OpenNebula: Leading Innovation in Cloud Computing Management

I. Llorente,R. Montero

Abstract:

What problem does this paper attempt to address?

3-D Motion Imaging in a Multipath Coordinate Space Based on a TDM-MIMO Radar Sensor

Yi Zhang,Chengkai Zhu,Shuqin Dong,Zhitao Gu,Marcel Balle,Bin Zhang,Changzhi Li,Lixin Ran

DOI: https://doi.org/10.1109/tmtt.2020.3025563

IF: 4.3

2020-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:To date, 3-D radar imaging of moving objects in a multipath coordinate space close to antennas remains a technical challenge. In this work, we demonstrate the implementation of such 3-D motion imaging based on a continuous-wave, multiple-input multiple-output (MIMO) Doppler radar sensor (DRS). Working with a time-division-multiplex (TDM) scheme, this portable, cost-effective DRS is a bistatic system with one transmitting and one receiving channels, and a radio frequency (RF) switch in each channel toggling between two antennas. Assisted by algorithms specifically derived for the TDM-MIMO architecture, highly sensitive 3-D imaging performed in a multipath indoor environment was experimentally implemented. Numerical simulations and experimental demonstrations verified the effectiveness and accuracy of the proposed approach.
3D Localization and Tracking Methods for Multi-Platform Radar Networks

Angela Marino,Giovanni Soldi,Domenico Gaglione,Augusto Aubry,Paolo Braca,Antonio De Maio,Peter Willett

2023-08-14

Abstract:Multi-platform radar networks (MPRNs) are an emerging sensing technology due to their ability to provide improved surveillance capabilities over plain monostatic and bistatic systems. The design of advanced detection, localization, and tracking algorithms for efficient fusion of information obtained through multiple receivers has attracted much attention. However, considerable challenges remain. This article provides an overview on recent unconstrained and constrained localization techniques as well as multitarget tracking (MTT) algorithms tailored to MPRNs. In particular, two data-processing methods are illustrated and explored in detail, one aimed at accomplishing localization tasks the other tracking functions. As to the former, assuming a MPRN with one transmitter and multiple receivers, the angular and range constrained estimator (ARCE) algorithm capitalizes on the knowledge of the transmitter antenna beamwidth. As to the latter, the scalable sum-product algorithm (SPA) based MTT technique is presented. Additionally, a solution to combine ARCE and SPA-based MTT is investigated in order to boost the accuracy of the overall surveillance system. Simulated experiments show the benefit of the combined algorithm in comparison with the conventional baseline SPA-based MTT and the stand-alone ARCE localization, in a 3D sensing scenario.

Signal Processing
Measurement based dimension descent association algorithm for OTHR multi-detection multi-target tracking

Yujie Zhang,Zheng Zhang,Jianglong Yu,Qingdong Li,Xiwang Dong,Zhang Ren

DOI: https://doi.org/10.1016/j.isatra.2023.05.016

IF: 7.3

2023-05-27

ISA Transactions

Abstract:Highlights • Multi-detection multi-target tracking problem using over-the-horizon radar is studied by dimension descent association. • The detection of new-born targets with unknown prior knowledge is considered. • The convergence of the proposed multi-detection multi-target tracking algorithm is analyzed. • The labeled extended Kalman Gaussian mixture probability hypothesis density algorithm is proposed to reduce the computational burden. The problem of multi-detection multi-target tracking (MDMTT) using over-the-horizon radar in dense clutter environment is studied in this paper. The biggest challenge of MDMTT is the 3-dimensional multipath data association among measurements, detection models and targets. In particular, a lot of clutter measurements are generated in dense clutter environment, which increase the computational burden of 3-dimensional multipath data association greatly. A measurement based dimension descent association (DDA) algorithm is proposed to solve the 3-dimensional multipath data association, which decomposes the 3-dimensional multipath data association into two 2-dimensional data associations. The proposed algorithm can reduce the computational burden compared with the optimal 3-dimensional multipath data association and the computational complexity is analyzed. Besides, a time extension method is designed to detect the new-born targets that appear in the tracking scene, which is based on the sequential measurements. The convergence of the proposed measurement based DDA algorithm is analyzed. The estimation error can convergence to 0 as the number of Gaussian mixtures tends to infinity. The effectiveness and rapidity of the measurement based DDA algorithm are demonstrated by the comparative simulation with the previously proposed algorithms.

automation & control systems,instruments & instrumentation,engineering, multidisciplinary
3D Multi-Object Tracking Based on Radar-Camera Fusion

Zihao Lin,Jianming Hu

DOI: https://doi.org/10.1109/itsc55140.2022.9921931

2022-01-01

Abstract:Multi-target tracking is the cornerstone of autonomous driving. Only on this basis can we achieve tracking and path planning. Detection problem is an important part of environment perception system. Therefore, it has become a hot spot in related fields such as computer vision and autonomous driving. 3D object detection adds more information than 2D object detection, such as size, depth, pose, etc. However, the 3D information obtained based on the image, especially the depth, is very inaccurate, so that the detection frame information has a large deviation. The trajectory tracking ability based on these detection results is also reduced accordingly. Our research proposes a method to detect 3D information by combining data from cameras and mmWave radar. We then apply this result to the multi-object tracking problem. It achieves a MOTA of 70.0 and a IDF1 of 73.1 on the NuScenes dataset.
Multi-Object Tracking based on Imaging Radar 3D Object Detection

Patrick Palmer,Martin Krüger,Richard Altendorfer,Torsten Bertram

2024-06-03

Abstract:Effective tracking of surrounding traffic participants allows for an accurate state estimation as a necessary ingredient for prediction of future behavior and therefore adequate planning of the ego vehicle trajectory. One approach for detecting and tracking surrounding traffic participants is the combination of a learning based object detector with a classical tracking algorithm. Learning based object detectors have been shown to work adequately on lidar and camera data, while learning based object detectors using standard radar data input have proven to be inferior. Recently, with the improvements to radar sensor technology in the form of imaging radars, the object detection performance on radar was greatly improved but is still limited compared to lidar sensors due to the sparsity of the radar point cloud. This presents a unique challenge for the task of multi-object tracking. The tracking algorithm must overcome the limited detection quality while generating consistent tracks. To this end, a comparison between different multi-object tracking methods on imaging radar data is required to investigate its potential for downstream tasks. The work at hand compares multiple approaches and analyzes their limitations when applied to imaging radar data. Furthermore, enhancements to the presented approaches in the form of probabilistic association algorithms are considered for this task.

Robotics,Artificial Intelligence,Computer Vision and Pattern Recognition
Feature-aided Multi-Target Tracking Method in Sea Clutter Using Scanning Radar Data

Zhen Wang,Yingpei Zhu,Weidong Chen,Yupei Yin

DOI: https://doi.org/10.1109/ICSIP52628.2021.9688716

2021-10-22

Abstract:Maritime multi-target tracking (MTT) is an important application scenario of radar target tracking technology, but it still faces huge challenges such as the interference of sea clutter and the fluctuation of target echoes, which leading to the trajectory fragmentation. Additionally, due to radar scanning, targets are extended in azimuth and cannot be regarded as point targets. In this paper, we construct the feature vector by combining the radar echo data with the extension estimation of targets obtained by gamma Gaussian inverse Wishart-probability hypothesis density (GGIW-PHD) filter. Then, the echo features of targets are introduced into MHT framework and trajectory management module, aiming to reduce trajectory fragmentation and improve the integrity of target trajectory. Finally, the effectiveness of the proposed method is verified by measured data.

Environmental Science,Engineering
Suboptimum Low Complexity Joint Multi-target Detection and Localization for Noncoherent MIMO Radar with Widely Separated Antennas

Wei Yi,Tao Zhou,Mingchi Xie,Yue Ai,Rick S. Blum

DOI: https://doi.org/10.48550/arXiv.1701.01532

2017-01-06

Abstract:In this paper, the problems of simultaneously detecting and localizing multiple targets are considered for noncoherent multiple-input multiple-output (MIMO) radar with widely separated antennas. By assuming a prior knowledge of target number, an optimal solution to this problem is presented first. It is essentially a maximum-likelihood (ML) estimator searching parameters of interest in a high dimensional space. However, the complexity of this method increases exponentially with the number G of <a class="link-external link-http" href="http://targets.Besides" rel="external noopener nofollow">this http URL</a>, without the prior information of the number of targets, a multi-hypothesis testing strategy to determine the number of targets is required, which further complicates this method. Therefore, we split the joint maximization into G disjoint optimization problems by clearing the interference from previously declared targets. In this way, we derive two fast and robust suboptimal solutions which allow trading performance for a much lower implementation complexity which is almost independent of the number of targets. In addition, the multi-hypothesis testing is no longer required when target number is unknown. Simulation results show the proposed algorithms can correctly detect and accurately localize multiple targets even when targets share common range bins in some paths.

Information Theory
Tracking of Multiple Static and Dynamic Targets for 4D Automotive Millimeter-Wave Radar Point Cloud in Urban Environments

Bin Tan,Zhixiong Ma,Xichan Zhu,Sen Li,Lianqing Zheng,Libo Huang,Jie Bai

DOI: https://doi.org/10.3390/rs15112923

IF: 5

2023-06-04

Remote Sensing

Abstract:This paper presents a target tracking algorithm based on 4D millimeter-wave radar point cloud information for autonomous driving applications, which addresses the limitations of traditional 2 + 1D radar systems by using higher resolution target point cloud information that enables more accurate motion state estimation and target contour information. The proposed algorithm includes several steps, starting with the estimation of the ego vehicle's velocity information using the radial velocity information of the millimeter-wave radar point cloud. Different clustering suggestions are then obtained using a density-based clustering method, and correlation regions of the targets are obtained based on these clustering suggestions. The binary Bayesian filtering method is then used to determine whether the targets are dynamic or static targets based on their distribution characteristics. For dynamic targets, Kalman filtering is used to estimate and update the state of the target using trajectory and velocity information, while for static targets, the rolling ball method is used to estimate and update the shape contour boundary of the target. Unassociated measurements are estimated for the contour and initialized for the trajectory, and unassociated trajectory targets are selectively retained and deleted. The effectiveness of the proposed method is verified using real data. Overall, the proposed target tracking algorithm based on 4D millimeter-wave radar point cloud information has the potential to improve the accuracy and reliability of target tracking in autonomous driving applications, providing more comprehensive motion state and target contour information for better decision making.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Observability-Based Gaussian Sum Cubature Kalman Filter for Three-Dimensional Target Tracking Using a Single Two-Dimensional Radar

Haonan Jiang,Yingjie Zhang,Xiaotong Wang,Yuanli Cai

DOI: https://doi.org/10.3390/rs16224172

IF: 5

2024-11-09

Remote Sensing

Abstract:This paper considers the problem of tracking a three-dimensional target under the condition that only a single two-dimensional radar is available. Since a two-dimensional radar can only measure the slant range and azimuth information relative to the target, an unobservability issue arises in this tracking application. Therefore, we first investigate the observability issue of tracking a three-dimensional target with a single two-dimensional radar from two perspectives, including intuitive illustration and quantitative analysis. From the perspective of intuitive illustration, we demonstrate "What is the unobservability issue" and "How does the relative target-radar geometry influence the observability of the tracking system". From the perspective of quantitative analysis, we construct a novel observability metric for this special tracking problem. Second, aiming at improving tracking performance under the unobservability of target height, we propose an observability-based Gaussian sum cubature Kalman filter. Built within the Gaussian sum framework and based on the height-parameterized strategy, this novel algorithm uses a set of independent fifth-degree cubature Kalman filters, each of which can detect the system observability variation and enhance the tracking accuracy by using a Gaussian splitting scheme under low-degree observability. Finally, the effectiveness of the presented filtering algorithm is validated through lots of simulation experiments.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Mmtai: Biometrics-assisted Multi-person Tracking with Mmwave Radar

Yande Chen,Yuan He,Yimiao Sun,Awais Ahmad Siddiqi,Jia Zhang,Xiuzhen Guo

DOI: https://doi.org/10.1109/icpads63350.2024.00014

2024-01-01

Abstract:Wave-based human tracking is a key enabling technology for smart applications. Most of the existing works on this topic employ the conventional approach of device-free object localization, which treat any person as a general moving target rather than distinguish different persons. As a result, the existing approaches have poor performance in the scenarios of multi-person tracking, especially when there are crossovers among different persons’ trajectories. This paper presents mMTAI, a novel approach for multi-person tracking with a mmWave radar. By exploiting mmWave sensing to capture a human’s biometric features, MMTAI augments mmWave radar based human tracking with the ability of identifying different persons. Specifically, MMTAI is able to sense persons’ scalp responses to the signals and their head-shoulder distances, which are then continuously mapped to their trajectories using a bipartite matching algorithm. We implement MMTAI with a commercial mmWave radar and evaluate its performance under various settings. The results show that in the multi-person tracking scenarios, mmTAI has a median tracking error of 12.33 cm, which is $35.88 \%$ lower than that of the state-of-the-art approach.
Continuous Tracking of Indoor Human Targets Based on Millimeter Wave Radar

Haolan Luo,Shisheng Guo,G. Cui,Meiqiu Jiang

DOI: https://doi.org/10.23919/APSIPAASC55919.2022.9979904

2022-11-07

Abstract:The effect of target tracking based on millime-ter wave radar is susceptible to multi path effect and target crossover. Most existing methods are unsatisfactory in high-noise, complex environments. In contrast, we propose a method covering target positioning, tracking, and track re-association by using top-mounted millimeter-wave radar, achieving stable and accurate counting and tracking of multiple targets. First, a polar-coordinate- based tracking is performed using an extended Kalman filter with linear regression correction. Then, a density-based classification algorithm with group signal-to-noise ratio analysis is performed to remove ghost targets. In terms of the track fracture problem caused by the target intersection, we propose to use the Hankel matrix to solve this situation. Our experiments prove the robustness of the proposed method, which not only has a high tracking precision within O.lm but also successfully handles most target crossover situations considered. At the same time, in the cases within six people, the ratio between the number of frames in which personnel counting error is less than or equal to 1 and the total number of frames is more than 95%.

Physics,Engineering
Tracking of Radar Targets With In-Band Wireless Communication Interference in RadComm Spectrum Sharing

Gunnery Srinath,Bethi Pardhasaradhi,Prashantha Kumar H.,Pathipati Srihari

DOI: https://doi.org/10.1109/access.2022.3159623

IF: 3.9

2022-01-01

IEEE Access

Abstract:Radar and communication system (RadComm) spectrum sharing has received considerable attention from the research community in recent years. This paper considers the distributed radars present in the surveillance region with multiple in-band wireless communication transmitters (IWCTs). A new measurement model is proposed by considering both radar returns and returns due to IWCTs. The tracking performance is evaluated using the global nearest neighbor (GNN) tracker with an extended Kalman filter (EKF) for the received measurement set. A single radar case is considered, where near geometry scenario (IWCTs are placed near the radar and target) and far-geometry scenario (IWCTs are placed far from the radar and target) are considered to evaluate the tracking performance. It is observed that a large number of tracks are resulted due to IWCTs, and identifying the actual target track is ambiguous in a single radar case. Therefore, in the second case, multiple radars are placed to investigate the problem comprehensively. The track-to-track association (T2TA) is performed to identify the true target track on multiple tracks produced owing to the presence of IWCTs and the resulting tracks from all radars pertaining to the true targets. Once the true target tracks from each radar are identified, using the T2TA, the track-to-track fusion (T2TF) is carried out to improve the estimates of the true target. The simulation results are quantified with position root mean square error (PRMSE). The posterior Cramer–Rao lower bounds (PCRLBs) quantifying the achievable estimation accuracies are also presented. The simulation results reveal that the association and fusion of tracks from multiple radars identify the true target track with good accuracy and overcome the inability to determine the true track, as in the case of a single radar. Further, the results disclose that, as the number of radars increases, the T2TA and fusion improved the PRMSE.

computer science, information systems,telecommunications,engineering, electrical & electronic
Multi-sensor Spatial Association using Joint Range-Doppler Features

Anant Gupta,Ahmet Dundar Sezer,Upamanyu Madhow

DOI: https://doi.org/10.1109/TSP.2021.3119418

2024-09-30

Abstract:We investigate the problem of localizing multiple targets using a single set of measurements from a network of radar sensors. Such "single snapshot imaging" provides timely situational awareness, but can utilize neither platform motion, as in synthetic aperture radar, nor track targets across time, as in Kalman filtering and its variants. Associating measurements with targets becomes a fundamental bottleneck in this setting. In this paper, we present a computationally efficient method to extract 2D position and velocity of multiple targets using a linear array of FMCW radar sensors by identifying and exploiting inherent geometric features to drastically reduce the complexity of spatial association. The proposed framework is robust to detection anomalies, and achieves order of magnitude lower complexity compared to conventional methods. While our approach is compatible with conventional FFT-based range-Doppler processing, we show that more sophisticated techniques for range-Doppler estimation lead to reduced data association complexity as well as higher accuracy estimates of target positions and velocities.

Signal Processing
Radar nonlinear multi-target tracking method with parallel PHD filter

Jin Tao,Defu Jiang,Jialin Yang,Yan Han,Song Wang,Xingchen Lu

DOI: https://doi.org/10.1038/s41598-024-56065-7

IF: 4.6

2024-03-06

Scientific Reports

Abstract:Since probability hypothesis density (PHD) filters do not need explicit data association, they have recently been widely used in radar multi-target tracking (MTT). However, in existing PHD filters, sampling times are generally considered the same for all targets. Due to the limitation of antenna beam width in radar applications, the same sampling time for all targets will lead to a mismatch between the predicted data and measurement data, reducing the accuracy of radar MTT. In order to eliminate the estimation error with less computational cost, a radar nonlinear multi-target tracking method with a parallel PHD filter is proposed in this article. The measurement area is divided into several subspaces according to the beam width of the radar antenna, and the PHD of all subspaces is calculated in parallel. Then, multi-feature information in radar echo assists tracking and improves real-time performance. Experimental results in various scenarios illustrate that the proposed method can eliminate the estimation errors introduced by sampling time diversity at the cost of less computation cost, especially in cluttered environments.

multidisciplinary sciences
Joint tracking sequence and dwell time allocation for multi-target tracking with phased array radar

Ye Yuan,Wei Yi,Lingjiang Kong

DOI: https://doi.org/10.1016/j.sigpro.2021.108374

IF: 4.729

2022-03-01

Signal Processing

Abstract:Phased array radars (PAR) are demonstrated to provide enhanced performance for target tracking due to their agile beamforming. In this paper, a joint tracking sequence and dwell time allocation (JTSDTA) strategy is proposed for multi-target tracking (MTT) based on a PAR system. At its core, for the first time, the implementations of target tracking and searching are considered to be interleaved, and the effect of the revisit time on the tracking performance is emerged when arranging the sequence of target tracking. In this context, a time-aware posterior Cramér–Rao lower bound is presented to quantify the individual tracking performance. Then, the JTSDTA is formulated as an optimization problem with respect to the coupled integer and continuous variables. A two steps-based decoupling algorithm is proposed to solve the problem efficiently. Numerical simulations are presented to demonstrate the validity of the proposed JTSDTA strategy.

engineering, electrical & electronic
Multitarget Bistatic MIMO RADAR

Nadeem Dar,Athanassios Manikas

2024-11-04

Abstract:This paper is concerned with the investigation of the bistatic MIMO radar for estimating various multitarget parameters of interest in the presence of clutter and noise. The parameters of interest include Direction of Departure (DOD), Direction of Arrival (DOA), range and velocity and a novel algorithm is proposed for estimating these target parameters based on the concepts of the "array manifold" and "manifold extenders". The performance of the proposed algorithm is evaluated using Monte Carlo simulation studies.

Signal Processing
Multipath-Assisted Multitarget Tracking With Better Track Formation

Aranee Balachandran,Aalok Acharya,Sunil Chomal,Ratnasingham Tharmarasa

DOI: https://doi.org/10.1109/taes.2024.3360012

IF: 3.491

2024-01-01

IEEE Transactions on Aerospace and Electronic Systems

Abstract:This paper analyzes the utilization of multipath measurements in multitarget tracking to achieve a better track formation in the presence of false alarms, missed detections and a known reflection surface for automotive applications. In complex urban environments, the transmitted signal of the automotive radar gets scattered or reflected and creates multipath returns, which are undesirable in tracking as they generate false tracks and degrade the tracking performance. In this paper, a technique is proposed not only to mitigate but also to leverage multipath returns to improve the tracking performance. Target-to-measurement and measurement-to- propagation association uncertainties need to be resolved in order to incorporate the multipath returns. Although the standard data association could partially handle these uncertainties for already initialized tracks, a joint approach that considers track initialization with data association is required to eliminate the redundant track formation with multipath. Therefore, a multiframe assignment technique that jointly considers both track initialization and data association is proposed in this work. The performance of the proposed algorithm is compared with two other approaches. The simulation results show that the proposed algorithm can handle the multipath efficiently.

telecommunications,engineering, electrical & electronic, aerospace
6D Radar Technology in Monostatic Integrated Sensing and Communications System

Hongliang Luo,Feifei Gao,Fan Liu,Shi Jin

DOI: https://doi.org/10.1109/iccc62479.2024.10682025

2024-01-01

Abstract:We propose a novel scheme for six-dimensional (6D) radar sensing and tracking of dynamic target based on monostatic integrated sensing and communications system. Unlike most studies believing that only the radial velocity of far-field target can be measured based on single base station (BS), we find that the sensing echo channel of massive MIMO system actually includes the distance, horizontal angle, pitch angle, radial velocity, horizontal angular velocity, and pitch angular velocity of target, and thus we may rely on single BS to estimate target’s 6D parameters. Specifically, we propose long-term motion and short-term motion model of dynamic target, which serve multiple-shots tracking and single-shot sensing of target, respectively. Then we derive the sensing channel corresponding to the short-term motion. Next, for single-shot sensing, we employ the array signal processing methods to estimate the target’s horizontal angle, pitch angle, distance, and virtual velocity. By realizing that the virtual velocities observed by different antennas are different, we adopt plane fitting to estimate the radial velocity, horizontal angular velocity, and pitch angular velocity of target. Furthermore, we implement the multiple-shots tracking based on each single-shot sensing results and Kalman filtering. Simulation results demonstrate the effectiveness of the proposed 6D radar scheme.
Resistance of Aedes aegypti (Diptera: Culicidae) in 2006 to pyrethroid insecticides in Indonesia and its association with oxidase and esterase levels.

I. Ahmad,S. Astari,M. Tan

DOI: https://doi.org/10.3923/PJBS.2007.3688.3692

2007-10-15

Pakistan Journal of Biological Sciences

Abstract:Three strains of Aedes aegypti collected in 2006 from three major cities in Indonesia, i.e., Bandung, Palembang and Surabaya, were tested to determine their resistance status to pyrethroid (permethrin and deltamethrin) and also the resistance mechanisms regarding three detoxifying enzymes, i.e., oxidase, esterase A and esterase B. The resistance level was expressed as Resistance Ratio (RR) compared to the susceptible VCRU strain. Results of this study showed that Ae. aegypti in Indonesia has developed tolerance to permethrin and deltamethrin, except in the Bandung strain, which was resistant to permethrin and deltametherin with RR90 79.3 and 23.7, respectively. The study also suggested that detoxifying enzymes (oxidase, esterase A and esterase B) apparently were involved in the development of resistance in Bandung strain as indicated by the high level of activity of those enzymes in Bandung strain compared to other more susceptible strains. Although there is a possibility that other mechanisms, such as a target-site resistance mechanism, in Bandung strain were also involved.

OpenNebula: Leading Innovation in Cloud Computing Management

3-D Motion Imaging in a Multipath Coordinate Space Based on a TDM-MIMO Radar Sensor

3D Localization and Tracking Methods for Multi-Platform Radar Networks

Measurement based dimension descent association algorithm for OTHR multi-detection multi-target tracking

3D Multi-Object Tracking Based on Radar-Camera Fusion

Multi-Object Tracking based on Imaging Radar 3D Object Detection

Feature-aided Multi-Target Tracking Method in Sea Clutter Using Scanning Radar Data

Suboptimum Low Complexity Joint Multi-target Detection and Localization for Noncoherent MIMO Radar with Widely Separated Antennas

Tracking of Multiple Static and Dynamic Targets for 4D Automotive Millimeter-Wave Radar Point Cloud in Urban Environments

Observability-Based Gaussian Sum Cubature Kalman Filter for Three-Dimensional Target Tracking Using a Single Two-Dimensional Radar

Mmtai: Biometrics-assisted Multi-person Tracking with Mmwave Radar

Continuous Tracking of Indoor Human Targets Based on Millimeter Wave Radar

Tracking of Radar Targets With In-Band Wireless Communication Interference in RadComm Spectrum Sharing

Multi-sensor Spatial Association using Joint Range-Doppler Features

Radar nonlinear multi-target tracking method with parallel PHD filter

Joint tracking sequence and dwell time allocation for multi-target tracking with phased array radar

Multitarget Bistatic MIMO RADAR

Multipath-Assisted Multitarget Tracking With Better Track Formation

6D Radar Technology in Monostatic Integrated Sensing and Communications System

Resistance of Aedes aegypti (Diptera: Culicidae) in 2006 to pyrethroid insecticides in Indonesia and its association with oxidase and esterase levels.