Abstract:Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, Ahead of Print. To overcome the difficulties of time-consuming and inefficient in the response calculations of the submerged cylindrical shell with internal substructures, this paper firstly presents a refined mode superposition method. In view of the necessity and difficulties of directly and quickly obtaining the frequencies and modes of structures submerged in fluid (named the wet modes), the wet modes are expanded by the modes in vacuum (dry modes) and solved by the energy method. The added kinetic energy of the fluid is calculated via boundary integration, and the Lagrange equations of the second kind is applied to the fluid-structure coupling equations. Then the wet modes are solved by eigenvalue calculation and the modal mass and stiffness of each order wet mode are obtained. Finally, they are used for establishing a mode superposition approach for response calculations. The accuracy of the present method is verified by ANSYS software. In this method, all the required data are obtained from the structural analysis and the traditional complicated fluid force modeling is no longer required. Thus it has the advantages of high computational efficiency and applicability. Compared to the traditional semi-analytic model, this modeling methodology has broad application potential for vibration problems of complex underwater structures since the structural dry modes can be solved efficiently by commercial software. It also has practical value as a theoretical reference for developing mode-superposition-based calculations for fluid-structure problems using commercial software.

One-way FSI Simulation of the Added Damping of T(0,1) Modes of Two Partially Overlapped Identical Plates in Still Water

One-Way Fluid-Structure Interaction Simulation of the Added Damping of T(0,1) Modes of Two Partially Overlapped Identical Plates in Still Water

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Experimental and numerical investigation on the dynamic behavior of two partially overlapped identical plates submerged in water

Numerical Study on the Wave Dissipating Performance of a Submerged Heaving Plate Breakwater

Numerical Analysis of Added Mass and Damping of Elastic Hydrofoils

A Numerical Method to Simulate the Coupled Oscillations of Flexible Structures in Flowing Fluids

A loosely-coupled scheme for the flow-induced flapping problem of two-dimensional flexible plate with strong added-mass effect

Numerical Investigation of an Internal Solitary Wave Interaction with Tandem Horizontal Cylinders

Coupled Finite Particle Method for Simulations of Wave and Structure Interaction

Simulations of passive oscillation of a flexible plate in the wake of a cylinder by immersed boundary method

Virtual testing for modal and damping ratio identification of submerged structures using the PolyMAX algorithm with two-way fluid–structure Interactions

A refined mode superposition method for dynamical responses of an underwater cylindrical shell with substructures

Numerical Simulation of Added Mass Effects on a Hydrofoil in Cavitating Flow Using Acoustic Fluid-Structure Interaction

The application of an improved wet mode method in fluid-structure interaction

Numerical simulation of added mass effects on a hydrofoil in cavitating flow using acoustic FSI

The Simulation Research of Damping Characteristics for the Underwater Vehicle Moving under or Exceeding Water

Study of the influence of added water and contained water on structural vibrations and acoustic radiation using different dynamic modeling methods

Numerical Simulation of Extremely Nonlinear Interaction Between Solitary Wave and Flat Plate

Numerical simulation of damping effect of ballast water system on motion response of immersed tunnel element

On the treatment of hydroelastic slamming by coupling boundary element method and modal superposition method