Experimental and 3D numerical analysis of embankment on soft soil improved with cement bottom ash columns

Arshad Ullah,Azman Kassim,Ahmad Safuan A. Rashid,Yu Huang,Muhammad Junaid,Mohammad Jawed Roshan
DOI: https://doi.org/10.1007/s11440-024-02412-x
2024-10-06
Acta Geotechnica
Abstract:Bottom ash (BA) is a byproduct produced during coal combustion and can be utilized in mortar as a column material to conserve natural resources and promote sustainable ground stabilization. In this paper, the load-carrying capacity performance of the embankment resting on cement bottom ash columns (CBAC) improved ground was examined. Physical model tests and numerical analysis were conducted for the soft soil improved with three columns spacing to diameter ratios ( s / d ) of 1.8, 2.4, and 3.6 and two columns length to diameter ratios ( L / d ) of 6 and 8. Three earth pressure transducers, load cell, and pore water pressure transducer were employed to measure the applied vertical stress on the bottom and top of the column and surrounding clay, embankment surface, and excess pore water pressure ( u′ ), respectively. The findings obtained from both physical and numerical models demonstrated that ultimate bearing capacity ( q ult ) increased by reducing the s / d and increasing the L / d values. The q ult increased by almost 1.15, 1.39, 1.70 times and 1.18, 1.44, and 1.77 times as compared to the unimproved soil for the s / d of 3.6, 2.4, and 1.8 with L / d values of 6 and 8, respectively. The maximum improvement was achieved for the model with CBAC having L / d of 8 and s / d of 1.8. In addition, a mathematical equation with R 2 of 0.999 was established for the determination of the predicted q ult . The results of this paper can lead to the usage of BA as a green material in the column for ground stabilization.
engineering, geological
What problem does this paper attempt to address?