Forging the link between structure and function of electrogenic cotransporters: the renal type IIa Na+/Pi cotransporter as a case study.

I. Forster,K. Köhler,J. Biber,H. Murer

DOI: https://doi.org/10.1016/S0079-6107(02)00015-9

IF: 4.799

2002-11-01

Progress in Biophysics and Molecular Biology

Abstract:

What problem does this paper attempt to address?

Evaluation of a Weightbearing CT Artificial Intelligence-Based Automatic Measurement for the M1-M2 Intermetatarsal Angle in Hallux Valgus

Jonathan Day,Cesar de Cesar Netto,Martinus Richter,Nacime Salomao Mansur,Celine Fernando,Jonathan T. Deland,Scott J. Ellis,François Lintz

DOI: https://doi.org/10.1177/10711007211015177

2021-06-04

Abstract:Background: Weightbearing cone beam computed tomography (WBCT) has been gaining traction as a useful imaging modality in the diagnosis and follow-up of foot and ankle musculoskeletal pathologies due to the ability to perform quick, low-dose, 3-dimensional (3D) scans. However, the resulting wealth of 3D data renders daily clinical use time-consuming. The aim of this study was to evaluate a new artificial intelligence (AI)–based automatic measurement for the M1-M2 intermetatarsal angle (IMA) in hallux valgus (HV). We hypothesized that automatic and manual measurements would have a strong correlation, and that the AI software would yield better reproducibility and would be faster compared with manual measurements. Methods: This was a multicenter retrospective comparative case-control study in which a total of 128 feet were included from 93 patients who underwent WBCT scans as part of their routine follow-up: 59 feet with symptomatic HV and 69 controls. The IMA was measured automatically using the AI software and manually on digitally reconstructed radiographs (DRRs). The AI software produced both an automatic 2D (auto 2D) and 3D (auto 3D) measurement. Results: There were strong intermethod correlations between the DRR IMA and the auto 2D (HV, r = 0.61; control, r = 0.60; all P < .0001) and auto 3D (HV, r = 0.63; control, r = 0.52; all P < .0001) measurements, respectively. The intrasoftware reproducibility was very close to 100%. Measurements took 23.6 ± 2.31 seconds and 14.5 ± 1.18 seconds, respectively, when taken manually on DRRs and automatically. Controls demonstrated a mean DRR IMA of 8.6 (95% CI, 8.1-9.1), mean auto 2D of 11.2 (95% CI, 10.7-11.7), and mean auto 3D IMA of 11.0 (95% CI, 10.5-11.5). The HV group demonstrated significantly increased IMA compared with controls ( P < .0001), with a mean DRR IMA of 15.4 (95% CI, 14.8-16.1), mean auto 2D of 17.8 (95% CI, 17.2-18.4), and mean auto 3D IMA of 16.8 (95% CI, 16.8-17.4). Conclusion: Measurements generated by the WBCT AI-based automatic measurement system for IMA demonstrated strong correlations with manual measurements, with near-perfect reproducibility. Further developments are warranted in order to make this tool more usable in daily practice, particularly with respect to its use in the presence of hardware in the foot. Level of Evidence: Level III, retrospective comparative study.

orthopedics
Toward subtalar joint axis–driven computer-aided design and computer-aided manufacturing foot orthoses: Reliability of a noninvasive clinical scanning protocol

Clément Potier,Kurt Claeys,Kevin Deschamps

DOI: https://doi.org/10.1097/pxr.0000000000000343

2024-03-22

Abstract:Background: The subtalar joint axis (STJA) occupies a key role in the dynamics of the lower limb kinetic chain, and its location has a wide interindividual variability. It has been suggested that considering the STJA location when designing foot orthoses may help to apply the required mechanical dose. However, the evidence is more anecdotal than empirical. Objective: This study aimed to evaluate the reliability of the STJA digitization, a procedure combining the clinical determination of the functional STJA location and its subsequent 3-dimensional (3D) scanning. Study Design: Two examiners identified the posterior and anterior exit points of the functional STJA on the skin of 15 healthy participants using a clinical method in a repeated-measure design. Methods: A handheld 3D scanner was used to scan the feet and the skin markers. The 3D coordinates of the skin markers were subsequently quantified and (1) STJA digitization intratester within-session, (2) STJA digitization intratester between-session, and (3) STJA digitization intertester between-session reliabilities were evaluated. Results: When pooling all skin marker 3D coordinates, intraclass correlation coefficients (ICCs) for the STJA intratester within-session reliability ranged from 0.74 to 0.98. ICCs for the STJA digitization intratester between-session reliability ranged from 0.58 to 0.94. ICCs for the STJA digitization intertester reliability ranged from 0.56 to 0.81. Standard error of measurement for the mediolateral position of the talus marker (anterior exit point of the STJA) was substantially higher than that for the other coordinates. Conclusions: Overall, the STJA digitization demonstrated a good intratester between-session reliability and may be used in a computer-aided design and computer-aided manufacturing workflow to create foot orthoses. However, further efforts should be considered to improve the scanning process and intertester reliability.

rehabilitation,orthopedics
Hindfoot kinematics and kinetics - A combined in vivo and in silico analysis approach

Barbara Postolka,Bryce A Killen,Hannelore Boey,Tiago M Malaquias,Tassos Natsakis,Stefan Clockaerts,Dominique Misselyn,Walter Coudyzer,Jos Vander Sloten,Ilse Jonkers

DOI: https://doi.org/10.1016/j.gaitpost.2024.04.023

Abstract:Background: The complex anatomical structure of the foot-ankle imposes challenges to accurately quantify detailed hindfoot kinematics and estimate musculoskeletal loading parameters. Most systems used to capture or estimate dynamic joint function oversimplify the anatomical structure by reducing its complexity. Research question: Can four dimensional computed tomography (4D CT) imaging in combination with an innovative foot manipulator capture in vivo hindfoot kinematics during a simulated stance phase of walking and can talocrural and subtalar articular joint mechanics be estimated based on a detailed in silico musculoskeletal foot-ankle model. Methods: A foot manipulator imposed plantar/dorsiflexion and inversion/eversion representing a healthy stance phase of gait in 12 healthy participants while simultaneously acquiring 4D CT images. Participant-specific 3D hindfoot rotations and translations were calculated based on bone-specific anatomical coordinate systems. Articular cartilage contact area and contact pressure of the talocrural and subtalar joints were estimated using an extended foot-ankle model updated with an elastic foundation contact model upon prescribing the participant-specific rotations measured in the 4D CT measurement. Results: Plantar/dorsiflexion predominantly occurred at the talocrural joint (RoM 15.9±3.9°), while inversion/eversion (RoM 5.9±3.9°) occurred mostly at the subtalar joint, with the contact area being larger at the subtalar than at the talocrural joint. Contact pressure was evenly distributed between the talocrural and subtalar joint at the beginning of the simulated stance phase but was then redistributed from the talocrural to the subtalar joint with increasing dorsiflexion. Significance: In a clinical case study, the healthy participants were compared with four patients after surgically treaded intra-articular calcaneal fracture. The proposed workflow was able to detect small but meaningful differences in hindfoot kinematics and kinetics, indicative of remaining hindfoot pathomechanics that may influence the onset and progression of degenerative joint diseases.
Normative contact mechanics of the ankle Joint: Quantitative assessment utilizing bilateral weightbearing CT

Matthias Peiffer,Samir Ghandour,Nour Nassour,Atta Taseh,Arne Burssens,Gregory Waryasz,Lorena Bejarano-Pineda,Emmanuel Audenaert,Soheil Ashkani-Esfahani,Cristopher W. DiGiovanni

DOI: https://doi.org/10.1016/j.jbiomech.2024.112136

IF: 2.4

2024-05-06

Journal of Biomechanics

Abstract:Alterations in ankle's articular contact mechanics serve as one of the fundamental causes of significant pathology. Nevertheless, computationally intensive algorithms and lack of bilateral weightbearing imaging have rendered it difficult to investigate the normative articular contact stress and side-to-side differences. The aims of our study were two-fold: 1) to determine and quantify the presence of side-to-side contact differences in healthy ankles and 2) to establish normative ranges for articular ankle contact parameters. In this retrospective comparative study, 50 subjects with healthy ankles on bilateral weight-bearing CT were confirmed eligible. Segmentation into 3D bony models was performed semi-automatically, and individualized cartilage layers were modelled based on a previously validated methodology. Contact mechanics were evaluated by using the mean and maximum contact stress of the tibiotalar articulation. Absolute and percentage reference range values were determined for the side-to-side difference. Amongst a cohort of individuals devoid of ankle pathology, mean side-to-side variation in these measurements was 17 % talar peak stress and > 31 % talar mean stress indicate abnormality. No significant differences were found between laterality in any of the evaluated contact parameters. Understanding these values may promote a more accurate assessment of ankle joint biomechanics when distinguishing acceptable versus pathological contact mechanics in clinical practice.

engineering, biomedical,biophysics
Measurement of femoral posterior condylar offset and posterior tibial slope in normal knees based on 3D reconstruction

Liangxiao Bao,Shengwei Rong,Zhanjun Shi,Jian Wang,Yang Zhang

DOI: https://doi.org/10.1186/s12891-021-04367-6

IF: 2.562

2021-05-27

BMC Musculoskeletal Disorders

Abstract:Abstract Background Femoral posterior condylar offset (PCO) and posterior tibial slope (PTS) are important for postoperative range of motion after total knee arthroplasty (TKA). However, normative data of PCO and PTS and the correlation between them among healthy populations remain to be elucidated. The purpose of this study was to determine PCO and PTS in normal knees, and to identify the correlation between them. Methods Eighty healthy volunteers were recruited. CT scans were performed followed by three-dimensional reconstruction. PCO and PTS were measured and analyzed, as well as the correlation between them. Results PTS averaged 6.78° and 6.11°, on the medial and lateral side respectively ( P = 0.002). Medial PCO was greater than lateral (29.2 vs. 23.8 mm, P < 0.001). Both medial and lateral PCO of male were larger than female. On the contrary, male medial PTS was smaller than female, while there was no significant difference of lateral PTS between genders. There was an inverse correlation between medial PCO and PTS, but not lateral. Conclusions Significant differences exhibited between medial and lateral compartments, genders, and among individuals. An inverse correlation exists between PCO and PTS in the medial compartment. These results improve our understanding of the morphology and biomechanics of normal knees, and subsequently for optimising prosthetic design and surgical techniques.

orthopedics,rheumatology
Atlas-based automatic measurements of the morphology of the tibiofemoral joint

M. Brehler,G. Thawait,W. Shyr,J. Ramsay,J. H. Siewerdsen,W. Zbijewski

DOI: https://doi.org/10.1117/12.2255566

2017-03-13

Abstract:PURPOSE: Anatomical metrics of the tibiofemoral joint support assessment of joint stability and surgical planning. We propose an automated, atlas-based algorithm to streamline the measurements in 3D images of the joint and reduce user-dependence of the metrics arising from manual identification of the anatomical landmarks.METHODS: The method is initialized with coarse registrations of a set of atlas images to the fixed input image. The initial registrations are then refined separately for the tibia and femur and the best matching atlas is selected. Finally, the anatomical landmarks of the best matching atlas are transformed onto the input image by deforming a surface model of the atlas to fit the shape of the tibial plateau in the input image (a mesh-to-volume registration). We apply the method to weight-bearing volumetric images of the knee obtained from 23 subjects using an extremity cone-beam CT system. Results of the automated algorithm were compared to an expert radiologist for measurements of Static Alignment (SA), Medial Tibial Slope (MTS) and Lateral Tibial Slope (LTS).RESULTS: Intra-reader variability as high as ~10% for LTS and 7% for MTS (ratio of standard deviation to the mean in repeated measurements) was found for expert radiologist, illustrating the potential benefits of an automated approach in improving the precision of the metrics. The proposed method achieved excellent registration of the atlas mesh to the input volumes. The resulting automated measurements yielded high correlations with expert radiologist, as indicated by correlation coefficients of 0.72 for MTS, 0.8 for LTS, and 0.89 for SA.CONCLUSIONS: The automated method for measurement of anatomical metrics of the tibiofemoral joint achieves high correlation with expert radiologist without the need for time consuming and error prone manual selection of landmarks.
Reliability of Angle Measurements Based on the Epiphyseal Scar for Knee Osteotomy: An International Multicenter Radiographic Study

Philipp Schippers,Matthieu Peras,Bernard de Geofroy,Philipp Drees,Erol Gercek,Marius Junker,Lolita Micicoi,Jean-François Gonzalez,Grégoire Micicoi

DOI: https://doi.org/10.1177/23259671241252812

2024-07-26

Abstract:Background: The proximal tibial epiphyseal inclination can be used as a prognostic factor for good results after knee osteotomy and measured using the tibial bone varus angle (TBVA). This angle depends on the visibility of the epiphyseal plate, which has shown poor reproducibility when measured on standard radiographs by conventional methods. Purpose: To evaluate the measurement reliability of the TBVA and other angles based on the epiphyseal scar using a digital image display. Study design: Cohort study (diagnosis); Level of evidence, 3. Methods: A total of 100 whole-leg radiographs were analyzed twice by 3 orthopaedic surgeons from 2 countries in a blinded and randomized manner. Observers measured the hip-knee-ankle angle, mechanical lateral distal femoral angle, medial proximal tibial angle, and TBVA. The growth plate-tibial plateau (GPTP) angle, defined as the angle between the epiphyseal scar and tibial plateau, was measured; this angle has not yet been described for osteotomy. In addition, a modified version of the TBVA (mTBVA), defined as that between the epiphyseal scar, its center, and the center of the talus, was measured. The Ahlbäck score for osteoarthritis and a 3-grade score for epiphyseal scar visibility were also determined. The reliability of the angle measurements and scoring was evaluated using the Fleiss kappa and intraclass correlation coefficient (ICC). Results: The scores for epiphyseal scar visibility showed fair interobserver (Fleiss kappa correlation coefficient [κ] = 0.29-0.35) and strong intraobserver (Fleiss κ = 0.62-0.69) reliability. TBVA, GPTP angle, and mTBVA measurements showed good interobserver reliability (ICC, 0.76-0.77), while the GPTP angle achieved excellent intraobserver reliability (ICC, >0.9). Conclusion: Using digital image display, angles that depend on the epiphyseal scar-such as TBVA, GPTP angle, and mTBVA-can achieve acceptable measurement reliability despite the low agreement on the visibility of the epiphyseal scar.
IMU-Based Joint Angle Measurement for Gait Analysis

Thomas Seel,Jorg Raisch,Thomas Schauer,Jörg Raisch

DOI: https://doi.org/10.3390/s140406891

IF: 3.9

2014-04-16

Sensors

Abstract:This contribution is concerned with joint angle calculation based on inertial measurement data in the context of human motion analysis. Unlike most robotic devices, the human body lacks even surfaces and right angles. Therefore, we focus on methods that avoid assuming certain orientations in which the sensors are mounted with respect to the body segments. After a review of available methods that may cope with this challenge, we present a set of new methods for: (1) joint axis and position identification; and (2) flexion/extension joint angle measurement. In particular, we propose methods that use only gyroscopes and accelerometers and, therefore, do not rely on a homogeneous magnetic field. We provide results from gait trials of a transfemoral amputee in which we compare the inertial measurement unit (IMU)-based methods to an optical 3D motion capture system. Unlike most authors, we place the optical markers on anatomical landmarks instead of attaching them to the IMUs. Root mean square errors of the knee flexion/extension angles are found to be less than 1° on the prosthesis and about 3° on the human leg. For the plantar/dorsiflexion of the ankle, both deviations are about 1°.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Cone-beam computed tomography imaging and three-dimensional analysis of midfoot joints during non-weightbearing and weightbearing in 11 healthy feet

Jarkko Kettunen,Nikke Partio,Jari Salo,Tero Yli-Kyyny,Tommi Kiekara,Ville M Mattila,Heidi Haapasalo

DOI: https://doi.org/10.1177/02841851241262479

2024-07-23

Acta Radiologica

Abstract:Background Studies report that Lisfranc injury is more common than thought. Several imaging methods for assessing the stability of Lisfranc injury have been described but many are impossible to standardize and not accurate enough. Purpose To present a three-dimensional (3D) method for analyzing the changes in the joint space width of the midfoot joint and the joints of the medial part of the Lisfranc complex in healthy individuals. Material and Methods Non-weightbearing and weightbearing cone-beam computed tomography (CBCT) images of 11 healthy feet were acquired and analyzed with 3D software. The mean range of joint space width changes of each joint was computed from the changes in individual image pairs. Results 3D analysis software was used to analyze the medial part of the Lisfranc complex. In this sample of healthy feet, the changes in the joint spaces in the medial part of Lisfranc complex, calculated with 3D analysis software, was less than 0.6 mm. The distance between bones increased or decreased, depending on which part of the joint surface the measurements were taken. Conclusion In this study, we present a 3D analysis method to evaluate midfoot joint space width changes. Our analysis revealed that in healthy feet there are only minimal changes in the joint space width between weightbearing and non-weightbearing indicating minimal movement of the midtarsal joints. The 3D analysis of weightbearing CBCT data provides a promising tool for analyzing the small midfoot joints in a variety of conditions.

radiology, nuclear medicine & medical imaging
Implementing automated 3D measurements to quantify reference values and side-to-side differences in the ankle syndesmosis

Matthias Peiffer,Ide Van Den Borre,Tanguy Segers,Soheil Ashkani-Esfahani,Daniel Guss,Cesar De Cesar Netto,Christopher W. DiGiovanni,Jan Victor,Emmanuel Audenaert,Arne Burssens

DOI: https://doi.org/10.1038/s41598-023-40599-3

IF: 4.6

2023-08-25

Scientific Reports

Abstract:Detection of syndesmotic ankle instability remains challenging in clinical practice due to the limitations of two-dimensional (2D) measurements. The transition to automated three-dimensional (3D) measurement techniques is on the verge of a breakthrough but normative and side-to-side comparative data are missing. Therefore, our study aim was two-fold: (1) to establish 3D anatomical reference values of the ankle syndesmosis based on automated measurements and (2) to determine to what extent the ankle syndesmosis is symmetric across all 3D measurements. Patients without syndesmotic pathology with a non-weight-bearing CT scan (NWBCT; N = 38; Age = 51.6 ± 17.43 years) and weight-bearing CT scan (WBCT; N = 43; Age = 48.9 ± 14.3 years) were retrospectively included. After training and validation of a neural network to automate the segmentation of 3D ankle models, an iterative closest point registration was performed to superimpose the left on the right ankle. Subsequently, 3D measurements were manually and automatically computed using a custom-made algorithm and side-to-side comparison of these landmarks allowed one to investigate symmetry. Intra-observer analysis showed excellent agreements for all manual measurements (ICC range 0.85–0.99) and good (i.e. < 2.7° for the angles and 0.05). In clinical practice, our novel algorithm could surmount the current limitations of manual 2D measurements and distinguish patients with a syndesmotic ankle lesion from normal variance.

multidisciplinary sciences
Taxon-specific ζ-Crystallin in Japanese Tree Frog (Hyla japonica) Lens*

Y. Fujii,H. Kimoto,K. Ishikawa,Kikuko Watanabe,Y. Yokota,N. Nakai,Akira Taketo

DOI: https://doi.org/10.1074/JBC.M102880200

IF: 5.485

2001-07-27

Journal of Biological Chemistry

Abstract:The present study demonstrated that the 38-kDa protein, instead of ρ-crystallin (36 kDa), is expressed taxon specifically in the lens of Japanese tree frog (Hyla japonica). The 38-kDa protein was distinguished from ρ-crystallin expressed in the lenses of bullfrog (Rana catesbeiana) and European common frog (Rana temporaria) immunochemically. Although the N terminus of the 38-kDa protein was blocked, the analyses of partial amino acid sequences showed that the protein was ζ-crystallin. Analysis of cDNA sequence encoding ζ-crystallin of the tree frog lens demonstrated that the deduced protein consisted of 329 amino acids including initial methionine and having 62.2 and 62.9% identity with ζ-crystallin of camel and guinea pig lenses, respectively. The molecular mass of the deduced structure was calculated to be 35,564 Da. ζ-Crystallin of the tree frog lens exhibited the intrinsic enzymatic activity of quinone reductase (EC 1.6.99.2, NADPH:quinone oxidoreductase). The crystallin specifically catalyzed the reduction of 9,10-phenanthrenequinone (K m , 42 μm) using NADPH (K m , 60 μm) as a cofactor. The enzymatic activity was inhibited by dicumarol, anti-coagulant drug, with IC50 of 4 μm. On gel filtration chromatography, the crystallin was recovered as 150-kDa molecular mass complex, indicating that the crystallin was homotetramer consisting of 38-kDa subunits. The crystallin gene was expressed specifically in the lens. These results show that taxon-specific crystallins such as ζ- and ρ-crystallins may be available for the biochemical discrimination ofHyla- and Rana groups among frogs.
Changes in Selected Radiographic Parameters in Feet after Arthroplasty of First Metatarsophalangeal Joint (MTP-1) - Pilot Study

Sławomir Duda,Kamil Adamczyk,Jakub Adamczyk,Tomasz Potaczek,Jacek Lorkowski,Barbara Jasiewicz

DOI: https://doi.org/10.5604/01.3001.0054.7268

2024-06-30

Abstract:Background: Hallux rigidus is found in more than 2% of individuals aged 50 and above. As this condition progresses, mobility in the first metatarsophalangeal (MTP-1) joint decreases, leading practically to rigid fixation of the toe in the plantar flexion position, while pain and joint deformity caused by osteophytes intensify over time. Surgical approaches for hallux rigidus include joint arthroplasty of the first metatarsophalangeal joint, which is commonly employed. This study aimed to assess selected radiographic parameters of the foot before and after MTP-1 joint arthroplasty. Material and methods: The study involved 15 patients (15 feet), comprising 11 women and 4 men, at an average age of 54.7 years (range: 43 to 70). All participants underwent arthroplasty of MTP-1 using the Tornier FGT endoprosthesis. Various radiologic parameters were examined, including the hallux valgus angle, intermetatarsal angle, Horton's index, Meary's angle, Nikolaev's angle, and hallux angle in a lateral view. Results: Radiological measurements were analysed using the R3.6.2 statistical package (R Core Team, 2019). After surgery, Horton's index showed a significant increase, rising from 7.2 to 8. Additionally, the HVA-L angle increased from 11.26 to 14.4. Conclusion: Arthroplasty of MTP-1 produces significant changes in radiographic parameters of foot statics.
Development and validation of a fully automated tool to quantify 3D foot and ankle alignment using weight-bearing CT

Ide Van den Borre,Matthias Peiffer,Roel Huysentruyt,Manu Huyghe,Jean Vervelghe,Aleksandra Pizurica,Emmanuel A Audenaert,Arne Burssens

DOI: https://doi.org/10.1016/j.gaitpost.2024.05.029

Abstract:Introduction: Foot and ankle alignment plays a pivotal role in human gait and posture. Traditional assessment methods, relying on 2D standing radiographs, present limitations in capturing the dynamic 3D nature of foot alignment during weight-bearing and are prone to observer error. This study aims to integrate weight-bearing CT (WBCT) imaging and advanced deep learning (DL) techniques to automate and enhance quantification of the 3D foot and ankle alignment. Methods: Thirty-two patients who underwent a WBCT of the foot and ankle were retrospectively included. After training and validation of a 3D nnU-Net model on 45 cases to automate the segmentation into bony models, 35 clinically relevant 3D measurements were automatically computed using a custom-made tool. Automated measurements were assessed for accuracy against manual measurements, while the latter were analyzed for inter-observer reliability. Results: DL-segmentation results showed a mean dice coefficient of 0.95 and mean Hausdorff distance of 1.41 mm. A good to excellent reliability and mean prediction error of under 2 degrees was found for all angles except the talonavicular coverage angle and distal metatarsal articular angle. Conclusion: In summary, this study introduces a fully automated framework for quantifying foot and ankle alignment, showcasing reliability comparable to current clinical practice measurements. This operator-friendly and time-efficient tool holds promise for implementation in clinical settings, benefiting both radiologists and surgeons. Future studies are encouraged to assess the tool's impact on streamlining image assessment workflows in a clinical environment.
Ankle and subtalar joint axes of rotation and center of rotation during walking and running in healthy individuals measured using dynamic biplane radiography

Paige Paulus,Tom Gale,Joshua Setliff,Tetsuya Yamamoto,Shumeng Yang,Jessica Brown,Maria Munsch,MaCalus Hogan,William Anderst

DOI: https://doi.org/10.1016/j.jbiomech.2023.111837

Abstract:The goal of this study was to determine how foot type and activity level affect ankle and hindfoot motion. Dynamic biplane radiography and a validated volumetric registration process was used to measure ankle and hindfoot motion of 20 healthy adults during walking and running. The helical axes of motion (HAM) during stance were calculated at the tibiotalar and subtalar joints. The intersection of each HAM and the rotation plane of interest defined the tibiotalar and subtalar centers of rotation (COR). Correlations between foot type and hindfoot kinematics were calculated using Pearson's correlations. The effect of activity, phase of gait, and dominant vs. non-dominant limb on HAM and COR were evaluated using linear mixed effects models. Activity and phase of gait influenced the superior location of the tibiotalar (p < 0.041) and subtalar (p < 0.044) CORs. Activity and gait phase affected tibiotalar (p < 0.049) and subtalar (p < 0.044) HAM direction during gait. Both HAM orientation and COR location changed with activity and phase of gait. These ankle and hindfoot kinematics have implications for total ankle replacement design and musculoskeletal models that estimate force and moment generating capabilities of muscles.
Assessing the AIR Classification Reliability for Estimating Pronation of the First Metatarsal

Ning Sun,Xuewen Wang,Xiangyu Xu,Heng Li,Wenjing Li,Hui Du,Xiaofeng Gong,Yong Wu

DOI: https://doi.org/10.21203/rs.3.rs-4200830/v1

2024-01-01

Abstract:Abstract Background Hallux valgus (HV) is a multiplanar deformity and surgical treatment is often guided by two-dimensional radiographic parameters. This study assessed the reliability and accuracy of the AIR classification(The first metatarsal head's lateral edge can be delineated as angular (type A), round (type R), or intermediate (type I) through visual scrutiny or circle measurements on weight-bearing adiographs.)commonly used in clinical settings to categorize the shape of the lateral edge of the first metatarsal head, against measurements from weight-bearing computed tomography (WBCT). Methods This retrospective study evaluated 18 patients, including 31 feet affected by HV. Two surgeons independently categorized the first metatarsal head's lateral edge by both visual inspection and circle measurement. Additionally, two separate surgeons evaluated the α angle relative to the floor in WBCT scans. The reliability of the measurements was assessed using intraclass correlation coefficients (ICC) and weighted kappa statistics. Results While the first surgeon demonstrated perfect intra-observer reliability for both visual inspection and circular measurements (kappa values of 1.000 and 0.857, respectively), the second surgeon showed high and perfect reliability (kappa values of 0.759 and 1.000, respectively) for the same assessments. While the interobserver reliability for visual inspection was moderate (kappa values of 0.407 and 0.531, respectively), it was little to low for circular measurements (kappa values of 0.173 and 0.287, respectively). The interobserver reliability for the α angle assessment relative to the floor on WBCT scans was perfect (ICC=0.968). Conclusion The AIR classification may not provide a reliable estimation of the pronation of the first metatarsal and thus cannot be relied upon solely for intraoperative direct orthopedic treatments. Consequently, it is imperative to employ three-dimensional measurements instead of relying exclusively on plain radiography. WBCT measurements should also be considered for the preoperative determination of the optimal pronation angle correction to facilitate accurate intraoperative evaluation of the correction degree.
Different Positions of Weightbearing CT Images Can Influence the Hindfoot Alignment Evaluation Using 2-Dimensional Methodology

Mingjie Zhu,Wanjun Gu,Chao Wang,Songmin Sun,Sera Sempson,Mingzhu Zhang,Kenneth J. Hunt,Mark S. Myerson,Shuyuan Li

DOI: https://doi.org/10.1177/10711007241286889

IF: 3.569

2024-10-27

Foot & Ankle International

Abstract:Foot &Ankle International, Ahead of Print. Background:Three-dimensional weightbearing CT (WBCT) has been widely used to assess foot and ankle alignment. However, most current measurement methods are based on 2-dimensional concepts—distance, long axis, angulation, etc—and are sensitive to changes in orientation of the WBCT images. This study demonstrated how changes in positioning of the image can significantly influence the evaluation of hindfoot alignment.Methods:WBCT scans of 10 feet without deformities were used. In the horizontal view, the long axis of the foot image was aligned to a neutral position and then rotated 5, 10, 15, and 20 degrees both internally and externally to simulate malposition. The Calcaneal Moment Arm (CMA) was measured by 2 investigators independently in the above positions. An intraclass correlation coefficient (ICC) model was used to assess the intra- and interobserver reliabilities. The correlation between the CMA and the rotation angle of the foot images was analyzed using linear regression.Results:The CMA measurements demonstrated that internal rotation of the image changed the neutral hindfoot into valgus, whereas external rotation led to varus. A 1-degree internal or external rotation of the image correlated with 0.48 (±0.03) mm increase or decrease in the modified WBCT-CMA value (P < .0001, R2 = 0.6406).Conclusion:This study demonstrated that although 3D WBCT provides the ability to observe the foot from different perspectives, current alignment evaluation tools are limited to 2 dimensions. Therefore, positioning the WBCT images in a consistent orientation is important to generate correct data.

orthopedics
Point vs. traditional method evaluation of hallux valgus: interreader reliability and intermethod performance using X-ray and MRI

Nathan Heineman,Avneesh Chhabra,Lihua Zhang,Riham Dessouky,Dane Wukich

DOI: https://doi.org/10.1007/s00256-018-3022-5

2018-07-12

Skeletal Radiology

Abstract:BackgroundThe two most widely used measurements for diagnosing and assessing the severity of hallux valgus are the hallux valgus angle (HVA) and the intermetatarsal angle (IMA). Traditionally, these have been measured by using the midaxial lines approximating the axis of each bone. A new simpler point method has been recently suggested for measuring these angles by connecting points along the medial corners of each bone. Interreader reliability of these measurements on X-ray and MRI as well as intermethod and intermodality differences have not been assessed.MethodsA series of 56 consecutive patients between 18 and 100 years old with no history of foot trauma or orthopedic hardware in their feet were included. All had AP and lateral X-rays and MRI performed on the same foot between April 27, 2015 and March 9, 2016. Two readers measured HVA and IMA using both the traditional midaxial and new point methods. ICC correlations were obtained.ResultsThe interreader reliability for HVA was similar on point method (0.92) and traditional method (0.94). For the IMA, the ICC was 0.77 on point method versus 0.76 on traditional method. The intermodality agreement (between X-ray and MRI) was higher for HVA (ICC = 0.85, 0.88) as compared to IMA (0.58, 0.74), respectively on both methods. The mean difference between the methods was larger on traditional method = 5.5 for HVA and 2.5° for IMA.ConclusionsHVA is more reliable than IMA on both methods and modalities and a significant difference exists between the magnitudes of values obtained using the two methods.Level of Clinical Evidence: 3

radiology, nuclear medicine & medical imaging,orthopedics
Distal Metatarsal Articular Angle in Hallux Valgus Deformity. Fact or Fiction? A 3-Dimensional Weightbearing CT Assessment

Matthieu Lalevée,Nacime Salomao Barbachan Mansur,Hee Young Lee,Connor J. Maly,Caleb J. Iehl,Caio Nery,François Lintz,Cesar de Cesar Netto

DOI: https://doi.org/10.1177/10711007211051642

2021-11-13

Abstract:Background The Distal Metatarsal Articular Angle (DMAA) was previously described as an increase in valgus deformity of the distal articular surface of the first metatarsal (M1) in hallux valgus (HV). Several studies have reported poor reliability of this measurement. Some authors have even called into question its existence and consider it to be the consequence of M1 pronation resulting in projection of the round-shaped lateral edge of M1 head. Our study aimed to compare the DMAA in HV and control populations, before and after computer correction of M1 pronation and plantarflexion with a dedicated weightbearing CT (WBCT) software. We hypothesized that after computerized correction, DMAA will not be increased in HV compared to controls. Methods: We performed a retrospective case-control study including 36 HV and 20 control feet. In both groups, DMAA was measured as initially described on conventional radiographs (XR-DMAA) and WBCT by measuring the angle between the distal articular surface and the longitudinal axis of M1. Then, the DMAA was measured after computerized correction of M1 plantarflexion and coronal plane rotation using the α angle (3d-DMAA). Results: The XR-DMAA and the 3d-DMAA showed higher significant mean values in HV group compared to controls (respectively 25.9 ± 7.3 vs 7.6 ± 4.2 degrees, P < .001, and 11.9 ± 4.9 vs 3.3 ± 2.9 degrees, P < .001). Comparing a small subset of precorrected juvenile HV (n=8) and nonjuvenile HV (n=28) demonstrated no significant difference in the measure DMAA values. On the other hand, the α angle was significantly higher in the juvenile HV group (21.6 ± 9.9 and 11.4 ± 3.7 degrees; P = .0046). Conclusion: Although the valgus deformity of M1 distal articular surface in HV is overestimated on conventional radiographs, comparing to controls showed that an 8.6 degrees increase remained after confounding factors’ correction. Clinical Relevance: After pronation computerized correction, an increase in valgus of M1 distal articular surface was still present in HV compared to controls. Level of Evidence: Level III, retrospective case-control study.

orthopedics
Quantification of inertial sensor-based 3D joint angle measurement accuracy using an instrumented gimbal

A. Brennan,J. Zhang,K. Deluzio,Q. Li

DOI: https://doi.org/10.1016/j.gaitpost.2011.05.018

2011-07-01

Abstract:This study quantified the accuracy of inertial sensors in 3D anatomical joint angle measurement with respect to an instrumented gimbal. The gimbal rotated about three axes and directly measured the angles in the ISB recommended knee joint coordinate system. Through the use of sensor attachment devices physically fixed to the gimbal, the joint angle estimation error due to sensor attachment (the inaccuracy of the sensor attachment matrix) was essentially eliminated, leaving only error due to the inertial sensors. The angle estimation error (RMSE) corresponding to the sensor was found to be 3.20° in flexion/extension, 3.42° in abduction/adduction and 2.88° in internal/external rotation. Bland-Altman means of maximum absolute value were -1.63° inflexion/extension, 3.22° in abduction/adduction and -2.61° in internal/external rotation. The magnitude of the errors reported in this study imply that even under ideal conditions irreproducible in human gait studies, inertial angle measurement will be subject to errors of a few degrees. Conversely, the reported errors are smaller than those reported previously in human gait studies, which suggest that the sensor attachment is also significant source of error in inertial gait measurement. The proposed apparatus and methodology could be used to quantify the performance of different sensor systems and orientation estimation algorithms, and to verify experimental protocols before human experimentation.

neurosciences,orthopedics,sport sciences
Talar Dome Investigation and Talocrural Joint Axis Analysis Based on Three-Dimensional (3D) Models: Implications for Prosthetic Design.

Da-Hang Zhao,Di-Chao Huang,Gong-Hao Zhang,Yun-Ping Fan,Jian Yu,Shao-Bai Wang,Kan Wang,Xin Ma

DOI: https://doi.org/10.1155/2019/8634159

2019-01-01

BioMed Research International

Abstract:Ankle joint kinematics is mainly stabilized by the morphology of the talar dome and the articular surface of tibiofibular mortise as well as the medial and lateral ligament complexes. Because of this the bicondylar geometry of talus dome is believed to be crucial for ankle implant design. However, little data exist describing the precise anatomy of the talar dome and the talocrural joint axis. The aim of this study is to document the anatomy of the talar dome and the axis of the talocrural joint using three-dimensional (3D) computed tomographic (CT) modeling. Seventy-one participants enrolled for CT scanning and 3D talar model reconstruction. All the ankles were held in a neutral position during the CT scanning. Six points on the lateral and medial crest of the talar dome were defined. The coordinate of the six points; radii of lateral-anterior (R-LA), lateral-posterior (R-LP), medial-anterior (R-MA), and medial-posterior (R-MP) sections; and inclination angle of the talar dome were measured, and the inclination and deviation angles of the talocrural joint axis were determined. The mean values of R-LA, R-LP, R-MA, and R-MP were 19.23 ± 2.47 mm, 18.76 ± 2.90 mm, 17.02 ± 3.49 mm, and 22.75 ± 3.04 mm. The mean inclination angle of the talar dome was 9.86 ± 3.30 degrees. Gender variation was found in this parameter. The mean inclination and deviation angles were 8.60 ± 0.07 and 0.76 ± 0.69 degrees for the dorsiflexion axis and -7.34 ± 0.07 and 0.09 ± 0.18 degrees for the plantarflexion axis. Bilateral asymmetries between the medial and lateral crest of the talar dome were found, which resulted in different dorsiflexion and plantarflexion axes of the talocrural joint. Currently, no ankle implants replicate this talar anatomy, and these findings should be considered in future implant designs.

Forging the link between structure and function of electrogenic cotransporters: the renal type IIa Na+/Pi cotransporter as a case study.

Evaluation of a Weightbearing CT Artificial Intelligence-Based Automatic Measurement for the M1-M2 Intermetatarsal Angle in Hallux Valgus

Toward subtalar joint axis–driven computer-aided design and computer-aided manufacturing foot orthoses: Reliability of a noninvasive clinical scanning protocol

Hindfoot kinematics and kinetics - A combined in vivo and in silico analysis approach

Normative contact mechanics of the ankle Joint: Quantitative assessment utilizing bilateral weightbearing CT

Measurement of femoral posterior condylar offset and posterior tibial slope in normal knees based on 3D reconstruction

Atlas-based automatic measurements of the morphology of the tibiofemoral joint

Reliability of Angle Measurements Based on the Epiphyseal Scar for Knee Osteotomy: An International Multicenter Radiographic Study

IMU-Based Joint Angle Measurement for Gait Analysis

Cone-beam computed tomography imaging and three-dimensional analysis of midfoot joints during non-weightbearing and weightbearing in 11 healthy feet

Implementing automated 3D measurements to quantify reference values and side-to-side differences in the ankle syndesmosis

Taxon-specific ζ-Crystallin in Japanese Tree Frog (Hyla japonica) Lens*

Changes in Selected Radiographic Parameters in Feet after Arthroplasty of First Metatarsophalangeal Joint (MTP-1) - Pilot Study

Development and validation of a fully automated tool to quantify 3D foot and ankle alignment using weight-bearing CT

Ankle and subtalar joint axes of rotation and center of rotation during walking and running in healthy individuals measured using dynamic biplane radiography

Assessing the AIR Classification Reliability for Estimating Pronation of the First Metatarsal

Different Positions of Weightbearing CT Images Can Influence the Hindfoot Alignment Evaluation Using 2-Dimensional Methodology

Point vs. traditional method evaluation of hallux valgus: interreader reliability and intermethod performance using X-ray and MRI

Distal Metatarsal Articular Angle in Hallux Valgus Deformity. Fact or Fiction? A 3-Dimensional Weightbearing CT Assessment

Quantification of inertial sensor-based 3D joint angle measurement accuracy using an instrumented gimbal

Talar Dome Investigation and Talocrural Joint Axis Analysis Based on Three-Dimensional (3D) Models: Implications for Prosthetic Design.