Moxifloxacin versus polymyxin B/trimethoprim sulfate in pediatric bacterial conjunctivitis.

R. Wagner

DOI: https://doi.org/10.3928/01913913-20081101-04

2008-11-01

Abstract:

What problem does this paper attempt to address?

Distributed Robust Bayesian Filtering for State Estimation.

Junhao Hua,Chunguang Li

DOI: https://doi.org/10.1109/tsipn.2018.2889579

2019-01-01

IEEE Transactions on Signal and Information Processing over Networks

Abstract:We study the problem of distributed filtering for state space models over networks, which aims to collaboratively estimate the states by a network of nodes. Most of existing works on this problem assume that both process and measurement noises are Gaussian and their covariances are known in advance. In some cases, this assumption breaks down and no longer holds. In this paper, we consider the case that both process and measurement noise covariances are unknown. A few related works have studied this problem. However, these works consider the situation of centralized processing, and they only derive smoothers which are not suitable for online processing in a network. Instead, this paper presents a novel robust Bayesian filter with unknown process and measurement noise covariances over sensor networks, which is distributed and online. A novel Bayesian model is formulated for a modified state space model. This Bayesian model is capable of dealing with outliers and heavy-tailed noises and improving the robustness of the filter to these non-Gaussian noises. Using this model, we first propose a novel centralized algorithm for the robust Bayesian filtering based on variational Bayesian methods. Then, we extend it to the distributed scenario based on the alternating direction method of multipliers (ADMM) technique. The proposed algorithm can simultaneously estimate the states and process/measurement noise covariances. Simulations on a target tracking problem are given to verify the effectiveness of the proposed model and algorithm. The results demonstrate that the proposed algorithm performs much better than the standard Kalman filter and as good as the corresponding centralized algorithm in the presence of outliers.
Distributed Bernoulli Filter Based on Weighted Conservative Fusion

Litao Zheng,Feng Yang,Lihong Shi

DOI: https://doi.org/10.1109/lsp.2024.3353045

2024-03-06

IEEE Signal Processing Letters

Abstract:This letter presents a novel distributed Bernoulli filter for tracking a target over a peer-to-peer sensor network. For the case where the Bernoulli random finite set is either empty or singleton, two types of fusion weights are designed based on the information of sensor capabilities and environmental factors. Further, novel weighted conservative fusion approaches including geometric average and arithmetic average are derived to fuse local Bernoulli densities. The Gaussian mixture implementations of the proposed algorithms are given, which are subsequently combined with distributed flooding protocol for distributed averaging. Simulation results demonstrate the outperformance of the proposed approaches compared to the state-of-the-art approaches.

engineering, electrical & electronic
Computationally Efficient Distributed Multi-sensor Fusion with Multi-Bernoulli Filter

Wei Yi,Suqi Li,Bailu Wang,Reza Hoseinnezhad,Lingjiang Kong

DOI: https://doi.org/10.1109/TSP.2019.2957638

2019-06-19

Abstract:This paper proposes a computationally efficient algorithm for distributed fusion in a sensor network in which multi-Bernoulli (MB) filters are locally running in every sensor node for multi-target tracking. The generalized Covariance Intersection (GCI) fusion rule is employed to fuse multiple MB random finite set densities. The fused density comprises a set of fusion hypotheses that grow exponentially with the number of Bernoulli components. Thus, GCI fusion with MB filters can become computationally intractable in practical applications that involve tracking of even a moderate number of objects. In order to accelerate the multi-sensor fusion procedure, we derive a theoretically sound approximation to the fused density. The number of fusion hypotheses in the resulting density is significantly smaller than the original fused density. It also has a parallelizable structure that allows multiple clusters of Bernoulli components to be fused independently. By carefully clustering Bernoulli components into isolated clusters using the GCI divergence as the distance metric, we propose an alternative to build exactly the approximated density without exhaustively computing all the fusion hypotheses. The combination of the proposed approximation technique and the fast clustering algorithm can enable a novel and fast GCIMB fusion implementation. Our analysis shows that the proposed fusion method can dramatically reduce the computational and memory requirements with small bounded L1-error. The Gaussian mixture implementation of the proposed method is also presented. In various numerical experiments, including a challenging scenario with up to forty objects, the efficacy of the proposed fusion method is demonstrated.

Systems and Control
Distributed Fusion with Multi-Bernoulli Filter based on Generalized Covariance Intersection

Bailu Wang,Wei Yi,Reza Hoseinnezhad,Suqi Li,Lingjiang Kong,Xiaobo Yang

DOI: https://doi.org/10.1109/TSP.2016.2617825

2016-12-05

Abstract:In this paper, we propose a distributed multi-object tracking algorithm through the use of multi-Bernoulli (MB) filter based on generalized Covariance Intersection (G-CI). Our analyses show that the G-CI fusion with two MB posterior distributions does not admit an accurate closed-form expression. To solve this challenging problem, we firstly approximate the fused posterior as the unlabeled version of $\delta$-generalized labeled multi-Bernoulli ($\delta$-GLMB) distribution, referred to as generalized multi-Bernoulli (GMB) distribution. Then, to allow the subsequent fusion with another multi-Bernoulli posterior distribution, e.g., fusion with a third sensor node in the sensor network, or fusion in the feedback working mode, we further approximate the fused GMB posterior distribution as an MB distribution which matches its first-order statistical moment. The proposed fusion algorithm is implemented using sequential Monte Carlo technique and its performance is highlighted by numerical results.

Systems and Control
An Efficient Implementation Method for Distributed Fusion in Sensor Networks Based on CPHD Filters

Liu Wang,Guifen Chen

DOI: https://doi.org/10.3390/s24010117

2023-12-25

Abstract:A highly efficient implementation method for distributed fusion in sensor networks based on CPHD filters is proposed to address the issues of unknown cross-covariance fusion estimation and long fusion times in multi-sensor distributed fusion. This method can effectively and efficiently fuse multi-node information in multi-target tracking applications. Discrete gamma cardinalized probability hypothesis density (DG-CPHD) can effectively reduce the computational burden while ensuring computational accuracy similar to that of CPHD filters. Parallel inverse covariance intersection (PICI) can effectively avoid solving high-dimensional weight coefficient convex optimization problems, reduce the computational burden, and efficiently implement filtering fusion strategies. The effectiveness of the algorithm is demonstrated through simulation results, which indicate that PICI-GM-DG-CPHD can substantially reduce the computational time compared to other algorithms and is more suitable for distributed sensor fusion.
Optimal Distributed Finite-Time Fusion Method for Multi-Sensor Networks under Dynamic Communication Weight

Hang Yu,Keren Dai,Qingyu Li,Haojie Li,He Zhang

DOI: https://doi.org/10.3390/s23177397

IF: 3.9

2023-08-25

Sensors

Abstract:Aiming at the problem of distributed state estimation in sensor networks, a novel optimal distributed finite-time fusion filtering method based on dynamic communication weights has been developed. To tackle the fusion errors caused by incomplete node information in distributed sensor networks, the concept of limited iterations of global information aggregation was introduced, namely, fast finite-time convergence techniques. Firstly, a local filtering algorithm architecture was constructed to achieve fusion error convergence within a limited number of iterations. The maximum number of iterations was derived to be the diameter of the communication topology graph in the sensor network. Based on this, the matrix weight fusion was used to combine the local filtering results, thereby achieving optimal estimation in terms of minimum variance. Next, by introducing the generalized information quality (GIQ) calculation method and associating it with the local fusion result bias, the relative communication weights were obtained and embedded in the fusion algorithm. Finally, the effectiveness and feasibility of the proposed algorithm were validated through numerical simulations and experimental tests.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Consistent fusion method with uncertainty elimination for distributed multi-sensor systems

Peng Wang,Hongbing Ji,Long Liu

DOI: https://doi.org/10.1016/j.ins.2022.03.011

IF: 8.1

2022-05-01

Information Sciences

Abstract:In this study, the elimination of correlated errors with an unknown correlation in distributed fusion is investigated, and a consistent fusion method for distributed multi-sensor systems is proposed. Unlike most existing fusion methods, the proposed method guarantees the consistency of fusion results without requiring system model parameters or adopting conservative strategies. First, a universal bijection is used to quantify the uncertainty in the estimates to be fused based on the entropy of the independent scalars. Second, the correlated errors caused by unknown mutual information and common process noise are treated as avoidable uncertainties. The avoidable uncertainty is then estimated by using a similarity function based on the Kullback–Leibler divergence. Finally, the avoidable uncertainty is separated from the fusion results by employing a conditional probability model to avoid correlated errors. This method is proven to be unbiased, consistent, and more accurate than the well-known covariance intersection method and the inverse covariance intersection method. The simulation results further verify the superiority of the proposed method in terms of the consistency, accuracy, and ability to limit cumulative errors in sequential fusion processes.

computer science, information systems
Stochastic Event-Based Distributed Fusion Estimation Over Sensor Networks With Fading Channel

Xiaoyuan Zheng,Hao Zhang,Zhuping Wang,Chao Huang,Huaicheng Yan

DOI: https://doi.org/10.1109/tcsi.2021.3139596

2022-04-01

Abstract:The problem of the stochastic event-based distributed fusion estimation for a class of Gaussian systems is investigated. Considering the deterministic event-triggers destroying the Gaussian property of system states, the stochastic event-triggered mechanisms (SETMs) are used, which also can relieve the network transmission burden. Under the stochastic transmission schedules, a two-step fusion estimation method is developed. The first step, with the consideration of channel fading, the local estimation of each sensor is proposed by using the measurements from itself and its neighbors. The second step, the fusion algorithm is designed to eliminate the disagreements among local estimations of each sensor. Finally, experiment is carried out to demonstrate the advantages of the proposed distributed fusion estimation.
Globally optimal sequential and distributed fusion state estimation for multi-sensor systems with cross-correlated noises

Honglei Lin,Shuli Sun

DOI: https://doi.org/10.1016/j.automatica.2018.11.043

IF: 6.4

2019-03-01

Automatica

Abstract:This paper is concerned with globally optimal sequential and distributed fusion estimation algorithms in the linear minimum variance (LMV) sense for multi-sensor systems with cross-correlated noises, where the measurement noises from different sensors are cross-correlated with each other at the same time step and correlated with the system noise at the previous time step. First, a globally optimal sequential fusion filter is proposed by considering the estimators for measurement noises. The equivalence on estimation accuracy of the proposed sequential fusion filter and centralized fusion filter is proven. It has reduced computational cost since it avoids the measurement augmentation. Then, a distributed fusion filter is also proposed by considering the prior fusion estimator and feedback from the fusion center. Under the condition that local gain matrices are full column rank, the proposed distributed fusion filter has the same estimation accuracy as the centralized fusion filter, that is, it also has global optimality. Their equivalence on estimation accuracy is proven. Stability and steady-state properties of the proposed algorithms are analyzed. A sufficient condition for the existence of steady-state filters is given. Finally, simulation results for a target tracking system show the effectiveness of the proposed algorithms.

automation & control systems,engineering, electrical & electronic
Multisensor decentralized nonlinear fusion using adaptive cubature information filter

Binglei Guan,Xianfeng Tang

DOI: https://doi.org/10.1371/journal.pone.0241517

IF: 3.7

2020-11-05

PLoS ONE

Abstract:In nonlinear multisensor system, abrupt state changes and unknown variance of measurement noise are very common, which challenges the majority of the previously developed models for precisely known multisensor fusion techniques. In terms of this issue, an adaptive cubature information filter (CIF) is proposed by embedding strong tracking filter (STF) and variational Bayesian (VB) method, and it is extended to multi-sensor fusion under the decentralized fusion framework with feedback. Specifically, the new algorithms use an equivalent description of STF, which avoid the problem of solving Jacobian matrix during determining strong trace fading factor and solve the interdependent problem of combination of STF and VB. Meanwhile, A simple and efficient method for evaluating global fading factor is developed by introducing a parameter variable named fading vector. The analysis shows that compared with the traditional information filter, this filter can effectively reduce the data transmission from the local sensor to the fusion center and decrease the computational burden of the fusion center. Therefore, it can quickly return to the normal error range and has higher estimation accuracy in response to abrupt state changes. Finally, the performance of the developed algorithms is evaluated through a target tracking problem.
Exact and Approximate Heterogeneous Bayesian Decentralized Data Fusion

Ofer Dagan,Nisar R. Ahmed

DOI: https://doi.org/10.1109/TRO.2022.3226115

2024-01-30

Abstract:In Bayesian peer-to-peer decentralized data fusion, the underlying distributions held locally by autonomous agents are frequently assumed to be over the same set of variables (homogeneous). This requires each agent to process and communicate the full global joint distribution, and thus leads to high computation and communication costs irrespective of relevancy to specific local objectives. This work formulates and studies heterogeneous decentralized fusion problems, defined as the set of problems in which either the communicated or the processed distributions describe different, but overlapping, random states of interest that are subsets of a larger full global joint state. We exploit the conditional independence structure of such problems and provide a rigorous derivation of novel exact and approximate conditionally factorized heterogeneous fusion rules. We further develop a new version of the homogeneous Channel Filter algorithm to enable conservative heterogeneous fusion for smoothing and filtering scenarios in dynamic problems. Numerical examples show more than $99.5\%$ potential communication reduction for heterogeneous channel filter fusion, and a multi-target tracking simulation shows that these methods provide consistent estimates while remaining computationally scalable.

Robotics,Multiagent Systems,Signal Processing,Systems and Control
Partial Consensus and Conservative Fusion of Gaussian Mixtures for Distributed PHD Fusion

Tiancheng Li,Juan M Corchado,Shudong Sun

DOI: https://doi.org/10.1109/TAES.2018.2882960

2017-11-29

Abstract:We propose a novel consensus notion, called "partial consensus", for distributed GM-PHD (Gaussian mixture probability hypothesis density) fusion based on a peer-to-peer (P2P) sensor network, in which only highly-weighted posterior Gaussian components (GCs) are disseminated in the P2P communication for fusion while the insignificant GCs are not involved. The partial consensus does not only enjoy high efficiency in both network communication and local fusion computation, but also significantly reduces the affect of potential false data (clutter) to the filter, leading to increased signal-to-noise ratio at local sensors. Two "conservative" mixture reduction schemes are advocated for fusing the shared GCs in a fully distributed manner. One is given by pairwise averaging GCs between sensors based on Hungarian assignment and the other is merging close GCs based a new GM merging scheme. The proposed approaches have a close connection to the conservative fusion approaches known as covariance union and arithmetic mean density. In parallel, average consensus is sought on the cardinality distribution (namely the GM weight sum) among sensors. Simulations for tracking either a single target or multiple targets that simultaneously appear are presented based on a sensor network where each sensor operates a GM-PHD filter, in order to compare our approaches with the benchmark generalized covariance intersection approach. The results demonstrate that the partial, arithmetic average, consensus outperforms the complete, geometric average, consensus.

Systems and Control,Distributed, Parallel, and Cluster Computing,Information Theory
A Fast Distributed Variational Bayesian Filtering for Multisensor LTV System With Non-Gaussian Noise

Jiahong Li,Fang Deng,Jie Chen

DOI: https://doi.org/10.1109/TCYB.2018.2815697

Abstract:For multisensor linear time-varying system with non-Gaussian measurement noise, how to design distributed robust estimator to increase the accuracy and robustness to outliers at a relatively low computation and communication cost is a fundamental task. This paper proposes a fast distributed variational Bayesian (VB) filtering algorithm to recursively estimate the state and noise distribution over three conventional sensor networks: 1) incremental-based; 2) diffusion-based; and 3) consensus-based. To be specific, the non-Gaussian measurement noise of each sensor is modeled as Student- t distribution, and the system state and the parameters of the distribution are estimated via VB approach in each iteration step. An interaction scheme is then added to obtain the global optimal parameter by fusing the local optimal parameters over incremental, diffusion, and consensus communication topology. An efficient sensor selection criterion under these topologies based on the Cramér-Rao lower bound is proposed to reduce the communication and computation burden. Compared with the existing centralized VB filtering algorithms, the proposed algorithm in this paper can extensively increase the robustness to node or link failure at a lower computation cost with acceptable estimation performance and communication load. The theoretic results and simulation results are given to show the efficiency of our proposed algorithm.
A Least Square Approach for Distributed Sensor Fusion in Bandwidth-Constrained Sensor Networks.

Shanying Zhu,Jinming Xu,Cailian Chen,Xinping Guan

DOI: https://doi.org/10.1109/icassp.2016.7472378

2016-01-01

Abstract:In this paper, we consider a simple model of distributed sensor fusion problem in sensor networks with asymmetric links, where the common goal is linear parameter estimation. For the realistic scenario of bandwidth-constrained networks, we propose a least square approach, based on distributed quantized consensus algorithms, to compute the ideal centralized sample mean estimate. Analytical results show that the proposed approach is effective in smearing out the quantization errors, and outperforms the centralized approaches with respect to the estimation performance. Simulation results are provided to validate the analytical results.
Multisensor robust H∞ Decomposed-Composed (D-C) fusion estimation

Xuebo Jin,Youxian Sun

2006-01-01

Advances in Modelling and Analysis B

Abstract:It's very difficult to obtain the exact covariance matrix of correlated measurement noise in the practical multisensor system. This paper develops the robust filtering by decomposing the measurement system to two parts, designing filters respectively to one part of the real state and composing the two estimates to obtain the final estimate of the real state. The numerical example has shown that the robust H∞ decomposed-composed (D-C) state fusion method outperforms the general robust filter for this special kind of uncertain system.
Multi-sensor Fusion Estimation Subject to Random Sensor Failures under Binary Encoding Scheme: A Federated-Filtering-based Method

Na Li,Lei Zou,Chenxi Wang

DOI: https://doi.org/10.1088/1742-6596/2898/1/012029

2024-01-01

Journal of Physics Conference Series

Abstract:Abstract This paper explores the issue of fusion estimation in multi-sensor systems experiencing random sensor failures via a binary coding scheme (BCS). The occurrence of sensor failures is modeled using random variables with predetermined probability distributions. To avert the potential signal distortions during network-based communication, the BCS is utilized to transform the measurement signals into bit strings. A novel federated-filtering-based fusion estimation approach is developed to obtain the desired state estimates. The optimal estimator parameters are achieved by solving a pair of recursive difference equations, taking into account the impacts of bit errors and probabilistic quantization. Additionally, the ultimate boundedness of the estimation error covariance for the fusion estimates is guaranteed by a sufficient condition that we establish. Finally, the utility of the introduced fusion estimation method is illustrated through a simulation example.
Distributed Kalman Filtering for Sensor Network with Balanced Topology

Chaoyong Li,Hangning Dong,Jianqing Li,Feng Wang

DOI: https://doi.org/10.1016/j.sysconle.2019.104500

IF: 2.742

2019-01-01

Systems & Control Letters

Abstract:In this paper, we study the distributed Kalman filtering for sensor network with mild assumption on communication topology and local observability. To this end, a new peer-to-peer distributed Kalman filtering is proposed, where each sensor communicates with its connected neighbors to achieve average consensus on weighted measurements and inverse-covariance matrices. Then, a consensus strategy is introduced to reduce the error produced by embedded dynamic consensus method. In addition, the convergence and steady-state performance of the proposed algorithm are also investigated, and we prove rigorously that the biased estimates are bounded and controllable. Numerical simulations validate the theoretical contributions of this paper.
Robust fusion steady‐state filtering for multisensor networked systems with one‐step random delay, missing measurements, and uncertain‐variance multiplicative and additive white noises

Wen‐Qiang Liu,Gui‐Li Tao,Ya‐Jing Fan,Gui‐Qiang Zhang

DOI: https://doi.org/10.1002/rnc.4648

IF: 3.8973

2019-07-09

International Journal of Robust and Nonlinear Control

Abstract:<p>The robust fusion steady‐state filtering problem is investigated for a class of multisensor networked systems with mixed uncertainties including multiplicative noises, one‐step random delay, missing measurements, and uncertain noise variances, the phenomena of one‐step random delay and missing measurements occur in a random way, and are described by two Bernoulli distributed random variables with known conditional probabilities. Using a model transformation approach, which consists of augmented approach, derandomization approach, and fictitious noise approach, the original multisensor system under study is converted into a multimodel multisensor system with only uncertain noise variances. According to the minimax robust estimation principle, based on the worst‐case subsystems with conservative upper bounds of uncertain noise variances, the robust local steady‐state Kalman estimators (predictor, filter, and smoother) are presented in a unified framework. Applying the optimal fusion algorithm weighted by matrices, the robust distributed weighted state fusion steady‐state Kalman estimators are derived for the considered system. In addition, by using the proposed model transformation approach, the centralized fusion system is obtained, furthermore the robust centralized fusion steady‐state Kalman estimators are proposed. The robustness of the proposed estimators is proved by using a combination method consisting of augmented noise approach, decomposition approach of nonnegative definite matrix, matrix representation approach of quadratic form, and Lyapunov equation approach, such that for all admissible uncertainties, the actual steady‐state estimation error variances of the estimators are guaranteed to have the corresponding minimal upper bounds. The accuracy relations among the robust local and fused steady‐state Kalman estimators are proved. An example with application to autoregressive signal processing is proposed, which shows that the robust local and fusion signal estimation problems can be solved by the state estimation problems. Simulation example verifies the effectiveness and correctness of the proposed results.</p>

automation & control systems,engineering, electrical & electronic,mathematics, applied
Self-Tuning Distributed Fusion Filter for Multi-Sensor Networked Systems with Unknown Packet Receiving Rates, Noise Variances, and Model Parameters

Minhui Wang,Shuli Sun,Wang,Sun

DOI: https://doi.org/10.3390/s19204436

IF: 3.9

2019-10-13

Sensors

Abstract:In this study, we researched the problem of self-tuning (ST) distributed fusion state estimation for multi-sensor networked stochastic linear discrete-time systems with unknown packet receiving rates, noise variances (NVs), and model parameters (MPs). Packet dropouts may occur when sensor data are sent to a local processor. A Bernoulli distributed stochastic variable is adopted to depict phenomena of packet dropouts. By model transformation, the identification problem of packet receiving rates is transformed into that of unknown MPs for a new augmented system. The recursive extended least squares (RELS) algorithm is used to simultaneously identify packet receiving rates and MPs in the original system. Then, a correlation function method is used to identify unknown NVs. Further, a ST distributed fusion state filter is achieved by applying identified packet receiving rates, NVs, and MPs to the corresponding optimal estimation algorithms. It is strictly proven that ST algorithms converge to optimal algorithms under the condition that the identifiers for parameters are consistent. Two examples verify the effectiveness of the proposed algorithms.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Consistent fusion for distributed multi-rate multi-sensor linear systems with unknown correlated measurement noises

Peng WANG,Hongbing JI,Yongquan ZHANG,Zhigang ZHU

DOI: https://doi.org/10.1016/j.cja.2024.11.012

IF: 5.7

2024-11-24

Chinese Journal of Aeronautics

Abstract:This study investigates a consistent fusion algorithm for distributed multi-rate multi-sensor systems operating in feedback-memory configurations, where each sensor's sampling period is uniform and an integer multiple of the state update period. The focus is on scenarios where the correlations among Measurement Noises (MNs) from different sensors are unknown. Firstly, a non-augmented local estimator that applies to sampling cases is designed to provide unbiased Local Estimates (LEs) at the fusion points. Subsequently, a measurement-equivalent approach is then developed to parameterize the correlation structure between LEs and reformulate LEs into a unified form, thereby constraining the correlations arising from MNs to an admissible range. Simultaneously, a family of upper bounds on the joint error covariance matrix of LEs is derived based on the constrained correlations, avoiding the need to calculate the exact error cross-covariance matrix of LEs. Finally, a sequential fusion estimator is proposed in the sense of Weighted Minimum Mean Square Error (WMMSE), and it is proven to be unbiased, consistent, and more accurate than the well-known covariance intersection method. Simulation results illustrate the effectiveness of the proposed algorithm by highlighting improvements in consistency and accuracy.

engineering, aerospace

Moxifloxacin versus polymyxin B/trimethoprim sulfate in pediatric bacterial conjunctivitis.

Distributed Robust Bayesian Filtering for State Estimation.

Distributed Bernoulli Filter Based on Weighted Conservative Fusion

Computationally Efficient Distributed Multi-sensor Fusion with Multi-Bernoulli Filter

Distributed Fusion with Multi-Bernoulli Filter based on Generalized Covariance Intersection

An Efficient Implementation Method for Distributed Fusion in Sensor Networks Based on CPHD Filters

Optimal Distributed Finite-Time Fusion Method for Multi-Sensor Networks under Dynamic Communication Weight

Consistent fusion method with uncertainty elimination for distributed multi-sensor systems

Stochastic Event-Based Distributed Fusion Estimation Over Sensor Networks With Fading Channel

Globally optimal sequential and distributed fusion state estimation for multi-sensor systems with cross-correlated noises

Multisensor decentralized nonlinear fusion using adaptive cubature information filter

Exact and Approximate Heterogeneous Bayesian Decentralized Data Fusion

Partial Consensus and Conservative Fusion of Gaussian Mixtures for Distributed PHD Fusion

A Fast Distributed Variational Bayesian Filtering for Multisensor LTV System With Non-Gaussian Noise

A Least Square Approach for Distributed Sensor Fusion in Bandwidth-Constrained Sensor Networks.

Multisensor robust H∞ Decomposed-Composed (D-C) fusion estimation

Multi-sensor Fusion Estimation Subject to Random Sensor Failures under Binary Encoding Scheme: A Federated-Filtering-based Method

Distributed Kalman Filtering for Sensor Network with Balanced Topology

Robust fusion steady‐state filtering for multisensor networked systems with one‐step random delay, missing measurements, and uncertain‐variance multiplicative and additive white noises

Self-Tuning Distributed Fusion Filter for Multi-Sensor Networked Systems with Unknown Packet Receiving Rates, Noise Variances, and Model Parameters

Consistent fusion for distributed multi-rate multi-sensor linear systems with unknown correlated measurement noises