Abstract:Coking is an inevitable phenomenon in regenerative cooling system of hypersonic vehicles using endothermic hydrocarbon fuels (EHF) as coolant, which affects cooling performance and even clogs cooling channels. This work proposes an upgraded dynamic mesh method, normal motion with O-type-based hybrid mesh construction, which successfully breaks 2D dimension barrier of normal elementary numerical method and realizes 3D simulation. The framework is tested in two circular tubes with different diameters (Tube A and Tube B) and one elliptical tube (Tube C) under supercritical pressure of 4 MPa. Under heavy deposition (the cross-sectional area reduces to 70 % of its initial), the circumferential and axial distribution of the deposit are simulated and its effect on flow, heat transfer, pyrolysis, and cooling capacity is discussed. Results indicate that the deposition elevates the maximum temperature and pressure drop, leading increased thermal risk and flow resistance. The acceleration effect from reduced cross-sectional area outweighs the thermal effect from deteriorated heat transfer, manifested as increased outlet temperature but decreased n-decane conversion and cooling capacity. The buoyancy effect is significant in Tube B, resulting in non-uniform circumferential distribution of coke deposit. It is proved that the dimensionless Gr q / Gr th with criterion of 1.0 can well explain the buoyancy effect quantitatively. The upgraded dynamic mesh method well achieves the coking effect evaluation in real 3D regenerative cooling, which also shows great potential to be applied to other field involving deposition phenomenon such as petroleum industry.

Pyrolysis coking performance of supercritical n-decane in additively manufacturing channel

Supercritical-Pressure Heat Transfer, Pyrolytic Reactions, and Surface Coking of N-Decane in Helical Tubes

Oxidative and pyrolytic coking characteristics of supercritical-pressure n-decane and its influence mechanism on heat transfer

A study on acceleration and inhibition of coking on metal surfaces by micropyrolysis of ethylene feedstocks

Three-dimensional CFD model for the coking of supercritical n-decane in circular and elliptical tubes

Simplification of Pyrolytic Reaction Mechanism and Turbulent Heat Transfer of N-Decane at Supercritical Pressures

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Effect of molecular structure on pyrolysis coking performances of hydrocarbons at different temperatures

Pyrolysis and Coking of n-Heptane under Supercritical Conditions

Effects of Molecular Structures on the Pyrolysis and Anti-Coking Performance of Alkanes for Thermal Management

Numerical Model Development and Validation for Hydrocarbon Fuel Supercritical Heat Transfer with Endothermic Pyrolysis

In-situ study of the heating rate effects on covalent bonds conversion and pore/carbon microcrystal evolutions of coal molecule during coking

A transient coking model of hydrocarbon pyrolysis in hot pipe based on RPM analogy

Study on the interaction and coking characteristics of low-sulfur meager coal and medium-high sulfur fat coal during co-carbonization process

The Influence of Coking on Heat Transfer in Turbulent Reacting Flow of Supercritical Hydrocarbon Fuels

Experimental Investigation on the Flow and Heat Transfer Characteristics of Aviation Kerosene RP-3 During Thermal Pyrolysis Coking

Hydraulic and Thermal Effects of Coke Deposition During Pyrolysis of Hydrocarbon Fuel in a Mini-Channel

Dynamic Behaviors of Coking Process During Pyrolysis of China Aviation Kerosene RP-3

Effects of endothermic hydrocarbon fuel composition on the pyrolysis and anti-coking performance under supercritical conditions

Modeling and Analysis of Heat and Mass Transfers of Supercritical Hydrocarbon Fuel with Pyrolysis in Mini-Channel