Increased eggshell thickness in domestic fowls after administration of the antiprogesterone RU 38486 (Mifepristone).

C. Lundholm

DOI: https://doi.org/10.1111/J.1600-0773.1990.TB00809.X

1990-08-01

Acta Pharmacologica et Toxicologica

Abstract:

What problem does this paper attempt to address?

Ag–CuO–ZnO Metal–semiconductor Multiconcentric Nanotubes for Achieving Superior and Perdurable Photodegradation

Kaichen Xu,Jiagen Wu,Chuan Fu Tan,Ghim Wei Ho,Ang Wei,Minghui Hong

DOI: https://doi.org/10.1039/c7nr03279j

IF: 6.7

2017-01-01

Nanoscale

Abstract:Solar energy represents a robust and natural form of resource for environment remediation via photocatalytic pollutant degradation with minimum associated costs. However, due to the complexity of the photodegradation process, it has been a long-standing challenge to develop reliable photocatalytic systems with low recombination rates, excellent recyclability, and high utilization rates of solar energy, especially in the visible light range. In this work, a ternary hetero-nanostructured Ag-CuO-ZnO nanotube (NT) composite is fabricated via facile and low-temperature chemical and photochemical deposition methods. Under visible light irradiation, the as-synthesized ZnO NT based ternary composite exhibits a greater enhancement (∼300%) of photocatalytic activity than its counterpart, Ag-CuO-ZnO nanorods (NRs), in pollutant degradation. The enhanced photocatalytic capability is primarily attributed to the intensified visible light harvesting, efficient charge carrier separation and much larger surface area. Furthermore, our as-synthesised hybrid ternary Ag-CuO-ZnO NT composite demonstrates much higher photostability and retains ∼98% of degradation efficiency even after 20 usage cycles, which can be mainly ascribed to the more stable polar planes of ZnO NTs than those of ZnO NRs. These results afford a new route to construct ternary heterostructured composites with perdurable performance in sewage treatment and photocorrosion suppression.
Facile fabrication of a Z-scheme g-C 3 N 5 /Gd-MOF/silver nanocube composite as a new generation visible light active photocatalyst for abatement of persistent toxic pollutants

Varsha UshaVipinachandran,Susanta Kumar Bhunia

DOI: https://doi.org/10.1039/d3en00913k

2024-04-24

Environmental Science Nano

Abstract:Some of the persistent hazardous contaminants that readily dissolve in water with a recognizable hue are hexavalent chromium and neomycin antibiotic. Herein, a Z-scheme g-C 3 N 5 /Gd-MOF/silver nanocube (CNGdAg) ternary composite was successfully designed by the combination of graphitic carbon nitride (g-C 3 N 5 ), gadolinium-based molecular organic framework (Gd-MOF), and silver nanocubes (AgNCs). Under visible light irradiation, CNGdAg outperforms individual components and binary composites in the photoreduction of hexavalent chromium (Cr 6+ ) and removal of neomycin. The maximum photocatalytic efficiency of Cr 6+ (98%) in 150 minutes and complete neomycin removal in 25 minutes were accomplished by the CNGdAg-40% composite. A hydrothermal approach was chosen to prepare this visible light active composite. The formation of photogenerated electrons and superoxide radicals plays a major contributing factor in the efficient degradation in a short period without using any external components. The combined effect of the individual components in the composite led to the remarkable degradation via the Z-scheme pathway. This work exemplifies that the CNGdAg-40% photocatalyst can be used for the removal of heavy metal ions and organic contaminants from aquatic environments.

environmental sciences,chemistry, multidisciplinary,nanoscience & nanotechnology
Enhancement in Visible Light-Responsive Photocatalytic Activity by Embedding Cu-doped ZnO Nanoparticles on Multi-Walled Carbon Nanotubes

M. Ahmad,E. Ahmed,Z. L. Hong,X. L. Jiao,T. Abbas,N. R. Khalid

DOI: https://doi.org/10.1016/j.apsusc.2013.08.114

IF: 6.7

2013-01-01

Applied Surface Science

Abstract:Copper doped ZnO nanoparticles embedded on multi-walled carbon nanotubes (CNTs) were successfully synthesized using a facile, nontoxic sol method. The resulting visible light-responsive Cu-doped ZnO/CNTs composites were characterized using powder X-ray diffraction (XRD), high resolution transmission electron microscope (HR-TEM), transmission electron microscope (TEM), scanning electron microscope (SEM) with energy dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS) and Brunauer Emmett Teller (BET) surface area analyzer. Optical properties of Cu-doped ZnO/CNTs nanocomposites, studied using UV-vis diffuse reflectance spectroscopy and photoluminescence spectroscopy (PL), which exhibited extended light absorption in visible light region and possessed better charge separation capability, respectively as compared to Cu-doped ZnO, pure ZnO and ZnO/CNTs composite. The photocatalytic activity was tested by degradation of methyl orange (MO) dye under visible light irradiation. The results demonstrated that Cu-doped ZnO/CNTs nanocomposites effectively bleached out MO, showing an impressive photocatalytic enhancement over ZnO, commercial ZnO, Cu-doped ZnO nanoparticles and ZnO/CNTs nanocomposites. Chemical oxygen demand (COD) of textile wastewater was also measured before and after the photocatalysis experiment under sunlight to evaluate the mineralization of wastewater. The significant decrease in COD of the treated effluent revealed a complete destruction of the organic molecules along with color removal. This dramatically enhanced photoactivity of nanocomposite photocatalysts was attributed to greater adsorptivity of dyes, extended light absorption and increased charge separation efficiency due to excellent electrical properties of carbon nanotubes and the large surface area. (C) 2013 Elsevier B.V. All rights reserved.
A novel ZnS-CdS nanocomposite as a visible active photocatalyst for degradation of synthetic and real wastewaters

Minoo Khodamorady,Kiumars Bahrami

DOI: https://doi.org/10.1038/s41598-023-28725-7

2023-02-08

Huanjing Kexue/Environmental Science

Abstract:Abstract In this study, new magnetic nanocomposites with shell core structure with different molar ratios of ZnS-CdS were synthesized and their photocatalytic activity in dye removal from synthetic and real effluents in the presence of mercury high pressure lamp as a visible light source was investigated. Optimal photocatalyst with molar ratio of ZnS-CdS 0.25:0.75 showed the best performance in dye removal. Based on the particle distribution histogram of Fe 3 O 4 @BNPs@ZnS-CdS (ZnS/CdS: 0.25:0.75), particles with 60–100 nm have the highest abundance. According to the DRS results, hybridization of zinc sulfide with cadmium sulfide reduced the gap and as a result, light absorption was successfully extended to the visible area. The PL results confirm that the optimal photocatalyst (Fe 3 O 4 @BNPs@ZnS-CdS) has the lowest electron–hole recombination compared to Fe 3 O 4 @BNPs@ZnS and Fe 3 O 4 @BNPs@CdS. It should be noted that according to the DLS results, the charge on the optical photocomposite surface is negative at all acidic, alkaline and neutral pHs. One of the significant advantages in this study is the use of high-pressure mercury lamps as a light source, so that these lamps are very economical in terms of economy and also have a long life and excellent efficiency. The optimal photocatalyst not only showed excellent photocatalytic activity for the removal of methylene blue (96.6%) and methyl orange (70.9%) but also for the dye removal of textile effluents (Benton 98.5% and dark olive 100%). Introduced magnetic heterostructures are suitable options for dye removal from textile and spinning wastewaters.
Enhanced synergistic catalysis of novel Ag2O/CuO nanosheets under visible light illumination for the photodecomposition of three dyes

Naeem Akram,Jia Guo,Yuan Guo,Yuli Kou,Humbul Suleman,Jide Wang

DOI: https://doi.org/10.1016/j.jece.2020.104824

IF: 7.7

2021-04-01

Journal of Environmental Chemical Engineering

Abstract:Visible-light photocatalysis is considered a good alternative for effluent degradation, resulting in eco-friendly biodegradable products. Semiconductors derived bimetallic nanocomposites have sufficient bandgap potential for efficient effluent treatment upon their exposure to the visible light. In this work, Ag2O was deposited over CuO to improve the light captivating properties of the as-synthesized bimetallic catalyst. The bimetallic catalyst was studied for the photodegradation of three different azo dyes, by introducing persulfate as a sacrificial donor, under visible as well as sunlight irradiation. Novel leaf-like Ag2O/CuO catalyst has efficiently degraded 100% Congo Red (CR), 99.9% Rhodamine-B (RhB), and 97% Methyl Orange (MO) dyes within 6 min, 15 min, and 20 min, respectively. Photodecomposition of all three dyes was studied at various pH solutions and the most efficient photodegradation was observed with a neutral pH solution. ESR and radical probe experiments were conducted to identify the active radical species and to reveal the reaction mechanism. SO4•− and HO• radicals were the influential radicals during the photodegradation reaction. Notably, Ag2O/CuO catalyst exhibited 100% photodegradation of Congo Red dye without the addition of persulfate within 8 min, a superior characteristic than the other known bimetallic catalysts. The developed catalyst is easily recyclable and offered just a 1–2% decrease in its photocatalytic performance, for all three dyes, even after 5 consecutive cycles. Thus, the reported catalyst can be a suitable alternative to expensive rare-earth derived bimetallic catalysts and has a potential application for the detoxification of various organic pollutants, at the field scale.

engineering, chemical, environmental
Facile synthesis of ZnO/CuO/Ag2O ternary metal oxide nanocomposite for effective photodegradation of organic water pollutants

Parmeshwar Lal Meena,Krishna Poswal,Ajay Kumar Surela,Jitendra Kumar Saini

DOI: https://doi.org/10.2166/wst.2021.431

2021-09-30

Abstract:Abstract The current study is focused on fabrication of a ternary metal oxide nanocomposite (ZnO/CuO/Ag2O) as an efficient and superior photocatalyst by step-wise implanting of p-type CuO and Ag2O semiconductors onto an n-type semiconductor (ZnO) via a chemical method. The structural and textural characteristics of the manufactured samples were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy combined with electron dispersive spectroscopy (FESEM-EDS) and UV–visible spectroscopy. The photocatalytic performance of the fabricated ternary nanocomposite was tested against the photocatalytic degradation of crystal violet (CV) and rhodamine B (RhB) organic dyes under solar light irradiation. The ternary nanocomposite demonstrated about 99.05% and 97.38% degradation efficiency toward CV and RhB dyes under solar light irradiation in a time period of 105 min. The calculated rate constants (k, min−1) for degradation under solar light over the ZnO/CuO/Ag2O nanocomposite were 4.26 and 3.61 times higher than the k value obtained over ZnO nanoparticles for CV and RhB dyes, respectively. The main reactive species taking part in the photodegradation processes were •OH and •O2− over ZnO/CuO/Ag2O photocatalysts under solar light illumination. Furthermore, the recycle experiments confirmed good reusability and photo-stability of the ZnO/CuO/Ag2O ternary nanocomposite.

environmental sciences,engineering, environmental,water resources
Synthesis of three-component Cu2O/ZnO/Ag nanocrystal heterogeneous photocatalysts with high reactivity and stability for dye reduction

Chih-Wu Chiang,Chieh-Yu Lai,Su-Wen Hsu

DOI: https://doi.org/10.1039/d3ta05424a

IF: 11.9

2023-10-31

Journal of Materials Chemistry A

Abstract:Semiconductor nanocrystals are widely used as photocatalysts for the degradation of organic dye molecules due to their strong electron transfer ability and high catalytic reactivity. However, as a photocatalyst with excellent performance, semiconductor nanocrystals still have some disadvantages, such as aggregation, photocorrosion during the reactions, and loss during recycling that need to be addressed. In response to these problems, it is necessary to improve the using efficiency of "active charges" of the photocatalysts and their stability in the recycling process, which can be achieved by transferring the unreacted "active charges" to other active materials and fixing the photocatalysts in the polymer matrix. Here, we designed nanocrystals with three components, Cu 2 O–ZnO–AgNC (silver nanocube), as photocatalysts with high stability and high reactivity for the degradation of Congo red molecules under irradiation in the visible light range. The high reactivity of Cu 2 O–ZnO–AgNC as a photocatalyst can be attributed to the generation of "active charges", hot electrons from AgNC, and excited electron–hole pairs from Cu 2 O under visible light irradiation. Moreover, the photocorrosion of Cu 2 O can be suppressed by transferring the unreacted "active charges" to ZnO and the photocatalytic performance can be further improved. These results enable the design and synthesis of catalysts or photocatalysts with high catalytic performance for various reduction reactions.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Surface functionalized silver-doped ZnO nanocatalyst: a sustainable cooperative catalytic, photocatalytic and antibacterial platform for waste treatment

Sagar Vikal,Yogendra K Gautam,Swati Meena,Vijay Parewa,Ashwani Kumar,Ajay Kumar,Sushila Meena,Sanjay Kumar,Beer Pal Singh

DOI: https://doi.org/10.1039/d2na00864e

2023-01-04

Abstract:The different dyes used and discharged in industrial settings and microbial pathogenic issues have raised serious concerns about the content of bodies of water and the impact that dyes and microbes have on the environment and human health. Efficient treatment of contaminated water is thus a major challenge that is of great interest to researchers around the world. In the present work, we have fabricated functionalized silver-doped ZnO nanoparticles (Ag-doped ZnO NPs) via a hydrothermal method for wastewater treatment. X-ray photoelectron spectroscopy analysis confirmed the doping of Ag with ZnO NPs, and X-ray diffractometry analysis showed a decreasing trend in the crystallite size of the synthesized ZnO NPs with increased Ag concentration. Field emission scanning electron microscopy study of pure ZnO NPs and Ag-doped ZnO NPs revealed nanocrystal aggregates with mixed morphologies, such as hexagonal and rod-shaped structures. Distribution of Ag on the ZnO lattice is confirmed by high-resolution transmission electron microscopy analysis. ZnO NPs with 4 wt% Ag doping showed a maximum degradation of ∼95% in 1.5 h of malachite green dye (80 mg L-1) under visible light and ∼85% in 4 h under dark conditions. Up to five successive treatment cycles using the 4 wt% Ag-doped ZnO NP nanocatalyst confirmed its reusability, as it was still capable of degrading ∼86% and 82% of the dye under visible light and dark conditions, respectively. This limits the risk of nanotoxicity and aids the cost-effectiveness of the overall treatment process. The synthesized NPs showed antibacterial activity in a dose-dependent manner. The zone of inhibition of the Ag-doped ZnO NPs was higher than that of the pure ZnO NPs for all doping content. The studied Ag-doped ZnO NPs thus offer a significant eco-friendly route for the effective treatment of water contaminated with synthetic dyes and fecal bacterial load.
Ag NPs decorated C–TiO2/Cd0.5Zn0.5S Z-scheme heterojunction for simultaneous RhB degradation and Cr(VI) reduction

Yuhan Wang,Chunli Kang,Xinyang Li,Qing Hu,Chao Wang

DOI: https://doi.org/10.1016/j.envpol.2021.117305

IF: 8.9

2021-10-01

Environmental Pollution

Abstract:In this study, heterojunction photocatalysts, XAg@C-TCZ, based on MOF-derived C-TiO2 and Cd0.5Zn0.5S decorated with Ag nanoparticles (Ag NPs) were successfully synthesized through hydrothermal and calcination methods. The catalytic effectiveness of XAg@C-TCZ was evaluated by simultaneous photocatalytic degradation of rhodamine B (RhB) and reduction of Cr(VI) under simulated sunlight irradiation. The presence of the Z-scheme heterojunction was demonstrated through trapping experiments, X-ray photoelectron spectroscopy (XPS), time-resolved photoluminescence (PL) investigations, and electron spin resonance (ESR) spectroscopy. With an initial RhB and Cr(VI) concentration of 7 mg L-1 and 5 mg L-1, the catalyst 10Ag@C-TCZ achieved a simultaneous removal of 95.2% and 95.5% within 120 min, respectively. With the same catalyst, the degradation rate of RhB was 2.75 times higher and the reduction rate of Cr(VI) was 9.3 times higher compared to pure Cd0.5Zn0.5S. Total organic carbon (TOC) analysis confirmed the extent of mineralization of RhB, while the reduction of Cr(VI) was corroborated by XPS. Compared to pure RhB and Cr(VI) solutions, the reaction rates are smaller in the solution containing both contaminants, which is attributed to the competition for ·O2-. 10Ag@C-TCZ also exhibited a stable catalytic performance in tap water and lake water. This work provides a new perspective on the construction of heterojunctions with doped MOF derivatives for the purification of complex pollutant systems.

environmental sciences
Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

Matías H. Sosa Lissarrague,Sameer Alshehri,Abdullah Alsalhi,Verónica L. Lassalle,Ignacio López Corral

DOI: https://doi.org/10.1155/2023/2728305

2023-01-25

Abstract:The presence of heavy metals in wastewater, such as Ni, Pb, Cd, V, Cr, and Cu, is a serious environmental problem. This kind of inorganic pollutant is not biodegradable for several years, and its harmful effect is cumulative. Recently, semiconductor nanomaterials based on metal oxides have gained interest due to their efficiency in the removal of heavy metals from contaminated water, by inducing photocatalytic ion reduction when they absorb light of the appropriate wavelength. The most commonly applied semiconductor oxides for these purposes are titanium oxide (TiO2), zinc oxide (ZnO), and binary nanomaterials composed of both types of oxides. The main purpose of this work is to critically analyse the existent literature concerning this topic focusing specially in the most important factors affecting the adsorption or photocatalytic capacities of this type of nanomaterials. In particular, photocatalytic activity is altered by various factors, such as proportion of polymorphs, synthesis method, surface area, concentration of defects and particle size, among others. After a survey of the actual literature, it was found that, although these metal oxides have low absorption capacity for visible light, it is possible to obtain an acceptable heavy metal reduction performance by sensitization with dyes, doping with metallic or nonmetallic atoms, introduction of defects, or the coupling of two or more semiconductors.

engineering, chemical,chemistry, applied, physical
Upcycling of heavy metal adsorbents into sulfide semiconductors for photocatalytic CO2 reduction

Fei-Fei Chen,Yan Liang,Linnan Chen,Xiao Liang,Ya-Nan Feng,Jin Wu,Ying-Jie Zhu,Yan Yu

DOI: https://doi.org/10.1016/j.apsusc.2021.149647

IF: 6.7

2021-08-01

Applied Surface Science

Abstract:Although adsorption is regarded as a facile and efficient method to remove heavy metals from polluted water, the disposal of the spent adsorbents remains a great challenge. Here, an "adsorbent-to-photocatalyst" conversion strategy is reported. One-unit-cell calcium silicate hydrate (CSH) nanosheets (∼2.8 nm) are used as an ideal adsorbent, and four typical heavy metals including Cu2+, Zn2+, Co2+, and Cd2+ ions are selected for studies. CSH nanosheets show superiority in the ultrahigh specific surface area (577.8 m2 g–1) and chemical stability. After the heavy metal removal, the CSH nanosheets containing heavy metal ions are transformed into metal sulfides through in situ sulfurization treatment. Interestingly, in the case of Cd2+ ions, CdS nanoparticles are produced and well dispersed on the surface of CSH nanosheets. CSH-CdS has a narrow bandgap of 2.34 eV and shows the photoabsorption edge up to visible light (550 nm). Besides, CSH-CdS also possesses a suitable energy band structure, making itself an ideal photocatalyst for CO2 reduction under visible light (λ > 420 nm). The "adsorbent-to-photocatalyst" conversion strategy demonstrated here not only ameliorates the water and air pollution but also produces the valuable chemical feedstock (CO and H2)

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
On the diverse utility of Cu doped ZnS/Fe3O4 nanocomposites

Shirin Kalantari,Ali Shokuhfar

DOI: https://doi.org/10.1038/s41598-024-62611-0

IF: 4.6

2024-05-24

Scientific Reports

Abstract:The global water crisis is a growing concern, with water pollution from organic dyes being a significant issue. Photocatalysis has emerged as a sustainable and renewable method for removing organic pollutants from wastewater. The study synthesized innovative (2.5, 5 and 10 wt%) Cu doped zinc sulfide/iron oxide nanocomposites using a sonochemical method, which have versatile applications in adsorption and photocatalytic degradation of organic pollutants in wastewater. The nanocomposites underwent comprehensive characterization using powder X-ray diffraction, fourier-transform infrared spectroscopy, photoluminescence spectroscopy, Ultraviolet–Visible spectrophotometer, field emission scanning electron microscopy combined with energy dispersive X-ray spectroscopy and Mott–Schottky analysis. The synthesized samples demonstrate strong adsorption ability to remove RhB and MB dyes. Afterward, we evaluated their capability to degrade Rhodamine B (RhB) dye under UV light exposure. The greatest photocatalytic efficiency was noticed when employing a UV-C lamp in combination with the 10 wt% Cu doped ZnS/Fe 3 O 4 nanocomposite as photocatalyst (98.8% degradation after 60 min irradiation). The Langmuir–Hinshelwood model can be used to describe the pseudo first order kinetics of RhB dye photodegradation. The calculated ban gap values are 4.77, 4.67, and 4.55 eV, for (2.5, 5 and 10 wt%) Cu doped ZnS/Fe 3 O 4 , respectively. Furthermore, 10 wt% Cu doped ZnS/Fe 3 O 4 showed good recyclability, with a degradation rate of 89% even after five cycles. Consequently, prepared samples have outstanding photocatalytic activity and can be used as useful adsorbents in water purification.

multidisciplinary sciences
Enhanced photocatalytic degradation of textile dyeing wastewater under UV and visible light using ZnO/MgO nanocomposites as a novel photocatalyst

Bhaviya Raj R.,Umadevi M.,Parimaladevi R.

DOI: https://doi.org/10.1080/02726351.2019.1616863

IF: 2.628

2019-07-10

Particulate Science And Technology

Abstract:Textile industries utilize various toxic azo dyes that cause a hitch to all living organisms. To overcome such problem, the semiconductor photocatalysts are very much helpful. Zinc oxide (ZnO) nanoparticles (NPs), Magnesium oxide (MgO) NPs and Zinc oxide/Magnesium oxide nanocomposites (ZnO/MgO NCs) namely 0.9 M ZnO:0.1 M MgO, 0.7 M ZnO:0.3M MgO, and 0.5 M ZnO:0.5 M MgO NCs were synthesized by simple wet chemical method and used as an effective photocatalyst for the degradation of toxic and harmful organic dye present in textile dyeing wastewater. The average crystallite sizes for the ZnO/MgO NCs were 31 nm, 30 nm, and 29 nm. The energy band gap (Eg) for the NCs was estimated as 3.7eV, 4 eV, and 4.4eV using Tauc's plot. Uniform, flaky and porous morphology of the ZnO/MgO NCs were observed in the scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The 0.5 M ZnO:0.5 M MgO NCs with textile dyeing wastewater under UV light of 254 nm and visible light irradiation showed superior photocatalytic degradation with the rate constant of 0.005/min and 0.0008/min respectively. Furthermore, they showed good antibacterial activity against Staphylococcus aureus and Escherichia coli with 7 mm and 6 mm of inhibition zone. This study suggests that ZnO/MgO NCs can serve as an ideal commercial pollutant degradation method.

engineering, chemical
Solar Light Assisted Metal Selenide-Chitosan Nanoparticles from Structure Tailoring to Photocatalytic Mineralization of Selected Industrial Dyes

DOI: https://doi.org/10.1007/s11270-024-07156-8

2024-06-05

Water Air & Soil Pollution

Abstract:Both human health and aquatic environments are at risk of contamination by industrial wastewater. These contaminants, which are hazardous organic dye pollutants, can cause extreme harm if not addressed effectively. Therefore, addressing the degradation of hazardous organic dye pollutants is crucial. Using the co-precipitation technique, manganese nickel selenide-chitosan nanoparticles (MnNiSeCs-NPs) were prepared. The fabrication of the nanocomposites was verified by FTIR study. Using the SEM method, the average particle size was measured to be 74 nm. The elemental composition of the nanocomposites was further studied using EDX, which demonstrated the existence of Se, Mn, and Ni in the nanocomposite. For determining the crystalline structure, XRD was utilized, and the measured crystallite size was 24.2 nm. The photocatalyst exhibited a reduced bandgap of 2.3 eV. When subjected to sunlight irradiation by optimizing the reaction conditions, including a 75-min duration, 40 ppm dye solution of pH 7, and 0.1 g photocatalyst dosage, effective photodegradation of Alizarin red dye upto 98% was attained using the synthesized MnNiSeCs-NPs. Likewise, 96% degradation of tartrazine dye was accomplished with the same optimum parameters of time, pH, and ppm while only increasing the catalyst dosage to 0.2 g. Both reactions follow pseudo-first-order kinetic principles. Notably, the MnNiSeCs-NP catalyst exhibited recyclability in four sequential batches. These findings indicate that the MnNiSeCs-NPs are extremely efficient, economically viable, and useful photocatalysts for reducing pollutants in industrial effluent with great environmental remediation potential.

environmental sciences,water resources,meteorology & atmospheric sciences
Facile Solution‐Processed Semiconductor/Metal Hybrid Nanoporous Materials; their Highly Photoredox Catalytic Power

Mujahid Mustaqeem,Gowhar A. Naikoo,Naveed Ahmad,Pi‐Tai Chou,Yang‐Fang Chen

DOI: https://doi.org/10.1002/admt.202300915

IF: 6.8

2023-09-05

Advanced Materials Technologies

Abstract:A facile solution processed strategy is utilized to create semiconductor/metal hybrid nanoporous (CuO‐Ag) materials with high surface area and greater porosity, improves activity significantly, and offers a facile guideline for targeting photoredox catalysis applications. The improved semiconductor/metal hybrid surface area and porosity substantially enhance the photocatalytic efficiency (i.e., ≈99% degradation of RhB and 4‐NP), owing to the synergy effect. Designing a photoredox material with highly efficient organic pollutant degradation ability and cost effectiveness is challenging. Conventional photoredox materials have inherent drawbacks, including high cost, low photon‐to‐electron conversion rates, and low effective surface area. Herein, an alternative nanoporous semiconductor/metal hybrid (CuO‐Ag) photoredox catalysis material with all solution processes is developed to circumvent these shortcomings. The obtained results evidently indicate that the loading of Ag onto the CuO nanoporous material leads to improving the Brunauer–Emmett–Teller (BET) specific surface area (48.369 m2 g−1) with pore size (36.436 nm) and pore's volume (0.301 cm3 g−1) of CuO‐Ag nanoporsity. The improved semiconductor/metal hybrid surface area and porosity significantly enhance the photocatalytic efficiency (i.e., ≈99% degradation of RhB and 4‐NP), owing to the synergy effect. Additionally, the decoration of metal nanostructure enables to enhance photo‐absorption and the semiconductor/metal heterojunction is useful to enhance photo‐excited electron and hole charge carriers separation. Such structure‐designed CuO‐Ag nanoporous materials maintain high photostability during long light irradiation conditions. The photocatalytic efficiency is better than all published reports. This strategy using hybrid semiconductor/metal nanoporous material with high surface area and greater porosity improved activity significantly offers a facile guideline for targeting photoredox catalysis applications.

materials science, multidisciplinary
Facile fabrication of Au@CoFe2O4-ZnO hybrid plasmonic nanostructures with enhanced photocatalytic performance

Mohapatra, Satyabrata

DOI: https://doi.org/10.1007/s10854-024-13359-w

2024-08-23

Journal of Materials Science Materials in Electronics

Abstract:Multicomponent hybrid nanostructures exhibit multifunctional properties and synergistic performance which make them attractive materials for environmental applications. We have fabricated magnetic Au@CoFe 2 O 4 -ZnO hybrid plasmonic nanostructures using simple wet chemical route combined with photodeposition and studied their photocatalytic performance towards decomposition of synthetic dyes. XRD, FESEM and Raman were used to examine the structure and morphology of the prepared nanostructures and UV–visible spectroscopy was used for photocatalytic measurements. The solar-responsive photocatalytic decomposition of synthetic dyes MB and MO was examined and results displayed the outstanding performance of Au loaded CoFe 2 O 4 -ZnO nanostructures over CoFe 2 O 4 -ZnO photocatalysts. The prepared Au@CoFe 2 O 4 -ZnO hybrid nanostructures with higher Au loading, the sample CU3, effectively decolorized MB dye in only 20 min of sunlight exposure, achieving an apparent rate constant of 0.062 min −1 . For MO dye, the sample CU3 achieved 96.6% degradation in 60 min with an apparent rate constant of 0.022 min −1 . Mechanistic studies related to radicals responsible for the photodecomposition were discussed and results revealed that ⋅OH radicals and hot holes play major roles in photodecomposition of pollutants. Overall, Au decorated CoFe 2 O 4 -ZnO nanostructures prepared using facile photodecomposition route with excellent recyclability and effortless magnetic recovery represent a promising photocatalyst material and is highly suitable photocatalyst for environmental remediation applications.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Environmental remediation of real textile dyeing wastewater under visible light and inactivation of pathogenic bacteria using ZnO/CuO nano‐needles

Bhaviya Raj Ramaraj,Umadevi Mahalingam,Parimaladevi Ramasamy,Joshua M Pearce,Jeyanthinath Mayandi,Anuratha Mahalingam

DOI: https://doi.org/10.1002/pssa.202200607

2023-03-03

physica status solidi (a) - applications and materials science

Abstract:Textile industries have an immense existence in a country's economy. Large quantity of water is consumed by textile dyeing industries and produces volumes of wastewater. Treating these hazardous effluents to make them environmental‐friendly, using nano‐catalysts is the best promising method. Metal oxide nanomaterials have emerged as an important tool for environmental remediation. Herein the hydrothermally synthesized eco‐friendly and low‐cost zinc oxide/copper oxide nanocomposites (ZnO/CuO NCs) with different proportions of binary oxides are evaluated for the applications of degrading organic pollutants and antibacterial activity. The influence of doping was also studied in structural, optical, morphological, photocatalytic and antibacterial activities. Presence of CuO in NCs affirms the formation of ZnO/CuO NCs. Photodegradation of Congo Red (CR) and real textile dyeing wastewater (TDW) under visible light irradiation by 0.5M ZnO:0.5M CuO NCs revealed them to act as a perfect catalyst by tuning doping‐concentration of Cu in ZnO, with 1.9x10‐3/min and 5.4x10‐3/min rate constant. Hybrid nanocomposite materials exhibit high antibacterial activity against S. aureus and E. coli with 5mm and 6mm inhibition zone. The experimental characteristics of NCs are explained by combination of electronic band structure due to size effect and tuning metal oxide proportions in comparison to that of pure metal oxide. This article is protected by copyright. All rights reserved.
Tuning of metal oxides photocatalytic performance using Ag nanoparticles integration

Hassan Karimi-Maleh,Baskaran Ganesh Kumar,Saravanan Rajendran,Jiaqian Qin,S. Vadivel,D. Durgalakshmi,F. Gracia,Matias Soto-Moscoso,Yasin Orooji,Fatemeh Karimi

DOI: https://doi.org/10.1016/j.molliq.2020.113588

IF: 6

2020-09-01

Journal of Molecular Liquids

Abstract:Water contamination is increasingly an important issue in developing and under developed countries. The main cause of water contaminations are industrial dyes and toxic chemicals. Hence many technologies are being developed to de-contaminate the toxic materials. The photocatalytic de-contamination of dyes is an effective and simple technology to purify water. Among various photocatalysts, the transition metal based oxides (TiO2, NiO and ZnO) being the state-of art photocatalytic material. But, the metal oxides have large band gap and suffers from the fact that it predominantly absorbs the Ultra Violet region of irradiation. But, any viable photocatalytic technology demands absorption in the visible light region, so as to utilize the cost-free sun light. Herein, we tune and utilize the metal oxides through the integration of Ag metal nanoparticles. The synthesized materials were completely analyzed by PXRD, HRTEM, UV, XPS and BET instruments. All TiO2/Ag, NiO/Ag and ZnO/Ag nanocomposites were subjected to photocatalytic degradation using visible light. The nanocomposites acted as photocatalyst and degrade the colorful methyl orange and colorless toxic 4-chlorophenol. Among the aforementioned three samples, TiO2/Ag exhibited best performance than ZnO/Ag and NiO/Ag. We attributed the enhancement of photocatalytic activity due to Plasmons assistance and nanoscale regime of photocatalyst. In summary, we tuned the metal oxide photocatalytic performance using the Ag nanoparticle surface Plasmon resonance.

chemistry, physical,physics, atomic, molecular & chemical
Structural, Optical, and Renewable Energy-Assisted Photocatalytic Dye Degradation Studies of ZnO, CuZnO, and CoZnO Nanostructures for Wastewater Treatment

Awais Khalid,Pervaiz Ahmad,Roomia Memon,Lamyaa F. Gado,Mayeen Uddin Khandaker,Hanadi A. Almukhlifi,Yosra Modafer,Najma Bashir,Otman Abida,Fahdah Ayed Alshammari,Abdelmajid Timoumi

DOI: https://doi.org/10.3390/separations10030184

2023-03-08

Separations

Abstract:Renewable energy can be harnessed from wastewater, whether from municipalities or industries, but this potential is often ignored. The world generates over 900 km3 of wastewater annually, which is typically treated through energy-consuming processes, despite its potential for energy production. Environmental pollution is a most important and serious issue for all and their adulterations to the aquatic system are very toxic in very low concentrations. Photocatalysis is a prominent approach to eliminating risky elements from the environment. The present study developed Zinc oxide (ZnO), Copper-doped Zinc oxide (CuZnO), and Cobalt-doped Zinc oxide (CoZnO) nanostructures (NSs) by facile hydrothermal route. The crystalline and structural stability of the synthesized nanostructures were evident from XRD and FESEM analysis. Metal, and oxygen bond and their interaction on the surfaces and their valency were explored from XPS spectra. Optical orientations and electron movements were revealed from UV-Visible analysis. After 100 min exposure time with 1 g of catalyst concentration 60%, 70%, and 89% of dye degraded, for dye concentration (5 mg/L to 50 mg/L), the huge variation observed (70% to 22%), (80% to 16%), (94% to 10%). The highest photodegradation rate (55%, 75%, 90%) was observed on pH~12 using ZnO, CoZnO, and CuZnO respectively. Photodegradation of methylene blue confirmed the largest surface area, rate of recombination, photo-excited charge carriers, photo-sensitivity range, and radical generations of ZnO, CuZnO, and CoZnO. The present study, therefore, suggested that CuZnO would be preferred to produce nanomaterials for industrial wastewater treatment like methylene.

chemistry, analytical
Ag-Li-ZnO nanostructures for efficient photocatalytic degradation of organic dyes and textile wastewater under visible light treatment

Keshavulu Masula,Ranjith Kore,Yadagiri Bhongiri,Someshwar Pola,Manohar Basude

DOI: https://doi.org/10.1016/j.molstruc.2024.137750

IF: 3.841

2024-02-19

Journal of Molecular Structure

Abstract:The study describes the preparation and characterization of pure ZnO, Li-ZnO (LZO), Ag-ZnO (AZO) and Ag-Li-ZnO (ALZO) nanostructures by sol-gel method, followed by their application as photocatalysts for the degradation of dyes acid red (AR1), mordant orange (MO1) and textile wastewater (TWW) under irradiation of visible light. The ALZO composite showed the highest photocatalytic efficiency among the tested samples with 95% degradation of dyes, which was three times higher than that of pure ZnO. The degradation reaction followed pseudo-first-order kinetics and the control trapping experiments corroborated the reactive species are hydroxyl radicals. The study also investigated the influence of various operational parameters on the photodegradation of dyes. The high photocatalytic efficiency of the ALZO material is mainly due to its highly porous structure with greater surface area, enhanced absorption of visible light, and a decreased recombination rate of electron-hole pairs. The ALZO catalyst had a band gap energy of 2.82 eV and exhibited the wurtzite ZnO hexagonal phase. The study highlights the effectiveness of doping metal oxides into semiconductor oxides to enhance photocatalytic activity and suggests the potential of the ALZO composite as a promising photocatalyst for dye degradation.

chemistry, physical

Increased eggshell thickness in domestic fowls after administration of the antiprogesterone RU 38486 (Mifepristone).

Ag–CuO–ZnO Metal–semiconductor Multiconcentric Nanotubes for Achieving Superior and Perdurable Photodegradation

Facile fabrication of a Z-scheme g-C 3 N 5 /Gd-MOF/silver nanocube composite as a new generation visible light active photocatalyst for abatement of persistent toxic pollutants

Enhancement in Visible Light-Responsive Photocatalytic Activity by Embedding Cu-doped ZnO Nanoparticles on Multi-Walled Carbon Nanotubes

A novel ZnS-CdS nanocomposite as a visible active photocatalyst for degradation of synthetic and real wastewaters

Enhanced synergistic catalysis of novel Ag2O/CuO nanosheets under visible light illumination for the photodecomposition of three dyes

Facile synthesis of ZnO/CuO/Ag2O ternary metal oxide nanocomposite for effective photodegradation of organic water pollutants

Synthesis of three-component Cu2O/ZnO/Ag nanocrystal heterogeneous photocatalysts with high reactivity and stability for dye reduction

Surface functionalized silver-doped ZnO nanocatalyst: a sustainable cooperative catalytic, photocatalytic and antibacterial platform for waste treatment

Ag NPs decorated C–TiO2/Cd0.5Zn0.5S Z-scheme heterojunction for simultaneous RhB degradation and Cr(VI) reduction

Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

Upcycling of heavy metal adsorbents into sulfide semiconductors for photocatalytic CO2 reduction

On the diverse utility of Cu doped ZnS/Fe3O4 nanocomposites

Enhanced photocatalytic degradation of textile dyeing wastewater under UV and visible light using ZnO/MgO nanocomposites as a novel photocatalyst

Solar Light Assisted Metal Selenide-Chitosan Nanoparticles from Structure Tailoring to Photocatalytic Mineralization of Selected Industrial Dyes

Facile Solution‐Processed Semiconductor/Metal Hybrid Nanoporous Materials; their Highly Photoredox Catalytic Power

Facile fabrication of Au@CoFe2O4-ZnO hybrid plasmonic nanostructures with enhanced photocatalytic performance

Environmental remediation of real textile dyeing wastewater under visible light and inactivation of pathogenic bacteria using ZnO/CuO nano‐needles

Tuning of metal oxides photocatalytic performance using Ag nanoparticles integration

Structural, Optical, and Renewable Energy-Assisted Photocatalytic Dye Degradation Studies of ZnO, CuZnO, and CoZnO Nanostructures for Wastewater Treatment

Ag-Li-ZnO nanostructures for efficient photocatalytic degradation of organic dyes and textile wastewater under visible light treatment