guarantee local fidelity. The decision tree as an interpretation model is intuitive and consistent with human reasoning intuition.

engineering, electrical & electronic,instruments & instrumentation
Modulation Classification of Active Attacks in Internet of Things: Lightweight MCBLDN with Spatial Transformer Network

Ruiyun Zhang,Shuo Chang,Zhiqing Wei,Yifan Zhang,Sai Huang,Zhiyong Feng

DOI: https://doi.org/10.1109/jiot.2022.3163892

IF: 10.6

2022-01-01

IEEE Internet of Things Journal

Abstract:The Internet of Things (IoT) permeates every aspect of our daily lives as billions of interconnected devices are deployed in the physical world. However, IoT networks operate in an untrusted environment and often suffer from many malicious active attacks. Automatic modulation classification (AMC), which can identify the modulation format of intercepted signals without prior knowledge, is a vital technology in countering physical-layer threats of IoT. However, most of the existing algorithms assume the channel is time invariant, and the AMC in time-varying channels is not been well studied. To deal with this dilemma, a novel AMC algorithm MCBLDN consisting of multiple convolutional neural networks (CNNs), a bidirectional long short-term memory network (BLSTM), and a deep neural network (DNN) is proposed. In MCBLDN, a multislot constellation diagram (CD) method is proposed to extract time-evolution characteristics for generating more discriminative features. Specifically, different grayscale subimages generated by slotted CDs are processed serially by their respective CNNs. Therefore, MCBLDN is overparameterized and time consuming. In addition, the frequency offset and phase offset caused by time-varying channels are neglected in MCBLDN, which is detrimental to the performance of AMC. To address the mentioned disadvantages, a lightweight MCBLDN with a spatial transformer network (SLCBDN) is proposed. First, the multiple CNNs in MCBLDN are pruned into a lightweight classification model, and the input data are rearranged to facilitate parallel processing by the lightweight CNN. Additionally, the spatial transformer network (STN) is utilized to reduce the influence of frequency offset and phase offset. Numerical results verify that the proposed method achieves superior performance and higher speed compared to the baseline algorithm MCBLDN.

computer science, information systems,telecommunications,engineering, electrical & electronic
A few-shot learning-based automatic modulation classification method for Internet of Things

Aer Sileng,Qi Chenhao

DOI: https://doi.org/10.23919/jcc.fa.2024-0034.202408

2024-09-10

China Communications

Abstract:Due to the limited computational capability and the diversity of the Internet of Things devices working in different environment, we consider few-shot learning-based automatic modulation classification (AMC) to improve its reliability. A data enhancement module (DEM) is designed by a convolutional layer to supplement frequency-domain information as well as providing nonlinear mapping that is beneficial for AMC. Multimodal network is designed to have multiple residual blocks, where each residual block has multiple convolutional kernels of different sizes for diverse feature extraction. Moreover, a deep supervised loss function is designed to supervise all parts of the network including the hidden layers and the DEM. Since different model may output different results, cooperative classifier is designed to avoid the randomness of single model and improve the reliability. Simulation results show that this few-shot learning-based AMC method can significantly improve the AMC accuracy compared to the existing methods.

telecommunications
An Ensemble Deep Learning Model for Automatic Modulation Classification in 5G and Beyond IoT Networks

Chirag Roy,Satyendra Singh Yadav,Vipin Pal,Mangal Singh,Sarat Kumar Patra,G R Sinha

DOI: https://doi.org/10.1155/2021/5047355

2021-12-14

Abstract:With rapid advancement in artificial intelligence (AI) and machine learning (ML), automatic modulation classification (AMC) using deep learning (DL) techniques has become very popular. This is even more relevant for Internet of things (IoT)-assisted wireless systems. This paper presents a lightweight, ensemble model with convolution, long short term memory (LSTM), and gated recurrent unit (GRU) layers. The proposed model is termed as deep recurrent convoluted network with additional gated layer (DRCaG). It has been tested on a dataset derived from the RadioML2016(b) and comprises of 8 different modulation types named as BPSK, QPSK, 8-PSK, 16-QAM, 4-PAM, CPFSK, GFSK, and WBFM. The performance of the proposed model has been presented through extensive simulation in terms of training loss, accuracy, and confusion matrix with variable signal to noise ratio (SNR) ranging from -20 dB to +20 dB and it demonstrates the superiority of DRCaG vis-a-vis existing ones.
Identification of Active Attacks in Internet of Things: Joint Model- and Data-Driven Automatic Modulation Classification Approach.

Sai Huang,Chunsheng Lin,Wenjun Xu,Yue Gao,Zhiyong Feng,Fusheng Zhu

DOI: https://doi.org/10.1109/jiot.2020.3016125

IF: 10.6

2020-01-01

IEEE Internet of Things Journal

Abstract:The Internet of Things (IoT) pervades every aspect of our daily lives and industrial productions since billions of interconnected devices are deployed everywhere of the globe. However, the seamless IoT unveils a number of physical-layer threats, such as jamming and spoofing that decrease the communication performance and the reliability of the IoT systems. As the process of identifying the modulation format of signals corrupted by noise and fading, automatic modulation classification (AMC) plays a vital role in physical-layer security as it can detect and identify the pilot jamming, deceptive jamming, and sybil attacks. In this article, we propose a novel cyclic correntropy vector (CCV)-based AMC method using long short-term memory densely connected network (LSMD). Specifically, cyclic correntropy model-driven feature CCV is first extracted using the received signals as it contains both the second-order and the higher order characteristics of cyclostationary. Then, the extracted CCV feature is put into the data-driven LSMD which mainly consists of long short-term memory (LSTM) network and dense network (DenseNet). Moreover, an additive cosine loss is utilized to train the LSMD for maximizing the interclass feature differences and minimizing the intraclass feature variations. Simulations demonstrate that the proposed CCV-LSMD method yields superior performance than other recent schemes.
Automatic Modulation Classification Using Gated Recurrent Residual Network

Sai Huang,Rui Dai,Juanjuan Huang,Yuanyuan Yao,Yue Gao,Fan Ning,Zhiyong Feng

DOI: https://doi.org/10.1109/jiot.2020.2991052

IF: 10.6

2020-01-01

IEEE Internet of Things Journal

Abstract:The development of the Internet-of-Things (IoT) security is comparatively slower than the pace of the IoT innovations. The seamless IoT network operates in an untrusted environment and is exposed to many malicious active attacks. As the process of identifying the modulation format of signals is corrupted by noise and fading, automatic modulation classification (AMC) can be viewed as an effective approach to counter physical-layer threats for IoT as it can detect and identify the pilot jamming, deceptive jamming, and Sybil attacks. Nowadays, data-driven deep learning (DL) techniques, which are capable of extracting discriminative features and perform better robustness to channel and noise conditions, have drawn widespread attention. The deep residual network (ResNet) has a strong representative ability, which can learn latent information repeatedly from the received signals and improve the classification accuracy. Meanwhile, the gated recurrent unit (GRU), which is capable of exploiting temporal information of the received signal can expand the dimension of the signal features for satisfactory classification performance. Considering the advantages of the above networks, this article proposes a novel gated recurrent residual neural network (GrrNet) for feature-based AMC, where the amplitude and phase of the received signal are utilized as the inputs of GrrNet. In GrrNet, a ResNet extractor module is first designed to extract the highly representative features and then temporal information is obtained by the subsequent GRU module which is capable of processing the representative features with the arbitrary length for modulation classification. Moreover, extensive simulations are conducted to verify the classification performance and robustness of the proposed GrrNet and it is shown that GrrNet outperforms other recent DL-based AMC methods. Moreover, the influence of the network parameters, symbol length, and frequency offset on performance is also explored.
Visualizing Deep Learning-Based Radio Modulation Classifier

Liang Huang,You Zhang,Weijian Pan,Jinyin Chen,Li Ping Qian,Yuan Wu

DOI: https://doi.org/10.1109/tccn.2020.3048113

IF: 6.359

2021-03-01

IEEE Transactions on Cognitive Communications and Networking

Abstract:Deep learning has recently been successfully applied in automatic modulation classification by extracting and classifying radio features in an end-to-end way. However, deep learning-based radio modulation classifiers are lacking interpretability, and there is little explanation or visibility into what kinds of radio features are extracted and chosen for classification. In this article, we visualize different deep learning-based radio modulation classifiers by introducing a class activation vector. Specifically, both convolutional neural networks (CNN) based classifier and long short-term memory (LSTM) based classifier are separately studied, and their extracted radio features are visualized. We explore different hyperparameter settings via extensive numerical evaluations and show both the CNN-based classifier and LSTM-based classifiers extract similar radio features relating to modulation reference points. In particular, for the LSTM-based classifier, its obtained radio features are similar to the knowledge of human experts. Our numerical results indicate the radio features extracted by deep learning-based classifiers greatly depend on the contents carried by radio signals, and a short radio sample may lead to misclassification.

telecommunications
A IQ Correlation and Long-term Features Neural Network Classifier for Automatic Modulation Classification

Cui TianShu,Huang Zhen,Wang Dong,Li Ruike

DOI: https://doi.org/10.1109/icicn56848.2022.10006621

2022-01-01

Abstract:Automatic modulation classification is the process of determining the modulation scheme of an intercepted signal with no a prior information. Its main advantage is that no communication overhead needs to be allocated for control information to inform the receiver about changes in a transmitted signal's modulation scheme. Recently, deep learning has been applied to automatic modulation classification tasks, but most deep learning classifiers have the difficulty balancing weight and efficiency. According to the characteristics of in-phase (I) and quadrature (Q) signals, a IQ correlation and long-term temporal features neural network classifier is proposed. It first extracts IQ correlation features and short-term temporal features by different directional convolutional filters, and then extracts long-term temporal features by the Long Short-Term Memory unit, and finally uses only one full connected layer for classification. Experiment results in the standard dataset RML2016.10a show that our proposed is more efficient and lightweight compared with the state-of-the-art deep learning classifiers.
Identifying Physical-Layer Attacks for IoT Security: an Automatic Modulation Classification Approach Using Multi-Module Fusion Neural Network.

Sai Huang,Chunsheng Lin,Kai Zhou,Yuanyuan Yao,Hua Lu,Fusheng Zhu

DOI: https://doi.org/10.1016/j.phycom.2020.101180

IF: 2.379

2020-01-01

Physical Communication

Abstract:The Internet of Things (IoT) is increasingly flourishing with establishing ubiquitous connections in every aspect of our daily lives and industrial production. However, the active physical-layer threats such as spoofing and jamming largely degrades the communication performance and makes the IoT network messy. Automatic modulation classification (AMC), which identifies the modulation formats of the active attack, plays a vital role in physical-layer security of IoT. In this paper, a multi-module fusion neural network (MMFN) is proposed to identify the signal modulations using a novel feature named pixel-coloring constellation images (PCCs). Specifically, a pixel-coloring constellation projection algorithm (PCCP) is proposed to convert raw modulated signals into PCCs, which are the inputs of the following MMFN. The MMFN is proposed to extract discriminative features and make the final classification decisions. In MMFN, multi-module fusion strategy is adopted to possess a strong representation ability and the characterization module is designed to balance the tradeoff between the number of parameters and the dimensions of extracted representative features. Simulation results exhibit that the proposed MMFN scheme achieves 90% classification accuracy at 1 dB signal to noise ratio (SNR) when the symbol length is set as 2048, and it outperforms the recent deep learning based AMC methods, which demonstrates its superior classification performance.
Deep multilevel architecture for automatic modulation classification

Ashok Parmar,Ankit Chouhan,Kamal Captain,Jignesh Patel

DOI: https://doi.org/10.1016/j.phycom.2024.102361

IF: 2.379

2024-04-18

Physical Communication

Abstract:In the realm of wireless communication, deep learning has exhibited promising outcomes across various tasks, including automatic modulation classification (AMC), channel estimation, and signal detection, yielding substantial enhancements in performance and efficiency. AMC plays a pivotal role in identifying the modulation scheme of a received signal without prior knowledge of the transmitter. However, existing AMC techniques attempt to classify both analog and digital modulations together, disregarding their distinct characteristics. In this work, we propose a multilevel approach for AMC, wherein the received signals are first classified into their parent class, i.e., analog or digital modulation, and subsequently further classified into their respective modulation type. For implementing multilevel approach, we propose three distinct deep learning models: analog digital modulation classifier (AD-MC), analog modulation classifier (An-MC), and digital modulation classifier (Dig-MC). Performance analysis is conducted for the individual models as well as for the multilevel model that integrates all three models. The multilevel model demonstrates accurate signal classification at Signal-to-Noise Ratios (SNRs) of 0 dB or higher, achieving a remarkable classification accuracy of over 90%. Furthermore, the proposed multilevel model surpasses state-of-the-art AMC methods in accuracy while maintaining lower complexity.

telecommunications,engineering, electrical & electronic
Automatic Modulation Classification for low-power IoT applications

Yasmin R. Mondino-Llermanos,Graciela Corral-Briones

DOI: https://doi.org/10.1109/tla.2024.10431424

IF: 0.967

2024-02-13

IEEE Latin America Transactions

Abstract:The Internet of Things (IoT) has swiftly become one of the most important technologies in recent years. Radio spectrum access represents a stern challenge for the IoT as a consequence of the increased use of connected devices. This is particularly true for IoT devices operating in the unlicensed band where the huge demand for wireless connectivity will require techniques that use the spectrum efficiently. Avoiding training sequences enables a more efficient spectrum usage and has the additional advantage of reducing the power consumption of IoT devices, but it requires modulation identification mechanisms. This paper presents a simple yet efficient method to classify received signals according to their modulation type. We propose the application of a single hidden layer neural network with a small number of trainable parameters for performing the classification between seven different modulation types. The designed classifier achieves a maximum accuracy of 95% when the signal-to-noise ratio (SNR) of the input data is 12 dB, and in the presence of multi-path fading, sample rate offset and carrier frequency offset.

engineering, electrical & electronic,computer science, information systems
Accuracy Analysis of Feature-Based Automatic Modulation Classification via Deep Neural Network

Zhan Ge,Hongyu Jiang,Youwei Guo,Jie Zhou

DOI: https://doi.org/10.3390/s21248252

IF: 3.9

2021-12-10

Sensors

Abstract:A feature-based automatic modulation classification (FB-AMC) algorithm has been widely investigated because of its better performance and lower complexity. In this study, a deep learning model was designed to analyze the classification performance of FB-AMC among the most commonly used features, including higher-order cumulants (HOC), features-based fuzzy c-means clustering (FCM), grid-like constellation diagram (GCD), cumulative distribution function (CDF), and raw IQ data. A novel end-to-end modulation classifier based on deep learning, named CCT classifier, which can automatically identify unknown modulation schemes from extracted features using a general architecture, was proposed. Features except GCD are first converted into two-dimensional representations. Then, each feature is fed into the CCT classifier for modulation classification. In addition, Gaussian channel, phase offset, frequency offset, non-Gaussian channel, and flat-fading channel are also introduced to compare the performance of different features. Additionally, transfer learning is introduced to reduce training time. Experimental results showed that the features HOC, raw IQ data, and GCD obtained better classification performance than CDF and FCM under Gaussian channel, while CDF and FCM were less sensitive to the given phase offset and frequency offset. Moreover, CDF was an effective feature for AMC under non-Gaussian and flat-fading channels, and the raw IQ data can be applied to different channels’ conditions. Finally, it showed that compared with the existing CNN and K-S classifiers, the proposed CCT classifier significantly improved the classification performance for MQAM at N = 512, reaching about 3.2% and 2.1% under Gaussian channel, respectively.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Time and phase features network model for automatic modulation classification

Tianshu Cui,Dong Wang,Libin Ji,Jiabao Han,Zhen Huang

DOI: https://doi.org/10.1016/j.compeleceng.2023.108948

2023-09-08

Abstract:Automatic Modulation Classification (AMC) constitutes a fundamental technology for enabling automatic demodulation in Cognitive Communication Systems (CCS). Due to the size, weight, and power (SWaP) constraints of embedded computers employed in CCS, there are limited computational and memory resources. While deep neural networks possess strong feature representation and high accuracy recognition capabilities, they usually come with a high number of network parameters and high computational complexity, thereby reducing the real-time processing ability of CCS. Therefore, neural network structures intended for CCS must be lightweight and computationally efficient. In this paper, we propose a high-performance and resource-friendly network model based on an analysis of the modulation mechanism of communication signals. The network extracts phase features and short-time features sequentially using directional convolutional filters. Long short-term memory (LSTM) units are then used to extract long-term features, and only one fully connected layer is used for classification. Experiments with a standard dataset consisting of 11 communication modulation types demonstrate that our proposed model achieves an accuracy greater than 84.5%, even when the signal-to-noise ratio (SNR) is 0 dB, and the model has only 29187 parameters. On a Jetson Nano embedded platform, the model achieves a processing speed of up to 375366 in-phase and quadrature samples/s. Overall, the results suggest that our proposed approach is both lightweight and highly efficient, making it more suitable for CCS applications.

engineering, electrical & electronic,computer science, interdisciplinary applications, hardware & architecture
Modulation Classification Through Deep Learning Using Resolution Transformed Spectrograms

Muhammad Waqas,Muhammad Ashraf,Muhammad Zakwan

2023-06-07

Abstract:Modulation classification is an essential step of signal processing and has been regularly applied in the field of tele-communication. Since variations of frequency with respect to time remains a vital distinction among radio signals having different modulation formats, these variations can be used for feature extraction by converting 1-D radio signals into frequency domain. In this paper, we propose a scheme for Automatic Modulation Classification (AMC) using modern architectures of Convolutional Neural Networks (CNN), through generating spectrum images of eleven different modulation types. Additionally, we perform resolution transformation of spectrograms that results up to 99.61% of computational load reduction and 8x faster conversion from the received I/Q data. This proposed AMC is implemented on CPU and GPU, to recognize digital as well as analogue signal modulation schemes on signals. The performance is evaluated on existing CNN models including SqueezeNet, Resnet-50, InceptionResnet-V2, Inception-V3, VGG-16 and Densenet-201. Best results of 91.2% are achieved in presence of AWGN and other noise impairments in the signals, stating that the transformed spectrogram-based AMC has good classification accuracy as the spectral features are highly discriminant, and CNN based models have capability to extract these high-dimensional features. The spectrograms were created under different SNRs ranging from 5 to 30db with a step size of 5db to observe the experimental results at various SNR levels. The proposed methodology is efficient to be applied in wireless communication networks for real-time applications.

Signal Processing,Machine Learning,Sound,Audio and Speech Processing
A Semantic-Consistent Few-Shot Modulation Recognition Framework for IoT Applications

Jie Su,Peng Sun,Yuting Jiang,Zhenyu Wen,Fangda Guo,Yiming Wu,Zhen Hong,Haoran Duan,Yawen Huang,Rajiv Ranjan,Yefeng Zheng

DOI: https://doi.org/10.1109/TNNLS.2024.3441597

2024-08-23

Abstract:The rapid growth of the Internet of Things (IoT) has led to the widespread adoption of the IoT networks in numerous digital applications. To counter physical threats in these systems, automatic modulation classification (AMC) has emerged as an effective approach for identifying the modulation format of signals in noisy environments. However, identifying those threats can be particularly challenging due to the scarcity of labeled data, which is a common issue in various IoT applications, such as anomaly detection for unmanned aerial vehicles (UAVs) and intrusion detection in the IoT networks. Few-shot learning (FSL) offers a promising solution by enabling models to grasp the concepts of new classes using only a limited number of labeled samples. However, prevalent FSL techniques are primarily tailored for tasks in the computer vision domain and are not suitable for the wireless signal domain. Instead of designing a new FSL model, this work suggests a novel approach that enhances wireless signals to be more efficiently processed by the existing state-of-the-art (SOTA) FSL models. We present the semantic-consistent signal pretransformation (ScSP), a parameterized transformation architecture that ensures signals with identical semantics exhibit similar representations. ScSP is designed to integrate seamlessly with various SOTA FSL models for signal modulation recognition and supports commonly used deep learning backbones. Our evaluation indicates that ScSP boosts the performance of numerous SOTA FSL models, while preserving flexibility.
An efficient automatic modulation recognition using time–frequency information based on hybrid deep learning and bagging approach

Zahraa Hazim Obaid,Behzad Mirzaei,Ali Darroudi

DOI: https://doi.org/10.1007/s10115-023-02041-y

IF: 2.7

2024-01-10

Knowledge and Information Systems

Abstract:Determining the type of modulation is an important task in military communications, satellite communications systems, and submarine communications. In this study, a new digital modulation classification model is presented for detecting various types of modulated signals. The continuous wavelet transform is used in the first step to create a visual representation of the spectral density of the frequencies of the modulation signals in a scalogram image. The subsequent stage involves the utilization of a deep convolutional neural network for feature extraction from the scalogram images. In the next step, the best features are chosen using the MRMR algorithm. MRMR algorithm increases the classification speed and the ability of interpret the classification model by reducing the dimensions of the features. In the fourth step, the modulations are classified using the group learning technique. In the simulations, modulated signals with different amounts of noise with SNR from 0 to 25 dB are considered. Then, accuracy, precision, recall, and F1-score are used to evaluate the performance of the proposed method. The results of the simulations prove that the proposed model with achieving above 99.9% accuracy performs well in the presence of different amounts of noise and provides better performance than other previous studies.

computer science, information systems, artificial intelligence
Achieving Efficient Feature Representation for Modulation Signal: A Cooperative Contrast Learning Approach

Jing Bai,Xu Wang,Zhu Xiao,Huaji Zhou,Talal Ahmed Ali Ali,You Li,Licheng Jiao

DOI: https://doi.org/10.1109/jiot.2024.3350927

IF: 10.6

2024-01-01

IEEE Internet of Things Journal

Abstract:Seamless Internet of Things (IoT) connections expose many vulnerabilities in wireless networks, and IoT devices inevitably face many malicious active attacks. Automatic modulation recognition (AMR) is an effective way to combat IoT physical layer threats. In the field of non-collaborative communication, feature representation learning for unlabeled signals is an important task of AMR. However, due to the unavailability of a priori knowledge and the influence of interference during signal transmission, the intercepted unlabeled signals are difficult to perform efficient feature representation. In this paper, we propose cooperative contrast learning for unlabeled modulation signal (CoCL-Sig). Specifically, the CoCL-Sig is trained using both sequence and constellation diagram modalities, and is divided into two parts: modal-level feature representation and instance-level auxiliary feature representation. In modal-level feature representation, two modal projections are matched in the same hyperplane space. To ensure the stability of the feature representation, a sequence auxiliary branch is added to form an instance-level feature representation of the sequence. In addition, the feature representations obtained by the CoCL-Sig can be applied to modulation signals for semi-supervised classification and clustering tasks. We have conducted extensive experiments on two widely-used modulation signal datasets, RML2016.10A and RML2016.04C. The results demonstrate the effectiveness of our method in modulation signal feature representation and its superiority compared to other methods.

computer science, information systems,telecommunications,engineering, electrical & electronic
MAMCA -- Optimal on Accuracy and Efficiency for Automatic Modulation Classification with Extended Signal Length

Yezhuo Zhang,Zinan Zhou,Yichao Cao,Guangyu Li,Xuanpeng Li

2024-05-18

Abstract:With the rapid growth of the Internet of Things ecosystem, Automatic Modulation Classification (AMC) has become increasingly paramount. However, extended signal lengths offer a bounty of information, yet impede the model's adaptability, introduce more noise interference, extend the training and inference time, and increase storage overhead. To bridge the gap between these requisites, we propose a novel AMC framework, designated as the Mamba-based Automatic Modulation ClassificAtion (MAMCA). Our method adeptly addresses the accuracy and efficiency requirements for long-sequence AMC. Specifically, we introduce the Selective State Space Model as the backbone, enhancing the model efficiency by reducing the dimensions of the state matrices and diminishing the frequency of information exchange across GPU memories. We design a denoising-capable unit to elevate the network's performance under low signal-to-noise radio. Rigorous experimental evaluations on the publicly available dataset RML2016.10, along with our synthetic dataset within multiple quadrature amplitude modulations and lengths, affirm that MAMCA delivers superior recognition accuracy while necessitating minimal computational time and memory occupancy. Codes are available on

Signal Processing
Automatic Modulation Classification: A Deep Architecture Survey

Thien Huynh-The,Rukhsana Ruby,Viet Quoc Pham,Toan-Van Nguyen,Thanh Thi Nguyen,M. Zeng,Dong-Seong Kim

DOI: https://doi.org/10.1109/ACCESS.2021.3120419

IF: 3.9

IEEE Access

Abstract:Automatic modulation classification (AMC), which aims to blindly identify the modulation type of an incoming signal at the receiver in wireless communication systems, is a fundamental signal processing technique in the physical layer to improve the spectrum utilization efficiency. Motivated by deep learning (DL) high-impact success in many informatics domains, including radio signal processing for communications, numerous recent AMC methods exploiting deep networks have been proposed to overcome the existing drawbacks of traditional approaches. DL is capable of learning the underlying characteristics of radio signals effectively for modulation pattern recognition, which in turn improves the modulation classification performance under the presence of channel impairments. In this work, we first provide the fundamental concepts of various architectures, such as neural networks, recurrent neural networks, long short-term memory, and convolutional neural networks as the necessary background. We then convey a comprehensive study of DL for AMC in wireless communications, where technical analysis is deliberated in the perspective of state-of-the-art deep architectures. Remarkably, several sophisticated structures and advanced designs of convolutional neural networks are investigated for different data types of sequential radio signals, spectrum images, and constellation images to deal with various channel impairments. Finally, we discuss some primary research challenges and potential future directions in the area of DL for modulation classification.

Computer Science,Engineering

Removal of chlorine dioxide disinfection by-products by ferrous salts.

Toward Learning Model-Agnostic Explanations for Deep Learning-Based Signal Modulation Classifiers

An Interpretable Explanation Approach for Signal Modulation Classification

Modulation Classification of Active Attacks in Internet of Things: Lightweight MCBLDN with Spatial Transformer Network

A few-shot learning-based automatic modulation classification method for Internet of Things

An Ensemble Deep Learning Model for Automatic Modulation Classification in 5G and Beyond IoT Networks

Identification of Active Attacks in Internet of Things: Joint Model- and Data-Driven Automatic Modulation Classification Approach.

Automatic Modulation Classification Using Gated Recurrent Residual Network

Visualizing Deep Learning-Based Radio Modulation Classifier

A IQ Correlation and Long-term Features Neural Network Classifier for Automatic Modulation Classification

Identifying Physical-Layer Attacks for IoT Security: an Automatic Modulation Classification Approach Using Multi-Module Fusion Neural Network.

Deep multilevel architecture for automatic modulation classification

Automatic Modulation Classification for low-power IoT applications

Accuracy Analysis of Feature-Based Automatic Modulation Classification via Deep Neural Network

Time and phase features network model for automatic modulation classification

Modulation Classification Through Deep Learning Using Resolution Transformed Spectrograms

A Semantic-Consistent Few-Shot Modulation Recognition Framework for IoT Applications

An efficient automatic modulation recognition using time–frequency information based on hybrid deep learning and bagging approach

Achieving Efficient Feature Representation for Modulation Signal: A Cooperative Contrast Learning Approach

MAMCA -- Optimal on Accuracy and Efficiency for Automatic Modulation Classification with Extended Signal Length

Automatic Modulation Classification: A Deep Architecture Survey