Abstract:This work introduces the facile and scalable two-step synthesis of Ti2 Nb10 O29 (TNO)/carbon hybrid material as a promising anode for lithium-ion batteries (LIBs). The first step consisted of a mechanically induced self-sustaining reaction via ball-milling at room temperature to produce titanium niobium carbide with a Ti and Nb stoichiometric ratio of 1 to 5. The second step involved the oxidation of as-synthesized titanium niobium carbide to produce TNO. Synthetic air yielded fully oxidized TNO, while annealing in CO2 resulted in TNO/carbon hybrids. The electrochemical performance for the hybrid and non-hybrid electrodes was surveyed in a narrow potential window (1.0-2.5 V vs. Li/Li+ ) and a large potential window (0.05-2.5 V vs. Li/Li+ ). The best hybrid material displayed a specific capacity of 350 mAh g-1 at a rate of 0.01 A g-1 (144 mAh g-1 at 1 A g-1 ) in the large potential window regime. The electrochemical performance of hybrid materials was superior compared to non-hybrid materials for operation within the large potential window. Due to the advantage of carbon in hybrid material, the rate handling was faster than that of the non-hybrid one. The hybrid materials displayed robust cycling stability and maintained ca. 70 % of their initial capacities after 500 cycles. In contrast, only ca. 26 % of the initial capacity was maintained after the first 40 cycles for non-hybrid materials. We also applied our hybrid material as an anode in a full-cell lithium-ion battery by coupling it with commercial LiMn2 O4 .

Binder-Free Hybrid Titanium-Niobium Oxide/Carbon Nanofiber Mats for Lithium-Ion Battery Electrodes.

Facile synthesis of morphology-controllable NiCo<sub>2</sub>S<sub>4</sub> arrays on activated carbon textile as high-performance binder-free supercapacitor electrode

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

Binding TiO2-B nanosheets with N-doped carbon enables highly durable anodes for lithium-ion batteries

Titanium Niobium Oxide Ti2 Nb10 O29 /Carbon Hybrid Electrodes Derived by Mechanochemically Synthesized Carbide for High-Performance Lithium-Ion Batteries

Binder-free SiO2 nanotubes/carbon nanofibers mat as superior anode for lithium-ion batteries

Free-Standing and Binder-Free Sodium-Ion Electrodes Based on Carbon-Nanotube Decorated Li4ti5o12 Nanoparticles Embedded in Carbon Nanofibers

Binder-Free Nitrogen-Doped Carbon Nanotubes Electrodes for Lithium-Oxygen Batteries

TiNb O2+2.5 (x=2, 5, 6)/C hybrid nanotubes with enhanced kinetics for high-performance lithium anodes

Binder-free Carbon Fiber/tinb2o7 Composite Electrode As Superior High-Rate Anode for Lithium Ions Batteries

Li-Ion Batteries with a Binder-Free Cathode of Carbon Nanotubes-LiFePO4-Al Foam

Highly uniform TiO2/SnO2/carbon hybrid nanofibers with greatly enhanced lithium storage performance

Free-Standing, Binder-Free Titania/Super-Aligned Carbon Nanotube Anodes for Flexible and Fast-Charging Li-Ion Batteries

Synthesis Of Uniform Tio2@Carbon Composite Nanofibers As Anode For Lithium Ion Batteries With Enhanced Electrochemical Performance

Carbon-coated Silicon Nanotube Arrays on Carbon Cloth As a Hybrid Anode for Lithium-Ion Batteries

Binder-Free CoMn2O4 Nanoflower Particles/Graphene/Carbon Nanotube Composite Film for a High-Performance Lithium-Ion Battery

A binder-free web-like silicon-carbon nanofiber-graphene hybrid membrane for use as the anode of a lithium-ion battery

Nanochannel-confined Synthesis of Nb2O5/CNTs Nanopeapods for Ultrastable Lithium Storage

Bio-inspired Sandwich-Structured Carbon/silicon/titanium-Oxide Nanofibers Composite As an Anode Material for Lithium-Ion Batteries

Free-standing and Bendable Carbon Nanotubes/tio2 Nanofibres Composite Electrodes for Flexible Lithium Ion Batteries