MEDSS: A Multi-Agent Environmental Decision Support System framework for model management

R. Chi,P. Carando,Andrew Whinston

DOI: https://doi.org/10.1007/BF02283652

IF: 4.82

1992-12-01

Annals of Operations Research

Abstract:

What problem does this paper attempt to address?

Crosstalk-free Hybrid Integrated Multimodal Sensor for Human Temperature, Humidity, and Pressure Monitoring

Yuanbin Mu,Jiagen Cheng,Wei Shi,Weihuang Yang,Fengjie Qiao,Shan Wang,Chenxi Yue,Chaoran Liu,Yu Gao,Jianhao Zhang,Pengfei Chen,Dujuan Li,Jianfeng Ping,Linxi Dong

DOI: https://doi.org/10.1016/j.xcrp.2024.102223

IF: 8.9

2024-01-01

Cell Reports Physical Science

Abstract:Current developments in flexible sensors for epidermal pressure monitoring lack a fully integrated multimodal solution due to challenges such as crosstalk and complex integration processes. Here, a crosstalk-free multimodal sensor is presented by simple vertical lamination and spraying. Except for integrating the multimodal sensor, the device is equipped with a signal conditioning circuit, enhancing its portability. Importantly, each sensor is sensitive only to its specific stimulus but not to other stimuli, enabling signal decoupling without complex algorithms. The pressure sensor exhibits enhanced sensitivity (eight times greater than unstructured designs), and the temperature sensor shows a high sensitivity of 60.64 U / degrees C and a linearity of R2 2 = 0.9982 below 160 degrees C. degrees C. Meanwhile, the capacitance of the humidity sensor varies by 72 pF as humidity increases from 15% to 95%. The high integration and simple fabrication process provides a promising design concept for application in pressure ulcer prevention and telemedicine.
A Crease-Based Bending-Insensitive Liquid Metal Sensor for Pressure Measurement on Curved Surfaces

Puyan Li,Junjie Song,Xiuju Song,Ruirui Zhong,Zhaoxi Hong,Yixiong Feng,Jianrong Tan

DOI: https://doi.org/10.1109/icnsc62968.2024.10760124

2024-01-01

Abstract:Liquid metal-based pressure sensor is a kind of flexible tactile sensor that senses external pressure stimuli based on piezoresistive effects by encapsulating gallium-based liquid metal in flexible microchannels. Considering many advantages such as high flexibility and good stability, liquid metal pressure sensors are of interest in a variety of fields including health monitoring, medicine, and soft robotics. Due to the low Young modulus of liquid metal, both applied pressure and bending generate nonnegligible strain to change their morphology, which triggers the drift of resistance signals in pressure perception. Thus, this paper proposes a crease-based sensor, which has the characteristic to suppress bending interference. Based on the inspiration of using creases for stress absorption, the groove structure is designed and integrated between microchannels, forming an array of equally spaced grooves. The sensor is made by casting silica gel in two 3D-printed molds that can form the designed structure, injecting and encapsulating liquid metal connecting to electrodes. The cross-sectional area changes of microchannels under different loading conditions are simulated by the Finite element method. Then the resistances of liquid metal can be calculated with the cross-sectional area changes using the law of resistance, revealing the relationships between the detected resistances and applied pressures. The sensing performance of the sensor was tested under various loading conditions, including pure-bending, folding, and compressed on curved surfaces. Simulations and electrical tests prove that the structure can suppress the signal draft of the sensor placed on curved surfaces. The sensor is made of cheap materials and can be directly placed on curved surfaces to detect pressure, avoiding the influence of bending, which shows great application potential in flexible gripper perception, wheeled robot force control, and other aspects.
A Flexible Pressure Sensor Based on Silicon Nanomembrane

Lixia Cheng,Xiaojian Hao,Guochang Liu,Wendong Zhang,Jiangong Cui,Guojun Zhang,Yuhua Yang,Renxin Wang

DOI: https://doi.org/10.3390/bios13010131

2023-01-12

Abstract:With advances in new materials and technologies, there has been increasing research focused on flexible sensors. However, in most flexible pressure sensors made using new materials, it is challenging to achieve high detection sensitivity across a wide pressure range. Although traditional silicon-based sensors have good performance, they are not formable and, because of their rigidity and brittleness, they are not suitable for fitting with soft human skin, which limits their application in wearable devices to collect various signals. Silicon nanomembranes are ultra-thin, flexible materials with excellent piezoresistive properties, and they can be applied in various fields, such as in soft robots and flexible devices. In this study, we developed a flexible pressure sensor based on the use of silicon nanomembranes (with a thickness of only 340 nm) as piezoresistive units, which were transferred onto a flexible polydimethylsiloxane (PDMS) substrate. The flexible pressure sensor operated normally in the range of 0-200 kPa, and the sensitivity of the sensor reached 0.0185 kPa-1 in the low-pressure range of 0-5 kPa. In the high-pressure range of 5-200 kPa, the sensitivity of the sensor was maintained at 0.0023 kPa-1. The proposed sensor exhibited a fast response and excellent long-term stability and could recognize human movements, such as the bending of fingers and wrist joints, while maintaining a stable output. Thus, the developed flexible pressure sensor has promising applications in body monitoring and wearable devices.
Highly Sensitive, Flexible MEMS Based Pressure Sensor with Photoresist Insulation Layer.

Z. He,Wenjun Chen,Binghao Liang,Zikang Tang,Xuchun Gui,Huiwei Du,Zhiqiang Lin,Rongliang Yang,Yuanyuan Shang,A. Cao

DOI: https://doi.org/10.1002/smll.201702422

IF: 13.3

2017-11-01

Small

Abstract:Pressure sensing is a crucial function for flexible and wearable electronics, such as artificial skin and health monitoring. Recent progress in material and device structure of pressure sensors has brought breakthroughs in flexibility, self-healing, and sensitivity. However, the fabrication process of many pressure sensors is too complicated and difficult to integrate with traditional silicon-based Micro-Electro-Mechanical System(MEMS). Here, this study demonstrates a scalable and integratable contact resistance-based pressure sensor based on a carbon nanotube conductive network and a photoresist insulation layer. The pressure sensors have high sensitivity (95.5 kPa-1 ), low sensing threshold (16 Pa), fast response speed (<16 ms), and zero power consumption when without loading pressure. The sensitivity, sensing threshold, and dynamic range are all tunable by conveniently modifying the hole diameter and thickness of insulation layer.

Medicine,Engineering,Materials Science
A Flexible Resistive Pressure Sensor Based On Thermally Expandable Microspheres

Jianing Wu,Miao Tang,Haoyue Zhuo,Hongkun Lv,Jiecong Cai,Zhuo Li

DOI: https://doi.org/10.1109/ECTC32862.2020.00244

2020-01-01

Abstract:flexible pressure sensors, as important parts of electronic skins, have attracted great attention for their great potential applications in soft robot, wearable electronic device and biomedical diagnosis. Pressure sensors based on resistive working mechanisms have attracted more attention owing to their high reliability, facile fabrication techniques and low energy consumption. Recently, great efforts have been focused on increasing the sensitivity of flexible pressure sensors, however, developing high-sensitive pressure sensors with a cost-effective fabrication method are still challenging. In this study, a new type of flexible pressure sensor with great sensitivity of 4.11 kPa(-1), fast response time (<35 ms) and high stability (1000 cycles of pressure loading/unloading) has been designed based on thermal expandable microspheres. In addition, the fabricated pressure sensor is successfully applied to detect tiny human motions ( deglutition, vocal cord vibration) and monitor finger bending. More importantly, because of the simple fabrication, the flexible pressure sensor can easily achieve large-scale production.
Flexible pressure sensor enhanced by polydimethylsiloxane and microstructured conductive networks with positive resistance-pressure response and wide working range

Jia-Chen Shang,Heng Yang,Guang-Qi Hong,Wen-Hao Zhao,Yi-Fan Yang

DOI: https://doi.org/10.1016/j.compositesb.2023.110931

2023-09-01

Abstract:Improving the performance of flexible pressure sensors has received increasing attention owing to their numerous applications in advanced technologies. However, many approaches that yield exceptional performance often involve complex manufacturing processes and high costs, which are not conducive to the large-scale production and application of flexible pressure sensors. Therefore, this paper presents a simple and efficient method, combining a pre-strain strategy with polydimethylsiloxane infiltration, for manufacturing flexible pressure sensors with a wide working range, enhanced sensitivity, and good stability. Sensors fabricated using this method exhibit an improved sensitivity of 0.0331 kPa−1 within the broad working range of 0.11–1250 kPa, ultra-fast response time of 8 ms, and good stability as well as repeatability over 2500 cycles of 15% strain loading. The sensing mechanism and resistance model of the sensor were investigated, and a sensing model based on the tunneling effect and resistance model was developed. The coefficient of determination between the model and the experimental data exceeded 0.99, thereby verifying its validity. Finally, a sensor array was tested to locate the pressure and recognize the object shape within a large pressure range, demonstrating its potential applications in engineering fields with high-pressure requirements. This study provides a reference for the simple and cost-effective manufacturing of advanced flexible sensors and offers valuable insights into the large-scale production of flexible sensors.

engineering, multidisciplinary,materials science, composites
Wearable Microfluidic Diaphragm Pressure Sensor for Health and Tactile Touch Monitoring

Yuji Gao,Hiroki Ota,Ethan W. Schaler,Kevin Chen,Allan Zhao,Wei Gao,Hossain M. Fahad,Yonggang Leng,Anzong Zheng,Furui Xiong,Chuchu Zhang,Li‐Chia Tai,Peida Zhao,Ronald S. Fearing,Ali Javey,Li-Chia Tai

DOI: https://doi.org/10.1002/adma.201701985

IF: 29.4

2017-08-18

Advanced Materials

Abstract:Flexible pressure sensors have many potential applications in wearable electronics, robotics, health monitoring, and more. In particular, liquid-metal-based sensors are especially promising as they can undergo strains of over 200% without failure. However, current liquid-metal-based strain sensors are incapable of resolving small pressure changes in the few kPa range, making them unsuitable for applications such as heart-rate monitoring, which require a much lower pressure detection resolution. In this paper, a microfluidic tactile diaphragm pressure sensor based on embedded Galinstan microchannels (70 µm width × 70 µm height) capable of resolving sub-50 Pa changes in pressure with sub-100 Pa detection limits and a response time of 90 ms is demonstrated. An embedded equivalent Wheatstone bridge circuit makes the most of tangential and radial strain fields, leading to high sensitivities of a 0.0835 kPa<sup>-1</sup> change in output voltage. The Wheatstone bridge also provides temperature self-compensation, allowing for operation in the range of 20-50 °C. As examples of potential applications, a polydimethylsiloxane (PDMS) wristband with an embedded microfluidic diaphragm pressure sensor capable of real-time pulse monitoring and a PDMS glove with multiple embedded sensors to provide comprehensive tactile feedback of a human hand when touching or holding objects are demonstrated.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Design, Fabrication, and Implementation of an Array-Type MEMS Piezoresistive Intelligent Pressure Sensor System

Jiahong Zhang,Jianxiang Chen,Min Li,Yixian Ge,Tingting Wang,Peng Shan,Xiaoli Mao

DOI: https://doi.org/10.3390/mi9030104

2018-02-28

Abstract:To meet the radiosonde requirement of high sensitivity and linearity, this study designs and implements a monolithically integrated array-type piezoresistive intelligent pressure sensor system which is made up of two groups of four pressure sensors with the pressure range of 0⁻50 kPa and 0⁻100 kPa respectively. First, theoretical models and ANSYS (version 14.5, Canonsburg, PA, USA) finite element method (FEM) are adopted to optimize the parameters of array sensor structure. Combing with FEM stress distribution results, the size and material characteristics of the array-type sensor are determined according to the analysis of the sensitivity and the ratio of signal to noise (SNR). Based on the optimized parameters, the manufacture and packaging of array-type sensor chips are then realized by using the standard complementary metal-oxide-semiconductor (CMOS) and microelectromechanical system (MEMS) process. Furthermore, an intelligent acquisition and processing system for pressure and temperature signals is achieved. The S3C2440A microprocessor (Samsung, Seoul, Korea) is regarded as the core part which can be applied to collect and process data. In particular, digital signal storage, display and transmission are realized by the application of a graphical user interface (GUI) written in QT/E. Besides, for the sake of compensating the temperature drift and nonlinear error, the data fusion technique is proposed based on a wavelet neural network improved by genetic algorithm (GA-WNN) for average measuring signal. The GA-WNN model is implemented in hardware by using a S3C2440A microprocessor. Finally, the results of calibration and test experiments achieved with the temperature ranges from -20 to 20 °C show that: (1) the nonlinear error and the sensitivity of the array-type pressure sensor are 8330 × 10-4 and 0.052 mV/V/kPa in the range of 0⁻50 kPa, respectively; (2) the nonlinear error and the sensitivity are 8129 × 10-4 and 0.020 mV/V/kPa in the range of 50⁻100 kPa, respectively; (3) the overall error of the intelligent pressure sensor system is maintained at ±0.252% within the hybrid composite range (0⁻100 kPa). The involved results indicate that the developed array-type composite pressure sensor has good performance, which can provide a useful reference for the development of multi-range MEMS piezoresistive pressure sensor.
Ultra-Sensitive Thin-Film Pressure Sensor with Broad Dynamic Response Range and Excellent Versatility towards Pressure, Vibration, Bending and Temperature.

Q. Fu,H. Deng,Guopeng Sui,Ke Tian,Pei Yang

DOI: https://doi.org/10.1021/acsami.0c05618

2020-04-15

Abstract:Flexible pressure sensors with high sensitivity and wide pressure response range are attracting considerable research interest for their potential applications as e-skins. Nowadays, it seems a dilemma to realize high-performance, multifunctional pressure sensors with cost-effective, scalable strategy, which can simplify wearable sensing systems without additional signal processing, enabling device miniaturization and low power consumption. Herein, pressure sensors with ultrahigh sensitivity and broad response pressure range are developed with a low-cost, facile method by combining strain-induced percolation behavior and contact area contributions. Due to their special surface structure and strain induced conductive network formation behavior, these unique pressure sensors exhibit wide sensing range of 1 Pa-500 kPa, ultra-high sensitivity (1×106 kPa-1and 3.1×104 kPa-1 in the pressure ranges of 1 Pa-20 kPa and 20-500 kPa, respectively), fast signal response (< 50 ms), low detect limit (1 Pa) and high stability over 500 loading/unloading cycles. These characteristics allow the devices work as e-skins to monitor human pulse signals and finger touch. Moreover, these sensors illustrate precise electrical response to mechanical vibration, bending and temperature stimuli, which afford the ability of detecting cell phone call-in vibration signals, joint bending and spatial pressure & temperature distributions, indicating promising applications in next-generation wearable, multifunctional e-skins.

Engineering,Medicine,Materials Science
Self‐Powered Flexible Sensor Array for Dynamic Pressure Monitoring

Li Wu,Jiangtao Xue,Jianping Meng,Bojing Shi,Wei Sun,Engui Wang,Mengji Dong,Xuemei Zheng,Yuxiang Wu,Yusheng Li,Zhou Li

DOI: https://doi.org/10.1002/adfm.202316712

IF: 19

2024-03-12

Advanced Functional Materials

Abstract:This work designs a self‐powered flexible sensor array based on the microcavity structure for dynamic pressure monitoring. The sensor exhibits fast response and high sensitivity. It holds potential for fields such as monitoring pressure changes in the movement of human bodies and can contribute significantly to pressure assessment during total knee replacement. Flexible pressure sensors are valuable in applications such as electronic skin, smart robots, artificial prosthetics, and wearable electronics. In this study, a fully packaged, flexible, self‐powered, long‐term stable sensor array based on piezoelectrets is developed for pressure monitoring. A pressure sensor with a microcavity structure and a thickness of 500 μm achieved an impressive piezoelectric coefficient of 23.8 pC N−1 and a fast response time of 93 ms. The sensor yielded an output voltage of 0.26 V when subjected to a force using 0.3 g soybeans, and it displayed a remarkable linear relationship (R2 = 0.992) between force and electricity with pressure ranging from 1.4 to 13.6 N and a sensitivity of 9 mV N−1. Real‐time monitoring of sound vibration, radial artery pulse, and finger movement is demonstrated along with the successful recording of dynamic pressure changes within the porcine knee joint. It holds potential for fields such as monitoring pressure changes in the movement of human bodies and robotics and can contribute significantly to pressure assessment during total knee replacement.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A high pressure sensor with circular diaphragm based on MEMS technology

Libo Zhao,Xudong Fang,Yulong Zhao,Zhuangde Jiang,Yong Li

DOI: https://doi.org/10.4028/www.scientific.net/KEM.483.206

2011-01-01

Key Engineering Materials

Abstract:A pressure sensor in the range of 25 MPa with circular diaphragm is designed and fabricated, and the calibration experiments prove its excellent performance, which also reflects the correct choice of design after analyzing the effect of diaphragm dimension, location and shapes of piezoresistors. Circular diaphragms of different thickness and diameters are simulated to meet the pressure requirement of 25 MPa. It also displays the advantage of piezoresistive sensors over others and the difference characteristics between different types of piezoresistive sensors. And then the effect of piezoresistor location is analyzed and simulated to attain high accuracy and sensitivity after the circular diaphragm chip is packaged with borosilicate glass ring. The whole fabrication process of the chip is inexpensive and compatible with standard MEMS process. The experimental results show the developed high pressure sensor with the sensitivity of 2.533 mV/MPa has excellent performance, such as linearity of 0.08%FS, hysteresis of 0.03%FS, accuracy of 0.11%FS and repeatability of 0.03%FS under high temperature of 200 degrees C.
A Flexible Piezocapacitive Pressure Sensor with Microsphere-Array Electrodes

Shu Ying,Jiean Li,Jinrong Huang,Jia-Han Zhang,Jing Zhang,Yongchang Jiang,Xidi Sun,Lijia Pan,Yi Shi

DOI: https://doi.org/10.3390/nano13111702

IF: 5.3

2023-05-23

Nanomaterials

Abstract:Flexible pressure sensors that emulate the sensation and characteristics of natural skins are of great importance in wearable medical devices, intelligent robots, and human–machine interfaces. The microstructure of the pressure-sensitive layer plays a significant role in the sensor’s overall performance. However, microstructures usually require complex and costly processes such as photolithography or chemical etching for fabrication. This paper proposes a novel approach that combines self-assembled technology to prepare a high-performance flexible capacitive pressure sensor with a microsphere-array gold electrode and a nanofiber nonwoven dielectric material. When subjected to pressure, the microsphere structures of the gold electrode deform via compressing the medium layer, leading to a significant increase in the relative area between the electrodes and a corresponding change in the thickness of the medium layer, as simulated in COMSOL simulations and experiments, which presents high sensitivity (1.807 kPa−1). The developed sensor demonstrates excellent performance in detecting signals such as slight object deformations and human finger bending.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
High Sensitivity and Broad Range Flexible Pressure Sensor Using Multilayered Porous PDMS/AgNP Sponge

Shuai Zhao,Rong Zhu

DOI: https://doi.org/10.1002/admt.201900414

IF: 6.8

2019-01-01

Advanced Materials Technologies

Abstract:Flexible pressure sensors attract wide attentions in recent years for their significant applications in wearable electronics and health monitoring. It is strongly desired that a pressure sensor possesses both low detection limit and wide measuring capability, covering a broad pressure range from Pa to hundred kPa, to meet diverse demands in different applications. This paper proposes a novel flexible pressure sensor based on thermosensation, using a multilayered and graded-porosity polydimethylsiloxane/silver nanoparticle sponge as piezo-thermic transduction. The sensor exhibits a high sensitivity, a low detection limit of 4.1 Pa, and a wide measuring range up to 200 kPa, which leads to a high range-to-limit ratio of about 50 000. The pressure sensor is monolithically integrated with a temperature sensor and dissolves temperature-compensation. The unique combination of properties makes it feasible to monitor various human signals from subtle wrist pulse to finger tapping pressure and foot stepping pressure by a single device, which shows competent capabilities for multifarious applications in wearable electronics and health monitoring.
Novel Flexible Pressure Sensor with Symmetrical Structure Based on 2-D MoS2 Material on Polydimethylsiloxane Substrate

Shaoxiong Deng,Feng Li,Mengye Cai,Yanfeng Jiang

DOI: https://doi.org/10.3390/sym16091242

2024-09-22

Symmetry

Abstract:Flexible pressure sensors can be widely utilized in healthcare, human–computer interaction, and the Internet of Things (IoT). There is an increasing demand for high-precision and high-sensitivity flexible pressure sensors. In response to this demand, a novel flexible pressure sensor with a symmetrical structure composed of MoS2 and PDMS is designed in this paper. Simulation is conducted on the designed flexible pressure sensor. Its piezoresistive effect is analyzed, and the influence of the cavity structure on its sensitivity is investigated. Additionally, a fully symmetrical Wheatstone bridge composed of the flexible pressure sensor is designed and simulated. Its symmetrical structure improves the temperature stability and the sensitivity of the sensor. The structure can be used to convert pressure changes into voltage changes conveniently. It indicates that the sensor achieves a sensitivity of 1.13 kPa−1 in the micro-pressure range of 0–20 kPa, with an output voltage sensitivity of 3.729 V/kPa. The designed flexible pressure sensor exhibits promising potential for applications in wearable devices and related fields, owing to its high sensitivity and precision.

multidisciplinary sciences
Design and Characterization of a Flexible Relative Pressure Sensor With Embedded Micro Pressure Channel Fabricated by Flexible Printed Circuit Board Technology

Yi Chiu,You-Zen Chen,Chia-Chun Hsieh,Hao-Chiao Hong,Yi Chiu,You-Zen Chen,Chia-Chun Hsieh,Hao-Chiao Hong

DOI: https://doi.org/10.1109/jsen.2021.3124582

IF: 4.3

2021-12-15

IEEE Sensors Journal

Abstract:This paper presents a relative pressure sensor fabricated by a standard industrial flexible printed circuit board (FPCB) technology. The passive wireless sensor consists of a variable sensing capacitor and a planar coil inductor. When the external pressure is applied to the sensing capacitor, it changes the air gap and shifts the LC resonance frequency which is detected by an antenna wirelessly. The sensing cavity of the variable capacitor is extended to the opening at the end of an embedded pressure channel in the FPCB strip to enable relative pressure measurement. Measurement results showed that the proposed sensor with such an open sensing cavity had much higher frequency sensitivity (up to 0.4 %/mmHg) compared with the sensor with a sealed cavity (< 0.01 %/mmHg in this work and ≤ 0.08 in literature). With the enhanced sensitivity, the measured pressure resolution could reach 0.2 mmHg. The potential application of the proposed sensor includes gauge pressure measurement with respect to local atmospheric pressure, such as intracranial pressure (ICP) monitoring, without complicated re-calibration procedures. The flat FPCB structure facilitates applications with limited space for sensor installation, such as in the subdural implantation procedures. Furthermore, the proposed technology enables future development of flexible microfluidic devices.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Prefabrication design, theoretical framework and simulation demonstration of a meander-shaped MEMS piezoresistive pressure sensor implanted on silicon substrate circular diaphragm for enhancement of key performance parameters utilized for low-pressure applications

Dadasikandar Kanekal,Sumit Kumar Jindal

DOI: https://doi.org/10.1007/s10825-024-02133-0

IF: 1.9828

2024-02-19

Journal of Computational Electronics

Abstract:Pressure sensors have shown an astounding change in revenue generation during the past few years. The rapid expansion of smart micro-system technology for automation systems has significantly increased the demand for sensors. One of the main reasons pressure sensors are flourishing in the market is their high sensitivity, versatility, miniaturization and mass production. In this proposed work, a MEMS meander-shaped piezoresistive pressure sensor for low-pressure applications is presented. It is mounted on a rigidly clamped circular diaphragm. COMSOL Multiphysics software was employed to develop the model and simulate it at a pressure range of 0–1 MPa. High sensitivity and low nonlinearity in the proposed model are analysed. Analytical models and numerical simulations are used to validate the performance advantage of this design. To get reliable simulation results, FEA (finite element analysis) was used with the COMSOL Multiphysics software. The results are then compared to previous research studies. Over an operating range of 0–1 MPa, the proposed design produces a sensitivity of 164.6 mV/V/MPa. As a result, the proposed architecture has a wide range of application possibilities.

engineering, electrical & electronic,physics, applied
A Flexible Thin-Film Pressure Sensor Based on Thermal Conduction Mechanism for Pressure, Orientation, and Mapping Signal Acquisition

Peng Jiang,Y. Cheung,Huikai Xie,Hongyu Yu,Yang Deng,Zhongyi Liu,Xiaoyi Wang

DOI: https://doi.org/10.1109/JSEN.2022.3230982

IF: 4.3

2023-02-01

IEEE Sensors Journal

Abstract:In recent years, high-performance flexible pressure sensors have boomed with wide applications in touch screens, wearable electronic devices, human–machine interface, real-time physiological signal perception, and other fields, and have drawn extensive research attention in the field of wearable electronic devices and intelligent E-skin. However, because the “function” of sensors is often incompatible with a “simple” manufacturing strategy, the flexible sensor can hardly simultaneously meet the objectives of low cost and excellent performance. Herein, we propose a facile and low-cost flexible thermal resistive pressure sensor (FTRPS) based on the heat transfer sensing mechanism. The device consists of an ultra-thin thermal sensing film (thermal detectors: platinum resistors on Parylene-C film: $20\,\mu \text{m}$ ) and an elastomer pressure converter (Dragon Skin). The pressure value can be transduced via the elastomer deformation and monitored through the heat loss of the thermal sensing film. Leveraging different Young’s modulus of the elastomer, the measurement range of different sensors can be tuned with material selection. The fabricated sensor exhibits high linearity ( ${R}^{2}$ : 0.996) for the whole measurement range and realizes the pressure orientation sensing function with the circular thermal detector design. Furthermore, the single sensor has been validated in chess piece recognition, and the successful application of the sensor matrix in the pressure mapping of a letter protruding indicates that the FTRPS can be a part of wearable devices and human–machine interfaces. The proposed FTRPS can be used in mass production and promotes the application of flexible pressure sensors.

Materials Science,Engineering
Flexible Pressure Sensors Tuned by Interface Structure Design – Numerical and Experimental Study

Fei Li,Haijun Wang,Siqi Nan,Yunpeng Yang,Zhenchao Wang,Rui Zhu,Tianwei Zhang,Jie Zhang

DOI: https://doi.org/10.1016/j.apsusc.2023.158021

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Flexible pressure sensors have aroused wide research interest because they can be conformably attached to various irregular surfaces. At the present, it is still challenge to adjust the sensitivity and response range of resistive pressure sensors for practical uses. To uncover the insights of sensing ability, the surface textures are designed with pyramids of different sizes and density distributions for finite element analyses and experimental studies. The results show that the initial contact area has substantial effects on the sensitivity while the structure dimensions are proportional to the ability of sensing range. Using these design strategies, the sensor with the highest sensitivity (18.4 kPa-1) is constructed by the structures with gradient height distribution crossing the sensing area. The obtained sensitivity is among the highest performed resistive pressure sensors in the category. The sensitivity and response range of the sensor can be adjusted by changing the density and size of the pyra-mids. In addition, the flexible sensor based on PDMS elastomer and MWCNTs/PDMS conductor also reacts fast (less than 200 ms) when sensed a pressure change. Furthermore, the flexible resistive pressure sensors are highly reproducible and stable through the 5000 cycles repeated pressure stress without the sign of degradation. In application front, the sensors can quickly and accurately identify tactile signals and haptic signals at different frequencies under different pressures. The pressure sensors applied this design strategy are suitable for wearable electronics in human health care with the biocompatible materials with the flexible and comfortable natures.
Hydrogen-Bond-Triggered Hybrid Nanofibrous Membrane-Based Wearable Pressure Sensor with Ultrahigh Sensitivity over a Broad Pressure Range.

Sudeep Sharma,M. Sharifuzzaman,Ashok Chhetry,Hyunsik Kim,Chani Park,Shipeng Zhang,H. Yoon,J. Park,Xue Hui

DOI: https://doi.org/10.1021/acsnano.0c07847

IF: 17.1

2021-01-14

ACS Nano

Abstract:Recently, flexible capacitive pressure sensors have received significant attention in the field of wearable electronics. The high sensitivity over a wide linear range combined with long-term durability is a critical requirement for the fabrication of reliable pressure sensors for versatile applications. Herein, we propose a special approach to enhance the sensitivity and linearity range of a capacitive pressure sensor by fabricating a hybrid ionic nanofibrous membrane as a sensing layer composed of Ti3C2Tx MXene and an ionic salt of lithium sulfonamides in a poly(vinyl alcohol) elastomer matrix. The reversible ion pumping triggered by a hydrogen bond in the hybrid sensing layer leads to high sensitivities of 5.5 and 1.5 kPa-1 in the wide linear ranges of 0-30 and 30-250 kPa, respectively, and a fast response time of 70.4 ms. In addition, the fabricated sensor exhibits a minimum detection limit of 2 Pa and high durability over 20 000 continuous cycles even under a high pressure of 45 kPa. These results indicate that the proposed sensor can be potentially used in mobile medical monitoring devices and next-generation artificial e-skin.

Medicine,Engineering,Materials Science
Flexible piezoresistive sensor constructing from ILs/MWCNTs/PVDF ternary composite for high sensitivity and wide detection range

Ding Zhang,Renkun Zhang,Jiatai Sun,Jingxiang Zhang,Qiuying Zhao,Haiyan He,Huajie Huang,Lu Yang,Yuanping Xu

DOI: https://doi.org/10.1016/j.sna.2024.115037

IF: 4.291

2024-01-19

Sensors and Actuators A Physical

Abstract:Recently, flexible pressure sensors rooting in piezoresistive mechanism have gained immense popularity due to their excellent application potential in the fields of software robotics, electronic skins and human health monitoring, etc. However, the trade-off between sensitivity and pressure range still remains challenging for the wide application of piezoresistive sensors. Herein, a novel flexible pressure sensor constructing from electrospun ionic liquids/Multi-walled carbon nanotubes/poly(vinylidene fluoride) (ILs/MWCNTs/PVDF) ternary composite that permits high-sensitivity detection over broad pressure range is implemented. Benefitting from the filamentous porous network coupled with urchin-shaped beads, the newly developed active ternary composite showed excellent compressibility and high sensitivity to pressure, endowing the resultant piezoresistive sensor with broad-pressure detection ranging from 1.0 Pa to 307 kPa with a maximum sensitivity of 0.075 kPa −1 . Simultaneously, the proposed sensor present fast response/recovery time of 120/80 ms and high operation stability over 14000 cyclic pressings. Also, the feasibility of sensor in effectively monitoring various physiological signals, recognizing keyboards and expressing spatial pressure distribution is demonstrated, implying their great potential as viable high-performance pressure sensor.

engineering, electrical & electronic,instruments & instrumentation

MEDSS: A Multi-Agent Environmental Decision Support System framework for model management

Crosstalk-free Hybrid Integrated Multimodal Sensor for Human Temperature, Humidity, and Pressure Monitoring

A Crease-Based Bending-Insensitive Liquid Metal Sensor for Pressure Measurement on Curved Surfaces

A Flexible Pressure Sensor Based on Silicon Nanomembrane

Highly Sensitive, Flexible MEMS Based Pressure Sensor with Photoresist Insulation Layer.

A Flexible Resistive Pressure Sensor Based On Thermally Expandable Microspheres

Flexible pressure sensor enhanced by polydimethylsiloxane and microstructured conductive networks with positive resistance-pressure response and wide working range

Wearable Microfluidic Diaphragm Pressure Sensor for Health and Tactile Touch Monitoring

Design, Fabrication, and Implementation of an Array-Type MEMS Piezoresistive Intelligent Pressure Sensor System

Ultra-Sensitive Thin-Film Pressure Sensor with Broad Dynamic Response Range and Excellent Versatility towards Pressure, Vibration, Bending and Temperature.

Self‐Powered Flexible Sensor Array for Dynamic Pressure Monitoring

A high pressure sensor with circular diaphragm based on MEMS technology

A Flexible Piezocapacitive Pressure Sensor with Microsphere-Array Electrodes

High Sensitivity and Broad Range Flexible Pressure Sensor Using Multilayered Porous PDMS/AgNP Sponge

Novel Flexible Pressure Sensor with Symmetrical Structure Based on 2-D MoS2 Material on Polydimethylsiloxane Substrate

Design and Characterization of a Flexible Relative Pressure Sensor With Embedded Micro Pressure Channel Fabricated by Flexible Printed Circuit Board Technology

Prefabrication design, theoretical framework and simulation demonstration of a meander-shaped MEMS piezoresistive pressure sensor implanted on silicon substrate circular diaphragm for enhancement of key performance parameters utilized for low-pressure applications

A Flexible Thin-Film Pressure Sensor Based on Thermal Conduction Mechanism for Pressure, Orientation, and Mapping Signal Acquisition

Flexible Pressure Sensors Tuned by Interface Structure Design – Numerical and Experimental Study

Hydrogen-Bond-Triggered Hybrid Nanofibrous Membrane-Based Wearable Pressure Sensor with Ultrahigh Sensitivity over a Broad Pressure Range.

Flexible piezoresistive sensor constructing from ILs/MWCNTs/PVDF ternary composite for high sensitivity and wide detection range