Experimental and theoretical study of a novel freeze desalination system with an intermediate cooling liquid

Reza Kaviani,Hamidreza Shabgard,Aly Elhefny,Jie Cai,Ramkumar Parthasarathy
DOI: https://doi.org/10.1016/j.desal.2024.117381
IF: 11.211
2024-01-28
Desalination
Abstract:Freeze desalination (FD) is a potentially suitable method for treatment of high salinity brines. In this study, a novel FD system utilizing an intermediate cooling liquid (ICL) is fabricated and employed to desalinate brines with salinities up to 100,000 ppm. The FD system consists of a refrigeration unit and a desalination unit that are in thermal communication via the ICL. The desalination unit includes a freezing chamber, several filters, and a centrifugal separator. Feed brine is injected into the cold ICL inside the freezing chamber and partially freezes. The ice is subsequently separated from the ICL and unfrozen concentrated brine. The collected ice contains small amounts of concentrated brine, most of which is drained centrifugally before melting the ice. The developed FD system operates at atmospheric pressure and benefits from the superior heat transfer rates offered by direct contact between the brine and the cooling fluid. Furthermore, it resolves the issues of ice attachment to the cooling surfaces and mixing of refrigerant with the treated water. The effects of the feed brine salinity, cooling temperature, and centrifugation time on the recovery ratio and purity of the treated water were investigated experimentally. Results showed that the recovery ratio increases by decreasing the cooling temperature, and by decreasing the feed brine salinity. However, higher recovery ratios were found to increase the residual salinity in the treated water. For a feed brine with total dissolved solids (TDS) of 70,000 ppm and cooling temperature of −17 °C, recovery ratio of about 50 % and treated water TDS of ⁓2600 ppm were achieved experimentally. A theoretical model of the system was also developed and validated against the experimental results.
engineering, chemical,water resources
What problem does this paper attempt to address?