Images of victory

Rachel Jones

DOI: https://doi.org/10.1038/nrn1272

IF: 38.755

2003-11-01

Nature Reviews Neuroscience

Abstract:

What problem does this paper attempt to address?

Constructing a Hierarchical Ternary Hybrid of PEDOT:PSS/rGO/MoS2 As an Efficient Electrode for a Flexible Fiber-Shaped Supercapacitor

Qinqin Zhou,Guanlin Lv,Xinyu Wang,Weili Teng,Peng Hu,Yucheng Du,Hongyi Li,Yuxiang Hu,Wenxin Liu,Jinshu Wang

DOI: https://doi.org/10.1021/acsaem.3c00187

IF: 6.4

2023-01-01

ACS Applied Energy Materials

Abstract:Improving the specific capacitance and energy densityof a fiber-shapedsupercapacitor (FSSC) is critical to its applications as an energystorage device for advanced smart wearable electronics. In this paper,a heterogeneous poly-(3,4-ethylenedioxythiophene):poly-(styrenesulfonate)/reducedgraphene oxide/molybdenum disulfide (PEDOT:PSS/rGO/MoS2) fiber was prepared to achieve a high-performance and durable electrodefor the FSSC. As indicated, pseudocapacitive MoS2 was insitu grown on a highly conductive acid-treated PEDOT:PSS/rGO assemblywith a hierarchical structure. This structural design emphasizes thewrinkled morphology and high conductivity of the PEDOT:PSS/rGO backboneto maximize the MoS2 deposition and accelerate its electrontransfer, which fully utilizes the pseudocapacitance of MoS2 and provides additional capacitance contribution to the obtaineddevice. Attributed to the synergy, the prepared fiber electrode inthe FSSC exhibits high volumetric/areal specific capacitance (325.8F cm(-3)/405.3 mF cm(-2) at 1 A cm(-3) or 1.2 mA cm(-2)) and excellent rateperformance (82%, 1-10 A cm(-3)). The correspondingdevice shows an ultrahigh volumetric energy density of 6.9 mW h cm(-3) at a high power density of 173.6 mW cm(-3) and an areal energy density of 8.5 mu W h cm(-2) at 215.9 mu W cm(-2), together with excellentcycle stability and mechanical flexibility, outperforming most ofthe previously reported FSSCs. Accordingly, the proposed strategyprovides a great opportunity to develop a high-performance FSSC forfurther wearable electronics.
Construction of hierarchical polypyrrole coated copper-catecholate grown on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) fibers for high-performance supercapacitors

Xiaoyu Li,Yuexin Liu,Mingyuan Gao,Kefeng Cai

DOI: https://doi.org/10.1016/j.jcis.2022.07.050

Abstract:Fiber-shaped supercapacitors (FSCs) are considered as the optimal candidate for wearable energy devices, due to their high safety, excellent electrochemical stability, workability and body adaptability. However, the specific capacitances of today's FSCs such as carbon nanotube fibers and graphene fibers, are still not high enough for practical applications due to the limitation of their energy storage mode. So, we design a ternary composite fiber-shaped electrode: First, a kind of metal organic framework (MOF), copper-catecholate (Cu-CAT) nanorods, are in-situ grown on a wet-spun poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) fiber at the ambient temperature. Second, polypyrrole (PPy) is electrodeposited on the surface of the Cu-CAT/PEDOT:PSS fiber to obtain PPy@Cu-CAT@PEDOT:PSS fiber (PPy@Cu-CAT@PF). The growing Cu-CAT with high porosity anchored on the fiber surface provides electrochemical activate sites and the encapsulation of PPy effectively provides a continuous charge transfer path and improve its cycling stability. Notably, the PPy@Cu-CAT@PF electrode exhibits a satisfactory areal capacitance of 669.93 mF cm-2 at 2 mA cm-2, which remains 61.66% even at a high current density of 20 mA cm-2. Furthermore, the assembled symmetric FSC displays excellent electrochemical properties and outstanding mechanical flexibility, demonstrating its feasibility as a wearable supercapacitor.
Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

Long Chen,Deping Li,Lina Chen,Pengchao Si,Jinkui Feng,Lin Zhang,Yanhui Li,Jun Lou,Lijie Ci

DOI: https://doi.org/10.1016/j.carbon.2018.06.022

IF: 10.9

2018-01-01

Carbon

Abstract:Carbon nanofibers yarns (CNY) have been prepared by carbonizing twisted electrospun PAN nanofibers, which can be used as the electrode of fiber-shaped all-solid-state supercapacitor after depositing conductive polymer of polypyrrole (PPy) and reduced graphene oxide (rGO) on their surface to form a core-shell structure (CNY@PPy@rGO). The flexible and binder-free fiber supercapacitors with PVA/H3PO4 gel electrolyte have a high specific capacitance (92.57 F/g, 80.46 F/cm3, 836.87 mF/cm2, and 111.46 mF/cm of CM, CV, CA, and CL, respectively, at the scan rate of 2 mV/s) thanks to the core-shell structure and synergistic effects of three conponents. It also shows high cycling performance with 86% capacitance retention after 10000 cycles with excellent flexibility and stability at different bending angles.
Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Zhen Li,Junjie Wei,Jing Ren,Xiaomin Wu,Liang Wang,Dengyu Pan,Minghong Wu

DOI: https://doi.org/10.1016/j.carbon.2019.08.040

IF: 10.9

2019-01-01

Carbon

Abstract:Carbon-based flexible fiber-based supercapacitors (FFSCs) are promising power sources for portable and wearable electronics, but their applications are limited by low energy density due to a lower specific capacitance of common carbon materials. We fabricated ternary all-carbon fiber electrodes (N-GQD/GH/CF) with improved electrochemical performance. In this structure, graphene hydrogel (GH) was grown on carbon fibers (CFs) to form a 3D interconnected porous network (GH/CF), and nitrogen-doped graphene quantum dots (N-GQDs) with high pseudocapacitive activity were electrodeposited into the GH/CF network. The ternary N-GQD/GH/CF hybrid electrode delivered a volumetric capacitance of 93.7 F cm(-3) at 20 mA cm(-3), which was around 7 times higher than that of the GH/CF, while the capacitance retention after 5000 cycles reached 87.9%, which was only a little lower than that of the GH/CF electrode (90.2%). It indicates the introduction of N-GQDs drastically improves the capacitance of the FFSCs without sacrificing the cycle stability. All-carbon asymmetric FFSCs were assembled using N-GQD/GH/CF as positive electrode and GH/CF as negative electrode. The assembled FFSCs exhibited a high energy density of 3.6 mW h cm(-3) at power density of 35.6 mW cm(-3) owing to the wider potential window (2 V) and the higher volumetric capacitance as well as excellent flexibility and cycling stability. (C) 2019 Elsevier Ltd. All rights reserved.
Sewable high-performance poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/layered double hydroxide core-shell fiber electrodes for flexible supercapacitors

Hui Huang,Yifeng Zhang,Yongpeng Zhao,Ningxuan Wen,Hao Zhang,Xueqing Zuo,Zhonghua Chen,Chen Sun,Zeng Fan,Lujun Pan

DOI: https://doi.org/10.1016/j.jpowsour.2023.233055

IF: 9.2

2023-04-11

Journal of Power Sources

Abstract:Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-based fibers are one of the most competitive fiber-type electrodes but still suffer from low electrochemical surface areas (ECSAs) and oversensitivity to humidity for fiber supercapacitor applications. Herein, through rational design, a sewable core-shell fiber electrode of PEDOT:PSS/waterborne polyurethane (WPU) fiber wrapped with nickel/cobalt-layered double hydroxides (NiCo-LDH) has been synthesized via wet-spinning and solution reaction. The fiber core acts as a conductive channel for charge carrier transport. The NiCo-LDH shell possesses unique hybrid architectures of honeycomb-like nanosheet array and hollow nanocages, which provide numerous electrochemical active sites. Simultaneously, the water barrier effect of the NiCo-LDH shell and the interaction between Co 2+ /Ni 2+ and PSS reduce fiber water uptake, thus endowing the fiber with a better geometric stability with low swelling ratio. The as-prepared PEDOT:PSS/LDH fiber has a large ECSA (4060 cm 2 g −1 ) and ultrahigh conductivities no matter in dry (1237.3 S cm −1 ) or wet (1018.7 S cm −1 ) state. It also exhibits a high capacitance (188.5 F g −1 at 1 A g −1 ) and long lifespan (capacitance retention of 94% after 10,000 cycles). The fiber-based supercapacitor shows superb flexibility with stable capacitive behavior under deformation. These characteristics manifest the potential of PEDOT:PSS/LDH fibers for stable high-performance energy storage to support wearable electronics.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Fabrication of PEDOT:PSS/rGO fibers with high flexibility and electrochemical performance for supercapacitors

Guoqiang Liu,Xiao Chen,Jing Liu,Congcong Liu,Jingkun Xu,Qinglin Jiang,Yanhua Jia,Fengxing Jiang,Xuemin Duan,Peipei Liu

DOI: https://doi.org/10.1016/j.electacta.2020.137363

IF: 6.6

2021-01-01

Electrochimica Acta

Abstract:Implantable, flexible and easily reconfigurable supercapacitors with high power and energy densities are considered necessary for the development of portable and wearable electronics. However, obtaining a fiber-incorporating high electrochemical performance and fracture elongation remains a huge challenge. Here, we prepare a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid)/reduced graphene oxide (PEDOT:PSS/rGO) fiber (PGF) with high-quality electrodes for supercapacitors by easily-accessible hydrothermal confinement reaction. The optimized P3G7F exhibits improved electrochemical performance including a high specific capacitance (Cs) of 249.5 F g−1 at 0.5 A g−1 and good cycling stability. Moreover, after introducing the PEDOT:PSS, the elongation at break of the P3G7F is doubled to 13.9%. A symmetric supercapacitor (SSC) based on the P3G7F displays a high specific energy density of 10.68 Wh kg−1 at a specific power density of 81.25 W kg−1. The improved performance of the fabricated composite fiber is attributed to the unique structures of the rGO and PEDOT:PSS and their synergistic effect. This study introduces an opportunity for the development of next-generation flexible and wearable devices.

electrochemistry
Coaxial core-sheath shaped supercapacitor based on polypyrrole functionalized graphene/carbon nanotubes hollow fibers with ultrahigh length specific capacitance and energy density for wearable electronics

Ruixue Li,Peng Song,Zhenyuan Ji,Hu Zhou,Yinxiu Xue,Lirong Kong,Xiaoping Shen

DOI: https://doi.org/10.1016/j.apsusc.2023.159188

IF: 6.7

2023-12-26

Applied Surface Science

Abstract:Coaxial fiber-shaped supercapacitors (FSCs) have received considerable attention due to the huge application potential in smart electronics, but their fabrications still remain challenging. Herein, using two polypyrrole functionalized graphene/carbon nanotubes hollow fibers (PPy/GCHF) with different diameters as electrodes, a coaxial FSC with a distinct core-sheath architecture is prepared. The outer scabbard electrode, PPy-750/GCHF 1.0 –8, in three-electrode, depicts a great linear capacitance of 791.9 mF cm −1 at 1 mA cm −1 with a capacity retention up to 93.2 % after 5000 charge–discharge cycles, which obviously exceeds most of the constructed fiber-shaped counterparts. Thanks to this skillful design, the PPy-750/GCHF 0.3 –8//PPy-750/GCHF 1.0 –8 FSC with efficiently shortened ion migration pathway and maximized contact area between gel electrolyte and electrodes shows an excellent linear capacitance of 561.9 mF cm −1 at 0.5 mA cm −1 with a great energy density of 49.9 μWh cm −1 , standing for one of the highest levels in FSCs. In addition, the core-sheath shaped device also affords superior mechanical flexibility and capacitive stability with capacitance retentions of 100–88.7 % from 0 to 120° bending and 84.2 % after 5000 charge–discharge cycles. The good energy storage behaviors and ingenious structure endow PPy-750/GCHF 0.3 –8//PPy-750/GCHF 1.0 –8 to have promising application prospects in wearable electronics.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Highly-conductive PEDOT:PSS hydrogel framework based hybrid fiber with high volumetric capacitance and excellent rate capability

Qinqin Zhou,Weili Teng,Yuhong Jin,Ling Sun,Peng Hu,Hongyi Li,Lianzhou Wang,Jinshu Wang

DOI: https://doi.org/10.1016/j.electacta.2019.135530

IF: 6.6

2020-02-01

Electrochimica Acta

Abstract:Fiber supercapacitors (FSCs) are attractive energy storage devices for wearable and portable electronics. However, it still remains a great challenge to achieve high volumetric specific capacitance without sacrificing the rate capability of FSC. Here, we demonstrate a novel hierarchically nanostructured hybrid fiber with thin polyaniline (PANI) layer anchored on the highly-conductive poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) hydrogel framework as electrodes for fiber supercapacitors. The hybrid fiber was prepared via hydrothermal assembly of a commercial PEDOT:PSS dispersion followed by acid treatment and in-situ chemical polymerization of aniline. The incorporation of highly-electroactive PANI boosts the whole capacitance of hybrid fiber; the robust PEDOT hydrogel framework provides abundant ions diffusion channels and rapid electron transfer pathways, improving the utilization efficiency and the kinetics of pseudocapacitance reaction of PANI. Attributed to the synergistic effect, the PEDOT/PANI hybrid fiber in FSC exhibits high volumetric/areal specific capacitance (554.1 F cm−3 or 740.0 mF cm−2 at 5 A cm−3), excellent rate performance and good electrochemical stability. The flexible FSC device delivers a high volumetric energy density of 11.9 mWh cm−3 at 981.4 mW cm−3 and areal energy density of 15.8 μWh cm−2 at 1310.5 μW cm−2, outperforming most of the reported counterparts. The well-designed PEDOT/PANI hybrid fiber based FSC hold a great potential for powering the next-generation wearable and portable electronics.

electrochemistry
DMSO-treated flexible PEDOT:PSS/PANi fiber electrode for high performance supercapacitors

Guoqiang Liu,Xiao Chen,Congcong Liu,Qinglin Jiang,Fengxing Jiang,Jianyu An,Jingkun Xu,Peipei Liu

DOI: https://doi.org/10.1007/s10853-021-06226-0

IF: 4.5

2021-06-15

Journal of Materials Science

Abstract:Wearable energy storage device nowadays gains great interest due to sharply increased demand for highly flexible, stretchable and embedded electronics, where fiber-based supercapacitor (FSC) is a competitive counterpart. The poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid)/ polyaniline (PEDOT:PSS/PANi) fiber has been prepared via an accessible technique of one-dimensional (1D) self-assembly. Nevertheless, PSS as the main cross-linking matrix may lead to more hopping sites for charge carriers, lessening the continuous electrically conductive path. Herein, PEDOT:PSS/PANi fiber was treated with dimethyl sulfoxide (DMSO) to remove the insulative PSS chains. Coupling high electroactivity of PANi and high conductivity of PEDOT, the optimized DMSO-PEDOT:PSS/PANi fiber displays enhanced electrochemical properties with a high specific capacitance (Cs) of 367.7 F g−1 at 0.5 A g−1 and good rate capability. Moreover, a symmetric FSC based on the DMSO-P4P6 fiber exhibits a high energy density of 42.4 Wh kg−1 at a power density of 302.3 W kg−1.Graphical abstractPEDOT: PSS/PANi fibers are prepared via a simple technique of one-dimensional (1D) self-assembly, and the PEDOT: PSS/PANi fiber exhibits superior flexibility, electrical conductivity, and electrochemical properties.

materials science, multidisciplinary
Hierarchical 3D All-Carbon Composite Structure Modified with N-Doped Graphene Quantum Dots for High-Performance Flexible Supercapacitors

Zhen Li,Xiang Liu,Liang Wang,Fan Bu,Junjie Wei,Dengyu Pan,Minghong Wu

DOI: https://doi.org/10.1002/smll.201801498

IF: 13.3

2018-01-01

Small

Abstract:Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all-carbon electrode materials are prepared by assembling N-doped graphene quantum dots (N-GQDs) on carbonized MOF materials (cZIF-8) interweaved with carbon nanotubes (CNTs) for flexible all-solid-state supercapacitors. In this ternary electrode, cZIF-8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N-GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N-GQD@cZIF-8/CNT electrodes exhibit a high specific capacitance of 540 F g(-1) at 0.5 A g(-1) in a 1 m H2SO4 electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg(-1) with a power density of 108.7 W kg(-1). Meanwhile, three supercapacitors connected in series can power light-emitting diodes for 20 min. All-solid-state N-GQD@cZIF-8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg(-1) with a power density of 89.3 W kg(-1), while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high-performance energy storage devices via the rational design.
Design and fabrication of high performance flexible supercapacitor with polypyrrole@carbon fiber yarn electrode and redox active dopants

Xin Liu,Limin Zang,Chunliu Liang,Qifan Liu,Yan Deng,Chao Yang,Jianhui Qiu

DOI: https://doi.org/10.1016/j.synthmet.2020.116654

IF: 4

2021-01-01

Synthetic Metals

Abstract:The flexible fiber-shaped electrodes that polypyrrole (PPy) and hydroquinone (HQ) derivatives coated on the surface of carbon fiber yarn (CFY) were synthesized by a simple one-step electrosynthesis. Besides, the effects of the size and structure of the HQ derivatives on the electrochemical performance of the doped electrodes were analyzed. The study suggested that sodium lignosulfonate doped () exhibited a high specific capacitance of 245.89 F cm−3 at 0.26 A cm−3. The all-solid-state flexible fiber-shaped supercapacitor (AFFSC) based on two parallel electrodes showed a high specific capacitance of 50.08 F cm−3 and an excellent energy density of 4.45 mW h cm−3. Moreover, the AFFSC achieved prominent cyclic stability, maintaining 92.7% capacitance retention after 25,000 cycles, as well as excellent flexibility and mechanical stability which kept 89% capacitance retention after 5000 bending cycles. In addition, the AFFSC also exhibited good voltage and current scalability and potentiality in its practical application.

materials science, multidisciplinary,physics, condensed matter,polymer science
Facile Construction of Three-Dimensional Architectures of a Nanostructured Polypyrrole on Carbon Nanotube Fibers and Their Effect on Supercapacitor Performance

Sanqing Huang,Dejin Bi,Yanfei Xia,Huijuan Lin

DOI: https://doi.org/10.1021/acsaem.2c03167

IF: 6.4

2023-01-01

ACS Applied Energy Materials

Abstract:Conducting polymer and carbon nanotube hybrids have been researched intensively in recent years for electrodes of fiber-shaped supercapacitors (FSSCs) toward flexible and wearable energy storage devices. Here, three-dimensional (3D) hierarchical polypyrrole (PPy)/carbon nanotube fiber (CNTF) architectures have been prepared by a facial electrodeposition method for flexible FSSC electrodes. PPy nanoparticles, vertically aligned nanowire arrays (VANAs), and nanowire networks were synthesized on CNTFs, respectively, to construct three types of 3D architectures by controlling the electrodeposition condition of PPy. The influence of the 3D architectures of PPy/ CNTF electrodes on the performance of the assembled quasi-solid-state FSSCs has been carefully studied. The FSSCs with PPy VANAs showed a much higher specific capacitance than that with PPy nanoparticles because the hierarchical porous structure of PPy VANAs provides a higher accessibility of electrolytic ions and a higher Coulombic efficiency than that with the PPy nanowire network. The PPy VANA-/CNTF-based FSSCs displayed high flexibility, stability, and a specific capacitance of 178.14 F g-1 at 0.4 A g-1, which is much higher than that based on common PPy cauliflower-like film/CNTF electrodes (92.06 F g-1) and pure CNTF electrodes (8.48 F g-1) under the same conditions, demonstrating the great advantages of the 3D hierarchical structure.
Hierarchical Ferric-Cobalt-nickel Ternary Oxide Nanowire Arrays Supported on Graphene Fibers As High-Performance Electrodes for Flexible Asymmetric Supercapacitors

Jingxin Zhao,Chaowei Li,Qichong Zhang,Jun Zhang,Xiaona Wang,Juan Sun,Juanjuan Wang,Jixun Xie,Ziyin Lin,Zhuo Li,Weibang Lu,Conghua Lu,Yagang Yao

DOI: https://doi.org/10.1007/s12274-017-1795-9

IF: 9.9

2018-01-01

Nano Research

Abstract:Fiber-based supercapacitors (FSCs) are new members of the energy storage family. They present excellent flexibility and have promising applications in lightweight, flexible, and wearable devices. One of the existing challenges of FSCs is enhancing their energy density while retaining the flexibility. We developed a facile and cost-effective method to fabricate a highly capacitive positive electrode based on hierarchical ferric-cobalt-nickel ternary oxide nanowire arrays/graphene fibers and a negative electrode based on polyaniline-derived carbon nanorods/graphene fibers. The elegant microstructures and excellent electrochemical performances of both electrodes enabled us to construct a highperformance flexible asymmetric graphene fiber-based supercapacitor device with an operating voltage of 1.4 V, a specific capacitance up to 61.58 mF·cm–2, and an energy density reaching 16.76 μW·h·cm–2. Moreover, the optimal device presents an outstanding cycling stability with 87.5% initial capacitance retention after 8,000 cycles, and an excellent flexibility with a capacitance retention of 90.9% after 4,000 cycles of repetitive bending.
Polypyrrole/Organic Sulfonic Acid Coated Activated Carbon Fiber Felt as Flexible Supercapacitor with High-performance

Huiyu Yang,Jie Xu,Lisha Zhai,Xin Liu,Bo Deng,Weilin Xu

DOI: https://doi.org/10.1007/s12221-021-0920-2

IF: 2.5

2021-04-26

Fibers and Polymers

Abstract:Polypyrrole (PPy) was deposited onto carbon fiber felt (CFF) by in-situ polymerization to prepare CFF/PPy composite textile as free-standing and flexible electrode for supercapacitor. Electrochemical performance was characterized by cyclic voltammetry (CV), electrochemical impedance (EIS) and constant current charge-discharge technology. The results show that the doping of organic sulfonic acid further improved the electrochemical performance of electrode materials. Areal capacitance, energy density and power density of the CFF/PPy/TsOH are as high as 5943 mF·cm−2, 1739 µWh·cm−2, 1450 µW·cm−2, respectively (at a current density of 0.8 mA·cm−2). Overall, this flexible textile electrode is promising to be used as wearable electronic device.

materials science, textiles,polymer science
Spherical polypyrrole nanoparticles growing on the reduced graphene oxide-coated carbon cloth for high performance and flexible all-solid-state supercapacitors

Zhonghui Chen,Wanfeng Liao,Xiuyuan Ni

DOI: https://doi.org/10.1016/j.cej.2017.06.098

IF: 15.1

2017-01-01

Chemical Engineering Journal

Abstract:A binder-free electrode based on spherical polypyrrole (PPy) nanoparticles growing on the reduced graphene oxide (RGO)-coated carbon cloth (CC) was fabricated and demonstrated its implementation for flexible all-solid-state supercapacitors (FSSCs). Graphene oxide (GO) was first coated on CC substrate by a facile dip-coating method, and then spherical PPy nanoparticles were grown on its surface and interior. The GO-coated CC provided an interconnected network for the growth of spherical PPy nanoparticles due to the good interfacial compatibility between GO and PPy. And the GO in the composite electrode was then reduced to obtain CC@RGO/PPy flexible electrodes. The as-prepared CC@RGO/PPy FSSCs exhibited better electrochemical performance than CC/PPy FSSCs. Furthermore, the flexible electrodes with uniform microstructures, large specific surface area and fine pore structure could be optimized and obtained through a dropwise adding method. The optimized CC@RGO/PPy FSSCs exhibited enhanced areal capacitance of 985 mF cm(-2) at 2 mA cm(-2), energy density of 1.10 mWh cm(-3) at the power density of 0.01 W cm(-3) and good flexibility under bending condition. And the excellent electrochemical performance could be ascribed to the ingenious design and optimized structure of electrodes. The highperformance FSSCs have potential and promising application in the new generation of electronic devices. (C) 2017 Elsevier B.V. All rights reserved.
Three-dimensional heterostructured polypyrrole/nickel molybdate anchored on carbon cloth for high-performance flexible supercapacitors

Di Zhu,Xun Sun,Jing Yu,Qi Liu,Jingyuan Liu,Rongrong Chen,Hongsen Zhang,Dalei Song,Rumin Li,Jun Wang

DOI: https://doi.org/10.1016/j.jcis.2020.04.039

IF: 9.9

2020-08-01

Journal of Colloid and Interface Science

Abstract:The urgent demands of energy storage for wearable electronics necessitates the development of flexible supercapacitors (FSCs). However, the service environment of portable/wearable devices requires supercapacitors to possess excellent mechanical properties to withstand harsh straining conditions, such as bending, rolling, and twisting. Hence, to develop a high-performance flexible supercapacitor (FSC) that possesses both superior electrochemical properties and remarkable mechanical capacities is still a formidable challenge. In this paper, we successfully fabricate a 3D heterostructured electrode with bulge structured polypyrrole (PPy) wrapped NiMoO4 nanowires on carbon cloth (CC). Benefiting from the 3D heterostructure and the synergistic effect between NiMoO4 and PPy, the PPy/NiMoO4/CC electrode shows a high areal capacitance of 3.4 F cm-2 and cyclic stability (94% capacitance retention). Moreover, the assembled PPy/NiMoO4/ CC//activated carbon (AC)/CC device exhibits a high energy density (0.5 mW cm-2 at a power density of 3.7 mWh cm-2). Furthermore, the CV curves of PPy/NiMoO4/CC//AC/CC show no obvious change under miscellaneous deformation conditions, indicating good flexibility. This work demonstrates that the assembled PPy/NiMoO4/CC//AC/CC FSC possesses notable electrochemical properties and exhibits great potential for application in future wearable energy-storage devices.

chemistry, physical
Enhancing energy storage capacity of supercapacitors via constructing a porous PPy/carbon cloth electrode by a template-assisted method

Shihao Wang,Xinling Yu,Nian Li,Shudong Zhang,Cui Liu,Min Xi,Obaid Iqbal,Sarmad Ali,Zhenyang Wang

DOI: https://doi.org/10.1016/j.est.2023.108312

IF: 9.4

2023-11-01

Journal of Energy Storage

Abstract:Constructing a reasonable electrode structure to achieve high energy density, long cycle life, and excellent rate performance for supercapacitors through simple and mild preparation methods remains challenging. In this work, the hierarchical porous polypyrrole (PPy) with high pseudocapacitive activity and sufficient electrolyte ion transport channels is uniformly coated on carbon cloth (CC) fibers by an electrochemical deposition method with the help of nano-silica as the self-sacrificing template to construct the CC@PPy composite with an improved surface area and porosity. By optimizing the loading and porosity of the electroactive material through electrodeposition time, the specific capacitance of the CC@PPy electrode reached an impressive value of 670.2 F g−1. The as-fabricated asymmetric solid-state supercapacitor (ASSC) built with the optimized 3D porous CC@PPy electrode exhibited a specific capacitance of up to 142.5 F g−1 at 1.0 A g−1, superior rate capability, and outstanding cyclic stability (capacitance retention up to 90.3 % after 10,000 cycles). Furthermore, the ASSC achieved a high energy density of 64.1 Wh kg−1 at a power density of 900.0 W kg−1. These results offer valuable guidance for the design and preparation of high-performance flexible electric energy storage devices.

energy & fuels
A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

Sijie Wang,Wen Chen,Xinyue Huang,Xuezheng Chen,De Li,Feng Yu,Yong Chen

DOI: https://doi.org/10.3390/ma16196476

IF: 3.4

2023-09-30

Materials

Abstract:As a kind of energy storage device, a flexible supercapacitor has the characteristics of high capacity, fast charge/discharge rate, good stability, portability and softness. Conductive polymer polypyrrole (PPy) can be used as an electrode material for supercapacitors due to its environmental friendliness, simple synthesis process, good conductivity and potential for large-scale production. However, pristine PPy inevitably suffers from structural rupture due to repeated doping/de-doping during charge and discharge processes, which in turn impairs its cycle stability. In general, compounding with flexible substrates like soft carbon materials, cellulose or nylon fabric, is a good strategy to weaken the inner stress and restrain the structure pulverization of PPy. Herein, cellulose is utilized as a soft substrate to compound with PPy based on the electrochemical oxidation of polypyrrole. The interfacial electrodeposition method can successfully obtain a smooth, uniform and flexible PPy/cellulose composite film, which shows good conductivity. The assembled symmetric supercapacitor with PPy/cellulose film has an optimized specific capacitance of 256.1 mF cm−2, even after 10,000 cycles at a current density of 1 mA cm−2. Furthermore, there is no significant capacitance loss even after 180° bending of the device. This work provides a new means to prepare flexible, low-cost, environmentally friendly and high-performance electrode materials for energy conversion and storage systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
3D Architecting triple gradient graphene-based fiber electrode for high-performance asymmetric supercapacitors

Bing Bai,Yong Wang,Jiaxin Shui,Zhiqin Su,Linlin Qiu,Pingfan Du

DOI: https://doi.org/10.1016/j.jpowsour.2024.234545

IF: 9.2

2024-05-04

Journal of Power Sources

Abstract:High-performance fibrous architectures and controllable fabrication methods for active nanomaterials are fundamental in the development of fiber-based supercapacitors (FSCs). Herein, we rationally designed a triple gradient structured fibrous electrode based on three-dimensional (3D) architectural approach with Ni 3 S 2 nanoflakes (Ni 3 S 2 NFs) in situ growth on Ni-coated graphene fiber (Ni 3 S 2 -NiGFs) for highly energy-dense asymmetric supercapacitors. Remarkably, the Ni-metal coating imparted the Ni 3 S 2 -NiGFs exceptional electrical conductivity (619.8 S cm −1 ), mechanical strength (335.0 MPa), and flexibility without significantly compromising its density. Moreover, the unique 3D interconnected ultrathin Ni 3 S 2 NFs significantly increase the contact area between the electrode and the electrolyte solution, providing abundant redox activity to facilitate ion transport and accumulation. Therefore, the fibrous electrode showcased a remarkable areal specific capacitance of 1387.6 mF cm −2 at 3 mA cm −2 in 3 M KOH aq electrolyte, while its asymmetric FSCs delivered an impressive areal energy density of 15.6 μW h cm −2 at power density of 1.0 mW cm −2 along with durable cycle life (86.7 % of the initial specific capacitance retention over 10,000 cycles). In summary, the featured work provides a facile but robust electrode design to realize highly energy-dense flexible energy storage devices for next-generation wearable industries.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Interface-engineered Molybdenum Disulfide/porous Graphene Microfiber for High Electrochemical Energy Storage

Xingjiang Wu,Hengyuan Liu,Yuhao Geng,Xueyan Liu,Guan Wu,Jianhong Xu

DOI: https://doi.org/10.1016/j.ensm.2022.10.012

IF: 20.4

2023-01-01

Energy Storage Materials

Abstract:Fiber-shaped supercapacitors (F-SCs) have received great interests in future portable electronics and wearable industries due to their high charging capacity, exceptional weavability and long lifespan. However, the stacked micro/nano-structure and poor faradaic activity of fibrous electrode that severely restrict the ion dynamic transport and redox charge storage bring obstacles of low energy density and practical applications. Herein, we report a novel F-SCs electrode made of hierarchical-ordered molybdenum disulfide/porous graphene core-shell microfiber (MoS2/PGF). The MoS2/PGF exhibits highly conductive porous core, large electroactive shell, C-Mo chemical bonds bridge and interface-engineered structure, creating smooth channels and exposed surface for boosting ion kinetics and faradic charge transfer. Significantly, the MoS2/PGF presents high capacitance of 1093 mF cm-2 and steady cycling property in H3PO4 aqueous solution. Moreover, the MoS2/PGF assembled solid-state F-SCs show large energy density of 85.4 mu Wh cm-2, temperature-dependent stability and good bending capa-bility. Given those outstanding advantages, the F-SCs can be integrated into flexible substrates to power wearable electronic devices, which will remarkably contribute to the development of new energy technology and carbon neutrality fields.

Images of victory

Constructing a Hierarchical Ternary Hybrid of PEDOT:PSS/rGO/MoS2 As an Efficient Electrode for a Flexible Fiber-Shaped Supercapacitor

Construction of hierarchical polypyrrole coated copper-catecholate grown on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) fibers for high-performance supercapacitors

Core-shell structured carbon nanofibers yarn@polypyrrole@graphene for high performance all-solid-state fiber supercapacitors

Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Sewable high-performance poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/layered double hydroxide core-shell fiber electrodes for flexible supercapacitors

Fabrication of PEDOT:PSS/rGO fibers with high flexibility and electrochemical performance for supercapacitors

Coaxial core-sheath shaped supercapacitor based on polypyrrole functionalized graphene/carbon nanotubes hollow fibers with ultrahigh length specific capacitance and energy density for wearable electronics

Highly-conductive PEDOT:PSS hydrogel framework based hybrid fiber with high volumetric capacitance and excellent rate capability

DMSO-treated flexible PEDOT:PSS/PANi fiber electrode for high performance supercapacitors

Hierarchical 3D All-Carbon Composite Structure Modified with N-Doped Graphene Quantum Dots for High-Performance Flexible Supercapacitors

Design and fabrication of high performance flexible supercapacitor with polypyrrole@carbon fiber yarn electrode and redox active dopants

Facile Construction of Three-Dimensional Architectures of a Nanostructured Polypyrrole on Carbon Nanotube Fibers and Their Effect on Supercapacitor Performance

Hierarchical Ferric-Cobalt-nickel Ternary Oxide Nanowire Arrays Supported on Graphene Fibers As High-Performance Electrodes for Flexible Asymmetric Supercapacitors

Polypyrrole/Organic Sulfonic Acid Coated Activated Carbon Fiber Felt as Flexible Supercapacitor with High-performance

Spherical polypyrrole nanoparticles growing on the reduced graphene oxide-coated carbon cloth for high performance and flexible all-solid-state supercapacitors

Three-dimensional heterostructured polypyrrole/nickel molybdate anchored on carbon cloth for high-performance flexible supercapacitors

Enhancing energy storage capacity of supercapacitors via constructing a porous PPy/carbon cloth electrode by a template-assisted method

A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

3D Architecting triple gradient graphene-based fiber electrode for high-performance asymmetric supercapacitors

Interface-engineered Molybdenum Disulfide/porous Graphene Microfiber for High Electrochemical Energy Storage