[Radioimmunoassay of human prolactin with "Daiichi kit" and its clinical application (author's transl)].

J. Su,T. Aso,K. Motohashi,K. Matsuoka,K. Horie

1981-07-01

Abstract:

What problem does this paper attempt to address?

Three-Dimensional Electrical Resistivity Tomography for Leachate Imaging Considering Thin Impermeable Layers of Landfills

Yongji Li,Yunhe Liu,Changchun Yin,Yang Su,Zhiyuan Ke,Luyuan Wang,Xiuyan Ren,Bo Zhang

DOI: https://doi.org/10.1109/tgrs.2024.3467673

IF: 8.2

2024-10-08

IEEE Transactions on Geoscience and Remote Sensing

Abstract:At present, the mainstream technology for leachate detection in landfills is electrical resistivity tomography (ERT), known for its efficiency and nondestructive nature. However, the conventional ERT data interpretation primarily uses inversion based on structured grids, which cannot accurately simulate the complex and thin impermeable layers of landfills, leading to unreliable results. To address this issue, we propose a novel ERT observation system and a new 3-D inversion technology. In our observation system, all measuring electrodes are placed around the landfill at once, and only a limited number of transmitting sources are needed to sequentially inject current, which effectively reduces the time for data acquisition. For 3-D inversions, we employ an unstructured tetrahedral grid for fine discretization of structures at various scales. The node-based finite-element method is used for high-precision forward and adjoint forward calculations, while the gradient filtering method in combination with limited-memory quasi-Newtonian (L-BFGS) algorithm is used to update the inversion model. Numerical experiments indicate that the proposed method can mitigate the influence of thin impermeable landfill layers and provide more accurate imaging results compared to the conventional methods. In addition, we also test the effects of water-bearing layers, faults, and near-surface interferences on the leakage inversion results. The results show that the proposed method can achieve reliable high-resolution imaging under various conditions, making it an effective technique for landfill leachate detection.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Application of Electrical Resistivity Tomography to Monitor the Dewatering of Vertical and Horizontal Wells in Municipal Solid Waste Landfills

Jie Hu,Xiao Wen Wu,Han Ke,Xiao Bing Xu,Ji Wu Lan,Liang Tong Zhan

DOI: https://doi.org/10.1016/j.enggeo.2019.03.021

IF: 6.902

2019-01-01

Engineering Geology

Abstract:The performance of vertical and horizontal wells is usually evaluated using water level wells or piezometers in landfills. In this study, pumping tests in vertical and horizontal wells were performed at the Changan and Tianziling landfills, respectively. During the pumping tests, the leachate level drawdown around the wells and the resistivity of the surrounding waste were both measured to investigate the feasibility of applying electrical resistivity tomography (ERT) to monitor the dewatering in landfills. It was found that the resistivity rho of the waste samples drilled from the Tianziling landfill decreased as volumetric moisture content theta increased, and the relationship could be fitted with Archie's law (rho = rho(w)a theta(-m)). For waste samples with the same theta, rho tended to increase as the depth of the samples increased. It was because the waste at deeper layers experienced longer degradation and tended to have greater proportion of inert particles like cinder and dust. During a vertical well pumping test in the Changan landfill, the resistivity of waste on the right side of the well increased by 10% to 30%. The distribution of areas where resistivity increased was heterogeneous. During two horizontal well pumping tests in the Tianziling landfill, the areas where resistivity increased were distributed in an ellipse around one well and were horizontally distributed around another well. The resistivity of waste near the two wells increased by 4% to 18%. According to the ERT testing results, the influence radii of the two wells were estimated as 38.7 m and 33.2 m, respectively. These were close to the values (i.e., 42.1 m and 34.8 m, respectively) obtained through leachate level testing results. Artifacts produced by the inversion process were both found in the ERT images of vertical and horizontal well pumping tests. The combined use of ERT with other hydrogeological monitoring methods can improve the understanding of draining effects by vertical and horizontal wells in landfills.
A Real-Time Method to Detect the Leakage Location in Urban Water Distribution Networks

Xiaoyu Ma,Yalin Li,Weiping Zhang,Xiujuan Li,Zhiman Shi,Junfeng Yu,Jiangxia Wang,Jingqing Liu

DOI: https://doi.org/10.1061/(asce)wr.1943-5452.0001628

IF: 3.457

2022-01-01

Journal of Water Resources Planning and Management

Abstract:Water distribution networks (WDNs) are prone to infrastructure failures that lead to water loss. This paper presents a practical and efficient leakage detection and localization method based on the supervisory control and data acquisition (SCADA) system combined with state estimation. In WDNs, normal node demand patterns, seasonal variations, and leakage can cause pressure sensor values to fluctuate; accordingly, the pressure sensor values in a SCADA system can be regarded as exhibiting a mixture of normal and abnormal fluctuations. To obtain the fluctuation signal arising from leakage, the node demands must first be calibrated. For leakage detection, the proposed method involves comparing the errors between historical monitored values and simulated values to assess whether a change in these errors is due to normal system changes or the impact of leakage. At the leakage location, an emitter coefficient is used to simulate unknown leakage flow. Then, similarity indicators of the leakage locations are constructed using the Euclidian distance, Pearson correlation coefficient, and Jaccard similarity. The leakage location can be determined by comparing these similarity values. The performance of this method was tested on the L-Town WDN provided in the BattLeDIM competition. Our model's ability to quickly and accurately detect and locate leakages was validated on the 2018 data set of leakage events. The model then was applied to predict the times and locations of leakages in 2019, and eight leakages were detected, six of which were true positives.
Characterizing Multi-Source Heavy Metal Contaminated Sites at the Hun River Basin: an Integrated Deep Learning and Data Assimilation Approach

Yanhao Wu,Mei Li,Haijian Xie,Yanghui Shi,Qun Li,Shaopo Deng,Shengtian Zhang

DOI: https://doi.org/10.1016/j.jhydrol.2024.132349

IF: 6.4

2024-01-01

Journal of Hydrology

Abstract:In real-world scenarios involving groundwater contamination, the environmental complexity substantially complicates the tasks of tracing pollution sources and characterizing the features of affected sites. To address these challenges, this study presents an integrated framework that combines deep learning (AR-Net-DA) with data assimilation (ES-MDA). This approach effectively traces pollution sources and characterizes site features using sparse data from complex contamination scenarios. The paper introduces a case study involving multisource heavy metal (manganese) pollution in the Hun River basin, Liaoning Province, China. A high-fidelity model for groundwater flow and solute transport was developed. Subsequently, the innovative convolutional neural network model, AR-Net-DA, was employed to replace traditional process-based groundwater models by dynamically optimizing weights in proximity to various pollution sources. This model was then integrated into the ES-MDA inversion framework to concurrently determine pollution source parameters and the spatial distribution of aquifer permeability fields. The results demonstrate that this coupled inversion framework can accurately pinpoint pollution source locations and their release histories using limited observational data, while also mapping the spatial distribution of hydraulic conductivity fields with enhanced computational efficiency. These findings have significant implications for groundwater resource management, pollution risk control, and the remediation of contaminated sites.
Multifaceted anomaly detection framework for leachate monitoring in landfills

Rong Liu,Shiyu Jiang,Jian Ou,Kouao Laurent Kouadio,Bo Xiong

DOI: https://doi.org/10.1016/j.jenvman.2024.122130

2024-08-23

Abstract:The imperative to preserve environmental resources has transcended traditional conservation efforts, becoming a crucial element for sustaining life. Our deep interconnectedness with the natural environment, which directly impacts our well-being, emphasizes this urgency. Contaminants such as leachate from landfills are increasingly threatening groundwater, a vital resource that provides drinking water for nearly half of the global population. This critical environmental threat requires advanced detection and monitoring solutions to effectively safeguard our groundwater resources. To address this pressing need, we introduce the Multifaceted Anomaly Detection Framework (MADF), which integrates Electrical Resistivity Tomography (ERT) with advanced machine learning models-Isolation Forest (IF), One-Class Support Vector Machines (OC-SVM), and Local Outlier Factor (LOF). MADF processes and analyzes ERT data, employing these hybrid machine learning models to identify and quantify anomaly signals accurately via the majority vote strategy. Applied to the Chaling landfill site in Zhuzhou, China, MADF demonstrated significant improvements in detection capability. The framework enhanced the precision of anomaly detection, evidenced by higher Youden Index values (≈ 6.216%), with a 30% increase in sensitivity and a 25% reduction in false positives compared to traditional ERT inversion methods. Indeed, these enhancements are crucial for effective environmental monitoring, where the cost of missing a leak could be catastrophic, and for reducing unnecessary interventions that can be resource-intensive. These results underscore MADF's potential as a robust tool for proactive environmental management, offering a scalable and adaptable solution for comprehensive landfill monitoring and pollution prevention across varied environmental settings.
Improving Deep Groundwater Aquifer Characterization with Deep Learning Inversion of Audio-Frequency Magnetotelluric Data

Hang Chen,Zhengyong Ren,Jianxin Liu,Zhengguang Liu,Rongwen Guo,Yongfei Wang,Dongdong He

DOI: https://doi.org/10.1016/j.jhydrol.2024.131680

IF: 6.4

2024-01-01

Journal of Hydrology

Abstract:Deep groundwater is a crucial resource for drinking, industry, and ecosystems. However, its extensive subsurface distribution poses challenges for traditional hydrological sampling methods. Audio-frequency Magnetotelluric (AMT) is commonly used to image shallow subsurface resistivity distribution, but its application for quantifying deep groundwater aquifers is challenging. In this study, we propose a two-step strategy deep learning (DL) to estimate subsurface water information from AMT data. First, we employ an inversion DL network to directly predict subsurface resistivity distribution from AMT data. To assess the impact of data and prior information on DL inversions, we progressively include more input data during training, from apparent resistivity to apparent resistivity, phase, and Bostick transformed initial models. In the second step, we use another DL network to predict subsurface structure from AMT inversion results. We then estimate water content based on unit-specific petrophysical relationships. Evaluating our algorithm with synthetic cases, we find that including more information generally improves network performance, particularly when incorporating initial Bostick transformed models. Applying the algorithm to a field hydrogeological survey, we compare the inversion network trained with apparent resistivity, phase, and Bostick transformed initial models to traditional regularization inversions. The new approach shows better consistency with borehole data. Another network extracts structure information, enabling the estimation of subsurface water content and gaining valuable hydrogeological insights. To summarize, our study presents a novel DL-based approach to quantitatively delineate deep groundwater aquifers using AMT data. The proposed algorithm demonstrates promising performance in estimating subsurface hydrologic properties, providing valuable insights for hydrogeological investigations.
Deep Learning to Estimate Permeability using Geophysical Data

M. K. Mudunuru,E. L. D. Cromwell,H. Wang,X. Chen

DOI: https://doi.org/10.1016/j.advwatres.2022.104272

2022-07-21

Abstract:Time-lapse electrical resistivity tomography (ERT) is a popular geophysical method to estimate three-dimensional (3D) permeability fields from electrical potential difference measurements. Traditional inversion and data assimilation methods are used to ingest this ERT data into hydrogeophysical models to estimate permeability. Due to ill-posedness and the curse of dimensionality, existing inversion strategies provide poor estimates and low resolution of the 3D permeability field. Recent advances in deep learning provide us with powerful algorithms to overcome this challenge. This paper presents a deep learning (DL) framework to estimate the 3D subsurface permeability from time-lapse ERT data. To test the feasibility of the proposed framework, we train DL-enabled inverse models on simulation data. Subsurface process models based on hydrogeophysics are used to generate this synthetic data for deep learning analyses. Results show that proposed weak supervised learning can capture salient spatial features in the 3D permeability field. Quantitatively, the average mean squared error (in terms of the natural log) on the strongly labeled training, validation, and test datasets is less than 0.5. The R2-score (global metric) is greater than 0.75, and the percent error in each cell (local metric) is less than 10%. Finally, an added benefit in terms of computational cost is that the proposed DL-based inverse model is at least O(104) times faster than running a forward model. Note that traditional inversion may require multiple forward model simulations (e.g., in the order of 10 to 1000), which are very expensive. This computational savings (O(105) - O(107)) makes the proposed DL-based inverse model attractive for subsurface imaging and real-time ERT monitoring applications due to fast and yet reasonably accurate estimations of the permeability field.

Geophysics,Machine Learning
Deep Learning Joint Inversion of Electrical Data for Ahead-Prospecting in Tunneling

Peng Jiang,Benchao Liu,Chuanwu Wang,Lei Chen,Yuting Tang

DOI: https://doi.org/10.1155/2023/5639207

IF: 1.843

2023-03-17

Advances in Civil Engineering

Abstract:Water inrush has become one of the bottlenecks restricting tunnel construction. Among various advanced forecasting techniques, the direct current method is more cost-effective and sensitive to water-bearing structures. It has been widely used in exploring water inrush disasters in practical engineering. Although traditional resistivity linear inversion methods are reasonably practical, they usually suffer from volume effects and cannot accurately locate the location and morphology of water-bearing bodies. Therefore, nonlinear techniques such as deep learning have recently become popular to directly approximate the inversion function by learning the mapping of apparent resistivity data to the geoelectric model. This work presents a novel deep learning-based electrical approach that combines resistivity and polarizability to estimate water-bearing location and morphology. Specifically, we design an encoder-decoder network. A shared encoder extracts features from the input data, two encoders output resistivity, and polarizability models, respectively, and fine-tuned collinear regularization for both outputs reduces solutions' multiplicity. Compared with traditional linear inversion methods and independent parameter inversion, our proposed joint inversion method shows superiority in locating and delineating anomalous bodies.

construction & building technology,engineering, civil
Improving efficiency and accuracy of levee hazard detection with deep learning

Xiang Zhao,Hongbing Zhang,Ping Wang,Quan Ren,Dailu Zhang

DOI: https://doi.org/10.1016/j.cageo.2024.105593

IF: 5.168

2024-04-11

Computers & Geosciences

Abstract:This paper presents a model framework based on a deep learning algorithm using Faster R-CNN to improve the accuracy and efficiency of detecting long-distance levee hazards. The proposed method aims to assist technicians in identifying hazards in resistivity inversion profiles, thereby reducing the manual workload and extracting valuable information from a large volume of data using deep learning techniques. To this end, we constructed a dataset of levee hazards using inversion images of electrical resistivity imaging data obtained from numerical simulations, indoor experiments, and actual levee hazards. Subsequently, we utilized image augmentation techniques to expand the dataset and enhance the model's performance, resulting in a total of 2000 labeled hazard images. The network was then trained from scratch by setting the hyperparameters. the trained weight parameters and network architecture were saved for future use. The model's performance was evaluated using standard evaluation metrics, including precision, recall, F1 score, and average precision (AP). The proposed model demonstrated robustness and adaptability, achieving high precision and accuracy with an AP value of up to 100%. Furthermore, we validated the method using three cases, and the results indicated its superiority over traditional manual identification-based or outlier analysis detection of levee hazards in practical scenarios. This study emphasizes the significant advantages of deep learning techniques over the traditional methods, including improved accuracy, automation, speed, and scalability. It suggests that intelligent detection based on deep learning can accurately identify and locate hazards in levees.

geosciences, multidisciplinary,computer science, interdisciplinary applications
LMDFusion: A lightweight infrared and visible image fusion network for substation equipment based on mask and residual dense connection

Hao Chi,Delin Luo,Song Wang

DOI: https://doi.org/10.1016/j.infrared.2024.105218

IF: 2.997

2024-02-08

Infrared Physics & Technology

Abstract:Lightweight infrared and visible image fusion is a challenge problem for image-based fault detection. In this paper, a lightweight infrared and visible image fusion network is proposed based on mask and residual dense connection called LMDFusion. In this method, the loss function is designed by utilizing image masks to assist the training of the network, and the residual dense connection is used to better preserve the deep features of each convolutional layer to make the generated fusion image well retain the thermal radiation target and background texture structure from source image. Additionally, depthwise separable convolution is used to replace standard convolution to make our model more lightweight and suitable for deployment on mobile compared to most advanced fusion models. Although the purpose of our research is mainly for image fusion of electrical substation equipment, it still performs well in other public infrared and visible datasets. Experimental results on different datasets indicate that the proposed method exhibits outstanding performance in terms of subjective visual evaluation and objective evaluation metrics such as entropy (EN), standard deviation (SD), mutual information (MI) and pixel-based visual information fidelity (VIFP).

optics,physics, applied,instruments & instrumentation
The Application of Three-Dimensional High-Density Electrical Method in Detecting Vertical HDPE Membranes at Landfill Sites

Chenglong Sun,Changxin Nai,Yuan Li,Jingcai Liu,F.K. Yuen,A.-S. Nizami,J. Wen

DOI: https://doi.org/10.1051/e3sconf/202453603026

2024-06-11

E3S Web of Conferences

Abstract:Landfilling is one of the important methods in hazardous waste treatment. In order to prevent the landfill leachate from connecting with external groundwater and prevent leachate from flowing into external polluted water bodies and soil, vertical anti-seepage membranes will be installed along the perimeter of the reservoir area. Given the structural characteristics of vertical HDPE membranes and site conditions, this study proposes the application of three-dimensional high-density electrical resistivity (3D-HDER) tomography for the detection of these membranes. Compared with the traditional resistivity method, the high-density resistivity method can realize automatic switching of electrode device type, electrode spacing and measuring points during the measurement process, thereby improving detection accuracy and work efficiency. By employing 3D-HDER for data collection on vertical HDPE membranes and inverting the subsurface resistivity distribution, the presence of leaks can be inferred based on the distribution of low-resistivity anomalies in the target underground area, thereby facilitating the integrity assessment of the vertical HDPE membranes. This research was applied in a practical investigation at a municipal landfill site in Hunan Province, where field tests were conducted, and the effectiveness of 3D-HDER in detecting vertical HDPE membranes was validated through excavation. The experimental results indicate that: (1) 3DHDER is capable of effectively and accurately locating shallow leaks, and (2) low resistivity anomalies were observed in the vicinity of the leaks.
Self-potential Inversion Based on Attention U-Net Deep Learning Network

You-jun Guo,Yi-an Cui,Hang Chen,Jing Xie,Chi Zhang,Jian-xin Liu

DOI: https://doi.org/10.1007/s11771-024-5755-8

2024-01-01

Journal of Central South University

Abstract:Landfill leaks pose a serious threat to environmental health, risking the contamination of both groundwater and soil resources. Accurate investigation of these sites is essential for implementing effective prevention and control measures. The self-potential (SP) stands out for its sensitivity to contamination plumes, offering a solution for monitoring and detecting the movement and seepage of subsurface pollutants. However, traditional SP inversion techniques heavily rely on precise subsurface resistivity information. In this study, we propose the Attention U-Net deep learning network for rapid SP inversion. By incorporating an attention mechanism, this algorithm effectively learns the relationship between array-style SP data and the location and extent of subsurface contaminated sources. We designed a synthetic landfill model with a heterogeneous resistivity structure to assess the performance of Attention U-Net deep learning network. Additionally, we conducted further validation using a laboratory model to assess its practical applicability. The results demonstrate that the algorithm is not solely dependent on resistivity information, enabling effective locating of the source distribution, even in models with intricate subsurface structures. Our work provides a promising tool for SP data processing, enhancing the applicability of this method in the field of near-subsurface environmental monitoring.
Water source identification in mines combining LIF technology and ResNet

Peng-cheng Yan,Yu-ting Zhao,Guo-dong Li,Jing-bao Wang,Wen-chang Wang

DOI: https://doi.org/10.1007/s11629-023-8189-0

IF: 2.371

2023-11-30

Journal of Mountain Science

Abstract:The problem of mine water source has always been an important hidden danger in mine safety production. The water source under the mine working face may lead to geological disasters, such as mine collapse and water disaster. The research background of mine water source identification involves many fields such as mining production, environmental protection, resource utilization and technological progress. It is a comprehensive and interdisciplinary subject, which helps to improve the safety and sustainability of mine production. Therefore, timely and accurate identification and control of mine water source is very important to ensure mine production safety. Laser-Induced Fluorescence (LIF) technology, characterized by high sensitivity, specificity, and spatial resolution, overcomes the time-consuming nature of traditional chemical methods. In this experiment, sandstone water and old air water were collected from the Huainan mining area as original samples. Five types of mixed water samples were prepared by varying their proportions, in addition to the two original water samples, resulting in a total of seven different water samples for testing. Four preprocessing methods, namely, MinMaxScaler, StandardScaler, Standard Normal Variate (SNV) transformation, and Centering Transformation (CT), were applied to preprocess the original spectral data to reduce noise and interference. CT was determined as the optimal preprocessing method based on class discrimination, data distribution, and data range. To maintain the original data features while reducing the data dimension, including the original spectral data, five sets of data were subjected to Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) dimensionality reduction. Through comparing the clustering effect and Fisher's ratio of the first three dimensions, PCA was identified as the optimal dimensionality reduction method. Finally, two neural network models, CT+PCA+CNN and CT+PCA+ResNet, were constructed by combining Convolutional Neural Networks (CNN) and Residual Neural Networks (ResNet), respectively. When selecting the neural network models, the training time, number of iterative parameters, accuracy, and cross-entropy loss function in the classification problem were compared to determine the model best suited for water source data. The results indicated that CT+PCA+ResNet was the optimal approach for water source identification in this study.

environmental sciences
Fuzzy deep wavelet neural network with hybrid learning algorithm: Application to electrical resistivity imaging inversion

Li Dong,Feibo Jiang,Minjie Wang,Xiaolong Li

DOI: https://doi.org/10.1016/j.knosys.2022.108164

2022-04-01

Abstract:Electrical resistivity imaging (ERI) is a non-invasive imaging technique for measuring resistivity, and the inversion problem of ERI is non-linear and non-convex. Traditional fuzzy neural network based on gradient descent is known to be inept for its low accuracy and does not ensure global convergence. In order to solve above problems, we present a fuzzy deep wavelet neural network (FDWNN) inversion method trained by an accelerated hybrid learning algorithm to invert resistivity data of ERI. Firstly, a novel FDWNN model, which integrates the fuzzy clustering-based premise part with the deep WNN-based consequent part, is applied to improve the prediction accuracy and enhance the interpretability of ERI inversion. Secondly, an adaptive shuffled frog leaping algorithm (ASFLA) is introduced to balance the exploration and exploitation during the search process intelligently. In the proposed ASFLA, an adaptive mutation rule is applied to improve the local search and a differential leaping strategy is presented to enhance the global search. Finally, an accelerated hybrid learning algorithm integrating the ASFLA and a weight decay backpropagation (wdBP) method is designed, which keeps the advantages of the SFLA in finding global optimal values, while speeds up the convergence and improves the generalization through wdBP simultaneously. Moreover, five experiments are introduced to evaluate the feasibility and applicability of the FDWNN algorithm by comparison with other contenders.

computer science, artificial intelligence
Coupled Hydrogeophysical Inversion of DNAPL Source Zone Architecture and Permeability Field in a 3D Heterogeneous Sandbox by Assimilation Time-Lapse Cross-Borehole Electrical Resistivity Data Via Ensemble Kalman Filtering

Xueyuan Kang,Xiaoqing Shi,Yaping Deng,Andre Revil,Hongxia Xu,Jichun Wu

DOI: https://doi.org/10.1016/j.jhydrol.2018.10.019

IF: 6.4

2018-01-01

Journal of Hydrology

Abstract:Characterization of dense non-aqueous phase liquid (DNAPL) distribution is important to facilitate the decision of remediation strategies. However, it is still a great challenge to characterize DNAPL source zone architecture with high resolution due to subsurface heterogeneity and relatively sparse data from traditional hydrogeological investigations. To overcome difficulties from such sparse data, electrical resistivity tomography (ERT) is introduced to locate DNAPL using time-lapse cross-borehole measurements. Due to the significant impact of geological heterogeneity on DNAPL source zone architecture, a data assimilation framework based on the coupled multiphase fluids-ERT model is developed to jointly invert DNAPL saturation and the permeability field using time-lapse ERT data. To validate the efficiency and performance of this framework, synthetic and laboratory experiments are both performed to monitor DNAPL migration and distribution in 3D heterogeneous sandbox with cross-borehole ERT. Result shows that time-lapse ERT and direct inversion can map the evolution of the DNAPL plume but loses details regarding the plume morphology due to the over-smoothing caused by geophysical inversion using an isotropic and homogeneous roughness-based regularization procedure. By contrast, the coupled inversion is successful to characterize both the permeability field and the evolution of the DNAPL plume with a higher resolution. This is because the coupled inversion is able to directly translate raw geophysical data into hydrologic meaningful information and therefore avoid artifacts caused by direct geophysical inversion.
Study on Resistivity Imaging of Urban Landfill Leachate Channel Using 3D Electrical Resistivity Tomography with Annular Electrode Configuration

Jiulong Cheng,Yuqi Zhang,Yifan Shen,Yao Li,Jiaxin Huang

DOI: https://doi.org/10.1088/1742-6596/2651/1/012136

2023-12-01

Journal of Physics: Conference Series

Abstract:Abstract Urban garbage landfills are distributed mostly in a nearly circular shape with complex internal and external environments. The conditions on the top of the landfills are not conducive to the layout of electrical measuring lines and electrodes, resulting in difficulties in using the conventional linear or rectangular mesh high density electrical surveying system to achieve good results for the detection of leachate channel under the garbage body. This paper proposed 3D electrical resistivity tomography (ERT) method by annular electrode configuration with electrodes placed around the landfill. Through numerical simulation and indoor physical simulation experiments, we have discussed the feasibility and effectiveness of this method for circling the pollution range and channel location of landfill leachate. The study shows that the 3D ERT method with annular electrode configuration can effectively detect the spatial location and extension of garbage leachate channel, reflect the leakage of garbage leachate in landfills, and thus provide technical support for the fine detection of garbage leachate channel.
MTL-FaultNet: Seismic data reconstruction assisted multi-task deep learning 3D fault interpretation

Weihua Wu,Yang Yang,Bangyu Wu,Debo Ma,Zhanxin Tang,Xia Yin

DOI: https://doi.org/10.1109/tgrs.2023.3299378

IF: 8.2

2023-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Seismic fault interpretation is of extraordinary significant for hydrocarbon reservoir characterization and drilling hazard mitigation. In recent years, deep learning-based seismic fault detection methods have been conducted actively. Considering efficiency and fault prediction consistency, the most appealing way is to train a 3-D segmentation network using synthetic seismic data with ground-truth fault structure. However, the differences in signal-to-noise ratio, resolution, and fault strike distribution between synthetic and real data can lead to inconsistent and unreliable prediction results. In this article, we propose a multitask deep learning-based seismic fault detection method, which takes seismic fault detection as the main task and 3-D seismic data reconstruction as the auxiliary task, named MTL-FaultNet. The auxiliary branch can provide suggestive information to the main branch, thus improving its performance. We also design two levels of multiscale modules and embedded attention mechanisms in the network, so as to improve the network’s ability to focus on multiscale fault features and learn stable fault structures. Different weights are assigned to the loss for different tasks, with large and small weights on the main and auxiliary branches, respectively. We apply the proposed method to Netherlands offshore F3 seismic data and a land field seismic data collected from Tarim Basin with mainly strike-slip faults, and Poseidon 3-D seismic data. The proposed fault detection method is experimentally demonstrated on the improved network generalization and achieves reliable fault interpretation on field seismic data.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Integrating sentinel-2a imagery, DEM data, and spectral feature analysis for landslide detection via fully convolutional networks

Sun, Lin,Shi, Xian,Ao, Zurui,Chang, Zexiu

DOI: https://doi.org/10.1007/s10346-024-02379-6

IF: 6.153

2024-10-11

Landslides

Abstract:Landslides can cause severe damage to property and human life. Identifying their locations and characteristics is crucial for emergency rescue and disaster risk assessment. However, existing methods need help in accurately detecting landslides because of their diverse characteristics and scales, as well as the differences in spectral features and spatial heterogeneity of remote sensing images. To overcome these challenges, a multiscale feature fusion landslide-detection network (MFLD-Net) is proposed. This network utilizes reflectance difference images from pre- and post-landslide Sentinel-2A images, along with digital elevation model (DEM) data. Moreover, a multichannel differential landslide dataset was constructed through spectral analysis of Sentinel-2A images, which facilitates network training and enables differentiation between landslides and other objects with similar spectral features, such as bare soil and buildings. The proposed MFLD-Net was tested in Shuzheng Valley and Detuo town in Sichuan, China, where earthquakes have occurred. The experimental results revealed that compared with advanced deep learning models, MFLD-Net has promising landslide detection performance. This study provides suggestions for selecting optimal deep learning methods and spectral band combinations for landslide detection and offers a publicly available landslide dataset for further research.

geosciences, multidisciplinary,engineering, geological
Mapping and monitoring dense non-aqueous phase liquid source zone by fused surface and cross-borehole electrical resistivity tomography

Fansong Meng,Jinguo Wang,Yongsheng Zhao

DOI: https://doi.org/10.1016/j.jhazmat.2024.135618

2024-10-05

Abstract:Effective characterization of dense non-aqueous phase liquid (DNAPL) source zones is crucial for remediating polluted sites. DNAPL often reside as residuals or pools within high-permeability lenses and above impermeable layers due to soil heterogeneity, gravity, and capillary barriers. Given the high cost of drilling, electrical resistivity tomography (ERT) techniques-including surface ERT and cross-borehole ERT, are commonly used for DNAPL source zone mapping and monitoring. However, the low spatial resolution of ERT increases uncertainty in source zone investigations. This study proposes a method for improving DNAPL mapping and monitoring by fusing surface and cross-borehole ERT data. Sandbox experiments were conducted to simulate a heterogeneous DNAPL source zone, employing both ERT methods for static mapping and dynamic monitoring. Reflective light imaging (RLM) was used to visualize DNAPL migration and provide saturation data, allowing for the quantification of ERT's effectiveness in characterizing DNAPL distribution. The results indicate that individual ERT methods face significant challenges in DNAPL source zone mapping due to background interference. Surface ERT alone tends to underestimate the extent of deeper DNAPL source zones. However, fusing surface and cross-borehole ERT results in a complementary enhancement of vertical spatial resolution, thereby improving the characterization of DNAPL source zones. The fusion of static and time-lapse ERT data substantially enhances DNAPL source zone mapping and monitoring capabilities. By calculating the ratio of the ERT-monitored area to the actual area using resistivity change contours (5 %, 10 %, 15 %), it was found that fusing surface and cross-borehole ERT data improved monitoring resolution by 50.48 % compared to surface ERT alone and by 22.95 % compared to cross-borehole ERT. Principal component analysis (PCA) was effective in fusing time-lapse data, while the weighted average method (WAM) outperformed PCA for static resistivity data fusion.
A Land Cover Classification Method for High-Resolution Remote Sensing Images Based on NDVI Deep Learning Fusion Network

Jingzheng Zhao,Liyuan Wang,Hui Yang,Penghai Wu,Biao Wang,Chengrong Pan,Yanlan Wu

DOI: https://doi.org/10.3390/rs14215455

IF: 5

2022-10-31

Remote Sensing

Abstract:High-resolution remote sensing (HRRS) images have few spectra, low interclass separability and large intraclass differences, and there are some problems in land cover classification (LCC) of HRRS images that only rely on spectral information, such as misclassification of small objects and unclear boundaries. Here, we propose a deep learning fusion network that effectively utilizes NDVI, called the Dense-Spectral-Location-NDVI network (DSLN). In DSLN, we first extract spatial location information from NDVI data at the same time as remote sensing image data to enhance the boundary information. Then, the spectral features are put into the encoding-decoding structure to abstract the depth features and restore the spatial information. The NDVI fusion module is used to fuse the NDVI information and depth features to improve the separability of land cover information. Experiments on the GF-1 dataset show that the mean OA (mOA) and the mean value of the Kappa coefficient (mKappa) of the DSLN network model reach 0.8069 and 0.7161, respectively, which have good applicability to temporal and spatial distribution. The comparison of the forest area released by Xuancheng Forestry Bureau and the forest area in Xuancheng produced by the DSLN model shows that the former is consistent with the latter. In conclusion, the DSLN network model is effectively applied in practice and can provide more accurate land cover data for regional ESV analysis.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary

[Radioimmunoassay of human prolactin with "Daiichi kit" and its clinical application (author's transl)].

Three-Dimensional Electrical Resistivity Tomography for Leachate Imaging Considering Thin Impermeable Layers of Landfills

Application of Electrical Resistivity Tomography to Monitor the Dewatering of Vertical and Horizontal Wells in Municipal Solid Waste Landfills

A Real-Time Method to Detect the Leakage Location in Urban Water Distribution Networks

Characterizing Multi-Source Heavy Metal Contaminated Sites at the Hun River Basin: an Integrated Deep Learning and Data Assimilation Approach

Multifaceted anomaly detection framework for leachate monitoring in landfills

Improving Deep Groundwater Aquifer Characterization with Deep Learning Inversion of Audio-Frequency Magnetotelluric Data

Deep Learning to Estimate Permeability using Geophysical Data

Deep Learning Joint Inversion of Electrical Data for Ahead-Prospecting in Tunneling

Improving efficiency and accuracy of levee hazard detection with deep learning

LMDFusion: A lightweight infrared and visible image fusion network for substation equipment based on mask and residual dense connection

The Application of Three-Dimensional High-Density Electrical Method in Detecting Vertical HDPE Membranes at Landfill Sites

Self-potential Inversion Based on Attention U-Net Deep Learning Network

Water source identification in mines combining LIF technology and ResNet

Fuzzy deep wavelet neural network with hybrid learning algorithm: Application to electrical resistivity imaging inversion

Coupled Hydrogeophysical Inversion of DNAPL Source Zone Architecture and Permeability Field in a 3D Heterogeneous Sandbox by Assimilation Time-Lapse Cross-Borehole Electrical Resistivity Data Via Ensemble Kalman Filtering

Study on Resistivity Imaging of Urban Landfill Leachate Channel Using 3D Electrical Resistivity Tomography with Annular Electrode Configuration

MTL-FaultNet: Seismic data reconstruction assisted multi-task deep learning 3D fault interpretation

Integrating sentinel-2a imagery, DEM data, and spectral feature analysis for landslide detection via fully convolutional networks

Mapping and monitoring dense non-aqueous phase liquid source zone by fused surface and cross-borehole electrical resistivity tomography

A Land Cover Classification Method for High-Resolution Remote Sensing Images Based on NDVI Deep Learning Fusion Network