Abstract:Numerical analyses have been widely used to investigate the stability of deep excavations. The results of this type of analyses rely on the constitutive model that is adopted for the analyses. Although many advanced constitutive models have been developed for the simulation of soil behavior, they are often complex, expensive to use, and not well understood by practicing engineers. Hence, simple constitutive models, such as the Mohr–Coulomb model, are widely used in geotechnical engineering practice. However, these simple models, fail to represent some key features of soil behavior. Of particular importance in granular soils is the effect of changes in soil density on the soil behavior, an aspect that is often overlooked when simple constitutive models are used. In this study, a series of triaxial tests will be conducted on reconstructed gravelly sand to investigate the effect of the relative density and confining pressure on strength and stiffness characteristics of the soil. According to the test results, variations of the soil stiffness and peak deviatoric stress with relative density and confining pressure will be established. A novel disturbance function will then be proposed based on the disturbance state concept to capture the effect of soil density on its behavior. Subsequently, a constitutive model that is based on the original Duncan and Chang model will be developed that considers the effects of the confining pressure and relative density of the soil using the proposed disturbance function. The model is implemented in ABAQUS software and is verified by comparing the numerical results with experimental data. The application of the model is presented through the simulation of a deep supported excavation. The numerical results show that the model successfully simulates horizontal displacements of the support piles, with errors of <5% for the monitoring points. In particular, it is highlighted that the model is superior to the widely used Mohr–Coulomb model in the simulation of excavation problems, and yielded a safer design than that obtained using the Mohr–Coulomb model.

A Family of Constitutive Models Implemented in PLAXIS to Simulate Cemented Mine Backfill

Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

A nonlinear constitutive model for soft clay stabilized by magnesia cement considering the effect of solidified agent content

A metamodel for confined yield stress flows and parameters' estimation

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

A fractional-order two-surface plasticity model for over-consolidated clays and its application to deep gallery excavation

Formulation and implementation of elastoplastic constitutive model for carbonaceous slate

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

A viscoplastic constitutive model for plastic silts and clays for static slope stability applications

Formulation and implementation of an isotropic plasticity model enriched with shift stress and fractional flow rule

Two‐invariant modular implicit plasticity solver framework for geomechanical simulators

Modified Duncan-Chang Constitutive Model for Modeling Supported Excavations in Granular Soils

A micro-mechanical constitutive model for heterogeneous rocks with non-associated plastic matrix as implicit standard materials

A Constitutive Model for Cemented Tailings Backfill Under Uniaxial Compression

A standard thermodynamic-based extension of the Modified Cam-Clay soil model and its applications

Settlement and stability of a coal mine dump using a hypoplastic constitutive model

A three-dimensional elastoplastic constitutive model incorporating Lode angle dependence

A one-dimensional viscoelastic and viscoplastic constitutive approach to modeling the delayed behavior of clay and organic soils

3D Numerical Modelling of the Application of Cemented Paste Backfill on Displacements around Strip Excavations