Abstract:Manganese carbonate (MnCO3) is an attractive anode material with high capacity based on conversion reaction for lithium-ion batteries (LIBs), but its application is mainly hindered by poor cycling performance. Building nanostructures/porous structures and nanocomposites has been demonstrated as an effective strategy to buffer the volume changes and maintain the electrode integrity for long-term cycling. It is widely believed that microsized MnCO3 is not suitable for use as anode material for LIBs because of its poor conductivity and the absence of nanostructure. Herein, different from previous reports, spherical MnCO3 with the mean diameters of 6.9 μm (MnCO3-B), 4.0 μm (MnCO3-M), and 2.6 μm (MnCO3-S) were prepared via controllable precipitation and utilized as anode materials for LIBs. It is interesting that the as-prepared MnCO3 microspheres demonstrate both high capacity and excellent cycling performance comparable to their reported nanosized counterparts. MnCO3-B, MnCO3-M, and MnCO3-S deliver reversible specific capacities of 487.3, 573.9, and 656.8 mA h g(-1) after 100 cycles, respectively. All the MnCO3 microspheres show capacity retention more than 90% after the initial stage. The advantages of MnCO3 microspheres were investigated via constant-current charge/discharge, cyclic voltammetry and electrochemical impedance spectroscopy. The results indicate that there should be substantial structure transformation from microsized particle to self-stabilized nanostructured matrix for MnCO3 at the initial charge/discharge stage. The evolution of EIS during charge/discharge clearly indicates the formation and stabilization of the nanostructured matrix. The self-stabilized porous matrix maintains the electrode structure to deliver excellent cycling performance, and contributes extra capacity beyond conversion reaction.

Experimental and theoretical investigations of the effect of heteroatom-doped carbon microsphere supports on the stability and storage capacity of nano-Co3O4 conversion anodes for application in lithium-ion batteries

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Controlled Synthesis of Ultrafine β-Mo2C Nanoparticles Encapsulated in N-Doped Porous Carbon for Boosting Lithium Storage Kinetics

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Facile Synthesis of Ultrasmall CoS2Nanoparticles Within Thin N-Doped Porous Carbon Shell for High Performance Lithium-Ion Batteries

Co3O4/nitrogen-doped carbon nanoparticles for high-performance Li/Na-ion batteries

Revealing the influence of conversion-type Co3O4 dimensionality on cyclic and rate performance for lithium storage

Introducing heteroatoms, oxygen vacancies and heterostructures in Co 3 O 4 wrapped in carbon nanofibers by low-temperature vulcanization for lithium-ion storage

Engineering of Ni3S4/Co3S4 nanosheets@N, S co-doped carbon anode for lithium-ion batteries

Rapid Activation and Enhanced Cycling Stability of Co3O4 Microspheres Decorated by N-doped Amorphous Carbon Shell for Advanced LIBs

Low-Temperature Metal-Catalysed Synthesis of Metal Oxide Nanoparticles Encapsulated and Nitrogen-doped Carbon Nanotubes from Carbon Nitride as Anodic Materials of High-Performance Lithium-Ion Batteries

High-Capacity and Self-Stabilized Manganese Carbonate Microspheres As Anode Material for Lithium-Ion Batteries.

Highly Conductive Co3Se4 Embedded in N-doped 3D Interconnected Carbonaceous Networks for Enhanced Lithium and Sodium Storage

Introduction of as-prepared cobalt source-containing carbon nanotubes to Co1-S@C mesoporous nanospheres for an ultrahigh lithium storage

Engineering Hierarchical CoO Nanospheres Wrapped by Graphene via Controllable Sulfur Doping for Superior Li Ion Storage

Cobalt-promoted Fabrication of 3D Carbon with a Nanotube-Sheet Mutual Support Structure: Scalable Preparation of a High-Performance Anode Material for Li-ion Batteries

Highly conductive Co3Se4 embedded in N-doped 3D interconnected carbonaceous network for enhanced lithium and sodium storage

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Dual-carbon coupled Co5.47N composites for capacitive lithium-ion storage

Silicon and Carbon Nanocomposite Spheres with Enhanced Electrochemical Performance for Full Cell Lithium Ion Batteries

Crystalline/Non-Crystalline Carbon Co-Modified Strategy to Construct N, S Co-Doped Carbon Layer Wrapped Fe0.95S1.05/Carbon Nanotubes for Enhanced Lithium Storage Property