Abstract:In contemporary times, renewable energy is gradually supplanting traditional fossil fuels. Nevertheless, the irregular fluctuation of renewable energy has posed challenges to its efficient utilization. Boosting the flexibility of combined heat and power units and employing electrical energy storage stands as primary solutions. The study puts forth an electric-heat integrated energy system based on a combined heat and power unit, along with a multi-level compressed CO2 energy storage system, aimed at enhancing wind power penetration and load satisfaction. Through the mathematical modeling of the system components, the study delves into three typical cases spanning 120 h (deep winter, early winter, and summer conditions) as well as 24-hour data analysis. Furthermore, a comparative analysis is conducted between the proposed system and the integrated energy system featuring the traditional compressed CO2 energy storage system. The results indicate that the total hours of high wind curtailment ratio (> 8 %) in the three cases amount to 8 h, 7 h, and 0 h, while the total hours of low power satisfaction ratio (< 95 %) in the same cases are 5 h, 6 h, and 1 h. The total wind curtailment ratio in the three cases is 1.57 %, 1.09 %, and 0.58 %, with corresponding total power satisfaction ratios of 99.27 %, 99.11 %, and 99.79 %. This evidence substantiates the adaptability of the proposed system across various scenarios throughout the year, particularly excelling in cases with lower heat loads. In comparison, the integrated energy system with the traditional compressed CO2 energy storage system exhibits a 61.62 % and 19.37 % increase in total wind curtailment and power mismatch, underscoring the superior performance of the proposed system.

Proposal and Description of a Test System with Wind, Hydro and Fossil Fuel Power Plants for Static Analyses

Stability Evaluation of a Grid-Tied Hybrid Wind/pv Farm Joined with a Hybrid Energy-Storage System

A Real Test System For Power System Planning, Operation, and Reliability

Functionality identification for the testing systems with large-scale highly-concentrated wind power integration by long-distance transmission lines

An Enhanced IEEE 33 Bus Benchmark Test System for Distribution System Studies

The Reliability and Operational Test System of a Power Grid with Large-Scale Renewable Integration

U.S. Test System with High Spatial and Temporal Resolution for Renewable Integration Studies

Reliability-based Long Term Hydro/thermal Reserve Allocation of Power Systems with High Wind Power Penetration

Integration of wind and solar energies with battery energy storage systems into 36-zone Great Britain power system for frequency regulation studies

Transmission System Electromechanical Stability Analysis with High Penetration of Renewable Generation and Battery Energy Storage System Application

Transmission Expansion Planning Test System for AC/DC Hybrid Grid with High Variable Renewable Energy Penetration

A Test System for Transmission Expansion Planning Studies

Experimental Validation of a Dynamic Virtual Power Plant Concept Based on Multiple-Converter Power Hardware-In-the-Loop Test Bench

Real-Time Models of Advanced Energy Conversion Systems for Large-Scale Integration Studies

Performance Analysis of an Electric-Heat Integrated Energy System Based on a CHP Unit and a Multi-Level CCES System for Better Wind Power Penetration and Load Satisfaction

Combined Electric and Heat System Testbeds for Power Flow Analysis and Economic Dispatch

Testbeds for Integrated Transmission and Distribution Networks: Generation Methodology and Benchmarks

A Static Voltage Stability Margin Evaluation Approach for Coordinated Operation of Grid-Tied Wind Power, PV and Energy Storage Stations

Solution of Voltage Stability Assessment for Complicated Power System Incorporating Wind Power

The IEEE Reliability Test System: A Proposed 2019 Update

An integrated transmission and distribution test system for evaluation of transactive energy designs