RAB GTPases expressed in human melanoma cells.

D. Chen,J. Guo,W. Gahl

DOI: https://doi.org/10.1016/S0167-4889(96)00169-3

1997-01-10

Biochimica et Biophysica Acta

Abstract:

What problem does this paper attempt to address?

Eco‐Friendly Mechanochemical Synthesis of Bifunctional Metal Oxide Electrocatalysts for Zn‐Air Batteries

M. García-Rodríguez,Diego Cazorla-Amorós,E. Morallon

DOI: https://doi.org/10.1002/cssc.202401055

IF: 8.4

2024-06-27

ChemSusChem

Abstract:The development of green and environmentally friendly synthesis methods of electrocatalysts is a crucial aspect in decarbonizing energy generation. In this study, eco‐friendly mechanochemical synthesis of perovskite metal oxide‐carbon black composites is proposed using different conditions and additives such as KOH. Furthermore, the optimization of ball milling conditions, including time and rotational speed, is studied. The mechanochemical synthesis in solid‐state conditions without additives produces electrocatalysts that exhibit the highest bifunctional electrochemical activity towards both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Moreover, this synthesis demonstrates a lower Environmental Impact Factor (E‐factor), indicating its greener nature, and due to its simplicity, it has a great potential for scalability. The obtained bifunctional electrocatalysts have been tested in a rechargeable zinc‐air battery (ZAB) for 22 h with similar performance compared to the commercial catalyst (Pt/C) at significantly lower cost. These promising findings are attributed to the enhanced interaction between the perovskite metal oxide and carbon material and the improved dispersion of the perovskite metal oxide on the carbon materials.

chemistry, multidisciplinary,green & sustainable science & technology
Enhancing Interaction between Lanthanum Manganese Cobalt Oxide and Carbon Black through Different Approaches for Primary Zn–Air Batteries

Mario García-Rodríguez,Jhony X. Flores-Lasluisa,Diego Cazorla-Amorós,Emilia Morallón

DOI: https://doi.org/10.3390/ma17102309

IF: 3.4

2024-05-14

Materials

Abstract:Due to the need for decarbonization in energy generation, it is necessary to develop electrocatalysts for the oxygen reduction reaction (ORR), a key process in energy generation systems such as fuel cells and metal–air batteries. Perovskite–carbon material composites have emerged as active and stable electrocatalysts for the ORR, and the interaction between both components is a crucial aspect for electrocatalytic activity. This work explores different mixing methods for composite preparation, including mortar mixing, ball milling, and hydrothermal and thermal treatments. Hydrothermal treatment combined with ball milling resulted in the most favorable electrocatalytic performance, promoting intimate and extensive contact between the perovskite and carbon material and improving electrocatalytic activity. Employing X-ray photoelectron spectroscopy (XPS), an increase in the number of M-O-C species was observed, indicating enhanced interaction between the perovskite and the carbon material due to the adopted mixing methods. This finding was further corroborated by temperature-programmed reduction (TPR) and temperature-programmed desorption (TPD) techniques. Interestingly, the ball milling method results in similar performance to the hydrothermal method in the zinc–air battery and, thus, is preferable because of the ease and straightforward scalability of the preparation process.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Bifunctional Mulberry-Like Composites with Metal-Nitrogen Sites for Boosted Oxygen Electrocatalysis in Zinc-Air Batteries

Han Man,Guanyu Chen,Ruixuan Zhang,Yihao Liu,Fang,Xuefeng Zhang,Renchao Che

DOI: https://doi.org/10.2139/ssrn.4310479

2022-01-01

Abstract:Oxygen reduction reactions (ORR) and oxygen evolution reaction (OER) function as the key technologies for zinc-air batteries (ZABs) and other energy conversion devices, whereas the proliferation still hinges on bifunctional catalysts to address their slow kinetics. Herein, we purpose a mulberry-like architecture of cobalt-nitrogen doped carbon spheres encapsulating Co particles (Co-MP@NCS) through a template-engaged pyrolysis as ORR/OER bifunctional electrocatalysts for ZABs. Co-MP@NCS with abundant active sites possesses advantages such as hierarchical pores and strong coupling effect between the components, optimizing the reaction pathway and accelerating the reaction kinetics. Meanwhile, the experimental and theoretical studies demonstrate the critical role of coordinated Co and nanoparticles in modulating the electronic and magnetic configurations, establishing novel structure-activity correlations. The bifunctional electrocatalyst manifest an ORR half-wave potential of 0.85 V and an OER overpotential of 233 mV at 10 mA cm-2. The assembled aqueous ZAB display an attractive power density of 181 mW cm-2.
Metal-organic-framework-derived Fe, Co, N-tri-dopped porous carbon as oxygen electrocatalysts for Zn-air batteries

Ruili Song,Liqun Guan,Lidan Fan,Xianhua Miao,Hui Zhang,Jianqun Cheng,Ti Zhou,Cong Ni,Jikai Fan

DOI: https://doi.org/10.1016/j.est.2023.110345

IF: 9.4

2024-01-05

Journal of Energy Storage

Abstract:To commercialize the rechargeable zinc-air (Zn-air) battery, it is desirable but challenging to design highly active, low-cost, stable, and earth-rich bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) to replace rare, expensive, and unstable noble-metal electrocatalysts. Herein, two MOFs are combined under electrostatic interaction and pressure by the way of Ball milling. Then, after post-processing including calcination, acid pickling, and N doping, the bimetal (Fe and Co) and N triple-doped porous carbon electrocatalyst (MIL/ZIF-4-700 °C-NH 3 ) is prepared. Noteworthily, the MIL/ZIF-4-700 °C-NH 3 has bimetallic active sites, high contents of pyridine N and graphite N, large surface area, mesoporous structure, and conductive carbon skeletons, which decide the excellent ORR performance. For ORR, the half-wave potential ( E 1/2 = 0.902 V vs. RHE) of MIL/ZIF-4-700 °C-NH 3 is 27 mV higher than that of 20 wt% Pt/C ( E 1/2 = 0.875 vs. RHE). And the catalyst has also excellent methanol tolerance and stability. The Zn-air battery with MIL/ZIF-4-700 °C-NH 3 as cathode catalyst has higher peak power density (176.5 mW cm −2 ) than that with 20 wt% Pt/C (141.8 mW cm −2 ) and 20 wt% Pt/C + RuO 2 (94.4 mW cm −2 ) as cathode catalyst. Meanwhile, the Zn-air battery with MIL/ZIF-4-700 °C-NH 3 as cathode catalyst exhibits perfect charge-discharge stability (longer than 540 h).

energy & fuels
Perovskite oxide composites for bifunctional oxygen electrocatalytic activity and zinc-air battery application- a mini-review

Pandiyarajan Anand,Ming-Show Wong,Yen-Pei Fu

DOI: https://doi.org/10.1016/j.ensm.2023.03.033

IF: 20.4

2023-04-07

Energy Storage Materials

Abstract:Zinc-air batteries (ZABs) are considered as a potential alternative to next-generation batteries. However, the slow reaction kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), involved in the charging and discharging of ZAB hinder their real-world applicability. Thus, developing an excellent bifunctional OER/ORR electrocatalyst that exhibits solid cyclic stability is crucial. Perovskite oxides are known for their composition and structural flexibility, which allows for the modulation of the electronic structure of electrocatalysts by incorporating foreign metals into oxides, resulting in improved oxygen electrocatalytic activity. Achieving bifunctional oxygen electrocatalytic activity through a single pristine perovskite oxide is challenging due to the requirement of different reaction steps. Building heterostructures by combing perovskite oxides with metal, metal alloys, metal hydroxides, metal oxides, spinel oxides, and N-doped carbon materials enhances the active sites of the catalyst for bifunctional activity and ZAB application. In this review, we discuss the mechanism involved in ZAB and bifunctional oxygen electrocatalytic activity, mainly focusing on perovskite oxide heterostructure synthesizing strategies and their performance in ZAB. This review aims to pave the way for designing inexpensive perovskite oxide-based electrocatalysts and tailoring the active sites for improved energy conversion and industrialization.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Controllable Solid-Phase Fabrication of an Fe2O3/Fe5C2/Fe-N-C Electrocatalyst Toward Optimizing the Oxygen Reduction Reaction in Zinc-Air Batteries

Xingmei Guo,Shanjing Liu,Xiaohan Wan,Junhao Zhang,Yuanjun Liu,Xiangjun Zheng,Qinghong Kong,Zhong Jin

DOI: https://doi.org/10.1021/acs.nanolett.2c01318

IF: 10.8

2022-01-01

Nano Letters

Abstract:Preparing advanced electrocatalysts via solid-phase reactions encounters the challenge of low controllability for multiconstituent hybridization and microstructure modulation. Herein, a hydrothermal-mimicking solid-phase system is established to fabricate novel Fe2O3/Fe5C2/Fe-N-C composites consisting of Fe2O3/Fe5C2 nanoparticles and Fe,N-doped carbon species with varying morphologies. The evolution mechanism featuring a competitive growth of different carbon sources in a closed hypoxic space is elucidated for a series of Fe2O3/Fe5C2/Fe-N-C composites. The size and dispersity of Fe2O3/Fe5C2 nanoparticles, the graphitization degree of the carbonaceous matrix, and their diverse hybridization states lead to disparate electrocatalytic behaviors for the oxygen reduction reaction (ORR). Among them, microspherical Fe2O3/Fe5C2/Fe-N-C-3 exhibits an optimal ORR performance and the as-assembled zinc-air battery shows all-round superiority to the Pt/C counterpart. This work presents a mild solid-phase fabrication technique for obtaining a variety of nanocomposites with effective control over composition hybridization and microstructural modulation, which is significantly important for the design and optimization of advanced electrocatalysts.
The optimization of iron porphyrin@MOF-5 derived Fe-N-C electrocatalysts for oxygen reduction reaction in zinc-air batteries

Xiao-Shuang Guo,Zhen-Yu Huang,Xiao-Wen Qi,Li-Ping Si,Hao Zhang,Hai-Yang Liu

DOI: https://doi.org/10.1016/j.jelechem.2023.117381

IF: 4.598

2023-03-24

Journal of Electroanalytical Chemistry

Abstract:The development of non-precious metal catalysts (NPMC) for oxygen reduction reactions (ORR) is a hot topic for fuel cells and zinc-air batteries (ZABs). This study reports a method to obtain efficient Fe-N-C ORR catalysts via doping dicyandiamide and iron porphyrins on the pyrolyzed MOF-5 and followed pyrolysis to achieve the anchoring of Fe-N x active sites onto square-shaped structure carbon material. The prepared Fe-N-C catalysts exhibit excellent ORR performance under an alkaline environment with half-wave potentials up to 0.903 V, which is 57 mV higher than that of Pt/C under the same conditions. It has excellent stability and methanol resistance. Moreover, this catalyst exhibited high specific capacity (821.8 mAh g -1 ) and power density (111.7 mW cm -2 ) in assembled ZAB, and excellent charging and discharging stability.

chemistry, analytical,electrochemistry
Enhancement on PrBa0.5Sr0.5Co1.5Fe0.5O5 Electrocatalyst Performance in the Application of Zn-Air Battery

Chengcheng Wang,Ziheng Zheng,Zian Chen,Xinlei Luo,Bingxue Hou,Mortaza Gholizadeh,Xiang Gao,Xincan Fan,Zanxiong Tan

DOI: https://doi.org/10.3390/catal12070800

IF: 3.9

2022-07-21

Catalysts

Abstract:Due to the insufficient stability and expensive price of commercial precious metal catalysts like Pt/C and IrO2, it is critical to study efficiently, stable oxygen reduction reaction as well as oxygen evolution reaction (ORR/OER) electrocatalysts of rechargeable Zn-air batteries. PrBa0.5Sr0.5Co1.5Fe0.5O5 (PBSCF) double perovskite was adopted due to its flexible electronic structure as well as higher electro catalytic activity. In this study, PBSCF was prepared by the citrate-EDTA method and the optimized amount of PBSCF-Pt/C composite was used as a potential ORR/OER bifunctional electrocatalyst in 0.1 M KOH. The optimized composite exhibited excellent OER intrinsic activity with an onset potential of 1.6 V and Tafel slope of 76 mV/dec under O2-saturated 0.1 M KOH. It also exhibited relatively competitive ORR activity with an onset potential of 0.9 V and half-wave potential of 0.78 V. Additionally, Zn–air battery with PBSCF composite catalyst showed relatively good stability. All these results illustrate that PBSCF-Pt/C composite is a promising bifunctional electrocatalyst for rechargeable Zn-air batteries.

chemistry, physical
Compositional engineering of perovskite oxide BaCo0.5Fe0.5O3-δ as an efficient bifunctional electrocatalyst for rechargeable zinc-air battery

Anqi Xu,Jian Zhou,Tong Liu,Jing Wang,Yao Wang,Dong Zhang,Xuan De Huang,Yilin Liu,Xuelei Hu

DOI: https://doi.org/10.1039/d3cy01464a

IF: 6.177

2023-12-22

Catalysis Science & Technology

Abstract:Herein, a single-phase perovskite oxide BaCo0.5Fe0.5O3-δ (R-BCF) electrocatalyst has been successfully prepared for efficient and robust rechargeable zinc-air battery (ZAB) application by adapting the rapid cooling treatment at 300 °C/min. Compared with the dual-phase electrocatalyst synthesized at the slow cooling rate of 3 °C/min, the R-BCF electrocatalyst shows effectively improved oxygen reduction reaction and oxygen evolution reaction bifunctional electrocatalytic activity as well as greatly enhanced peak output power density of 132 mW cm-2 with an enhancement rate of 63%. Moreover, the R-BCF electrocatalyst-based ZAB demonstrates excellent electrocatalytic stability, and no obvious performance degradation is observed during the 210-hour operation with a total of 1260 charge-discharge cycles. These results indicate that the single-phase perovskite oxide R-BCF electrocatalyst is a potential bifunctional cathode alternative for efficient and stable ZAB application, and tuning the cooling rate can greatly manipulate material composition for various energy storage and conversion devices.

chemistry, physical
Porous carbon-nanostructured electrocatalysts for zinc-air batteries: From materials design to applications

Sanshuang Gao,Maolin Li,Nianpeng Li,Lei Zhang,Qian Liu,Xinzhong Wang,Guangzhi Hu

DOI: https://doi.org/10.1039/d4na00847b

IF: 5.598

2024-11-09

Nanoscale Advances

Abstract:Zinc-air batteries (ZABs) are pivotal in the evolution of sustainable energy storage solutions, distinguished by their high energy density and minimal environmental footprint. The oxygen electrode, reliant on sophisticated porous carbon materials, is critical to their operational efficiency. This review scrutinizes the enhancement of the Oxygen Reduction Reaction (ORR) and Oxygen Evolution Reaction (OER) in ZABs through advanced porous carbon applications. It delves into innovative synthesis techniques such as templating, chemical vapor deposition, and self-assembly that tailor pore structures for peak performance. The interactions between catalytic sites and carbon nanostructures, which significantly boost electrochemical performance, are highlighted. The manuscript discusses future strategies for overcoming current challenges by advancing catalytic efficiency and electrode design, emphasizing the integration of nano-engineering and material science to foster ZABs with superior energy capacity and adaptability. Additionally, the review projects how ongoing research into carbon material properties could unlock new applications in other energy systems, potentially broadening the scope of ZAB technology. This paper integrates recent advancements in porous carbon materials, offering pivotal insights for the continuous development of next-generation high-performance ZABs.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
In-situ photodeposition of CoSx on Pa0.5Ba0.5Mn0.25Fe0.75O3-δ perovskite to boost bifunctional oxygen electrocatalysis for rechargeable Zn-air batteries

Xiaojun Shi,Yanzhu Deng,Ling Zhao,Yansheng Gong,Rui Wang,Huanwen Wang,Beibei He

DOI: https://doi.org/10.1016/j.electacta.2021.138951

IF: 6.6

2021-09-01

Electrochimica Acta

Abstract:The single catalytic property with limited active sites severely restricts the development of perovskite materials as efficient oxygen electrocatalysts in rechargeable Zn-air batteries (ZABs). Although some researches on structural optimization and surface decoration of perovskite materials have improved their electrocatalytic performance, the complicated preparation process, and harsh treatment conditions urge the apparent of a creative attempt towards perovskite. Herein, we develop a highly-dispersed amorphous CoSx modified Pa0.5Ba0.5Mn0.25Fe0.75O3-δ composites (CoSx/PBMF) by a rapid and mild photochemistry-deposition method. The structural merit and the synergistic effect of integrating amorphous CoSx and PBMF result in a perovskite material with outstanding electrocatalytic activity and superior durability. Moreover, the liquid rechargeable ZAB assembled with integrated CoSx/PBMF electrocatalyst as air electrode demonstrates a maximal power density of 114 mW cm−2 and a long charge-discharge cycling life over 220 h with initial cycle efficiency of 60.5% and 0.03 V incensement of voltage gap. Meanwhile, the all-solid-state CoSx/PBMF-based ZABs maintain an open-circuit voltage of 3.92 V in series of three ZABs and powered LED panels stably, demonstrating its practical utility as the battery for portable electron devices.

electrochemistry
Trimetallic ZIFs-derived porous carbon as bifunctional electrocatalyst for rechargeable Zn-air battery

Zanwu Guo,Yanan Ma,Yueju Zhao,Yi Song,Shaoru Tang,Qian Wang,Wei Li

DOI: https://doi.org/10.1016/j.jpowsour.2022.231723

IF: 9.2

2022-06-17

Journal of Power Sources

Abstract:Design of the non-precious-metal bifunctional electrocatalyst with high performance and remarkable stability is the most critical issue for the rechargeable ZAB. Herein, a simple and convenient method for synthesizing trimetallic Fe/Co/Zn-ZIF-derived porous carbon as the bifunctional electrocatalyst towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has been developed. The optimal trimetallic ZIF-derived carbon material shows a marked ORR catalytic activity with a more positive onset potential ( E o ) of 1.010 V and half-wave potential ( E 1/2 ) of 0.853 V, which is superior to the commercial Pt/C catalyst. Moreover, it also exhibits the excellent OER performance with lower overpotential of 352 mV at 10 mA cm −2 in 1 M KOH than that of RuO 2 and the observed Tafel slope of 82 mV dec −1 . A rechargeable ZAB assembled with the as-prepared ZIF-derived porous carbon as an air cathode displays the superior performance with a maximum current density of 240.7 mA cm −2 and a peak power density of 156.7 mW cm −2 as well as a specific capacity of 769.13 mAh g −1 , much larger than those of ZAB equipped with Pt/C–RuO 2 .

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
In Situ, Fast Constructing Interface/doping-Engineered NiCo Bimetal-Based Composites Boosting Electrocatalytic Oxygen Reduction for Zinc-Air Battery

Yanan Wang,Jianhua Qian,Jian Zheng,Junhua Li,Anbang Sun,Jinjuan Xing,Lin Liu,Yong Zheng

DOI: https://doi.org/10.1016/j.jallcom.2024.175821

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:Investigating cost-effective, high-performance, stable and durable oxygen reduction reaction (ORR) catalysts is imperative, yet it's still a formidable obstacle in the advancement of metal-air batteries. In this research, NiCobimetallic oxides in situ combined with NiCo-bimetal alloy upon the surface of carbon-based matrix (reduced graphene oxide) (NiCo/Co-NiO/rGO) were synthesized by microwave hydrothermal treatment coupled with an ultrafast Joule heating shock process. The interfacial charge transfer between the bimetal alloy and metal oxide in NiCo/Co-NiO/rGO resulted in electron redistribution at the heterointerface, where *O species migrated to the NiCo alloy surface through Mn+-O-M-0 (M=Ni, =Ni, Co and n=2, =2, 3) bonds, facilitating continuous electron transport between the two phases and unveiling added active sites. Introducing abundant oxygen vacancies by Ni3+ and Co3+ facilitated charge transfer between different valence states and led to forming more active sites, thus significantly enhancing ORR performance. More importantly, solid solution strengthening within the NiCobimetallic alloy mitigated the oxidation and corrosion of the catalyst. Therefore, the as-synthesized NiCo/Co-NiO/rGO(5% Co) exhibited excellent ORR performance under an alkaline medium. It achieved a half-wave potential (E-1/2) of 0.85 V(vs. vs . RHE) and maintained 89.10 % of its current density after a 12-h long-term reaction. The assembled zinc-air battery (ZAB) employing this catalyst proved remarkable specific capacity (807.04 mAh.g(Zn)(-1)), power density (95.54 mW cm(-2)) and cycling stability (over 240 h), outperforming that of commercial Pt/C+RuO2-based ZAB device. This study presents a viable approach for fabricating low-cost dual transition metal-based catalysts, thereby boosting their electrocatalytic performance and enhancing the efficiency and longevity of metal-air batteries.
Promoting Electrocatalytic Oxygen Reactions Using Advanced Heterostructures for Rechargeable Zinc-Air Battery Applications

Dingrong Qiu,Huihui Wang,Tingting Ma,Jiangdu Huang,Zhen Meng,Dayong Fan,Chris R Bowen,Huidan Lu,Yongping Liu,Sundaram Chandrasekaran

DOI: https://doi.org/10.1021/acsnano.4c02289

IF: 17.1

2024-08-20

ACS Nano

Abstract:In order to facilitate electrochemical oxygen reactions in electrically rechargeable zinc-air batteries (ZABs), there is a need to develop innovative approaches for efficient oxygen electrocatalysts. Due to their reliability, high energy density, material abundance, and ecofriendliness, rechargeable ZABs hold promise as next-generation energy storage and conversion devices. However, the large-scale application of ZABs is currently hindered by the slow kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). However, the development of heterostructure-based electrocatalysts has the potential to surpass the limitations imposed by the intrinsic properties of a single material. This Account begins with an explanation of the configurations of ZABs and the fundamentals of the oxygen electrochemistry of the air electrode. Then, we summarize recent progress with respect to the variety of heterostructures that exploit bifunctional electrocatalytic reactions and overview their impact on ZAB performance. The range of heterointerfacial engineering strategies for improving the ORR/OER and ZAB performance includes tailoring the surface chemistry, dimensionality of catalysts, interfacial charge transfer, mass and charge transport, and morphology. We highlight the multicomponent design approaches that take these features into account to create advanced highly active bifunctional catalysts. Finally, we discuss the challenges and future perspectives on this important topic that aim to enhance the bifunctional activity and performance of zinc-air batteries.
MOF-on-MOF-derived FeCo@NC OER&ORR bifunctional electrocatalysts for zinc-air batteries

Qianqiao Wang,Lan Wang,Shuya Zhang,Zhuo Chen,Wenchao Peng,Yang Li,Xiaobin Fan

DOI: https://doi.org/10.1016/j.jcis.2024.07.165

Abstract:Zinc-air batteries, as one of the emerging areas of interest in the quest for sustainable energy solutions, are hampered by the intrinsically sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), and still suffer from the issues of low energy density. Herein, we report a MOF-on-MOF-derived electrocatalyst, FeCo@NC-II, designed to efficiently catalyze both ORR (Ehalf = 0.907 V) and OER (Ej=10 = 1.551 V) within alkaline environments, surpassing esteemed noble metal benchmarks (Pt/C and RuO2). Systematically characterizations and density functional theory (DFT) calculations reveal that the synergistic effect of iron and cobalt bimetallic and the optimized distribution of nitrogen configuration improved the charge distribution of the catalysts, which in turn optimized the adsorption / desorption of oxygenated intermediates accelerating the reaction kinetics. While the unique leaf-like core-shell morphology and excellent pore structure of the FeCo@NC-II catalyst caused the improvement of mass transfer efficiency, electrical conductivity and stability. The core and shell of the precursor constructed through the MOF-on-MOF strategy achieved the effect of 1 + 1 > 2 in mutual cooperation. Further application to zinc-air batteries (ZABs) yielded remarkable power density (212.4 mW/cm2), long cycle (more than 150 h) stability and superior energy density (∼1060 Wh/kg Zn). This work provides a methodology and an idea for the design, synthesis and optimization of advanced bifunctional electrocatalysts.
Recent progress in cobalt-based carbon materials as oxygen electrocatalysts for zinc-air battery applications

Shuyun Wang,Shengmei Chen,Longtao Ma,Juan Antonio Zapien

DOI: https://doi.org/10.1016/j.mtener.2021.100659

IF: 9.257

2021-06-01

Materials Today Energy

Abstract:<p>Zinc-air batteries (ZABs) have the advantages of low price, environmental friendliness, and high energy density that enables great potential for the application of energy storage devices. Unfortunately, the main limitation of zinc-air batteries is the low kinetics of air cathode, including oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), making it necessary to develop catalysts with excellent performance to speed up the reaction rates and improve their efficiency. For these purposes, cobalt-based carbon has the advantages of low cost, high activity, and stability, which are suitable for oxygen electrocatalysts. In this review, the basic mechanisms of ORR and OER electrocatalysis are introduced and analyzed, and the development of cobalt-based carbon materials used as electrocatalysts in zinc-air batteries in recent years is reviewed, including cobalt oxide-based carbon, cobalt-nitrogen-doped carbon (Co-N-C), and cobalt bimetallic-based carbon. Additionally, we review the use of <em>in situ/in operando</em> characterization techniques applied to trace the catalytic reactions. Finally, we provide an account of the current challenges and future perspectives for the design of new types of high efficiency and bifunctional electrocatalysts.</p>

materials science, multidisciplinary,chemistry, physical,energy & fuels
Iron-based nanocomposites implanting in N, P Co-doped carbon nanosheets as efficient oxygen reduction electrocatalysts for Zn-Air batteries

Xiannong Tang,Yonggan Wu,Weijuan Zhai,Tinglin Chu,Longbin Li,Bingyu Huang,Ting Hu,Kai Yuan,Yiwang Chen

DOI: https://doi.org/10.1016/j.coco.2021.100994

IF: 8

2022-01-01

Composites Communications

Abstract:Reasonable design and construction of efficient and cost-effective oxygen reduction reaction (ORR) electrocatalysts are vital for promoting the practical application of zinc-air batteries (ZABs). Herein, we reported a one-pot self-assemble approach in combination with pyrolysis to prepare nanocomposite electrocatalyst comprised of atomically dispersed Fe-Nx sites and uniformly implanted FeP nanoparticles, which supported on N, P co-doped porous carbon nanosheets (denoted as 2D-FeP@FeNC-900). The 2D-FeP@FeNC-900 exhibits large specific surface area and hierarchical porous structure, along with unique incorporation of FeP, Fe-Nx and N, P co-doping provides abundant active sites and favorable synergistic effect, imparting 2D-FeP@FeNC-900 superior kinetic and electrocatalytic activity towards ORR. Meanwhile, the 2D-FeP@FeNC-900 displays an advantage of methanol-resistance over benchmark Pt/C catalyst. Moreover, the ZABs with 2D-FeP@FeNC-900 achieve superior discharge power density of 260 mW cm−2, specific capacitance of 803.7 mA h g−1, and excellent cyclic stability (when combined with RuO2) of over 130 h, surpassing those of Pt/C counterpart. This work provides an effective and generalizable strategy for engineering metal-compound and atomic-sites on dual-doped nanocarbon matrix for sustainable energy conversation and storage devices.

materials science, composites
Clarifying the Controversial Catalytic Performance of Co(OH)2 and Co3O4 for Oxygen Reduction/Evolution Reactions toward Efficient Zn-Air Batteries

Zhishuang Song,Xiaopeng Han,Yida Deng,Naiqin Zhao,Wenbin Hu,Cheng Zhong

DOI: https://doi.org/10.1021/acsami.7b05395

2017-07-12

Abstract:Cobalt-based nanomaterials have been widely studied as catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) due to their remarkable bifunctional catalytic activity, low cost, and easy availability. However, controversial results concerning OER/ORR performance exist between different types of cobalt-based catalysts, especially for Co(OH)2 and Co3O4. To address this issue, we develop a facile electrochemical deposition method to grow Co(OH)2 directly on the skeleton of carbon cloth, and further Co3O4 was obtained by post thermal treatment. The entire synthesis strategy removes the use of any binders and also avoids the additional preparation process (e.g., transfer and slurry coating) of final electrodes. This leads to a true comparison of the ORR/OER catalytic performance between Co(OH)2 and Co3O4, eliminating uncertainties arising from the electrode preparation procedures. The surface morphologies, microstructures, and electrochemical behaviors of prepared Co(OH)2 and Co3O4 catalysts were systemically investigated by scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and electrochemical characterization methods. The results revealed that the electrochemically deposited Co(OH)2 was in the form of vertically aligned nanosheets with average thickness of about 4.5 nm. After the thermal treatment in an air atmosphere, Co(OH)2 nanosheets were converted into mesoporous Co3O4 nanosheets with remarkably increased electrochemical active surface area (ECSA). Although the ORR/OER activity normalized by the geometric surface area of mesoporous Co3O4 nanosheets is higher than that of Co(OH)2 nanosheets, the performance normalized by the ECSA of the former is lower than that of the latter. Considering the superior apparent overall activity and durability, the Co3O4 catalyst has been further evaluated by integrating it into a Zn-air battery prototype. The Co3O4 nanosheets in situ supported on carbon cloth cathode enable the assembled Zn-air cells with large peak power density of 106.6 mW cm-2, low charge and discharge overpotentials (0.67 V), high discharge rate capability (1.18 V at 20 mA cm-2), and long cycling stability (400 cycles), which are comparable or even superior to the mixture of state-of-the-art Pt/C and RuO2 cathode.
CuO/Co 3 O 4 heterostructures with carbon nanotubes composites as ORR/OER electrocatalysts for Zn-air batteries

Xiaoke Zhang,Qianfeng Liu,Zhao Yan,Shimin Liu,Erdong Wang

DOI: https://doi.org/10.1016/j.est.2023.107485

IF: 9.4

2023-04-28

Journal of Energy Storage

Abstract:Rechargeable Zn-air batteries (ZABs) constitute promising next-energy conversion and storage systems due to their low cost, intrinsic safety, and feasibility to fabricate high energy density and stable charge and discharge voltage. Nevertheless, the most significant challenge of rechargeable ZABs is relatively high over potential owing to the sluggish kinetics of oxygen reactions on the air cathode, requiring high-performance noble-metal-free bifunctional electrocatalysts with highly cost-effective. Herein, we developed a facile and scalable coprecipitation strategy to successfully prepare CuO/Co 3 O 4 @CNTs catalysts for bifunctional oxygen electrocatalysts. This unique strategy enables CuO/Co 3 O 4 nanoparticles to be uniformly grown on CNTs and the simultaneous pyrolysis process results in the generation of ultrafine CuO/Co 3 O 4 heterostructures . Contributed to an abundance of heterostructures, the oxygen vacancies and unsaturated chemical bonds in the interface were generated in CuO/Co 3 O 4 . Consequently, the CuO/Co 3 O 4 @CNTs delivered bifunctional activity of ΔE of 0.78 V and good stability that can maintain 1000 h charge and discharge cycles.

energy & fuels
CoO Enhanced Oxygen Evolution Kinetics of LaMnO3 Perovskite As a Potential Cathode for Rechargeable Zn-Air Batteries

Qilong Zheng,Yidan Zhang,Chunchang Wang,Chuanhui Zhang,Youmin Guo

DOI: https://doi.org/10.1021/acs.energyfuels.1c03869

IF: 4.6541

2021-01-01

Energy & Fuels

Abstract:For an ideal electrocatalyst for Zn-air batteries (ZABs) air electrode, it should possess efficient dual-functional catalytic activity for both oxygen reduction and oxygen evolution reactions in an alkaline electrolyte. Although LaMnO3 perovskite oxide presents excellent ORR catalytic activity, its OER activity is inadequate to serve as a dual-functional catalyst for ZABs. To enhance the OER activity of LaMnO3 perovskite, this work used a simple and easy-to-operate ultrasonic mixing technique to prepare the LaMnO3-CoO composite. The enhancement of OER and ORR catalytic activity of LaMnO3 perovskite by CoO was investigated. Meanwhile, the cycling stability and polarization behavior of the assembled ZABs using LaMnO3-CoO composite as an air electrode were further evaluated. The battery delivered a maximum power density of 101.48 mW cm(-2) and a high energy efficiency of up to 58.6% after 150 cycles. The LaMnO3-CoO composite exhibited better cycling stability than commercial Pt/C catalyst, which indicates that the LaMnO3-CoO composite is a promising dual-functional catalyst and can be applied in commercial Zn-air battery with an effective electrocatalytic activity.

RAB GTPases expressed in human melanoma cells.

Eco‐Friendly Mechanochemical Synthesis of Bifunctional Metal Oxide Electrocatalysts for Zn‐Air Batteries

Enhancing Interaction between Lanthanum Manganese Cobalt Oxide and Carbon Black through Different Approaches for Primary Zn–Air Batteries

Bifunctional Mulberry-Like Composites with Metal-Nitrogen Sites for Boosted Oxygen Electrocatalysis in Zinc-Air Batteries

Metal-organic-framework-derived Fe, Co, N-tri-dopped porous carbon as oxygen electrocatalysts for Zn-air batteries

Perovskite oxide composites for bifunctional oxygen electrocatalytic activity and zinc-air battery application- a mini-review

Controllable Solid-Phase Fabrication of an Fe2O3/Fe5C2/Fe-N-C Electrocatalyst Toward Optimizing the Oxygen Reduction Reaction in Zinc-Air Batteries

The optimization of iron porphyrin@MOF-5 derived Fe-N-C electrocatalysts for oxygen reduction reaction in zinc-air batteries

Enhancement on PrBa0.5Sr0.5Co1.5Fe0.5O5 Electrocatalyst Performance in the Application of Zn-Air Battery

Compositional engineering of perovskite oxide BaCo0.5Fe0.5O3-δ as an efficient bifunctional electrocatalyst for rechargeable zinc-air battery

Porous carbon-nanostructured electrocatalysts for zinc-air batteries: From materials design to applications

In-situ photodeposition of CoSx on Pa0.5Ba0.5Mn0.25Fe0.75O3-δ perovskite to boost bifunctional oxygen electrocatalysis for rechargeable Zn-air batteries

Trimetallic ZIFs-derived porous carbon as bifunctional electrocatalyst for rechargeable Zn-air battery

In Situ, Fast Constructing Interface/doping-Engineered NiCo Bimetal-Based Composites Boosting Electrocatalytic Oxygen Reduction for Zinc-Air Battery

Promoting Electrocatalytic Oxygen Reactions Using Advanced Heterostructures for Rechargeable Zinc-Air Battery Applications

MOF-on-MOF-derived FeCo@NC OER&ORR bifunctional electrocatalysts for zinc-air batteries

Recent progress in cobalt-based carbon materials as oxygen electrocatalysts for zinc-air battery applications

Iron-based nanocomposites implanting in N, P Co-doped carbon nanosheets as efficient oxygen reduction electrocatalysts for Zn-Air batteries

Clarifying the Controversial Catalytic Performance of Co(OH)2 and Co3O4 for Oxygen Reduction/Evolution Reactions toward Efficient Zn-Air Batteries

CuO/Co 3 O 4 heterostructures with carbon nanotubes composites as ORR/OER electrocatalysts for Zn-air batteries

CoO Enhanced Oxygen Evolution Kinetics of LaMnO3 Perovskite As a Potential Cathode for Rechargeable Zn-Air Batteries