Abstract:Solvent extraction is an efficient method that separates surfactants and pollutants in pumped groundwater during surfactant-enhanced aquifer remediation (SEAR). This paper addresses the factors that influence the extraction efficiency of solvent extraction method. A series of batch experiments were conducted to verify the effectiveness of solvent extraction by describing the interactions among contaminants, surfactants, and solvents, using factors such as extraction time, solvent/water volumetric ratio, surfactant type and concentration, contaminants type and concentration, solution salinity and solvent equivalent alkyl carbon numbers (EACNs). The surfactants, contaminants, and solvents used were sodium dodecyl sulfate (SDS) and Tween 80, benzene and nitrobenzene, n-hexane, n-decane and n-hexadecane, respectively. The results indicated that (I) the increase in extraction time or solvent/water volumetric ratio caused higher benzene removal efficiency, but the increment of removal was not significant after 2 h or 0.1; (2) surfactant type and concentration significantly affected extraction efficiency. The increase in SDS concentrations could generally increase benzene removal and then decline, whereas benzene removal seldom changed under the studied Tween 80 concentration range. Moreover, Tween 80 losses were much lower than that of SDS. When mixing the two surfactants, benzene was increasingly separated from the aqueous surfactant solutions by increasing the proportion of Tween 80, and surfactant losses almost depended on monomers instead of micelles within the aqueous surfactant solutions; (3) the efficiency of separating benzene from aqueous surfactant solutions was higher than that of nitrobenzene. Furthermore, n-hexane losses in the benzene aqueous solution were higher than that in the nitrobenzene aqueous solution; (4) higher inorganic salt concentration in the aqueous Tween 80 solutions could increase benzene removal and decrease Tween 80 losses, thereby improving extraction efficiency; (5) n-hexane was more suitable to separate benzene from aqueous Tween 80 solutions because its EACN was closest to the EACN of benzene. (C) 2014 Elsevier B.V. All rights reserved.

Purification of chlorine-containing wastewater using solvent extraction

Purification of chlorine-containing copper smelting wastewater using extraction-stripping-salting out method

Laboratory Evaluation of the Use of Solvent Extraction for Separation of Hydrophobic Organic Contaminants from Surfactant Solutions During Surfactant-Enhanced Aquifer Remediation

Extraction of chloride from slag flush wastewater using solvent N235

Complex extraction and stripping of H acid wastewater

Chloride recovery and simultaneous CO2 mineralization from rare earths high salinity wastewater by the Reaction-extraction-crystallization process

The removal of chloride from washing leachate of MSWI fly ash

Recovery of Fumaric Acid from Industrial Wastewater by Chemical Extraction and Stripping

Removal of Typical Volatile Organic Compounds in Condensed Freshwater by Activated Persulfate During Interfacial Solar Distillation

Molten hydroxide for detoxification of chlorine-containing waste: Unraveling chlorine retention efficiency and chlorine salt enrichment

Research progress on removal methods of Cl - from industrial wastewater

Removal of Chromium(iii) from Aqueous Waste Solution by Predispersed Solvent Extraction

[Extraction and Stripping of H Acid and DSD Acid Wastewater].

Elimination of pesticide from high salinity wastewater by electrochlorination process: Active chlorine species and scale-up performance

Organics abatement and recovery from wastewater by a polymerization-based electrochemically assisted persulfate process: Promotion effect of chloride ion and its mechanism

Surfactant-Enhanced Electroosmotic Flushing in a Trichlorobenzene Contaminated Clayey Soil.

Sulfate radical-based removal of chloride ion from strongly acidic wastewater: Kinetics and mechanism

Synergistic promotion of low-temperature pyrolysis and chloride complexation in waste salt purification process

Solvent extraction and separation of zinc-iron from spent pickling solution with tri-n-octylamine

An integrated system combining electrochemical oxidation and filtration processes to remove chlorine from pharmaceutical industry wastewater

Recovery of high‐purity 4‐Chloroguaiacol from bleaching wastewater by a heterogeneous extraction method