[Guanethidine (Ismelin) in bathmotropic disorders of heart rhythm].

L. Ceremużyński

Abstract:

What problem does this paper attempt to address?

MetalWalls: A Classical Molecular Dynamics Software Dedicated to the Simulation of Electrochemical Systems

Abel Marin-Laflèche,Matthieu Haefele,Laura Scalfi,Alessandro Coretti,Thomas Dufils,Guillaume Jeanmairet,Stewart Reed,Alessandra Serva,Roxanne Berthin,Camille Bacon,Sara Bonella,Benjamin Rotenberg,Paul Anthony Madden,Mathieu Salanne

DOI: https://doi.org/10.26434/chemrxiv.12389777.v1

2020-06-02

Abstract:Applied electrochemistry plays a key role in many technologies, such as Li-ion batteries, fuel cells, supercapacitors, solar cells, etc. It is therefore at the core of many research programs all over the world. However, fundamental electrochemical investigations remain scarce. In particular, electrochemistry is among the fields for which the gap between theory and experiment is the largest. From the computational point of view, there is no classical molecular dynamics (MD) software devoted to the simulation of electrochemical systems while other fields such as biochemistry or material science have dedicated tools. "MetalWalls" (MW), a MD code dedicated to electrochemistry, fills this gap. Its main originality is the inclusion of a series of methods which allow a constant electrical potential to be applied to the electrode materials. It also allows the simulation of bulk liquids or solids using the polarizable ion model and the aspherical ion model. MW is designed to be used on high-performance computers and it has already been employed in a number of scientific publications. It was for example used to study the charging mechanism of supercapacitors, nanoelectrowetting and water desalination devices.
Accelerating QM/MM simulations of electrochemical interfaces through machine learning of electronic charge densities

Andrea Grisafi,Mathieu Salanne

2024-05-13

Abstract:A crucial aspect in the simulation of electrochemical interfaces consists in treating the distribution of electronic charge of electrode materials that are put in contact with an electrolyte solution. Recently, it has been shown how a machine-learning method that specifically targets the electronic charge density, also known as SALTED, can be used to predict the long-range response of metal electrodes in model electrochemical cells. In this work, we provide a full integration of SALTED with MetalWalls, a program for performing classical simulations of electrochemical systems. We do so by deriving a spherical harmonics extension of the Ewald summation method, which allows us to efficiently compute the electric field originated by the predicted electrode charge distribution. We show how to use this method to drive the molecular dynamics of an aqueous electrolyte solution under the quantum electric field of a gold electrode, which is matched to the accuracy of density-functional theory. Notably, we find that the resulting atomic forces present a small error of the order of 1 meV/Å, demonstrating the great effectiveness of adopting an electron-density path in predicting the electrostatics of the system. Upon running the data-driven dynamics over about 3 ns, we observe qualitative differences in the interfacial distribution of the electrolyte with respect to the results of a classical simulation. By greatly accelerating quantum-mechanics/molecular-mechanics approaches applied to electrochemical systems, our method opens the door to nanoseconds timescales in the accurate atomistic description of the electrical double layer.

Materials Science
Molecular Simulation of Electrode-Solution Interfaces

Laura Scalfi,Mathieu Salanne,Benjamin Rotenberg

DOI: https://doi.org/10.1146/annurev-physchem-090519-024042

2021-04-20

Annual Review of Physical Chemistry

Abstract:Many key industrial processes, from electricity production, conversion, and storage to electrocatalysis or electrochemistry in general, rely on physical mechanisms occurring at the interface between a metallic electrode and an electrolyte solution, summarized by the concept of an electric double layer, with the accumulation/depletion of electrons on the metal side and of ions on the liquid side. While electrostatic interactions play an essential role in the structure, thermodynamics, dynamics, and reactivity of electrode-electrolyte interfaces, these properties also crucially depend on the nature of the ions and solvent, as well as that of the metal itself. Such interfaces pose many challenges for modeling because they are a place where quantum chemistry meets statistical physics. In the present review, we explore the recent advances in the description and understanding of electrode-electrolyte interfaces with classical molecular simulations, with a focus on planar interfaces and solvent-based liquids, from pure solvent to water-in-salt electrolytes.

chemistry, physical
Molecular dynamics simulations of electrified interfaces including the metal polarisation

Samuel Ntim,Marialore Sulpizi

DOI: https://doi.org/10.1039/d3cp01472j

2023-08-30

Abstract:Understanding electrified interfaces requires an accurate description of the electric double layer which also takes into account the metal polarisation. Here we present a simple approach to the molecular dynamics simulation of electrified interfaces which combines fixed charges and a core-shell model for the description of the polarisable electron density on the metal electrode. The approach has been applied to the Au(111) surface in contact with a NaCl aqueous electrolyte solution in order to calculate the differential capacitance and to gain a detailed picture of the charging mechanism. Metal polarisation enhances the interfacial capacitance with a difference between the cathode and anode. In particular, we find that the influence of the metal polarisation on the electric double layer depends on the ion's solvation shell structure and, for the investigated interface, is more important at the cathode, where it modifies the sodium ion distribution.
PiNNwall: Heterogeneous Electrode Models from Integrating Machine Learning and Atomistic Simulation

Thomas Dufils,Lisanne Knijff,Yunqi Shao,Chao Zhang

DOI: https://doi.org/10.1021/acs.jctc.3c00359

2023-10-01

Abstract:Electrochemical energy storage always involves the capacitive process. The prevailing electrode model used in the molecular simulation of polarizable electrode-electrolyte systems is the Siepmann-Sprik model developed for perfect metal electrodes. This model has been recently extended to study the metallicity in the electrode by including the Thomas-Fermi screening length. Nevertheless, a further extension to heterogeneous electrode models requires introducing chemical specificity, which does not have any analytical recipes. Here, we address this challenge by integrating the atomistic machine learning code (PiNN) for generating the base charge and response kernel and the classical molecular dynamics code (MetalWalls) dedicated to the modeling of electrochemical systems, and this leads to the development of the PiNNwall interface. Apart from the cases of chemically doped graphene and graphene oxide electrodes as shown in this study, the PiNNwall interface also allows us to probe polarized oxide surfaces in which both the proton charge and the electronic charge can coexist. Therefore, this work opens the door for modeling heterogeneous and complex electrode materials often found in energy storage systems.

Materials Science,Chemical Physics
Molecular dynamics simulations of metal-electrolyte interfaces under potential control

Linnéa Andersson,Chao Zhang

DOI: https://doi.org/10.1016/j.coelec.2023.101407

IF: 8.5

2023-12-01

Current Opinion in Electrochemistry

Abstract:The interfaces between metal electrodes and liquid electrolytes are prototypical in electrochemistry. That is why it is crucial to have a molecular and dynamical understating of such interfaces for both electrical properties and chemical reactivities under potential control. In this short review, we will categorize different schemes for modeling electrified metal-electrolyte interfaces used in molecular dynamics simulations. Our focus is on the similarities between seemingly different methods and their conceptual connections in terms of relevant electrochemical quantities. Therefore, it can be used as a guideline for developing new methods and building modularized computational protocols for simulating electrified interfaces.

chemistry, physical,electrochemistry,materials science, multidisciplinary
Water at an electrochemical interface - a simulation study

Adam P. Willard,Stewart K. Reed,Paul A. Madden,David Chandler

DOI: https://doi.org/10.1039/B805544K

2008-04-19

Abstract:The results of molecular dynamics simulations of the properties of water in an aqueous ionic solution close to an interface with a model metallic electrode are described. In the simulations the electrode behaves as an ideally polarizable hydrophilic metal, supporting image charge interactions with charged species, and it is maintained at a constant electrical potential with respect to the solution so that the model is a textbook representation of an electrochemical interface through which no current is passing. We show how water is strongly attracted to and ordered at the electrode surface. This ordering is different to the structure that might be imagined from continuum models of electrode interfaces. Further, this ordering significantly affects the probability of ions reaching the surface. We describe the concomitant motion and configurations of the water and ions as functions of the electrode potential, and we analyze the length scales over which ionic atmospheres fluctuate. The statistics of these fluctuations depend upon surface structure and ionic strength. The fluctuations are large, sufficiently so that the mean ionic atmosphere is a poor descriptor of the aqueous environment near a metal surface. The importance of this finding for a description of electrochemical reactions is examined by calculating, directly from the simulation, Marcus free energy profiles for transfer of charge between the electrode and a redox species in the solution and comparing the results with the predictions of continuum theories. Significant departures from the electrochemical textbook descriptions of the phenomenon are found and their physical origins are characterized from the atomistic perspective of the simulations.

Statistical Mechanics
(Invited) Study of Electrochemical Interfaces Using DFT and the Classical Liquid Theory Hybrid Simulations

Minoru Otani

DOI: https://doi.org/10.1149/ma2023-025864mtgabs

2023-12-22

ECS Meeting Abstracts

Abstract:Understanding the properties of electrochemical interfaces leads to improving the efficiency and durability of energy and structural materials such as secondary batteries, fuel cells, catalysts, and corrosion. First-principles calculations based on the density functional theory (DFT) are useful simulation technique to those materials and are widely used to understand physicochemical phenomena such as charge and electron transfer and reaction kinetics. However, the simulation costs for the full DFT calculation are quite large. Thus, we need to reduce it to obtain as many results as possible within the limited calculation resources. Combining the DFT and the classical liquid theory is one of a possible way to reduce the costs. We have been developed a series of simulation techniques to hybridize the DFT and the reference interaction site model (RISM) [1-4]. In the presentation, after providing a brief introduction of our simulation technique, we will show the simulation results for electrolyte decompositions and battery degradation [5], a confined effect of water molecule in the MXene electrode [6], and a water dissociation reaction on Cu surface using an automated reaction path search method [7,8]. References: Otani and O. Sugino, Phys. Rev. B, 73 , 115407 (2006). Bonnet, T. Morishita, O. Sugino, and M. Otani, Phys. Rev. Lett., 109 , 266101, (2012). Nishihara and M. Otani, Phys. Rev. B, 96 , 115429 (2017). Haruyama, T. Ikeshoji, and M. Otani, Phys. Rev. Mater., 2 , 095801 (2018). Hagiwara, J. Haruyama, M. Otani, Y. Umemura, T. Takeuchi and H. Sakaebe, Electrochemistry, 90 , 107002 (2022). Sugahara, Y. Ando, S. Kajiyama, K. Yazawa, K. Gotoh, M. Otani, M. Okubo, A. Yamada, Nat. Commun., 10 850, (2019). S. Maeda, K. Ohio, and K. Morokuma, Phys. Chem. Chem. Phys. 15 , 3683 (2013) Hasegawa, S. Hagiwara, M. Otani, and S. Maeda, submitted to J. Phys. Chem. Lett.
Polarizable Potentials For Metals: The Density Readjusting Embedded Atom Method (DR-EAM)

Hemanta Bhattarai,Kathie E. Newman,J. Daniel Gezelter

DOI: https://doi.org/10.1103/PhysRevB.99.094106

2019-03-31

Abstract:In simulations of metallic interfaces, a critical aspect of metallic behavior is missing from the some of the most widely used classical molecular dynamics force fields. We present a modification of the embedded atom method (EAM) which allows for electronic polarization of the metal by treating the valence density around each atom as a fluctuating dynamical quantity. The densities are represented by a set of additional fluctuating variables (and their conjugate momenta) which are propagated along with the nuclear coordinates. This ``density readjusting EAM'' (DR-EAM) preserves nearly all of the useful qualities of traditional EAM, including bulk elastic properties and surface energies. However, it also allows valence electron density to migrate through the metal in response to external perturbations. We show that DR-EAM can successfully model polarization in response to external charges, capturing the image charge effect in atomistic simulations. DR-EAM also captures some of the behavior of metals in the presence of uniform electric fields, predicting surface charging and shielding internal to the metal. We further show that it predicts charge transfer between the constituent atoms in alloys, leading to novel predictions about unit cell geometries in layered L$1_0$ structures.

Materials Science,Chemical Physics,Computational Physics
Electronic Structure Modeling of Electrochemical Reactions at Electrode/Electrolyte Interfaces in Lithium Ion Batteries

Kevin Leung

DOI: https://doi.org/10.1021/jp308929a

2013-04-22

Abstract:We review recent ab initio molecular dynamics studies of electrode/electrolyte interfaces in lithium ion batteries. Our goals are to introduce experimentalists to simulation techniques applicable to models which are arguably most faithful to experimental conditions so far, and to emphasize to theorists that the inherently interdisciplinary nature of this subject requires bridging the gap between solid and liquid state perspectives. We consider liquid ethylene carbonate (EC) decomposition on lithium intercalated graphite, lithium metal, oxide-coated graphite, and spinel manganese oxide surfaces. These calculations are put in the context of more widely studied water-solid interfaces. Our main themes include kinetically controlled two-electron-induced reactions, the breaking of a previously much neglected chemical bond in EC, and electron tunneling. Future work on modeling batteries at atomic lengthscales requires capabilities beyond state-of-the-art, which emphasizes that applied battery research can and should drive fundamental science development.

Materials Science
Simulations of Coulomb systems with slab geometry using an efficient 3d Ewald summation method

Alexandre P. dos Santos,Matheus Girotto,Yan Levin

DOI: https://doi.org/10.1063/1.4945560

2018-01-18

Abstract:We present a new approach to efficiently simulate electrolytes confined between infinite charged walls using a 3d Ewald summation method. The optimal performance is achieved by separating the electrostatic potential produced by the charged walls from the electrostatic potential of electrolyte. The electric field produced by 3d periodic images of the plates is constant, with the field produced by the transverse images of the charged plates canceling out. We show that under suitable renormalization, the non-neutral electrolyte confined between charged plates can be simulated using 3d Ewald summation with a correction that accounts for the conditional convergence of the resulting lattice sum. The new algorithm is at least an order of magnitude more rapid than the usual simulation methods for the slab geometry and can be further sped up by adopting Particle-Particle Particle-Mesh (P 3 M ) approach.

Soft Condensed Matter
Molecular dynamics simulations of electrochemical interfaces

Liang Zeng,Jiaxing Peng,Jinkai Zhang,Xi Tan,Xiangyu Ji,Shiqi Li,Guang Feng

DOI: https://doi.org/10.1063/5.0160729

IF: 4.304

2023-09-06

The Journal of Chemical Physics

Abstract:Molecular dynamics (MD) simulations have become a powerful tool for investigating electrical double layers (EDLs), which play a crucial role in various electrochemical devices. In this Review, we provide a comprehensive overview of the techniques used in MD simulations for EDL studies, with a particular focus on methods for describing electrode polarization, and examine the principle behind these methods and their varying applicability. The applications of these approaches in supercapacitors, capacitive deionization, batteries, and electric double-layer transistors are explored, highlighting recent advancements and insights in each field. Finally, we emphasize the challenges and potential directions for future developments in MD simulations of EDLs, such as considering movable electrodes, improving electrode property representation, incorporating chemical reactions, and enhancing computational efficiency to deepen our understanding of complex electrochemical processes and contribute to the progress in the field involving EDLs.

chemistry, physical,physics, atomic, molecular & chemical
Integrating Experiment with Theory to Determine the Structure of Electrode-Electrolyte Interfaces

Lalith Krishna Samanth Bonagiri,Amir Farokh Payam,Narayana R. Aluru,Yingjie Zhang

2024-09-16

Abstract:Electrode-electrolyte interfaces are crucial for electrochemical energy conversion and storage. At these interfaces, the liquid electrolytes form electrical double layers (EDLs). However, despite more than a century of active research, the fundamental structure of EDLs remains elusive to date. Experimental characterization and theoretical calculations have both provided insights, yet each method by itself only offers incomplete or inexact information of the multifaceted EDL structure. Here we provide a survey of the mainstream approaches for EDL quantification, with a particular focus on the emerging 3D atomic force microscopy (3D-AFM) imaging which provides real-space atomic-scale EDL structures. To overcome the existing limits of EDL characterization methods, we propose a new approach to integrate 3D-AFM with classical molecular dynamics (MD) simulation, to enable realistic, precise, and high-throughput determination and prediction of EDL structures. As examples of real-world application, we will discuss the feasibility of using this joint experiment-theory method to unravel the EDL structure at various carbon-based electrodes for supercapacitors, batteries, and electrocatalysis. Looking forward, we believe 3D-AFM, future versions of scanning probe microscopy, and their integration with theory offer promising platforms to profile liquid structures in many electrochemical systems.

Chemical Physics
Computer simulations of ionic liquids at electrochemical interfaces

Céline Merlet,Benjamin Rotenberg,Paul Madden,Mathieu Salanne

DOI: https://doi.org/10.1039/C3CP52088A

2013-09-17

Abstract:Ionic liquids are widely used as electrolytes in electrochemical devices. In this context, many experimental and theoretical approaches have been recently developed for characterizing their interface with electrodes. In this perspective article, we review the most recent advances in the field of computer simulations (mainly molecular dynamics). A methodology for simulating electrodes at constant electrical potential is presented. Several types of electrode geometries have been investigated by many groups in order to model planar, corrugated and porous materials and we summarize the results obtained in terms of the structure of the liquids. This structure governs the quantity of charge which can be stored at the surface of the electrode for a given applied potential, which is the relevant quantity for the highly topical use of ionic liquids in supercapacitors (also known as electrochemical double-layer capacitors). A key feature, which was also shown by atomic force microscopy and surface force apparatus experiments, is the formation of a layered structure for all ionic liquids at the surface of planar electrodes. This organization cannot take place inside nanoporous electrodes, which results in a much better performance for the latter in supercapacitors. The agreement between simulations and electrochemical experiments remains qualitative only though, and we outline future directions which should enhance the predictive power of computer simulations. In the longer term, atomistic simulations will also be applied to the case of electron transfer reactions at the interface, enabling the application to a broader area of problems in electrochemistry, and the few recent works in this field are also commented upon.

Materials Science,Chemical Physics
A Simple and Efficient Lattice Summation Method for Metallic Electrodes in Constant Potential Molecular Dynamics Simulation

Haoyu Li,Peiyao Wang,Jefferson Zhe Liu,Gengping Jiang

DOI: https://doi.org/10.48550/arXiv.2111.06704

2022-05-03

Abstract:The constant potential molecular dynamics simulation method proposed by Siepmann and Sprik and reformulated later by Reed (SR-CPM) has been widely employed to investigate the metallic electrolyte/electrode interfaces, especially for conducting nanochannels with complex connectivity, *e.g.*, carbide-derived carbon or graphene-assembled membrane. This work makes substantial extensions of this seminal SR-CPM approach. First, we introduce two numerical techniques to determine electrode atom charges with an order of magnitude improvement in computational efficiency compared with those widely employed methods. The first numerical technique dramatically accelerates the to calculation of the Ewald interaction matrix $\mathbf{E}$, which takes advantage of the existing highly optimised electrostatic codes. The second technique introduces a new preconditioning technique in the conjugate gradient method to considerably increase the computational efficiency of a linear equation system that determines electrode atomic charges. Our improved SR-CPM implemented in the LAMMPS package can handle extra-large systems, *e.g.*, over 8.1 million electrode atoms. Second, after demonstrating the importance of the electroneutrality constraint, we propose a two-step method to enforce electroneutrality in the following post-treatment step, applicable for matrix and iterative techniques. Third, we propose a solid theoretical analysis for the adjustable parameter $\alpha_i$ (namely the atomic Hubbard-U $U_i^0$), which is arbitrarily selected in many SR-CPM simulation practices. We proposed that the optimised $\alpha_i$ or $U_i^0$ should compensate for the electrical potential/energy discrepancy between the discrete atomistic model and the continuum limit. The analytical and optimal ${\alpha}_i^0$ values are derived for a series of 2D materials.

Chemical Physics,Materials Science
Advancement of the Homogeneous Background Method for the Computational Simulation of Electrochemical Interfaces

Arthur Hagopian,Marie-Liesse Doublet,Jean-Sébastien Filhol,Tobias Binninger

DOI: https://doi.org/10.1021/acs.jctc.1c01237

2022-01-13

Abstract:Computational studies of electrochemical interfaces based on density-functional theory (DFT) play an increasingly important role in present research on electrochemical processes for energy conversion and storage. The homogeneous background method (HBM) offers a straightforward approach to charge the electrochemical system within DFT simulations, but it typically requires the specification of the "active" fraction of excess electrons based on a certain choice of the electrode-electrolyte boundary location, which can be difficult in presence of electrode-surface adsorbates or explicit solvent molecules. In this work, we present a methodological advancement of the HBM, both facilitating and extending its applicability. The advanced version neither requires energy corrections nor the specification of the "active" fraction of excess electrons, providing a versatile and readily available method for the simulation of charged interfaces also when adsorbates or explicit solvent molecules are present. Our computational DFT results for Pt(111), Au(111) and Li(100) metal electrodes in high-dielectric-constant solvents demonstrate an excellent agreement in the interfacial charging characteristics obtained from simulations with the advanced HBM in comparison with the (linearized) Poisson-Boltzmann model (PBM).

Materials Science,Computational Physics
Understanding Electrochemical Interfaces through Comparing Experimental and Computational Charge Density-Potential Curves

Nandita Mohandas,Sumit Bawari,Jani J.T. Shibuya,Soumya Ghosh,Jagannath Mondal,Tharangattu N. Narayanan,Angel Cuesta

DOI: https://doi.org/10.1039/d4sc00746h

IF: 8.4

2024-04-25

Chemical Science

Abstract:Electrode-electrolyte interfaces play a decisive role in electrochemical charge accumulation and transfer processes. Theoretical modelling of these interfaces is critical to decipher the microscopic details of such phenomena. Different force field-based molecular dynamics protocols are compared here in a view to connect calculated and experimental charge density-potential relationships. Platinum-aqueous electrolyte interfaces are taken as a model. The potential of using experimental charge density-potential curves to transform cell voltage into electrode potential in force-field molecular dynamics simulations, and the need for that purpose of developing simulation protocols that can accurately calculate the double-layer capacitance, are discussed.

chemistry, multidisciplinary
Bridging the gap between mesoscopic and molecular models of solid/liquid interfaces out-of-equilibrium

Aaron R. Finney,Matteo Salvalaglio

DOI: https://doi.org/10.1016/j.cherd.2022.02.018

IF: 4.119

2022-04-01

Chemical Engineering Research and Design

Abstract:Solid/liquid interfaces control various processes of technological relevance in the process industry and many fundamental physicochemical phenomena. This work examines the link between the atomistic description of mass transfer at solid/liquid interfaces out of equilibrium and constitutive mass transfer equations which are typically used to model these processes at the mesoscale. In our analyses we discuss the microscopic inconsistencies apparent in simplified models of mass transfer whenever non-idealities dominate the liquid phase in the proximity of solid/liquid interfaces. Using C μ MD – a molecular simulation technique to investigate out-of-equilibrium, concentration-driven processes with pseudo open-boundary conditions – we outline a strategy to capture and quantify non-idealities induced by specific interactions between the solid surface and molecules in the fluid phase. We demonstrate our approach by studying electrolyte solutions in technologically important, multi-component systems where the introduction of a solid/liquid interface induces substantial deviations in the composition and electrochemical properties locally compared to the bulk fluid phase. To this aim, we analyse NaCl(aq) solutions in contact with (i) the graphite basal surface and (ii) {100} NaCl(s) crystalline surfaces. We uncover the tendency of the sodium cation to preferentially adsorb at the surfaces considered, which induces local violations of electroneutrality that leads to the emergence of an electric potential in the fluid phase at the solid/liquid interface.
Electrified/charged Aqueous Interfaces: General Discussion

Xavier R. Advincula,Ellen H. G. Backus,Mischa Bonn,Stephen J. Cox,Ulrike Diebold,Alexander Fellows,Aaron R. Finney,Gaurav Goel,Jonathan Hedley,Ying Jiang,Di Jin,Venkat Kapil,Nikita Kavokine,Jacob Klein,Damien Laage,Nandita Mohandas,Karina Morgenstern,Taritra Mukherjee,Monica Olvera de la Cruz,Hanna Orlikowska-Rzeznik,Susan Perkin,Pablo M. Piaggi,Carlos Gomez Rodellar,Paul Ryan,Thomas Sayer,Malina Seyffertitz,Margarita Shepelenko,Gabriele C. Sosso,Martin Thaemer,Aswathi Vilangottunjalil,Rowan Walker-Gibbons,Yongkang Wang,Adam P. Willard,Peng Zhang

DOI: https://doi.org/10.1039/d3fd90065g

2024-01-01

Faraday Discussions

Abstract:Malina Seyffertitz opened a general discussion of the paper by Adam P. Willard: Your simulations are based on a flat electrode geometry. How difficult would it be to introduce curved surfaces, i.e. porous electrodes? Adam P. Willard responded: It is certainly not impossible to si

[Guanethidine (Ismelin) in bathmotropic disorders of heart rhythm].

MetalWalls: A Classical Molecular Dynamics Software Dedicated to the Simulation of Electrochemical Systems

Accelerating QM/MM simulations of electrochemical interfaces through machine learning of electronic charge densities

Molecular Simulation of Electrode-Solution Interfaces

Molecular dynamics simulations of electrified interfaces including the metal polarisation

PiNNwall: Heterogeneous Electrode Models from Integrating Machine Learning and Atomistic Simulation

Molecular dynamics simulations of metal-electrolyte interfaces under potential control

Water at an electrochemical interface - a simulation study

(Invited) Study of Electrochemical Interfaces Using DFT and the Classical Liquid Theory Hybrid Simulations

Polarizable Potentials For Metals: The Density Readjusting Embedded Atom Method (DR-EAM)

Electronic Structure Modeling of Electrochemical Reactions at Electrode/Electrolyte Interfaces in Lithium Ion Batteries

Simulations of Coulomb systems with slab geometry using an efficient 3d Ewald summation method

Molecular dynamics simulations of electrochemical interfaces

Integrating Experiment with Theory to Determine the Structure of Electrode-Electrolyte Interfaces

Computer simulations of ionic liquids at electrochemical interfaces

A Simple and Efficient Lattice Summation Method for Metallic Electrodes in Constant Potential Molecular Dynamics Simulation

Advancement of the Homogeneous Background Method for the Computational Simulation of Electrochemical Interfaces

Understanding Electrochemical Interfaces through Comparing Experimental and Computational Charge Density-Potential Curves

Bridging the gap between mesoscopic and molecular models of solid/liquid interfaces out-of-equilibrium

Electrified/charged Aqueous Interfaces: General Discussion