Risperidone: a once-daily dosage schedule.

S. Gupta,W. Gilroy

DOI: https://doi.org/10.3109/10401239509149628

1995-12-01

Abstract:

What problem does this paper attempt to address?

Speckle Pattern Inversion in High Temperature DIC Measurement

T.Q. Thai,J. Ruesch,P.R. Gradl,T.T. Truscott,R.B. Berke

DOI: https://doi.org/10.1007/s40799-021-00481-1

2021-05-04

Experimental Techniques

Abstract:During hot fire rocket engine testing, non-contacting measurements are superior to bonded gauges because they are immune to burning, shaking loose, or damage due to the harsh testing conditions. Additionally, when compared to instruments which register at single points, Digital Image Correlation (DIC) has the added benefit in that it collects full-field displacement and strain maps over the duration of the test. However, for certain materials and paints under some circumstances of temperature and camera sensitivity, portions of the speckle pattern which were darker at room temperature may emit more light compared to the initially lighter portions of the pattern, resulting in a high temperature pattern which is inverted in comparison with that at room temperature. To address this inversion, a post-processing method is introduced wherein an inverted image containing only emitted light is subtracted from an image containing both emitted and reflected light, thereby generating an un-inverted image. The artificial high temperature image is subsequently correlated against the room temperature image to obtain full-field strains. The subtraction technique is then validated using optical bandpass filters to prevent significant amounts of emitted light from reaching the camera sensor. The two methods are mapped onto common coordinates and shown to produce comparable results. The subtraction method sufficiently mitigates speckle pattern inversion, but its key drawback is that it only works when there is negligible displacement between the subtracted images (i.e. quasi-static loading). It is therefore preferable to eliminate inversion from reaching the camera in the first place by using optical bandpass filters.

engineering, mechanical,mechanics,materials science, characterization & testing
Improvement on Measurement Accuracy of High-Temperature DIC by Grayscale-Average Technique

Yun Quan Su,Xue Feng Yao,Shen Wang,Yin Ji Ma

DOI: https://doi.org/10.1016/j.optlaseng.2015.06.003

IF: 5.666

2015-01-01

Optics and Lasers in Engineering

Abstract:In this paper, an effective grayscale-average technique is proposed to minimize the thermal disturbance in digital image correlation (DIC) measurement method under high-temperature atmosphere environment. First, both the grayscale-average technique and the simulated high-temperature speckle image are developed to investigate the influences of thermal disturbance on DIC method under high-temperature environment. Second, a high-temperature DIC experiment has been performed to verify the validity of the proposed grayscale-average technique. Finally, the displacement fields and average thermal strains of several temperature conditions are extracted from the simulated speckle images and the experimental images, also the effects of the image number and the temperature in the grayscale-average technique are analyzed. The results will provide a new method for improving the measurement accuracy in DIC full-field deformation measurement under high-temperature atmosphere environment.
Impact of Speckle Deformability on Digital Imaging Correlation

Jiaqiu Wang,Hao Wu,Zhengduo Zhu,Hujin Xie,Han Yu,Qiuxiang Huang,Yuqiao Xiang,Phani Kumari Paritala,Jessica Benitez Mendieta,Haveena Anbananthan,Jorge Alberto Amaya Catano,Runxin Fang,Luping Wang,Zhiyong Li

DOI: https://doi.org/10.1109/access.2024.3398786

IF: 3.9

2024-05-18

IEEE Access

Abstract:Digital Image Correlation (DIC) has been widely used as a non-contact deformation measurement technique. Nevertheless, its accuracy is greatly affected by the speckle pattern on the specimen. To systematically evaluate how speckle deformability affects the precision of DIC algorithms. In this study, a test dataset of 2D speckle patterns with various prescribed deformation fields was numerically generated, containing two categories of speckles, i.e., the deformable and the non-deformable (rigid) ones. This dataset was used to evaluate the performance of inverse compositional Gauss-Newton (ICGN)-based DIC algorithms with two types of shape function (first-order and second-order), in the different scenarios of the deformation field. The results showed that imaging noise had a significant influence on the DIC algorithm. The first-order shape function (ICGN-1) performed better when tracking the simple linear deformation field. While the second-order shape function (ICGN-2) was proved to perform better on non-linear deformations. Moreover, the deformability of the speckle was found to have an obvious impact on the performance of the DIC algorithm. ICGN-2 could effectively reduce so-called speckle rigidity induced (SRI) error. Conclusively, ICGN-2 should be chosen as priority, because of its feasibility on non-linear deformation fields and speckle rigidity. While in the linear deformation scenarios, ICGN-1 was still a robust and efficient method.

computer science, information systems,telecommunications,engineering, electrical & electronic
Thermal radiation elimination method for high-temperature digital image correlation using polarization camera

Huanqing Wang,Qian Zhang,Pengxiang Ge,Yilei Zhu,Yonghong Wang

DOI: https://doi.org/10.1088/1361-6501/abed87

IF: 2.398

2021-04-09

Measurement Science and Technology

Abstract:Abstract Digital image correlation (DIC) is a material displacement and strain measurement technology based on visible light illumination. At high temperatures, the problem of thermal radiation seriously affects the quality of acquired images and restricts the development of high-temperature DIC technology which is increasingly applied in the field of high-temperature measurement due to stringent measurement temperature requirements. A thermal radiation elimination method based on the use of a polarization camera for high-temperature DIC measurements is proposed in this study. This method uses a polarization camera combined with a filter set to achieve clear image acquisition at 1200 °C and effectively eliminates the effects of thermal radiation on image acquisition. The gray average method and an image inverse filtering algorithm are adopted in this study to eliminate high-temperature thermal disturbances. Finally, a high-temperature DIC measurement system is independently designed, and a rigid-body displacement experiment is carried out on an FV566 steel specimen to obtain time–displacement curves. A set of uniaxial tensile tests is also performed on FV566 steel material to explore its strain field at 1200 °C.

engineering, multidisciplinary,instruments & instrumentation
Digital Image Correlation at Extreme Temperatures Using Shortwave Ultraviolet (UV-C) Lights and Filters

P. Dewanjee,M. A. Lea,L. J. Rowley,M. W. Estrada,R. K. Singh,S. Sarker,R. B. Berke

DOI: https://doi.org/10.1007/s11340-024-01044-2

IF: 2.794

2024-03-10

Experimental Mechanics

Abstract:DIC is a widely used optical method that uses cameras to track the motion of an applied random surface pattern to measure the full-field deformation. Due to its non-contacting nature, DIC is very preferable to be used in the areas of high temperature experimental mechanics. One of the biggest challenges of DIC at extreme temperatures is the blackbody radiation emitted from the glowing surface of the specimen. This glow from the blackbody radiation of the specimen is relatively higher at longer wavelengths and lower at shorter wavelengths.

mechanics,materials science, multidisciplinary, characterization & testing
Progress in Digital Image Correlation Method

Yong SU,QingChuan ZHANG,XiaoPing WU

DOI: https://doi.org/10.1360/sspma2018-00156

2018-01-01

Abstract:Photomechanics Laboratory in the University of Science and Technology of China has concentrated on principles and applications of digital image correlation (DIC) recent years. Photomechanics Laboratory not only has improved the accuracy and efficiency of DIC but also has achieved research findings on speckle pattern standardization, compensation method for 2D DIC, biomedical engineering, and serrated yielding phenomenon. This paper provides a review: (1) a theoretical model and an estimation algorithm were presented for shape function error in local deformations, and a subset size chosen criterion was presented to ensure the measurement performance; inverse compositional Gauss-Newton method using second order shape function was presented, which is two-times faster than the traditional method. (2) The inherent nature of interpolation bias was revealed, an experimental approach was developed to measure the interpolation bias, a speckle pattern assessment that considering the effects of both the systematic error and random error was presented, and a theoretical model for the speckle pattern optimization was built. (3) Compensation methods for 2D DIC based on pre-calibration were presented. (4) A system for orthognathic surgery navigation was built; full-field pulse vibration measurement system was developed. (5) The emergence and evolution of PLC band was observed, and the phenomenon of out-of-band shrink is found. The strain localization in the width-wise direction was observed using two 2D DIC systems. (6) The vibration and strain were dynamically measurement using the speckle correlation method.
On errors of digital image correlation due to speckle patterns

Bing Pan,Qian Kemao,Huimin Xie,Anand Krishna Asundi

DOI: https://doi.org/10.1117/12.839326

2009-01-01

Abstract:Digital Image Correlation (DIC) is an effective and flexible optical tool for full-field deformation measurement. Some aspects that influence the accuracy and precision of DIC have not been thoroughly investigated. A typical example is that the speckle patterns on the specimen surface as a carrier of deformation information significantly affect the measurement of DIC. The aim of this paper is to investigate the influence of speckle patterns on the displacement measurement error of the DIC. A concise theoretical model is derived, which indicates that the speckle pattern does not introduce systematic error but introduce random error in the measured displacement. Numerical experiments using five speckle patterns with distinctly different intensity distribution taken from actual experiments have been performed to validate the proposed concepts, and the results show that the standard deviation error (i.e. precision) of measured displacement are closely related to the speckle patterns and is in good agreement with the prediction of the proposed theoretical model. © 2009 SPIE.
High-temperature DIC Based on Aluminium Dihydrogen Phosphate Speckle

X. Zhu,M. Yue,Z. Qu,Y. Ma,H. Li,K. Takagi,X. Fang,X. Feng

DOI: https://doi.org/10.1016/j.measurement.2018.09.079

IF: 5.6

2018-01-01

Measurement

Abstract:Digital image correlation (DIC) method has been widely used for measurement in high temperature environment, where speckle pattern that can withstand high temperature and maintain good stability is required. In this work we develop a simple method to fabricate speckle pattern for high temperature application. The curing temperature of the speckle is controlled under 350 degrees C to avoid potential damage to the substrate material. The speckle can resist temperature up to 1050 degrees C for minimum 0.5 h. Three point bending experiment was carried out at 700 degrees C to test the speckle. Results show that this high temperature speckle exhibits excellent adhesion to the substrate. This non-invasive speckle shows great potential for improving the measurement reliability at high temperature in engineering application. (C) 2018 Elsevier Ltd. All rights reserved.
High Temperature Image Correction in DIC Measurement Due to Thermal Radiation

Shen Wang,Xue Feng Yao,Yun Quan Su,Yin Ji Ma

DOI: https://doi.org/10.1088/0957-0233/26/9/095006

2015-01-01

Abstract:In this article, the basic principle of high temperature image correction due to thermal radiation and its application in DIC high temperature measurement are investigated. First, the basic principle of high temperature image and the image gray level model due to thermal radiation are analyzed. Second, the high temperature image correction method in DIC measurement is proposed and the relationship between the gray level of high temperature image and the thermal radiation is established. Finally, the simulated high temperature image is corrected to validate the effectiveness of eliminating the thermal radiation effect in high temperature DIC, and a high temperature DIC experiment using a SiC specimen is performed to extract the high temperature displacement with high accuracy.
High-Temperature Digital Image Correlation Method for Full-Field Deformation Measurement at 1200 Degrees C

Bing Pan,Dafang Wu,Zhaoyang Wang,Yong Xia

DOI: https://doi.org/10.1088/0957-0233/22/1/015701

2010-01-01

Abstract:A simple, easy-to-implement yet effective high-temperature digital image correlation (DIC) method is established for non-contact full-field deformation measurement at elevated temperatures. The technique employs a bandpass optical filter to eliminate the influence of black-body radiation of high-temperature objects on the intensity of captured images. With the bandpass filter, high-quality digital images of an object at high temperatures up to 1200 degrees C can be easily acquired and directly compared with the reference image recorded at room temperature using the DIC technique to extract full-field deformation information with high fidelity. To verify the performance of the proposed technique, a chromium-nickel austenite stainless steel sample was heated from room temperature to 1200 degrees C using an infrared heating device, and the surface images at various temperatures were captured using the bandpass filter imaging system. Afterwards, full-field thermal deformation and coefficient of thermal expansion of the sample were determined using the DIC technique. Experimental results indicate that the proposed high-temperature DIC method is easy to implement and can be applied to practical full-field high-temperature deformation measurement with high accuracy.
Refraction error correction for deformation measurement by digital image correlation at elevated temperature

Yunquan Su,Xuefeng Yao,Shen Wang,Yinji Ma

DOI: https://doi.org/10.1117/1.OE.56.3.034106

IF: 1.3

2017-01-01

Optical Engineering

Abstract:An effective correction model is proposed to eliminate the refraction error effect caused by an optical window of a furnace in digital image correlation (DIC) deformation measurement under high-temperature environment. First, a theoretical correction model with the corresponding error correction factor is established to eliminate the refraction error induced by double-deck optical glass in DIC deformation measurement. Second, a high-temperature DIC experiment using a chromium-nickel austenite stainless steel specimen is performed to verify the effectiveness of the correction model by the correlation calculation results under two different conditions (with and without the optical glass). Finally, both the full-field and the divisional displacement results with refraction influence are corrected by the theoretical model and then compared to the displacement results extracted from the images without refraction influence. The experimental results demonstrate that the proposed theoretical correction model can effectively improve the measurement accuracy of DIC method by decreasing the refraction errors from measured full-field displacements under high-temperature environment. (C) 2017 Society of Photo-Optical Instrumentation Engineers (SPIE)
Deformation Measurement of Scaling and Rotation Objects Based on Digital Image Correlation Method with Color Information

Lianpo Wang

DOI: https://doi.org/10.3390/photonics9040237

IF: 2.536

2022-04-02

Photonics

Abstract:The digital image correlation (DIC) method is widely used in deformation measurement due to the advantages of being non-contact, high precision, full field measurement, and requiring simple experimental equipment. Traditionally, the grayscale speckle patterns captured by a monochromatic camera are used in the DIC method. With the growing development of consumer color cameras, there is a great potential for developing color information in the DIC method. This paper proposes a scaling- and rotation-invariant DIC (SRI-DIC) method based on the color speckle patterns. For the integer-pixel matching stage, the scaling- and rotation-invariant color histogram feature is used to estimate the initial value of the deformation parameters. For the sub-pixel matching stage, a new error function using the three-channel information of color camera is proposed to avoid the influence of illumination changes. In addition, this paper proposes a reverse retrieve strategy instead of the forward search to reduce the search time. Experiments show that the proposed SRI-DIC algorithm not only has scaling and rotation invariance, robustness, and high efficiency, but also that the average accuracy of the strain result can reach 0.1%.

optics
Laser speckle DIC revisited: An improved calculation scheme for large deformation measurement

Xiaoying Zhang,Yuxi Chi,Liping Yu,Qianqian Wang,Bing Pan

DOI: https://doi.org/10.1016/j.optlastec.2023.109913

IF: 4.939

2024-01-01

Optics & Laser Technology

Abstract:Laser speckles have served as an alternative to artificial speckles for digital image correlation (DIC) measurement in some cases due to the advantages of non-invasive measurement, simplicity and high efficiency in preparation. Regrettably, in using laser speckle DIC, it unavoidably encounters the notorious decorrelation problem when the object surface undergoes a relatively large motion and deformation, which will degrade the accuracy of DIC matching or even destroy the measurement. To realize large deformation measurements, the approach of updating reference image (also termed as incremental DIC) is usually adopted to mitigate the decorrelation problem of laser speckle. However, once the reference image is updated frequently during the incremental DIC calculation, additional errors due to intensity interpolation at the subpixel positions in updated reference images will accumulate over the updating times. To address this issue, an improved calculation scheme composed of incremental DIC with the nearest integer pixel offset and Gaussian pre-filtering is proposed for laser speckle DIC measurement. This involves processing the speckle images with a Gaussian low-pass filter before correlation analysis, and shifting the reference subsets in updated reference images to the nearest integer pixel positions instead of interpolating at subpixel positions during DIC calculation. Simulation tests have confirmed that this scheme effectively mitigates accumulated interpolation errors. Several real tests, including in-plane translation, uniaxial tensile, and high-temperature tests, also demonstrated the effectiveness of this scheme in eliminating the decorrelation issue in laser speckle DIC.

optics,physics, applied
Design and Application of Digital Speckle Patterns in Digital Image Correlation Method

Qian Wei,Jiang Ming

DOI: https://doi.org/10.37188/yjyxs20203508.0861

2020-01-01

Abstract:Aiming at the digital image correlation (DIC) experiment, ordinary paint speckle can not meet the requirement of ultra-high temperature environment, the method of designing and transferring the digital speckle patterns (DSPs) is studied. The design of the digital speckle patterns determine the circle center coordinates of each speckle by matrix transformation, and then a random degree is applied to each circle center coordinate, and it is programmed by Matlab. The laser marking technology is used to transfer it to the surface of the test piece. The accuracy of speckles are analyzed by roundness and area ratio, and the paint speckles and DSPs are compared and analyzed by the average speckle gradient method. The results show that the accuracy of DSPs transferred by laser marking technology is higher than that of ordinary spray paint speckle, and the quality is stable. The DSPs is used in the high-temperature welding test. In the test, the speckle is deformed along with the test piece, and no phenomena such as shedding and melting under high-temperature occurred.
Change of exposure time mid-test in high temperature DIC measurement

Thinh Q Thai,Adam J Smith,Robert J Rowley,Paul R Gradl,Ryan B Berke

DOI: https://doi.org/10.1088/1361-6501/ab7bbf

IF: 2.398

2020-04-27

Measurement Science and Technology

Abstract:Abstract Performing digital image correlation (DIC) at extreme temperatures has been greatly challenging due to the radiation which saturates the camera sensor. At such high temperatures, the light intensity emitted from an object is occasionally so powerful that the acquired images are overwhelmingly saturated. This induces data loss, potentially ruining the test, thus requiring the user to restart the test. For this reason, selection of an appropriate camera sensitivity plays a crucial role prior to beginning the test. Exposure time is a factor contributing to camera sensitivity and it is the easiest setting to manipulate during the test since it introduces minimal errors when comparing to other factors, especially in quasi-static tests. This paper examines the influence of changing exposure time mid-test on DIC measurement uncertainty. The investigation was conducted by rigid body motion experiments at room temperature and 1600 °C, respectively. Thereby, some recommendations are given to help DIC users assess their images at room temperature to extrapolate the exposure at extreme temperatures along with accompanying solutions to salvage data at high temperature.

engineering, multidisciplinary,instruments & instrumentation
Color crosstalk correction for synchronous measurement of full-field temperature and deformation

Mengkun Yue,Jinyang Wang,Jinsong Zhang,Yao Zhang,Yunlong Tang,Xue Feng

DOI: https://doi.org/10.1016/j.optlaseng.2021.106878

IF: 5.666

2022-03-01

Optics and Lasers in Engineering

Abstract:Synchronous measurement of temperature and deformation at elevated temperatures based on the noncontact optical method can be achieved through the allocation of channels R, G, and B for a color camera. Channels R and G are used for the radiation-based temperature measurement, while channel B is adopted for the deformation measurement. However, the existence of color crosstalk, which is mainly caused by the color camera's spectral response and the use of the narrow-band filtering technique, has a significant influence on the accuracy of temperature and deformation calculations. In this work, the color crosstalk effect in high-temperature optical imaging is analyzed, and a crosstalk correction algorithm based on grayscale calibration is performed on the different color channels (channels R, G, and B) of the color image. By solving the calibration equations, three corrected color channels are generated for a high-precision temperature and deformation calculation. A flame heating experiment of a C/SiC material up to 1100 °C is carried out to validate the applicability accuracy of the proposed method. The results show that the proposed method can effectively eliminate the color crosstalk between different channels and provide a non-contact, full-field, and synchronous measurement of temperature and deformation with higher accuracy than the existing methods.

optics
The Feasibility and Application of Gray Scale Adjustment Method in High Temperature Digital Image Correlation

Shen Wang,Xue Feng Yao,Yun Quan Su,Wei Liu

DOI: https://doi.org/10.1088/1361-6501/aa4fca

IF: 2.398

2016-01-01

Measurement Science and Technology

Abstract:In this paper, the basic principle and application of linear gray scale adjustment method are investigated in high temperature digital image correlation (DIC) technology. First, the simple linear gray scale adjustment method is proposed, which can adjust the gray scale value of the saturated pixels and diminish the correlation error caused by the saturated pixels. Then, both the simulated high temperature images and DIC correlation results before and after the gray scale adjustment are provided and analyzed to verify its effectiveness, in which the displacement error decreased from 0.1 pixels to 0.04 pixels after the linear gray scale adjustment for high temperature images. Finally, the linear gray scale adjustment method is used to extract the displacement with high accuracy in high temperature experiment of SiC specimen, and the displacement error decreased from 0.5 pixels to 0.1 pixels after the linear gray scale adjustment.
Correction of thermal airflow distortion in warpage measurements of microelectronic packaging structures via deep learning-based digital image correlation

Yuhan Gao,Yuxin Chen,Ziniu Yu,Chuanguo Xiong,Xin Lei,Weishan Lv,Sheng Liu,Fulong Zhu

DOI: https://doi.org/10.1038/s41378-024-00764-8

2024-08-26

Abstract:The projected speckle-based three-dimensional digital image correlation method (3D-DIC) is being increasingly used in the reliability measurement of microelectronic packaging structures because of its noninvasive nature, high precision, and low cost. However, during the measurement of the thermal reliability of packaging structures, the thermal airflow generated by heating introduces distortions in the images captured by the DIC measurement system, impacting the accuracy and reliability of noncontact measurements. To address this challenge, a thermal airflow distortion correction model based on the transformer attention mechanism is proposed specifically for the measurement of thermal warpage in microelectronic packaging structures. This model avoids the oversmoothing issue associated with convolutional neural networks and the lack of physical constraints in generative adversarial networks, ensuring the precision of grayscale gradient changes in speckle patterns and minimizing adverse effects on DIC calculation accuracy. By inputting the distorted images captured by the DIC measurement system into the network, corrected images are obtained for 3D-DIC calculations, thus allowing the thermal warpage measurement results of the sample to be acquired. Through experiments measuring topography with customized step block specimens, the effectiveness of the proposed method in improving warpage measurement accuracy is confirmed; this is particularly true when captured images are affected by thermal airflow at 140 °C and 160 °C, temperatures commonly encountered in thermal reliability testing of packaging structures. The method successfully reduces the standard deviation from 9.829 to 5.943 µm and from 12.318 to 6.418 µm, respectively. The results demonstrate the substantial practical value of this method for measuring thermal warpage in microelectronic packaging structures.
Snapshot Compressive Imaging Based Digital Image Correlation: Temporally Super-Resolved Full-Resolution Deformation Measurement.

Wenwu Chen,Bo Zhang,Liuning Gu,Haibo Liu,Jinli Suo,Xinxing Shao

DOI: https://doi.org/10.1364/oe.469422

IF: 3.8

2022-01-01

Optics Express

Abstract:The limited throughput of a digital image correlation (DIC) system hampers measuring deformations at both high spatial resolution and high temporal resolution. To address this dilemma, in this paper we propose to integrate snapshot compressive imaging (SCI)-a recently proposed computational imaging approach-into DIC for high-speed, high-resolution deformation measurement. Specifically, an SCI-DIC system is established to encode a sequence of fast changing speckle patterns into a snapshot and a high-accuracy speckle decompress SCI (Sp-DeSCI) algorithm is proposed for computational reconstruction of the speckle sequence. To adapt SCI reconstruction to the unique characteristics of speckle patterns, we propose three techniques under SCI reconstruction framework to secure high-precision reconstruction, including the normalized sum squared difference criterion, speckle-adaptive patch search strategy, and adaptive group aggregation. For efficacy validation of the proposed Sp-DeSCI, we conducted extensive simulated experiments and a four-point bending SCI-DIC experiment on real data. Both simulation and real experiments verify that the Sp-DeSCI successfully removes the deviations of reconstructed speckles in DeSCI and provides the highest displacement accuracy among existing algorithms. The SCI-DIC system together with the Sp-DeSCI algorithm can offer temporally super-resolved deformation measurement at full spatial resolution, and can potentially replace conventional high-speed DIC in real measurements.
Digital Image Correlation with a Prism Camera and Its Application in Complex Deformation Measurement

Hao Hu,Boxing Qian,Yongqing Zhang,Wenpan Li

DOI: https://doi.org/10.3390/s23125531

IF: 3.9

2023-06-13

Sensors

Abstract:Given the low accuracy of the traditional digital image correlation (DIC) method in complex deformation measurement, a color DIC method is proposed using a prism camera. Compared to the Bayer camera, the Prism camera can capture color images with three channels of real information. In this paper, a prism camera is used to collect color images. Relying on the rich information of three channels, the classic gray image matching algorithm is improved based on the color speckle image. Considering the change of light intensity of three channels before and after deformation, the matching algorithm merging subsets on three channels of a color image is deduced, including integer-pixel matching, sub-pixel matching, and initial value estimation of light intensity. The advantage of this method in measuring nonlinear deformation is verified by numerical simulation. Finally, it is applied to the cylinder compression experiment. This method can also be combined with stereo vision to measure complex shapes by projecting color speckle patterns.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

Risperidone: a once-daily dosage schedule.

Speckle Pattern Inversion in High Temperature DIC Measurement

Improvement on Measurement Accuracy of High-Temperature DIC by Grayscale-Average Technique

Impact of Speckle Deformability on Digital Imaging Correlation

Thermal radiation elimination method for high-temperature digital image correlation using polarization camera

Digital Image Correlation at Extreme Temperatures Using Shortwave Ultraviolet (UV-C) Lights and Filters

Progress in Digital Image Correlation Method

On errors of digital image correlation due to speckle patterns

High-temperature DIC Based on Aluminium Dihydrogen Phosphate Speckle

High Temperature Image Correction in DIC Measurement Due to Thermal Radiation

High-Temperature Digital Image Correlation Method for Full-Field Deformation Measurement at 1200 Degrees C

Refraction error correction for deformation measurement by digital image correlation at elevated temperature

Deformation Measurement of Scaling and Rotation Objects Based on Digital Image Correlation Method with Color Information

Laser speckle DIC revisited: An improved calculation scheme for large deformation measurement

Design and Application of Digital Speckle Patterns in Digital Image Correlation Method

Change of exposure time mid-test in high temperature DIC measurement

Color crosstalk correction for synchronous measurement of full-field temperature and deformation

The Feasibility and Application of Gray Scale Adjustment Method in High Temperature Digital Image Correlation

Correction of thermal airflow distortion in warpage measurements of microelectronic packaging structures via deep learning-based digital image correlation

Snapshot Compressive Imaging Based Digital Image Correlation: Temporally Super-Resolved Full-Resolution Deformation Measurement.

Digital Image Correlation with a Prism Camera and Its Application in Complex Deformation Measurement