Abstract:The current work presents and discusses the design and performance qualities of braided electronic yarns for woven textiles to produce red light-intensity effects. The design process involves a simple encapsulation process with adhesive tape and a heat-shrinkable tube to secure stainless-steel conductive threads (SS-CTs) to the solder pads of light-emitting diodes. These are arranged in a series against two SS-CTs to provide single positive and negative terminals at both ends. Findings from the infrared images show that the heat distribution and dissipation of the stainless-steel conductive threads are insignificant in affecting the wear comfort of the electronic textiles on the human body. The washing test shows the robust nature of the braided electronic yarns even after 20 cycles of being subjected to high agitation and mechanical stress. A proof of concept illustrates the effectiveness of the study results, which calls on further research work to enhance the durability and flexibility of the braided electronic yarns and electronic textiles to ensure a higher level of wear comfort. These braided electronic yarns would find end applications for nighttime visibility of pedestrians, a situation that would improve the recognition of drivers for reduced collision. Electronic textiles otherwise known as e-textiles have been the subject of scholarly attention in recent years due to their performance properties and wide areas of application for entertainment, monitoring, and safety purposes. The use of appropriate electronic yarns (e-yarns) plays a key role in connectivity and provides the necessary feedback when applied to a textile material. E-yarns are now replacing a few modern electronic textiles (e-textiles) that use rigid copper wires commonly applied in electronic circuits for e-textiles and improve the wear comfort of the garment. The integration of light-emitting diodes (LEDs) into conductive threads to form electronic yarns for textile material can be applied not only for entertainment purposes but also as a safety feature for pedestrians. The use of appropriate components is necessary to ensure and maintain the textile quality and properties for effective wearability. Herein, an e-yarn fabricated with stainless-steel conductive threads and LEDs for e-textiles is presented. As part of ongoing research work to develop smart interactive clothing to increase the nighttime visibility of pedestrians, this work discusses the design and performance qualities of braided e-yarns for woven textiles. The success of these low-cost, flexible, and strong (high wash durability) braided e-yarns facilitates their integration into woven fabrics for smart clothing to enhance the visibility and therefore safety of pedestrians.

The effect of embroidery parameters on the signal transmission performance of microstrip line

Performance evaluation of conductive tracks in fabricating e-textiles by lock-stitch embroidery

Embroidered Transmission Lines with Conductive Yarns: Challenges, Modeling, Fabrication, and Experimental Performance Assessment

Research On Silk Screen Printing Conductive Ink Rfid And Measurement

Comprehensive performance evaluation based on electromagnetic shielding properties of the weft-knitted fabrics made by stainless steel/cotton blended yarn

Characterization and Modeling of Embroidered NFC Coil Antennas for Wearable Applications

A Silver Yarn-Incorporated Song Brocade Fabric with Enhanced Electromagnetic Shielding

Effect of smart textile metamaterials on electromagnetic performance for wireless body area network systems

Effect of needle loops on shielding effectiveness of electromagnetic shielding knitted fabrics

Tailoring Electromagnetic Interference Shielding Performance of Conductive Nanocomposite Coating Using Textile Substrates

Influence of process parameters on the characteristics of electrohydrodynamic-printed UV-curing conductive lines on the fabric

A new study on the influencing factors and mechanism of shielding effectiveness of woven fabrics containing stainless steel fibers

High-strength conductive yarns and fabrics: mechanical properties, electromagnetic interference shielding effectiveness, and manufacturing techniques

Parasitic capacitance modeling and measurements of conductive yarns for e-textile devices

The Wicking Performance of Interlaced Silk Yarn Focusing on Yarn Parameters

Comparison of the Parameters of Textile Antennas Manufactured Using Three Techniques: Magnetron Sputtering, Ink-Jet Printing and Embroidery

Functional performance of low-cost electronic yarn for E-textiles

Interconnecting embroidered hybrid conductive yarns by ultrasonic plastic welding for e-textiles

Determination of electromagnetic shielding and antibacterial properties of multifunctional warp-knitted fabrics

Study the Electrical Properties of Surface Mount Device Integrated Silver Coated Vectran Yarn

Effects of microstrip line fabrication and design on high-speed signal integrity transmission of PCB manufacturing process