Probabilities of dying from cancer and other causes in French cancer patients based on an unbiased estimator of net survival: a study of five common cancers.

H. Charvat,N. Bossard,L. Daubisse,F. Binder,A. Belot,L. Remontet

DOI: https://doi.org/10.1016/j.canep.2013.08.006

IF: 2.89

2013-12-01

Cancer Epidemiology

Abstract:

What problem does this paper attempt to address?

Facile synthesis and versatile topological transformation of mono-cleavable symmetric starlike terpolymers.

Xiao Jiang,Meijing Zhang,Shixian Li,Wei Shao,Youliang Zhao

DOI: https://doi.org/10.1039/c2cc35275c

IF: 4.9

2012-09-10

Chemical Communications

Abstract:A straightforward strategy involving a RAFT process and ring-opening polymerization was used to construct symmetric reduction-responsive amphiphilic A(2m)B(2n)C(2) (m≈n≈ 3) starlike terpolymers with precise microstructure, which could be efficiently converted into thiol-functionalized telechelic stars, degraded A(m)B(n)C miktoarm stars and comblike-linear multiblock copolymers via postmodification.
The application of QLF technology in caries diagnosis

JIN Fang,LIN Bin,CAO Xiangqun

DOI: https://doi.org/10.3969/j.issn.1005-5630.2008.02.011

2008-01-01

Abstract:Comparing with the traditional caries diagnosis,quantitative light-induced fluorescence(QLF) technology is a new developing one which can measure small changes in the mineral content of enamel lesions quantitatively and allow longitudinal monitoring of changes in lesion area and depth.The summary concerns some traditional dental diagnostic methods especially QLF technology,involving its principles,system structure,detection factors,and so on.
Validity assessment of a third-generation light-induced fluorescence device in detecting proximal and occlusal caries lesions: A cross-sectional study

Ahmad Bittar,Tuba Çetin,Gizem Meva Başyiğit,Burcu Gözetici-Çil

DOI: https://doi.org/10.1016/j.pdpdt.2024.104368

2024-10-12

Abstract:Objectives: The objective of this study was to evaluate the efficacy of a quantitative light-induced fluorescence (QLF) device (QrayCam Pro, AIOBIO, Seoul, Republic of Korea) in detecting and differentiating the severity of posterior proximal and occlusal primary caries. Materials and methods: The study included a total of 120 teeth in 60 patients (of both genders, aged between 21 and 38 years) between January and March 2024, one carious tooth and one sound tooth were selected at random in each patient. All occlusal surfaces were evaluated in accordance with the International Caries Detection and Assessment System (ICDAS) Nyvad Criteria, using the visual tactile method. The ICDAS employs a scoring system ranging from 0 to 6, while the Nyvad Criteria employs a similar scoring system. Addionally, the depth of the proximal lesions was scored (0-6) using bite-wing radiography. The quantitative values representing the maximum loss of fluorescence (∆Fmax) and the maximum change in the ratio of red and green fluorescence (∆Rmax) were obtained using the Q-ray Clinical software v 1.45. To assess the validity, the sensitivity, specificity, and area under the receiver operating characteristics curve (AUROC) were calculated. Spearman correlation coefficient was used to investigate the correlation between the findings of the traditional and QLF examination methods. Results: The AUROC values for both ∆Fmax and ∆Rmax were found to be excellent. The sensitivity of QrayCam Pro was found to be 84-88.6%, while the specificity was 100%. The correlation analysis demonstrated a strong correlation between scores obtained from the traditional examination and the QLF values. Conclusions: Based on the findings of this study, QrayCam Pro exhibits potential as a valuable additional tool for not only detecting caries but also for assessing their severity and activity. Clinical relevance: This study revealed that QrayCam Pro might be suggested as a precise tool for enhancing caries detection and assessment compared to traditional methods. By providing quantitative data on caries severity and activity, it enables more informed treatment decisions, potentially optimizing outcomes for patients.
Study of validity of autofluorescence-based incipient occlusal caries detection in vitro compared to DIAGNOdent pen

H. H. Zhu,Q. G. Chen,B. Lin,H. Chen

DOI: https://doi.org/10.1134/S1054660X12030310

IF: 1.2

2012-01-01

Laser Physics

Abstract:The validity of laser induced fluorescence spectroscopy for early diagnosis of occlusal caries irradiated by 403 nm diode laser compared to commercial device DIAGNOdent pen was investigated. The quantitative evaluation parameter based on the fluorescence intensity area ratio of different bands F(440–480 nm)/F(540–700 nm) was built. And the linear correlation analysis between fluorescence result and corresponding DIAGNOdent reading is performed to be r = −0.9085. Moreover, the factors of irradiation laser power and excited site influencing the fluorescence distribution was experimentally investigated. The result shows that the fluorescence spectra at different site of sound occlusal surface is different and the higher laser power will lower the sensitivity of evaluation parameter based on the red fluorescence region increasing. The work is of great significance for practical application of laser induced fluorescence at 403 nm.
Analysis of Changes in Optical Parameters in Methods to Detect Dental Caries Based on the Principle of QLF

王守涛,陈庆光,林斌,曹向群

DOI: https://doi.org/10.3788/gzxb20103904.0669

IF: 0.6

2010-01-01

ACTA PHOTONICA SINICA

Abstract:The complete pathological tooth model and the criterion of caries lesion extent are established.With the programme of Monte Carlo simulation algorithm,the process of fluorescence excitation and transmission in tooth tissue is completely simulated and the relationship between the changes of optical parameters caused by the tooth tissue lesions and fluorescence distribution of QLF ia also explored.And,the legitimacy of the process above is verified using fluorescent functional of tracepro software.With the increase of lesion extent in dental caries part,the results show that the difference of fluorescence distribution between healthy and diseased tissue are increased with the increase of scattering coefficient and the reduce of absorption coefficient and fluorescence quantum efficiency.
The Simulation Analysis of Quantitative Light Induced Fluorescence Based on Monte Carlo

陈庆光,王守涛,林斌

DOI: https://doi.org/10.3969/j.issn.1005-5630.2009.01.009

2009-01-01

Abstract:Quantitative light induced fluorescence(QLF)is diagnosis method of early caries detection using the relative distribution of light intensity on the exit surface caused by the changes of optical property of caries lesion tissue.Seven situations:μssound=15/mm,μscaries=(30、60、100、150、200、250、300)/mm are simulated based on the built model using Monte Carlo random statistical method.The relative distribution of light intensity on the exit surface is obtained and analyzed.The results show that the total fluorescence loss is direct proportion to the scattering coefficient of caries lesion and the fitting result showed the simple linear relationship.
New technique for detecting cracked teeth and evaluating the crack depth by contrast-enhanced cone beam computed tomography: an in vitro study

Jie Zhou,Jieni Fu,Mo Xiao,Feng Qiao,Tiantian Fu,Yangyang Lv,Fei Wu,Cuicui Sun,Peng Li,Ligeng Wu

DOI: https://doi.org/10.1186/s12903-022-02085-6

2022-03-02

BMC Oral Health

Abstract:Abstract Background Cracked teeth may cause various clinical symptoms depending on the extension depth of the crack and the subsequent bacterial infections. However, techniques to reliably determine the extension depths of cracks in teeth before treatment are lacking. The aim of this study was to develop a new technique based on contrast-enhanced cone beam computed tomography (CBCT) to improve the accuracy of crack depth evaluation in vitro. Methods We developed an in vitro artificial simulation model of cracked teeth. Pre-experimental CBCT (pre-CBCT), and micro-computed tomography (micro-CT) were first performed for all cracked teeth (n = 31). Contrast-enhanced CBCT was then performed by infiltrating the crack with ioversol under vacuum conditions. The sensitivities of pre-CBCT and contrast-enhanced CBCT for the diagnosis of cracked teeth were calculated. According to the K-means clusters, crack depths measured by micro-CT were changed into categorical variables. Bland–Altman plot and the intraclass correlation coefficient (ICC) were used to analyze the consistency of the crack depths between the pre-CBCT and contrast-enhanced CBCT, as well as the ICC between the contrast-enhanced CBCT and micro-CT. Receiver operating characteristic (ROC) curves were generated to assess the ability for predicting crack depth in the differential diagnosis using pre-CBCT and contrast-enhanced CBCT. Restricted cubic splines were also used to model the non-linear relationship between the crack depths of contrast-enhanced CBCT and micro-CT. Results The sensitivities of pre-CBCT and contrast-enhanced CBCT were 48.4%, and 67.7%, respectively. The ICC value of crack depth as measured by pre-CBCT and contrast-enhanced CBCT was 0.847 (95% confidence interval [CI] 0.380–0.960; P < 0.001). The areas under ROC curves (AUC) of pre-CBCT and contrast-enhanced CBCT were different: the AUC of pre-CBCT was 0.958 ( P = 0.000, 95% CI 0.843–1.074), and the AUC of contrast-enhanced CBCT was 0.979 ( P = 0.000, 95% CI 0.921–1.037), and the difference was not statistically significant (Z = − 0.707, P = 0.480). The ICC value of crack depth as measured by contrast-enhanced CBCT and micro-CT was 0.753 (95% CI 0.248–0.911; P < 0.001). Conclusion Contrast-enhanced CBCT under vacuum conditions with a contrast medium can significantly improve the crack detection rate of cracked teeth; however, it cannot measure the crack depths accurately.

dentistry, oral surgery & medicine
Detection of pit and fissure sealant microleakage using quantitative light-induced fluorescence technology: an in vitro study

Sang-Mi Nam,Hye-Min Ku,Eun-Song Lee,Baek-Il Kim

DOI: https://doi.org/10.1038/s41598-024-59651-x

IF: 4.6

2024-04-21

Scientific Reports

Abstract:This in vitro study aimed to evaluate the feasibility of quantitative light-induced fluorescence (QLF) technology for detecting the presence and severity of microleakage of pit and fissure sealants. The areas of interest (AOIs) were 160 pits and fissures of 40 extracted permanent teeth. Fluorescent images were acquired using a QLF device, and the maximum fluorescence loss ΔF max of each AOI was analyzed. After staining and cross-sectioning of the teeth, histological dye penetration was scored on a scale of 0 to 3. The relationship between ΔF max and microleakage depth was analyzed, and the areas under the curve (AUCs) were calculated. The │ΔF max │ increased as microleakage depth increased. The ΔF max values of microleakage areas showed a strong significant correlation with the histological scores of dye penetration (r = − 0.72, P = 0.001). AUC analysis showed a high diagnostic accuracy for microleakage depth (AUC = 0.83–0.91). The highest AUC of 0.91 was found when differentiating the outer half microleakage of the sealant (histological score 0 vs. 1–3). QLF technology is effective in assessing the presence and severity of microleakage, suggesting its potential for noninvasive detection and monitoring of sealant microleakage in clinical settings.

multidisciplinary sciences
Using Meglumine Diatrizoate to Improve the Accuracy of Diagnosis of Cracked Teeth on Cone-beam CT Images

M. Yuan,A. T. Gao,T. M. Wang,J. H. Liang,G. B. Aihemati,Y. Cao,X. Xie,L. Y. Miao,Z. T. Lin

DOI: https://doi.org/10.1111/iej.13270

2020-01-01

International Endodontic Journal

Abstract:Aim To explore in a laboratory setting the feasibility of using Meglumine Diatrizoate (MD) to improve the accuracy of diagnosis of cracked teeth on cone-beam CT (CBCT) images. Methodology Twenty-four teeth were cracked artificially by soaking them cyclically in liquid nitrogen and hot water. The number and position of crack lines were evaluated with a dental operating microscope and used as the gold standard. The artificially cracked teeth were then examined using routine scanning (RS) and enhanced scanning (ES) modes, respectively. For the ES mode, MD was painted on the surface of the crack lines, and then, CBCT scanning with the same parameters was performed after 10 min. A radiological graduate student and an experienced radiologist evaluated the presence or absence of crack lines, respectively. The differences between the RS and ES modes were determined and assessed using McNemar's test. Inter-examiner agreement and intra-examiner agreement were assessed using kappa analysis. Results Fifty-seven crack lines were found in the 24 cracked teeth. In the RS mode, the accuracy of detection of crack lines was 23% (radiological graduate student) and 32% (experienced radiologist), whereas in the ES mode, the accuracy was 61% (radiological graduate student) and 65% (experienced radiologist). The inter-examiner agreement was 0.693 in RS mode and 0.849 in ES mode. The intra-examiner agreement was 0.872 and 0.949 for the radiological graduate student in RS and ES mode respectively; and one for the experienced radiologist both in RS and ES mode. Conclusions Compared with routine scanning mode, more crack lines could be detected in enhanced scanning mode using Meglumine Diatrizoate as a contrast medium. MD could be a potential contrast medium to improve the accuracy of detection of crack lines on CBCT images.
Role of the rho meson in the nonmesonic hypernuclear decay.

Parreño,Ramos,Bennhold

DOI: https://doi.org/10.1103/PHYSREVC.52.R1768

1995-10-01

Abstract:The {rho}-meson contribution to the {Lambda}{ital N}{r_arrow}{ital NN} process is studied in the nonmesonic decay of hypernuclei. It is found that the central potential of the {rho} exchange is larger than its tensor part and, therefore, must be included. This is in contrast to the {pi}-exchange term which is dominated by the tensor interaction.
Comparison of diagnosis of cracked tooth using contrast-enhanced CBCT and micro-CT

ZiYang Hu,TieMei Wang,Xiao Pan,DanTong Cao,JiaHao Liang,AnTian Gao,Xin Xie,Shi Xu,LeiYing Miao,ZiTong Lin

DOI: https://doi.org/10.1259/dmfr.20210003

2021-01-01

Dentomaxillofacial Radiology

Abstract:Objectives: To evaluate the diagnostic accuracy using sodium iodide (NaI) and dimethyl sulfoxide (DMSO) as contrast agent in cone beam computed tomography (CBCT) scanning, and compare this with micro-CT. Methods: 18 teeth were cracked artificially by soaking them cyclically in liquid nitrogen and hot water. After pre-treatment with artificial saliva, the teeth were scanned in four modes: CBCT routine scanning without contrast agent (RS); CBCT with meglumine diatrizoate (MD) as contrast agent (ES1); CBCT with NaI + DMSO as contrast agent (ES2); and micro-CT (mCT). The number of crack lines was evaluated in all four modes. Depth of crack lines and number of cracks presented from the occlusal surface to the pulp cavity (Np) in ES2 and micro-CT images were evaluated. Results: There were 63 crack lines in all 18 teeth. 45 crack lines were visible on ES2 images as against four on the RS and ES1 images (p<0.05) and 37 on micro-CT images (p>0.05). Further, 34 crack lines could be observed on both ES2 and micro-CT images, and the average depth presented on ES2 images was 4.56 +/- 0.88 mm and 3.89 +/- 1.08 mm on micro--CT images (p<0.05). More crack lines could be detected from the occlusal surface to the pulp cavity on ES2 images than on micro-CT images (22 vs 11). Conclusion: CBCT with NaI +DMSO as the contrast agent was equivalent to micro-CT for number of crack lines and better for depth of crack lines. NaI + DMSO could be a potential CBCT contrast agent to improve diagnostic accuracy for cracked tooth.
Quantitative Assessment of Early Caries Lesion Activity Using Novel Dye-Enhanced Fluorescence Imaging

Seok-Woo Park,Eun-Song Lee,Sang-Kyeom Kim,Hoi-In Jung,Baek-Il Kim

DOI: https://doi.org/10.1016/j.jdent.2024.105352

IF: 4.991

2024-09-15

Journal of Dentistry

Abstract:Objectives This study aimed to evaluate the validity of the dye-enhanced quantitative light-induced fluorescence (DEQLF) method for assessing early enamel caries activity. Methods Seventy extracted human teeth with early enamel caries on smooth surfaces were included. Two dentists evaluated the caries activity using the Nyvad system followed by the DEQLF method. The teeth were hydrated with distilled water for 60 s, dehydrated with compressed air for 10 s, and stained with 100 μM fluorescein sodium solution for 10 s. White and fluorescent images were captured using a QLF-D 2+ Billuminator. The change in fluorescence (ΔΔG) was calculated using an image analysis software. Independent-sample t-tests were performed to evaluate the difference in ΔΔG between active and inactive lesions for both DEQLF and conventional quantitative light-induced fluorescence (QLF) methods. Receiver operating characteristic (ROC) curve analysis was used to assess the validity of ΔΔG for distinguishing lesion activity using the area under the ROC curve (AUROC). Results Among 70 caries lesions, 33 were active and 37 were inactive. Using the DEQLF method, the ΔΔG for active lesions (3.8 ± 5.6) was significantly higher than that for inactive lesions (1.0 ± 2.5) (P < 0.05). With the conventional QLF method, there was no significant difference in ΔΔG between active (-1.1 ± 1.7) and inactive (-1.3 ± 1.7) lesions. DEQLF-derived ΔΔG demonstrated an AUROC of 0.72, a sensitivity of 0.67, and a specificity of 0.76. Conclusions Applying the DEQLF method to human teeth enabled the quantitative assessment of lesion activity based on dye penetration. DEQLF-derived ΔΔG values showed significant differences based on lesion activity status and demonstrated high validity in distinguishing lesion activity. Clinical significance Clinicians can use the DEQLF method, which involves applying a fluorescent dye for 10 s prior to conventional QLF, to objectively quantify and distinguish the activity status of early enamel caries, potentially replacing the traditional reliance on subjective visual assessments.

dentistry, oral surgery & medicine
Detection and Analysis of Enamel Cracks by ICG-NIR Fluorescence Dental Imaging.

Zhongqiang Li,Yoshita Holamoge,Zheng Li,Waleed Zaid,Michelle L. Osborn,Alexandra Ramos,Jacob T. Miller,Yanping Li,Shaomian Yao,Jian Xu

DOI: https://doi.org/10.1111/nyas.14374

IF: 6.499

2020-01-01

Annals of the New York Academy of Sciences

Abstract:Cracked teeth are the third most common cause of tooth loss, but there is no reliable imaging tool for the diagnosis of cracks. Here, we demonstrate the feasibility of indocyanine green near-infrared fluorescence (ICG-NIRF) dental imaging for the detection of enamel cracks and enamel-dentin cracks in vitro in the first (ICG-NIRF-I, 700-950 nm) and second (ICG-NIRF-II, 950-1700 nm) imaging windows with transmission excitation light, and compared ICG-NIRF with conventional NIR illumination-II (NIRi-II) and X-ray imaging. Dentin cracks were detected by CT scan, while most enamel cracks, undetectable under X-ray imaging, were clearly visible in NIR images. We found that ICG-NIRF-II detected cracks more effectively than NIRi-II, and that light orientation is an important factor for crack detection: an angled exposure obtained better image contrast of cracks than parallel exposure, as it created a shadow under the crack. Crack depth could be evaluated from the crack shadow in ICG-NIRF and NIRi-II images; from this shadow we could determine crack depth and discriminate enamel-dentin cracks from craze lines. Cracks could be observed clearly from ICG-NIRF images with 1-min ICG tooth immersion, although longer ICG immersion produced images with greater contrast. Overall, our data show that ICG-NIRF dental imaging is a useful tool for diagnosing cracked teeth at an early stage.
Detection of in vitro demineralization adjacent to restorations using quantitative light induced fluorescence (QLF)

I A Pretty,P W Smith,W M Edgar,S M Higham

DOI: https://doi.org/10.1016/s0109-5641(02)00079-9

Abstract:Aim: Quantitative light-induced fluorescence (QLF) is a technique for the detection, quantification, and longitudinal monitoring of early carious lesions. The technique is non-destructive and can be used in vivo. Using the natural fluorescence of teeth, and the loss of such fluorescence in demineralized enamel, QLF is a repeatable and valid optical caries monitor. Previously used in smooth and occlusal surfaces, the purpose of this pilot study was to determine if QLF could detect, and longitudinally monitor, demineralization adjacent to a range of restorative materials. Methods: Fifteen previously extracted lower third molars were selected based upon the lack of any visible demineralization. A single burr hole was placed on the buccal surface and the cavity restored with amalgam, composite, compomer, glass ionomer or a temporary filling material. The buccal surface was then coated in an acid resistant nail varnish leaving an exposed area around the restoration and also a similar sized control region. The teeth had QLF images taken at baseline and were then subjected to a demineralizing buffer, further QLF images were subsequently taken at 72 and 144 h. Transverse microradiography was used to confirm the presence of early, subsurface lesions at the completion of the cycle (144 h). QLF images were analyzed by a single blinded examiner and values for change in radiance fluorescence were computed. These values were recorded as loss of radiance fluorescence loss integrated over area of lesion and expressed as DeltaQ. Results: The appearance of each material under QLF and the change in fluorescence is described. Amalgam, glass ionomer and the temporary material all exhibited reduced fluorescence, while composite and compomer showed increased fluorescence, when compared with surrounding enamel. There was no change in fluorescence of the materials when subjected to experimental demineralizing conditions. Readings at 72 and 144 h demonstrated demineralization adjacent to the restorations and at the exposed control. Significant differences were detected between baseline, 72 and 144 h using ANOVA on all restorations with the exception of compomer where significance was noted between baseline and 144 h, p>0.05. Conclusions: This pilot study has demonstrated the ability for QLF to detect and monitor secondary caries. Analysis techniques should be based upon the subtraction of baseline DeltaQ scores from subsequent images. Further research is required to assess the ability of QLF to detect secondary lesions in vivo.
The exploration of a compound cone-beam CT contrast agent for diagnosis of human extracted cracked tooth

Ziyang Hu,Yanni Hu,Shi Xu,Jia Zhuang,Dantong Cao,Antian Gao,Xin Xie,Zitong Lin

DOI: https://doi.org/10.1016/j.heliyon.2024.e31036

IF: 3.776

2024-05-10

Heliyon

Abstract:Objectives: This study aims to investigate the use of sodium iodide (NaI), dimethyl sulfoxide (DMSO), ethyl alcohol, and ethyl acetate as cone-beam CT (CBCT) contrast agents for diagnosing cracked teeth. The optimal delay time for detecting the number of crack lines beyond the dentino-enamel junction (Nd), the number of cracks extending from the occlusal surface to the pulp cavity (Np), and the depth of the crack lines was explored. Methods: 14 human extracted cracked teeth were collected, 12 were used for enhanced scanning, and 2 were used for exploring the characteristic of crack lines. The teeth were scanned in 3 CBCT enhanced scanning (ES) modes: ES1 using meglumine diatrizoate (MD); ES2 using NaI and DMSO, ES3 using NaI, DMSO, ethyl alcohol and ethyl acetate. Three delay times (15mins, 30mins, and 60mins) were set for scanning. Nd, Np, and depth of crack lines were evaluated. Results: There were totally 24 crack lines on 12 cracked teeth. Nd was 10 in ES1 at 60mins, 24 in ES2 at 60mins and 24 in ES3 at 15mins. Np was 1 in ES1 at 60mins, 10 in ES2 at 60mins and 21 in ES3 at 60mins, and there were significantly different among them (p < 0.01). The average depth presented on ES3 was significantly deeper than ES1 and ES2 (p < 0.01). Conclusion: NaI, DMSO, ethyl alcohol and ethyl acetate show potential as contrast agents for enhanced CBCT scanning in diagnosis of cracked teeth and their depth in vivo. A delay time of 15 min is necessary to confirm the existence of crack lines, while a longer delay time is required to ascertain if these crack lines extend to the pulp cavity.
Three Visual-Diagnostic Methods for the Detection of Enamel Cracks: An In Vitro Study

Tim Hausdörfer,Lisa Harms,Philipp Kanzow,Michael Hülsmann

DOI: https://doi.org/10.3390/jcm12030973

2023-01-27

Abstract:Tooth fractures are a common cause of tooth loss, frequently starting as enamel cracks. However, methods for the detection of enamel cracks are poorly investigated. The aim of the study was the validation of three clinical methods for the detection of enamel cracks: dental operating microscope (DOM), near-infrared transillumination (NIR), and fiber-optic transillumination (FOTI), with hard-tissue slices serving as controls. A total of 89 extracted teeth, set up as diagnostic models, were investigated, and the maximum crack depth was scored by two examiners. The actual crack depth was determined microscopically (25×) using horizontal sections. The accuracy of each method was analyzed using receiver operating characteristic (ROC) curves. Across all tooth surfaces, the area under the curve (AUC) amounted to 0.57 (DOM), 0.70 (FOTI), and 0.67 (NIR). For crack detection on vestibular/oral surfaces, the AUC was 0.61 (DOM), 0.78 (FOTI), and 0.74 (NIR); for proximal surfaces, it was 0.59 (DOM), 0.65 (FOTI), and 0.67 (NIR). However, the actual crack depth was underestimated with each method (p < 0.001). Under in vitro conditions, FOTI and NIR are suitable for detection of enamel cracks, especially on vestibular and oral tooth surfaces. However, an exact estimation of crack depth is not possible. Therefore, FOTI and NIR seem to be helpful for the clinical detection of enamel cracks.
Finite element modeling of an intact and cracked mandibular second molar under quantitative percussion diagnostics loading

Jie Shen,Nasrin Taheri-Nassaj,Cherilyn G Sheets,James C Earthman

DOI: https://doi.org/10.1016/j.prosdent.2024.09.003

2024-09-26

Abstract:Statement of problem: Quantitative percussion diagnostics (QPD) has been devised to nondestructively evaluate the mechanical integrity of human teeth and implants, the mechanical integrity of the underlying bone, and the presence of cracks, but the mechanism is not clearly understood. Purpose: The purpose of this study is to better understand the dynamic behavior of a tooth under conditions consistent with QPD by focusing on physiologically accurate 3D finite element models of a human mandibular second molar with surrounding tissues. Material and methods: Finite element analysis (FEA) was used to study the force response of dental structures measured by the sensor in a QPD handpiece. A defect-free (intact) and a cracked tooth model containing a vertical crack involving enamel, dentin, periodontal ligament, bone, and the QPD percussion rod were used for this purpose. Different crack gap spaces were studied for comparison. The FEA model was validated with clinical QPD data for a second mandibular molar containing a vertical crack that subsequently had to be extracted. The location and size of the vertical crack was determined once the tooth was extracted. Results: The present FEA results exhibited features consistent with those of corresponding clinical data, thus verifying the model. An examination of the relative acceleration of the crack faces with respect to each other revealed that an oscillation between the crack surfaces results in secondary peaks in the QPD energy return response compared with that of an intact tooth. Conclusions: The present FEA modeling can generate simulated QPD results that exhibit established distinguishing characteristics in clinical QPD data for intact and cracked second mandibular molars. The model results also give insight into how QPD detects the presence of cracks and show that the oscillation of crack surfaces can produce the multipeak QPD results for a cracked molar observed clinically.
A Clinical Study of A Laser Fluorescence Device for the Detection of Approximal Caries in Primary Molars

Jianghao Chen,Man Qin,Wenli Ma,Lihong Ge

DOI: https://doi.org/10.1111/j.1365-263x.2011.01180.x

IF: 3.264

2011-01-01

International Journal of Paediatric Dentistry

Abstract:Objective. To evaluate the efficacy of laser fluorescence (LF) device in detecting approximal caries in primary molars.Methods. Two hundred and sixteen primary molars from 96 children were inspected visually to identify possible caries with contact approximal surfaces. Target molars and their contralateral molars were examined using bitewing radiographs (BR) and LF. Depending on the examination findings, invasive treatments were performed on molars to identify the presence of cavitation.Results. Of 256 surfaces evaluated from 216 primary molars, 128 were intact, 39 had white spots, and 89 had cavities. At the white- spot threshold, sensitivity and specificity, respectively, were 2.56% and 94.87% for visual inspection (VI); 64.10% and 97.43% for BR; and 56.41% and 94.87% for LF. At the cavity threshold, sensitivity and specificity, respectively, were 70.79% and 95.51% for VI; 97.75% and 93.26% for BR; and 92.14% and 97.75% for LF. Significant differences between intact surfaces and white spots, and white spots and cavities were shown through LF readings.Conclusions. Both LF and BR can detect cavitations on approximal surfaces of primary molars. LF could be an alternative to radiographs in detecting approximal caries in primary molars.
Atopy patch test (APT) in the diagnosis of food allergy in children with atopic dermatitis.

S. Levy,Sérgio Duarte Dortas Júnior,Andréa Huguenim Silva Pires,A. Abe,S. Valle,Vilma Perez Coelho,Ludwig Ruppert Hahnstadt,A. T. França

DOI: https://doi.org/10.1590/S0365-05962012000500009

IF: 2.113

2012-09-01

Anais Brasileiros de Dermatologia

Abstract:BACKGROUND Atopic Dermatitis is a chronic inflammatory skin disease. Food allergens are important in the pathogenesis in 1/3 of the cases. Several mechanisms are involved in the pathogenesis of Atopic Dermatitis. Immediate reactions are identified by both measurement of specific IgE and skin prick test. Atopy Patch Test seems to be relevant in the investigation of patients with suspected delayed-type reactions. OBJECTIVES To evaluate the standardization of this method concerning allergen concentration, occlusion time and interpretation, and determine the specificity and sensitivity of the Atopy Patch Test according to the skin prick test and specific IgE levels in food allergy diagnosis in children with Atopic Dermatitis. METHODS Seventy-two children, aged 2-12 years were selected and followed at the allergy clinic of the Hospital São Zacharias. Skin prick test, specific IgE and food Atopy Patch Test (cow's milk, egg, soy and wheat) were carried out. Three groups were submitted to the Atopy Patch Test: (1) Atopic Dermatitis with or without Rhinitis and Asthma; (2) Rhinitis and or Asthma without AD; (3) Healthy individuals. RESULTS In group 1, 40% of the patients presented positive reactions. The longer the exposure time (48h and 72h), the higher the sensitivity. In group 2, the test was more specific than sensitive for all the extracts, with increased sensitivity the longer the time of exposure (72h). In group 3, 8.3% presented positive tests. CONCLUSION APT evidenced a great diagnostic value in late-phase reactions to food, with high specificity. It showed to be a specific and reliable tool in comparison with the healthy group's results.
Scanning Laser-Line Source Technique for Nondestructive Evaluation of Cracks in Human Teeth

Kaihua Sun,Ling Yuan,Zhonghua Shen,Zhihong Xu,Qingping Zhu,Xiaowu Ni,Jian Lu

DOI: https://doi.org/10.1364/ao.53.002366

IF: 1.9

2014-01-01

Applied Optics

Abstract:This paper describes the first application of a remote nondestructive laser ultrasonic (LU) system for clinical diagnosis of cracks in human teeth, to our knowledge. It performs non-contact cracks detection on small-dimension teeth samples. Two extracted teeth with different types of cracks (cracked tooth and craze lines), which have different crack depths, are used as experimental samples. A series of ultrasonic waves were generated by a scanning laser-line source technique and detected with a laser-Doppler vibrometer on the two samples. The B-scan images and peak-to-peak amplitude variation curves of surface acoustic waves were obtained for evaluating the cracks' position and depth. The simulation results calculated by finite element method were combined with the experimental results for accurately measuring the depth of crack. The results demonstrate that this LU system has been successfully applied on crack evaluation of human teeth. And as a remote, nondestructive technique, it has great potential for early in vivo diagnosis of cracked tooth and even the future clinical dental tests.

Probabilities of dying from cancer and other causes in French cancer patients based on an unbiased estimator of net survival: a study of five common cancers.

Facile synthesis and versatile topological transformation of mono-cleavable symmetric starlike terpolymers.

The application of QLF technology in caries diagnosis

Validity assessment of a third-generation light-induced fluorescence device in detecting proximal and occlusal caries lesions: A cross-sectional study

Study of validity of autofluorescence-based incipient occlusal caries detection in vitro compared to DIAGNOdent pen

Analysis of Changes in Optical Parameters in Methods to Detect Dental Caries Based on the Principle of QLF

The Simulation Analysis of Quantitative Light Induced Fluorescence Based on Monte Carlo

New technique for detecting cracked teeth and evaluating the crack depth by contrast-enhanced cone beam computed tomography: an in vitro study

Detection of pit and fissure sealant microleakage using quantitative light-induced fluorescence technology: an in vitro study

Using Meglumine Diatrizoate to Improve the Accuracy of Diagnosis of Cracked Teeth on Cone-beam CT Images

Role of the rho meson in the nonmesonic hypernuclear decay.

Comparison of diagnosis of cracked tooth using contrast-enhanced CBCT and micro-CT

Quantitative Assessment of Early Caries Lesion Activity Using Novel Dye-Enhanced Fluorescence Imaging

Detection and Analysis of Enamel Cracks by ICG-NIR Fluorescence Dental Imaging.

Detection of in vitro demineralization adjacent to restorations using quantitative light induced fluorescence (QLF)

The exploration of a compound cone-beam CT contrast agent for diagnosis of human extracted cracked tooth

Three Visual-Diagnostic Methods for the Detection of Enamel Cracks: An In Vitro Study

Finite element modeling of an intact and cracked mandibular second molar under quantitative percussion diagnostics loading

A Clinical Study of A Laser Fluorescence Device for the Detection of Approximal Caries in Primary Molars

Atopy patch test (APT) in the diagnosis of food allergy in children with atopic dermatitis.

Scanning Laser-Line Source Technique for Nondestructive Evaluation of Cracks in Human Teeth