Abstract:Background Monte Carlo simulation code is commonly used for the dose calculation of boron neutron capture therapy. In the past, dose calculation was performed assuming a homogeneous mass density and elemental composition inside the tissue, regardless of the patient's age or sex. Studies have shown that the mass density varies with patient to patient, particularly for those that have undergone surgery or radiotherapy. A method to convert computed tomography numbers into mass density and elemental weights of tissues has been developed and applied in the dose calculation process using Monte Carlo codes. A recent study has shown the variation in the computed tomography number between different scanners for low‐ and high‐density materials. Purpose The aim of this study is to investigate the effect of the elemental composition inside each calculation voxel on the dose calculation and the application of the stoichiometric CT number calibration method for boron neutron capture therapy planning. Methods Monte Carlo simulation package Particle and Heavy Ion Transport code System was used for the dose calculation. Firstly, a homogeneous cubic phantom with the material set to ICRU soft tissue (four component), muscle, fat, and brain was modelled and the NeuCure BNCT system accelerator‐based neutron source was used. The central axis depth dose distribution was simulated and compared between the four materials. Secondly, a treatment plan of the brain and the head and neck region was simulated using a dummy patient dataset. Three models were generated; (1) a model where only the fundamental materials were considered (simple model), a model where each voxel was assigned a mass density and elemental weight using (2) the Nakao20 model, and (3) the Schneider00 model. The irradiation conditions were kept the same between the different models (irradiation time and irradiation field size) and the near maximum (D1%) and mean dose to the organs at risk were calculated and compared. Results A maximum percentage difference of approximately 5% was observed between the different materials for the homogeneous phantom. With the dummy patient plan, a large dose difference in the bone (greater than 12%) and region near the low‐density material (mucosal membrane, 7%–11%) was found between the different models. Conclusions A stoichiometric CT number calibration method using the newly developed Nakao20 model was applied to BNCT dose calculation. The results indicate the importance of calibrating the CT number to elemental composition for each individual CT scanner for the purpose of BNCT dose calculation along with the consideration of heterogeneity of the material composition inside the defined region of interest.

Improvement and benchmarking of the deterministic transport calculation code CBZ to design beam shaping assembly for BNCT

Neutron and photon calculations of beam shaping assembly for BNCT based on Monte Carlo-discrete ordinates coupled method

ACE-FRENDY-CBZ: a new neutronics analysis sequence using multi-group neutron transport calculations

Neutron flux evaluation algorithm with a combination of Monte Carlo and removal‐diffusion calculation methods for boron neutron capture therapy

Development of a new multi-modal Monte-Carlo radiotherapy planning system

Design of Beam Shaping Assemblies for Accelerator-Based BNCT With Multi-Terminals

Improvement of Dose Distribution in Phantom by Using Epithermal Neutron Source Based on the Be(P,N) Reaction Using A 30 Mev Proton Cyclotron Accelerator

Monte Carlo Approach of Effective Delayed Neutron Fraction by k-Ratio Method with External Neutron Source

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

Neutron Activation Analysis Based on AB-BNCT Treatment Room

Evaluation of calculation accuracy and computation time in a commercial treatment planning system for accelerator-based boron neutron capture therapy

Simulating the head of a TrueBeam linear particle accelerator and calculating the photoneutron spectrum on the central axis of a 10-MV photon using particle and heavy-ion transport system code

Application of stoichiometric CT number calibration method for dose calculation of tissue heterogeneous volumes in boron neutron capture therapy

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Improved Algorithms and Coupled Neutron-Photon Transport for Auto-Importance Sampling Method

Optimization Treatment of Point-Wise Nuclear Data in Monte Carlo Criticality and Burnup Calculations

Three-Dimensional Full-Core BEAVRS Using OpenMOC with Transport Equivalence

Improved prompt and delayed photon heating computational methods for fast reactors

[The Study for Standardization of Dose Evaluation Method in Cone-beam CT]

A Newly Developed and Verified Transport Capacity of Monte Carlo Photon Particles in RMC

Prompt: Probability-Conserved Cross Section Biasing Monte Carlo Particle Transport System