Abstract:In the present study, a maleic acid-functionalized exfoliated graphite/calcium hydroxide (MA-EG/Ca(OH) 2 ) was constructed and employed as a novel inorganic–organic nanocomposite for an efficient dispersive solid-phase microextraction (DSPME) of trace levels of sunset yellow (SY), a synthetic food dye in foodstuff samples before UV–Vis determination. To identify and characterize of the sorbent, various analytical techniques were utilized, including, Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), and Brunauer-Emmett-Teller (BET) analyses. The MA-EG/Ca(OH) 2 exhibited a specific surface area of 40.35 m 2 g −1 and adsorption capacity of 46.72 mg g −1 towards SY. Central composite design (CCD) in conjunction with a response surface methodology (RSM)-based ANOVA analysis was applied for evaluation and optimization of effective factors including pH (X 1 ), sorbent mass (X 2 ), contact time (X 3 ), and elution volume (X 4 ). According to the results, the optimum values were pH: 6.0, sorbent mass: 12 mg, contact time: 12 min, and elution volume: 0.18 μL. Under theses optimized conditions, DSPME/UV–Vis determination demonstrated a linear range of 50–4800 ng mL −1 , a limit of detection (LOD) of 12.45 ng mL −1 , and a limit of quantification (LOQ) of 41.49 ng mL −1 (n = 3). The relative standard deviation (RSD) at low concentration level (50–500 ng mL −1 ) of SY was 4.58 %. Recovery values in different concentration levels were in the range of 96.4–102.9 %. Overall, the proposed method showed the superior features, including ease of synthesizing the sorbent, acceptable LOD and LOQ values, remarkable sensitivity, a wide operational range, good reusability (up to five cycles), environmentally friendly as well as cost-effectiveness, that make it a promising candidate for the analysis of SY in foodstuff samples.

Optimization of square wave voltammetry parameters by response surface methodology for the determination of Sunset yellow using an electrochemical sensor based on Purpald®

A Zinc Oxide Nanoflower-Based Electrochemical Sensor For Trace Detection Of Sunset Yellow

Voltammetric Sensor Based on the Combination of Tin and Cerium Dioxide Nanoparticles with Surfactants for Quantification of Sunset Yellow FCF

Determination of Sunset yellow in foods based on a facile electrochemical sensor

A Sensitive Electroanalytical Sensor Amplified with Pd-ZnO Nanoparticle for Determination of Sunset Yellow in Real Samples

Rapid, selective and sensitive detection of sunset yellow by a novel electrochemical sensor: The impact of europium oxide nanoparticles on a composite of yttrium oxide–carbon nanotubes

Development of a new nanosensor for the determination of food coloring Sunset Yellow in powder drinks using L-cysteine coated copper nanoclusters

Ratiometric Electrochemical Sensor for Sensitive Detection of Sunset Yellow Based on Three-Dimensional Polyethyleneimine Functionalized Reduced Graphene Oxide Aerogels@au Nanoparticles/sh-Β-cyclodextrin.

Simple and Highly Sensitive Electrochemical Sensor for Sunset Yellow Detection Based on Co3O4/g‐C3N4 Nanocomposite Modified Gold Electrode

A comparison of PMT-based and CCD-based sensors for electrochemiluminescence detection of sunset yellow in soft drinks

Sensitively Simultaneous Determination of Sunset Yellow and Tartrazine in Foods Based on Polypyrrole Modified Oxidized Single-Walled Carbon Nanotubes

An Enhanced Electrochemical Platform Based on Graphene Oxide and Multi-Walled Carbon Nanotubes Nanocomposite for Sensitive Determination of Sunset Yellow and Tartrazine.

Vertically Aligned Manganese-doped ZnO Nanorods Synthesized on Glassy Carbon Electrode for Detection of Colorants in Soft Drinks

Efficient pre-concentration of trace levels of the synthetic food dye in foodstuff samples through an adsorption extraction technique using a novel inorganic–organic nanocomposite

Determination of sunset yellow in beverage based on solution-gated graphene transistors with multi-walled carbon nanotube functionalized gate electrodes

Colorimetric and near-infrared spectrophotometric monitoring of bisulfite using glyoxal modified chromenylium-cyanine chemosensor: Smartphone and paper strip applications for on-site food and beverages control

A modified electrode based on 3D reduced graphene oxide and MoS2 composite for simultaneous detection of sunset yellow and tartrazine

One-Step Fabrication of Nickel-Electrochemically Reduced Graphene Oxide Nanocomposites Modified Electrodes and Application to the Detection of Sunset Yellow in Drinks

Green deep eutectic solvent assisted liquid–liquid microextraction procedure for Sunset Yellow dye in effervescent vitamin C tablets

Development of a highly sensitive ultra-small ratiometric fluorescence nanosphere probe for Sunset Yellow detection

Rapid Detection of Quinoline Yellow in Soft Drinks Using Polypyrrole/Single-Walled Carbon Nanotubes Composites Modified Glass Carbon Electrode