Abstract:This study presents a material‐design‐processing combo for stretchable conductors and implantable devices to enhance communication between the body and external electronics. Results show improved conformability and stretchability with stable electrical performance. Electrical resistance remained below 1.5× initial resistance at 150% strain and after 10 000 fatigue cycles. Additionally, these optimized conductors are demonstrated in an animal spinal cord stimulation device. Neural implantable devices serve as electronic interfaces facilitating communication between the body and external electronic systems. These bioelectronic systems ideally possess stable electrical conductivity, flexibility, and stretchability to accommodate dynamic movements within the body. However, achieving both high electrical conductivity and mechanical compatibility remains a challenge. Effective electrical conductors tend to be rigid and stiff, leading to a substantial mechanical mismatch with bodily tissues. On the other hand, highly stretchable polymers, while mechanically compatible, often suffer from limited compatibility with lithography techniques and reduced electrical stability. Therefore, there exists a pressing need to develop electromechanically stable neural interfaces that enable precise communication with biological tissues. In this study, a polymer that is softening, flexible, conformal, and compatible with lithography to microfabricate perforated thin‐film architectures is utilized. These architectures offer stretchability and improved mechanical compatibility. Three distinct geometries are evaluated both mechanically and electrically under in vitro conditions that simulate physiological environments. Notably, the Peano structure demonstrates minimal changes in resistance, varying less than 1.5× even when subjected to ≈150% strain. Furthermore, devices exhibit a maximum mechanical elongation before fracture, reaching 220%. Finally, the application of multi‐electrode spinal cord leads employing titanium nitride for neural stimulation in rat models is demonstrated.

Stretchable Surface Electrode Arrays Using an Alginate/PEDOT:PSS-Based Conductive Hydrogel for Conformal Brain Interfacing

Scaled Elastic Hydrogel Interfaces for Brain Electrophysiology

Soft, conformal PDMS-based ECoG electrode array for long-term in vivo applications

Engineering Electrodes with Robust Conducting Hydrogel Coating for Neural Recording and Modulation

Printed Stretchable Liquid Metal Electrode Arrays for In Vivo Neural Recording

High-Density, Actively Multiplexed μECoG Array on Reinforced Silicone Substrate

Elastic 3D Microelectrodes with Jellyfish-Like Microbumps and Grapping Strips As a Reliable Neural Interface

Triple‐network‐based conductive polymer hydrogel for soft and elastic bioelectronic interfaces

Design of a Supersoft, Ultra-Stretchable, and 3D Printable Hydrogel Electrical Bioadhesive Interface for Electromyography Monitoring

A Polyimide-Based 3-D Ultrathin Bioelectrode with Elastic Sites for Neural Recording

Viscoelastic surface electrode arrays to interface with viscoelastic tissues

In Vivo Chronic Brain Cortex Signal Recording Based on a Soft Conductive Hydrogel Biointerface

Engineering Electrodes with Robust Conducting Hydrogel Coating for Neural Recording and Modulation (Adv. Mater. 3/2023)

Soft, Conductive, Brain-Like, Coatings at Tips of Microelectrodes Improve Electrical Stability under Chronic, In Vivo Conditions

Flexible Thin‐Film Neural Electrodes with Improved Conformability for ECoG Measurements and Electrical Stimulation

Flexible ECoG electrode for implantation and neural signal recording applications

Bioresorbable Electrode Array for Electrophysiological and Pressure Signal Recording in the Brain.

Softening, Conformable, and Stretchable Conductors for Implantable Bioelectronics Interfaces

High-Density Stretchable Electrode Grids for Chronic Neural Recording

Tissue-like Electrophysiological Electrode Interface Construction by Multiple Crosslinked Polysaccharide-Based Hydrogel

Thermal Release Transfer Printing for Stretchable Conformal Bioelectronics.