[Cross-circulation respiratory assistance in experimental acute hypercapnia].

J. Gille,C. Saunier,Q. T. Pham,P. Horský

Abstract:

What problem does this paper attempt to address?

A New Positioning Method Based on Multiple Ultrasonic Sensors for Autonomous Mobile Robot.

Mingqi Shen,Yuying Wang,Yandan Jiang,Haifeng Ji,Baoliang Wang,Zhiyao Huang

DOI: https://doi.org/10.3390/s20010017

IF: 3.9

2019-01-01

Sensors

Abstract:This work proposes a new positioning method based on multiple ultrasonic sensors for the autonomous mobile robot. Unlike the conventional ultrasonic positioning methods, this new method can realize higher accuracy ultrasonic positioning without additional temperature information. Three ultrasonic sensors are used for positioning. A generalized measurement model is established for general sensor configuration. A simplified measurement model, which considers the computational complexity, is also established for linear/simplified sensor configuration. Three time-of-flight signals are obtained from the three ultrasonic sensors. The coordinates of the target are calculated by the ratios of time-of-flights. Positioning experiments were carried out to verify the feasibility and effectiveness of the proposed method. Experimental results show that the new ultrasonic positioning method is effective, both the two established models can implement positioning successfully, and the positioning accuracy is satisfactory. Compared with the conventional ultrasonic positioning method with the default ultrasonic velocity, the positioning accuracy is greatly improved by the proposed method. Compared with the ultrasonic positioning method with additional temperature compensation, the results obtained by the proposed method are comparable.
Accurate integrated position measurement system for mobile applications in GPS-denied coal mine

Yuming Cui,Songyong Liu,Hongsheng Li,Congcong Gu,Hongxiang Jiang,Deyuan Meng

DOI: https://doi.org/10.1016/j.isatra.2023.04.014

Abstract:The automatic positioning of underground mobile applications plays a crucial role in enabling intelligent coal mining. However, due to the diverse kinematics and dynamics of these applications, various positioning methods have been proposed to match different targets. Nonetheless, the accuracy and applicability of these methods still fall short of meeting the requirements for field applications. Based on the vibration characteristics of underground mobile devices, a multi-sensor fusion positioning system is developed to enhance the accuracy of positioning in long and narrow global positioning system denied (GPS-denied) underground coal mine roadways. The system combines inertial navigation (INS), odometer, and ultra wide band (UWB) technologies through extended Kalman filter (EKF) and unscented Kalman filter (UKF). This approach enables accurate positioning by recognizing target carrier vibrations and facilitating fast conversion between multi-sensor fusion modes. The proposed system is tested on both a small unmanned mine vehicle (UMV) and a large roadheader, demonstrating that UKF enhances stability for roadheaders with strong nonlinear vibrations while EKF is more suitable for flexible UMVs. Detailed results confirm that the proposed system achieves an accuracy level of 0.15 m, meeting most coal mine application requirements.
Research on Visual–Inertial Measurement Unit Fusion Simultaneous Localization and Mapping Algorithm for Complex Terrain in Open-Pit Mines

Yuanbin Xiao,Wubin Xu,Bing Li,Hanwen Zhang,Bo Xu,Weixin Zhou

DOI: https://doi.org/10.3390/s24227360

IF: 3.9

2024-11-27

Sensors

Abstract:As mining technology advances, intelligent robots in open-pit mining require precise localization and digital maps. Nonetheless, significant pitch variations, uneven highways, and rocky surfaces with minimal texture present substantial challenges to the precision of feature extraction and positioning in traditional visual SLAM systems, owing to the intricate terrain features of open-pit mines. This study proposes an improved SLAM technique that integrates visual and Inertial Measurement Unit (IMU) data to address these challenges. The method incorporates a point–line feature fusion matching strategy to enhance the quality and stability of line feature extraction. It integrates an enhanced Line Segment Detection (LSD) algorithm with short segment culling and approximate line merging techniques. The combination of IMU pre-integration and visual feature restrictions is executed inside a tightly coupled visual–inertial framework utilizing a sliding window approach for back-end optimization, enhancing system robustness and precision. Experimental results demonstrate that the suggested method improves RMSE accuracy by 36.62% and 26.88% on the MH and VR sequences of the EuRoC dataset, respectively, compared to ORB-SLAM3. The improved SLAM system significantly reduces trajectory drift in the simulated open-pit mining tests, improving localization accuracy by 40.62% and 61.32%. The results indicate that the proposed method demonstrates significance.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
A Coupled Visual and Inertial Measurement Units Method for Locating and Mapping in Coal Mine Tunnel

Daixian Zhu,Kangkang Ji,Dong Wu,Shulin Liu

DOI: https://doi.org/10.3390/s22197437

2022-09-30

Abstract:Mobile robots moving fast or in scenes with poor lighting conditions often cause the loss of visual feature tracking. In coal mine tunnels, the ground is often bumpy and the lighting is uneven. During the movement of the mobile robot in this scene, there will be violent bumps. The localization technology through visual features is greatly affected by the illumination and the speed of the camera movement. To solve the localization and mapping problem in an environment similar to underground coal mine tunnels, we improve a localization and mapping algorithm based on a monocular camera and an Inertial Measurement Unit (IMU). A feature-matching method that combines point and line features is designed to improve the robustness of the algorithm in the presence of degraded scene structure and insufficient illumination. The tightly coupled method is used to establish visual feature constraints and IMU pre-integration constraints. A keyframe nonlinear optimization algorithm based on sliding windows is used to accomplish state estimation. Extensive simulations and practical environment verification show that the improved simultaneous localization and mapping (SLAM) system with a monocular camera and IMU fusion can achieve accurate autonomous localization and map construction in scenes with insufficient light such as coal mine tunnels.
Ultrasonic Array-Based Multi-Source Fusion Indoor Positioning Technology

Cong Li,Chenning Zhang,Bing Chen,Shaojian Xu,Luping Xu,Bo Yan

DOI: https://doi.org/10.3390/s24206641

IF: 3.9

2024-10-16

Sensors

Abstract:Underground mining involves numerous risks, such as collapses, gas leaks, and explosions, posing significant threats to worker safety. In this work, we develop an indoor localization system that uses Bluetooth for coarse positioning and ultrasonic arrays for precision calibration. This system is particularly useful for automated mining operations in underground environments where satellite positioning signals are unavailable. The indoor localization system consists of ultrasonic receiver arrays and an improved multi-transmitter-multi-receiver algorithm, enabling accurate localization within the mining environment. Geometric Dilution of Precision (GDOP) analysis is incorporated to optimize the network layout, and an inertial navigation module is integrated to track the posture of moving objects, enabling precise trajectory determination over large areas, such as coal mines. In the experiment, three traditional methods were compared, and the proposed tracking approach demonstrated a positioning accuracy within 10 cm, reducing error by 20% compared to conventional techniques. This high-precision indoor localization method proves beneficial for underground mining applications.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
A Multimodal Robust Simultaneous Localization and Mapping Approach Driven by Geodesic Coordinates for Coal Mine Mobile Robots

Menggang Li,Kun Hu,Yuwang Liu,Eryi Hu,Chaoquan Tang,Hua Zhu,Gongbo Zhou

DOI: https://doi.org/10.3390/rs15215093

IF: 5

2023-10-25

Remote Sensing

Abstract:Mobile robots in complex underground coal mine environments are still unable to achieve accurate pose estimation and the real-time reconstruction of scenes with absolute geographic information. Integrated terrestrial-underground localization and mapping technologies have still not been effectively developed. This paper proposes a multimodal robust SLAM method based on wireless beacon-assisted geographic information transmission and lidar-IMU-UWB elastic fusion mechanism (LIU-SLAM). In order to obtain the pose estimation and scene models consistent with the geographic information, the construction of two kinds of absolute geographic information constraints based on UWB beacons is proposed. An elastic multimodal fusion state estimation mechanism is designed based on incremental factor graph optimization. A tightly coupled lidar-inertial odometry is firstly designed to construct the lidar-inertial local transformation constraints, which are further integrated with the absolute geographic constraints by UWB anchors through a loosely coupled approach. Extensive field tests based on coal mine robots have been conducted in scenarios such as underground garages and underground coal mine laneways. The results show that the proposed geodesic-coordinate driven multimode robust SLAM method can obtain absolute localization accuracy within 25 cm with practical robustness and real-time performance in different underground application scenarios. The wireless beacon-assisted geodesic-coordinate transmission strategy can provide a plug-and-play customized solution for precise positioning and scene modeling in complex scenarios of various coal mine robot application.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
A Multi-Stage Visual Positioning Method for Autonomous Underwater Docking

Xinlong Chen,Shuo Liu,Tao Wang,Jingyang Li,Tian Xia

DOI: https://doi.org/10.1109/oceans51537.2024.10682180

2024-01-01

Abstract:Due to limited battery and storage space, the Autonomous Underwater Vehicles (AUVs) need to complete docking with the subsea docking station (SDS) for charging and data transmission. To ensure successful docking, accurate terminal positioning is crucial. We propose a novel multi-stage visual positioning method that segments terminal navigation into two distinct stages, focusing on different targets: active lights and passive markers. Additionally, we incorporate a neural network to augment the algorithm's robustness, thereby enabling AUVs to achieve whole-process high-precision positioning. The efficacy of our positioning approach has been substantiated through in-air testing, and the viability of our medium-range positioning algorithm has been demonstrated through underwater trials. The forthcoming phase involves integrating this algorithm into the AUV's system to execute actual docking task.
Tightly coupled IMU-Laser-RTK odometry algorithm for underground multi-layer and large-scale environment

Minghao Wang,Ming Cong,Dong Liu,Yu Du,Xiaojing Tian,Bing Li

DOI: https://doi.org/10.1108/ir-11-2022-0281

2023-09-07

Industrial Robot

Abstract:Purpose The purpose of this study is to designed a robot odometry based on three dimensional (3D) laser point cloud data, inertial measurement unit (IMU) data and real-time kinematic (RTK) data in underground spatial features and gravity fluctuations environment. This method improves the mapping accuracy in two types of underground space: multi-layer space and large-scale scenarios. Design/methodology/approach An IMU–Laser–RTK fusion mapping algorithm based on Iterative Kalman Filter was proposed, and the observation equation and Jacobian matrix were derived. Aiming at the problem of inaccurate gravity estimation, the optimization of gravity is transformed into the optimization of SO(3), which avoids the problem of gravity over-parameterization. Findings Compared with the optimization method, the computational cost is reduced. Without relying on the wheel speed odometer, the robot synchronization localization and 3D environment modeling for multi-layer space are realized. The performance of the proposed algorithm is tested and compared in two types of underground space, and the robustness and accuracy in multi-layer space and large-scale scenarios are verified. The results show that the root mean square error of the proposed algorithm is 0.061 m, which achieves higher accuracy than other algorithms. Originality/value Based on the problem of large loop and low feature scale, this algorithm can better complete the map loop and self-positioning, and its root mean square error is more than double compared with other methods. The method proposed in this paper can better complete the autonomous positioning of the robot in the underground space with hierarchical feature degradation, and at the same time, an accurate 3D map can be constructed for subsequent research.

English Else
A Multi-Sensor Fusion Autonomous Driving Localization System for Mining Environments

Yi Wang,Chungming Own,Haitao Zhang,Minzhou Luo

DOI: https://doi.org/10.3390/electronics13234717

IF: 2.9

2024-11-30

Electronics

Abstract:We propose a multi-sensor fusion localization framework for autonomous heavy-duty trucks suitable for mining scenarios, which enables high-precision, real-time trajectory generation, and map construction. The motion estimated through pre-integration of the inertial measurement unit (IMU) can eliminate distortions in the point cloud and provide an initial guess for LiDAR odometry optimization. The point cloud information obtained from LiDAR can assist in recovering depth information from image features extracted by the monocular camera. To ensure real-time performance, we introduce an iKD-tree to organize the point cloud data. To address issues arising from bumpy road segments and long-distance driving in practical mining scenarios, we can incorporate a large number of relative and absolute measurements from different sources, such as GPS information and AprilTag-assisted localization data, including loop closure, as factors in the system. The proposed method has been extensively evaluated on public datasets and self-collected datasets from mining sites.

engineering, electrical & electronic,computer science, information systems,physics, applied
Design and application research of mine underground disaster relief personnel positioning system based on MEMS sensor

Yue Zhao,Chengyong Duan,Jianyong Wang

DOI: https://doi.org/10.1117/12.2639253

2022-06-30

Abstract:In order to solve the problem of low positioning accuracy of disaster relief personnel and rescue efficiency when a disaster occurs in a coal mine, this paper proposes a disaster relief personnel positioning system for coal mine based on Micro-Electro-Mechanical System (MEMS) sensor. The proposed system uses the MPU9150 inertial sensor to obtain measurement data and the CC2530 microprocessor as the main control chip for data acquisition and processing. In the proposed system, the Pedestrian Dead Reckoning (PDR) algorithm is used to determine the step size based on the fusion expression between the walking frequency variance and acceleration, and the quaternion method is used to estimate pedestrian orientation angle. In order to reduce the error caused by the drift of the accelerometer and gyroscope, the extended Kalman filter is employed to correct the original data. The experimental results show that the positioning error of the proposed system is less than 1.6 m in 100 m. Thus, the proposed method can achieve high accuracy in the disaster relief personnel positioning in an underground coal mine.

Environmental Science,Engineering
Research on IMU-Assisted UWB-Based Positioning Algorithm in Underground Coal Mines

Lei Wang,Shangqi Zhang,Junyan Qi,Hongren Chen,Ruifu Yuan

DOI: https://doi.org/10.3390/mi14071481

2023-07-24

Abstract:The application of an ultra-wideband (UWB) positioning system in a Global Positioning System (GPS) denial environment such as an underground coal mine, mainly focuses on position information and rarely involves information such as direction attitude. Position accuracy is often affected by multipath, non-visible ranges, base station layout, and more. We proposed an IMU-assisted UWB-based positioning system for the provision of positioning and orientation services to coal miners in underground mines. The Error-State Kalman Filter (ESKF) is used to filter the errors in the measured data from the IMU-assisted UWB positioning system to obtain the best estimate of the error for the current situation and correct for inaccuracies due to approximations. The base station layout of the IMU-assisted UWB positioning system was also simulated. The reasonable setting of the reference base station location can suppress multi-access interference and improve positioning accuracy to a certain extent. Numerous simulation experiments have been conducted in GPS denial environments, such as underground coal mines. The experimental results show the effectiveness of the method for determining the position, direction, and attitude of the coal miner under the mine, which provides a better reference value for positioning and orientation in a GPS rejection environment such as under the mine.
Tightly Coupled LIDAR/IMU/UWB Fusion via Resilient Factor Graph for Quadruped Robot Positioning

Yujin Kuang,Tongfei Hu,Mujiao Ouyang,Yuan Yang,Xiaoguo Zhang

DOI: https://doi.org/10.3390/rs16224171

IF: 5

2024-11-09

Remote Sensing

Abstract:Continuous accurate positioning in global navigation satellite system (GNSS)-denied environments is essential for robot navigation. Significant advances have been made with light detection and ranging (LiDAR)-inertial measurement unit (IMU) techniques, especially in challenging environments with varying lighting and other complexities. However, the LiDAR/IMU method relies on a recursive positioning principle, resulting in the gradual accumulation and dispersion of errors over time. To address these challenges, this study proposes a tightly coupled LiDAR/IMU/UWB fusion approach that integrates an ultra-wideband (UWB) positioning technique. First, a lightweight point cloud segmentation and constraint algorithm is designed to minimize elevation errors and reduce computational demands. Second, a multi-decision non-line-of-sight (NLOS) recognition module using information entropy is employed to mitigate NLOS errors. Finally, a tightly coupled framework via a resilient mechanism is proposed to achieve reliable position estimation for quadruped robots. Experimental results demonstrate that our system provides robust positioning results even in LiDAR-limited and NLOS conditions, maintaining low time costs.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
LiDAR-IMU-UWB-Based Collaborative Localization

Chuanwei Zhang,Xiaowen Ma,Peilin Qin

DOI: https://doi.org/10.3390/wevj13020032

IF: 2.3

2022-02-01

World Electric Vehicle Journal

Abstract:This article introduced a positioning system composed of different sensors, such as LiDAR, IMU, and ultra-wideband (UWB), for the positioning method in autonomous driving technology under closed coal mine tunnels. First, we processed the LiDAR data, extracted its feature points and merged the extracted feature point clouds to generate a skewed combined feature point cloud. Then, we used the skew combined feature point clouds for feature matching, performed pre-integration processing on the IMU sensor data, and completed the LiDAR-IMU odometer with the LiDAR. Finally, we added UWB data to IMU pose node as a one-dimensional over-edge constraint. By updating the sliding window, the positioning accuracy was further improved. Moreover, we have conducted experiments to verify the proposed positioning system in a simulated roadway. The experimental results showed that the method proposed in this paper is superior to the single LiDAR method and the single UWB method in terms of positioning accuracy.
3D SLAM based on NDT matching and ground constraints for ground robots in complex environments

Yi Jiang,Ting Wang,Shiliang Shao,Lebing Wang

DOI: https://doi.org/10.1108/ir-05-2022-0128

2022-08-23

Industrial Robot

Abstract:Purpose In large-scale environments and unstructured scenarios, the accuracy and robustness of traditional light detection and ranging (LiDAR) simultaneous localization and mapping (SLAM) algorithms are reduced, and the algorithms might even be completely ineffective. To overcome these problems, this study aims to propose a 3D LiDAR SLAM method for ground-based mobile robots, which uses a 3D LiDAR fusion inertial measurement unit (IMU) to establish an environment map and realize real-time localization. Design/methodology/approach First, we use a normal distributions transform (NDT) algorithm based on a local map with a corresponding motion prediction model for point cloud registration in the front-end. Next, point cloud features are tightly coupled with IMU angle constraints, ground constraints and gravity constraints for graph-based optimization in the back-end. Subsequently, the cumulative error is reduced by adding loop closure detection. Findings The algorithm is tested using a public data set containing indoor and outdoor scenarios. The results confirm that the proposed algorithm has high accuracy and robustness. Originality/value To improve the accuracy and robustness of SLAM, this method proposed in the paper introduced the NDT algorithm in the front-end and designed ground constraints and gravity constraints in the back-end. The proposed method has a satisfactory performance when applied to ground-based mobile robots in complex environments experiments.
Efficient Laser-Based 3D SLAM for Coal Mine Rescue Robots

Menggang Li,Hua Zhu,Shaoze You,Lei Wang,Chaoquan Tang

DOI: https://doi.org/10.1109/access.2018.2889304

IF: 3.9

2019-01-01

IEEE Access

Abstract:An accurate description of laneway space with self-localization is a key issue when coal mine rescue robots (CMRRs) perform post-disaster exploration and rescue missions. The 3D simultaneous localization and mapping (SLAM) is an effective but time-critical and highly challenging task in complex laneway scenarios, especially after disasters. In this paper, we propose a novel real-time 3D SLAM based on normally distributed transform (NDT) that employs pose graph optimization and loop closure to further improve mapping consistency. We innovatively extract floors and walls in the laneway as plane nodes to construct landmark constraints, in addition to applying pose nodes from the lidar odometry via NDT. A lightweight and effective loop detection method is conducted using odometry with an appearance-based approach to building a globally consistent map. The proposed method was evaluated on a public dataset, and field tests in an underground coal mine were performed. Results indicate that our algorithm can achieve lower computational complexity and drift, which can provide pose estimation and environment description for CMRRs to realize remote control assistance and automatic navigation in coal mine rescue missions.
Multi-Position Inertial Alignment Method for Underground Pipelines Using Data Backtracking Based on Single-Axis FOG/MIMU

Jiachen Liu,Lu Wang,Yutong Zu,Yuanbiao Hu

DOI: https://doi.org/10.3390/mi15091168

IF: 3.4

2024-09-22

Micromachines

Abstract:The inertial measurement method of pipelines utilizes a Micro-Electro-Mechanical Systems Inertial Measurement Unit (MIMU) to get the three-dimensional trajectory of underground pipelines. The initial attitude is significant for the inertial measurement method of pipelines. The traditional method to obtain the initial attitude uses three-axis magnetometers to measure the Earth's magnetic field. However, the magnetic field in urban underground pipelines is intricate, which leads to the initial attitude being inaccurate. To overcome this challenge, a novel multi-position initial alignment method based on data backtracking for a single-axis FOG and a three-axis Micro-Electro-Mechanical Inertial Measurement Unit (MIMU) is proposed. Firstly, the configuration of the sensors is determined. Secondly, according to the three-point support structure of the pipeline measuring instrument, a three-position alignment scheme is designed. Additionally, an initial alignment algorithm using the data backtracking method is developed. In this algorithm, a rough initial alignment is conducted by the data from single-axis FOG, and a fine initial alignment is conducted by the data from FOG/MIMU. Finally, an experiment was conducted to validate this method. The experiment results indicate that the pitch and roll angle errors are less than 0.05°, and the azimuth angle errors are less than 0.2°. This improved the precision of the 3-D trajectory of underground pipelines.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Research on internal positioning method of pipeline robot based on data fusion and point cloud registration

Song Xu,Guolei Wang,Dan Wu

DOI: https://doi.org/10.1117/12.2640080

2022-01-01

Abstract:Limited by the shielding effect from the pipeline structure and materials, pipeline robots usually rely on sensors such as odometers and inertial measurement units (IMUs), resulting in significant error accumulation effect and difficulty in ameliorating positioning accuracy. In this paper, we present an internal positioning method in the pipeline based on data fusion and point cloud registration to improve this problem. First of all, the Extended Kalman Filter (EKF) fuses the odometer and IMU data, acquiring the estimated pose's initial value and calculating the derived position. Secondly, the conditional filtering of the known pipeline point cloud is carried out using the derived position to solve the inaccurate problem caused by the significant difference in the number of points between the two groups in point cloud matching. Eventually, the improved iterative closest point (ICP) algorithm is applied to the filtered point cloud and the data of the two line-laser sensors, obtaining accurate pose information of the robot. The proposed method enables the robot to locate only by its sensor data, which is especially suitable for use in pipelines where the environment is harsh and wireless signals are often not received. In our experiments, we first demonstrate the effectiveness and necessity of point cloud filtering, and then compare our algorithm with the traditional intralocalization algorithms under the Gazebo/ROS simulation platform. The results show that the positioning accuracy of our method is better than the traditional internal positioning method.
An Integrated Algorithm Fusing UWB Ranging Positioning and Visual–Inertial Information for Unmanned Vehicles

Shuang Li,Lihui Wang,Baoguo Yu,Xiaohu Liang,Shitong Du,Yifan Li,Zihan Yang

DOI: https://doi.org/10.3390/rs16234530

IF: 5

2024-12-04

Remote Sensing

Abstract:During the execution of autonomous tasks within sheltered space environments, unmanned vehicles demand highly precise and seamless continuous positioning capabilities. While the existing visual–inertial-based positioning methods can provide accurate poses over short distances, they are prone to error accumulation. Conversely, radio-based positioning techniques could offer absolute position information, yet they encountered difficulties in sheltered space scenarios. Usually, three or more base stations were required for localization. To address these issues, a binocular vision/inertia/ultra-wideband (UWB) combined positioning method based on factor graph optimization was proposed. This approach incorporated UWB ranging and positioning information into the visual–inertia system. Based on a sliding window, the joint nonlinear optimization of multi-source data, including IMU measurements, visual features, as well as UWB ranging and positioning information, was accomplished. Relying on visual inertial odometry, this methodology enabled autonomous positioning without the prerequisite for prior scene knowledge. When UWB base stations were available in the environment, their distance measurements or positioning information could be employed to institute global pose constraints in combination with visual–inertial odometry data. Through the joint optimization of UWB distance or positioning measurements and visual–inertial odometry data, the proposed method precisely ascertained the vehicle's position and effectively mitigated accumulated errors. The experimental results indicated that the positioning error of the proposed method was reduced by 51.4% compared to the traditional method, thereby fulfilling the requirements for the precise autonomous navigation of unmanned vehicles in sheltered space.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Efficient Laser-Based 3D SLAM in Real Time for Coal Mine Rescue Robots

Menggang Li,Hua Zhu,Shaoze You,Chaoquan Tang,Yutan Li

DOI: https://doi.org/10.1109/cyber.2018.8688349

2018-07-01

Abstract:The accurate description of laneway space with self-localization is a key issue when coal mine rescue robots (CMRRs) perform post-disaster exploration and rescue missions. 3D Simultaneous Localization and Mapping (SLAM) is an effective but time-critical with highly challenging task in semi-structured laneway environment. In this paper, we propose a novel real-time 3D SLAM based on Normal Distributed Transform (NDT) which also take pose graph optimization and loop closure to further improve the consistency of mapping. We innovatively extract the floors and walls as plane nodes to construct constraints, in addition to applying pose nodes from the lidar odometry. Edges of the graph are constructed by the observation constraints between pose nodes and plain nodes. A simple and effective loop detection method is used via odometry-based in conjunction with appearance-based approach to build a global consistent map. The proposed method has been evaluated on the public dataset KITTI and field tests in a simulated underground coal mine. The results indicate that our algorithm can achieve lower computational complexity and lower drift in well-conditioned scenes and degenerate scenes, which can provide pose estimation and environment description for CMRRs to realize remote control assistance and automatic navigation in the coal mine rescue missions.

[Cross-circulation respiratory assistance in experimental acute hypercapnia].

A New Positioning Method Based on Multiple Ultrasonic Sensors for Autonomous Mobile Robot.

Accurate integrated position measurement system for mobile applications in GPS-denied coal mine

Research on Visual–Inertial Measurement Unit Fusion Simultaneous Localization and Mapping Algorithm for Complex Terrain in Open-Pit Mines

A Coupled Visual and Inertial Measurement Units Method for Locating and Mapping in Coal Mine Tunnel

Ultrasonic Array-Based Multi-Source Fusion Indoor Positioning Technology

A Multimodal Robust Simultaneous Localization and Mapping Approach Driven by Geodesic Coordinates for Coal Mine Mobile Robots

A Multi-Stage Visual Positioning Method for Autonomous Underwater Docking

Tightly coupled IMU-Laser-RTK odometry algorithm for underground multi-layer and large-scale environment

A Multi-Sensor Fusion Autonomous Driving Localization System for Mining Environments

Design and application research of mine underground disaster relief personnel positioning system based on MEMS sensor

Research on IMU-Assisted UWB-Based Positioning Algorithm in Underground Coal Mines

Tightly Coupled LIDAR/IMU/UWB Fusion via Resilient Factor Graph for Quadruped Robot Positioning

LiDAR-IMU-UWB-Based Collaborative Localization

3D SLAM based on NDT matching and ground constraints for ground robots in complex environments

Efficient Laser-Based 3D SLAM for Coal Mine Rescue Robots

Multi-Position Inertial Alignment Method for Underground Pipelines Using Data Backtracking Based on Single-Axis FOG/MIMU

Research on internal positioning method of pipeline robot based on data fusion and point cloud registration

An Integrated Algorithm Fusing UWB Ranging Positioning and Visual–Inertial Information for Unmanned Vehicles

Efficient Laser-Based 3D SLAM in Real Time for Coal Mine Rescue Robots