Abstract:Ultrahigh field systems (≥ 7 T) can increase the signal-to-noise ratio of magnetic resonance imaging (MRI), improving imaging performance compared to systems with lower fields. However, these enhancements heavily rely on a high B0 magnetic field homogeneity level, which can be achieved through superconducting shimming. This paper presents a novel two-stage superconducting shimming method designed to achieve precise shimming for a 7 T MRI superconducting magnet. In the initial stage, detailed measurements and fittings were conducted to determine the current polarity and the axial or circumferential positions of the shim fields. Subsequently, an optimization strategy was implemented to determine the optimal shim currents with a flexible target field. The second stage involves an iterative process to fine-tune the current of a specific shim coil, identified as having the most significant impact on field homogeneity. The overall fitness of 99.5% underscores the precision in determining the current polarity and position of the shim fields. Significantly, the calibrated shim system substantially improves the peak-to-peak and Root Mean Square Error (RMSE) field homogeneities from 107.42 ppm and 37.00 ppm to 11.12 ppm and 3.26 ppm, respectively, representing improvements of 89.65% and 91.19%. Furthermore, the simulation results of the fine-tuning stage demonstrate additional enhancements in peak-to-peak field homogeneity, to 9.9 ppm by reducing the current of the Z2 shim coil by 51.3 mA. Additionally, the shimmed magnetic field exhibited high time stability, with a maximum variation of only 27 µT observed within 48 h. Thus, the proposed two-stage superconducting shimming framework effectively addresses the challenge of imperfect B0 magnetic fields, enhancing peak-to-peak and RMSE field homogeneity. The stepwise optimized approach also mitigates deviations caused by shim-to-shim coupling, demonstrating its efficacy in achieving precise shimming in ultrahigh-field MRI systems.

A hybrid, nonlinear programming approach for optimizing passive shimming in MRI

A Hybrid Field-Harmonics Approach for Passive Shimming Design in Mri

Passive Shimming of A Superconducting Magnet Using the L-1-Norm Regularized Least Square Algorithm

Design of Shimming Rings for Small Permanent MRI Magnet Using Sensitivity-Analysis-Based Particle Swarm Optimization Algorithm

A Novel Passive Shimming Method for the Correction of Magnetic Fields above the Patient Bed in MRI.

The Optimal Target Magnetic Field Method for Passive Shimming in MRI

Simulation and Optimization of a Permanent Magnet for Small-sized MRI by Genetic Algorithm

Optimization and D esign of M ulti-ring

Improved Halbach Magnets by Particle Swarm Optimization for Mobile Nuclear Magnetic Resonance Systems.

A Novel Design Method of Passive Shimming for 0.7-T Biplanar Superconducting MRI Magnet

Optimization and Design of Multi-ring Pole Pieces for Small-sized Permanent Magnetic Resonance Imaging Magnet

A SQP Optimization Method for Shimming a Permanent MRI Magnet

3-D Optimal Shape Design of Pole Piece in Permanent Magnet Mri Using Parameterized Nonlinear Design Sensitivity Analysis

Optimal Design of Completely Open Magnet for MRI

A Structure Design Method for Reduction of MRI Acoustic Noise.

On the passive shimming of a 7 T whole‐body MRI superconducting magnet: Implementation with minimized ferromagnetic materials usage and operable magnetic force control

Passive Shimming of a 3T Cryogen-Free Animal Magnetic Resonance Imaging Superconducting Magnet with Dense Shim Tray Slots and Small Residual Magnetic Force

Electromagnetic Design of MRI Superconducting Magnet Based on Novel Hybrid Optimization Methods

The Optimal Design of Passive Shimming Elements for High Homogeneous Permanent Magnets Utilizing Sensitivity Analysis

Shimming Method for Permanent Magnet of Open-Type Low-Field MRI

Implementing a Two-Stage, Shim Field-Calibrated Superconducting Shimming Method on a 7t Cryogen-Free Small Animal MRI Magnet