Effects of solution chemistry on arsenic(V) removal by low-cost adsorbents.

Yuru Wang,Daniel C W Tsang

DOI: https://doi.org/10.1016/S1001-0742(12)60296-4

2013-11-01

Journal of Environmental Science

Abstract:

What problem does this paper attempt to address?

Two‐Dimensional Fluorinated Covalent Organic Frameworks with Tunable Hydrophobicity for Ultrafast Oil–Water Separation

Yuhao Liu,Wei Li,Chen Yuan,Lei Jia,Yan Liu,Aisheng Huang,Yong Cui

DOI: https://doi.org/10.1002/anie.202113348

2021-11-25

Angewandte Chemie International Edition

Abstract:Covalent organic frameworks (COFs) hold great potentials for addressing the challenge of highly efficient oil-water separation, but they are restricted by the poor wettability and processability as crystalline membranes. Here we report the design and synthesis of two-dimensional (2D) robust COFs with controllable hydrophobicity and processability, allowing the COF layers to be directly grown on the support surfaces. Three 2D COFs with AA or ABC stacking are prepared by condensation of triamines with fluorine and/or isopropyl groups and perfluorodialdehyde. They all show excellent tolerance to water, acid, and base, with water contact angles (CA) of 111.5-145.8°. The two COFs with isopropyl and fluorine mixtures can grow as a coating on a stainless-steel net (SSN) substrate, whereas the one with only fluorine substituents cannot. The superhydrophobic COF@SSN coating with water CA of up to 150.1° displays high water-resistance and self-cleaning properties, enabling high oil-water separation performances with an efficiency of over 99.5 % and a permeation flux of 2.84×105 L m-2 h-1 , which are among the highest values reported for state-of-the-art membranes.

chemistry, multidisciplinary
Smart superwetting COF membrane for controllable oil/water separation

Qian Sun,Jingcheng Du,Linghao Wang,Ayan Yao,Ziye Song,Linghao Liu,Dong Cao,Ji Ma,Weiwang Lim,Wen He,Shabi Ul Hassan,Cailong Zhou,Jiangtao Liu

DOI: https://doi.org/10.1016/j.seppur.2023.123825

IF: 8.6

2023-04-23

Separation and Purification Technology

Abstract:Covalent organic frameworks (COFs), as a kind of porous crystalline materials, have exhibited tremendous application prospects in various fields over the past few decades. Nonetheless, the employment of COFs in oil/water separation field was rarely reported. Herein, we prepared a robust and loose COF membrane using the collected COF nanofibers by filtration assembly method. The obtained COF membrane possesses unique superwettability, which endows the COF membrane with switchable transport performance. Consequently, the COF membrane can achieve the controllable and switchable separation of light oil/water mixture, heavy oil/water mixture, water-in-oil emulsion, and oil-in-water emulsion with high separation efficiency and permeance. This intelligent COF membrane with the underwater superoleophobic and underoil superhydrophobic properties will greatly enrich the application field of COFs and open up new prospects for designing more novel materials in controllable free oil/water mixture separation and on-demand oil/water emulsion separation.

engineering, chemical
Integrating Superwettability Within Covalent Organic Frameworks for Functional Coating

Qi Sun,Briana Aguila,Jason A. Perman,Taylor Butts,Feng-Shou Xiao,Shengqian Ma

DOI: https://doi.org/10.1016/j.chempr.2018.05.020

IF: 23.5

2018-01-01

Chem

Abstract:Despite the availability of a variety of skeletons for covalent organic frameworks (COFs), control of pore-surface wettability remains undeveloped, which could immensely expand their overall versatility. Herein, we contribute an effective strategy for imparting superwettability on COFs by chemically coating the pore surface with perfluoroalkyl groups to confer them with superhydrophobicity. Taking advantage of controllable modification, the resultant COFs retain the porosity and crystallinity of the pristine COFs. Benefiting from the bulk superhydrophobicity of the COF crystals and the feasibility of COF synthesis, they can be used as a coat or in situ integrated within various substrates; once applied, this renders them superhydrophobic. Given the modular nature, this protocol is compatible with the development of various specific wettabilities in COFs, which thereby constitutes a step for expanding the scope of COF applications and provides many opportunities for the processing of advanced materials and devices.
A Superhydrophobic Trifluoromethyl-Containing Covalent Organic Framework Membrane for Efficient Oil/Water Separation

Jia-Qi Chu,Ya Lu,Shi-Xian Gan,Qiao-Yan Qi,Chao Jia,Jin Yao,Xin Zhao

DOI: https://doi.org/10.1002/marc.202200641

Abstract:Oily water caused in the process of industry leads to not only the waste of resources, but also environmental pollution. Membrane separation, as a facile and efficient separation technology, has attracted widespread attention in the field of oil/water separation. The development of membrane materials with high separation performance is one of the key elements to improve separation efficiency. In this work, a superhydrophobic membrane composited with a trifluoromethyl-containing covalent organic framework (COF) is prepared, which exhibits excellent performance on separations of oil/water mixtures and water-in-oil emulsions. For different composition of oil/water mixtures, the highest flux of oil is up to 32 000 L m-2 h-1 and oil/water separation efficiency is above 99%. Moreover, the high oil/water separation efficiency remains unchanged after successive cycles. This work provides a feasible scheme for the design of high-efficiency oil/water separation membranes.
An eco-friendly approach by nonfluorous self-cleaning metal-organic framework composite and membrane for oil-water separation

Abhijeet Rana,Subhrajyoti Ghosh,Shyam Biswas

DOI: https://doi.org/10.1039/d2qi02062a

IF: 7.779

2022-11-16

Inorganic Chemistry Frontiers

Abstract:Here, we report a first-ever superhydrophobic metal-organic framework (MOF) material that is prepared from a presynthesized long-chain hydrocarbon-based linker. The nonfluorous MOF was synthesized using palmitamdoterephthalic acid (H2BDC-NH-R, R: -NH-CO-(CH2)14-CH3) linker and zirconium salt. The material was systematically characterized by PXRD, FT-IR, EDX and FE-SEM experiments in order to confirm its crystallinity, functionality, elemental purity and particle nature. Further, the material's superhydrophobicity was proved by water contact angle (WCA) measurement. The MOF material was further utilized to design a superhydrophobic melamine sponge composite and silk membrane. Both the composite and membrane were applied for the selective separation of oil from the oil-water mixture. The separation efficiency in both the absorption and filtration-based method was higher than 99%. The absorption capacity of the composite ranged between 43.8 and 97.2 g·g-1. The flux of oil-water separation was 58263-47416 Lm-2h-1, which is higher than most of the reported materials. Both the membrane and composite displayed remarkable self-cleaning property. The long-chain hydrocarbon-based linker is the reason behind the superhydrophobic nature of MOF. The tiny nanostructure of MOF on the surface of composite and membrane causes the arrival of the Cassie-Baxter state when they come in contact with water. The nonpolar-nonpolar interaction between MOF and different oil is the reason behind the selective oil-water separation. Since water is polar in nature, the superhydrophobic composite and membrane inhibit the permeation of water through them. The mechanism of nonpolar-nonpolar interaction was supported by the ESP diagram of the linker, water and all the organic molecules present in crude oil.

chemistry, inorganic & nuclear
Super-hydrophilic membranes fabricated by synergistic integration of covalent organic framework nanoflowers and hydrophilic layers for efficient oil-water separation

Baoliang Dai,Yidan Ding,Cheng Chen,Liguo Shen,Die Ling Zhao,Yang Jiao,Hongjun Lin,Yanchao Xu

DOI: https://doi.org/10.1016/j.desal.2024.118095

IF: 11.211

2024-09-11

Desalination

Abstract:Despite numerous advancements, the development of super-hydrophilic membranes for efficient oil-water separation remains a significant challenge due to issues such as membrane fouling and the trade-off between selectivity and permeability. This study addresses these issues by innovatively integrating covalent organic framework nanoflowers with hydrophilic layers of polydopamine and polyethylene glycol. The research introduces a novel membrane, DP/COF 3 /PVDF, fabricated through a layer-by-layer self-assembly process and subsequent co-deposition of dopamine and PEG, which combines the nanostructured COF with a hydrophilic coating. Experimental results reveal that the optimized membrane exhibits remarkable hydrophilicity, with a water contact angle of 17.0° and an underwater oil contact angle of 176.9°. Notably, the membrane achieves an impressive pure water flux of 3919.9 L m −2 h −1 bar −1 and a rejection rate exceeding 98.0 % across various oil-water emulsions, significantly outperforming traditional membranes. The membrane exhibits superior antifouling capabilities and stability over ten cycles of use, with negligible flux decline and consistent rejection rates, showcasing robust durability and reusability. This study's findings highlight the potential for developing next-generation super-hydrophilic membranes with improved oil-water separation efficiency and durability.

engineering, chemical,water resources
Fluorine-Functionalized Covalent Organic Framework Superhydrophobic Modified Melamine Sponge for Efficient oil–water Separation

Yaxue Zhang,Jihong Fu,Wenxia Xue,Guoqi Liu,Ronglan Wu

DOI: https://doi.org/10.1021/acs.langmuir.3c04002

IF: 3.9

2024-03-12

Langmuir

Abstract:Hydrophobic sponges have attracted significant interest in oil spills and water-oil separation as potential absorption materials due to their desirable absorptivity, selectivity, and elasticity. In this paper, a hydrophilic melamine sponge (MS) is transferred into a superhydrophobic sponge via polydimethylsiloxane (PDMS) modification followed by in situ growth of fluorine-functionalized covalent organic framework (denoted as TFA-COF) nanoparticles. Therefore, the PDMS@TFA-COF@MS sponge was successfully prepared for efficient oil-water separation. The resultant PDMS@TFA-COF@MS exhibits superhydrophobic properties with a water contact angle of 156.7°. The superhydrophobic sponge has selectivity adsorption for different organic solvents and oils from water as well as oil-water separation efficiency (96% after 30 cycles) and oil absorption capacity (12 646% after 30 cycles). Meanwhile, the PDMS@TFA-COF@MS sponge exhibits strong thermal stability and flame retardancy in addition to having exceptional resistance to chemical corrosion in acidic, alkaline, and salt solutions. Moreover, the surfactant-stabilized oil-in-water emulsion could be efficiently separated by the sponge. Therefore, the prepared superhydrophobic PDMS@TFA-COF@MS sponge demonstrates possible uses for long-life oil-water separation applications.

chemistry, multidisciplinary, physical,materials science
The normally expressed κ immunoglobulin light chain gene repertoire and somatic mutations studied by single‐sided specific polymerase chain reaction (PCR); frequent occurrence of features often assigned to autoimmunity

L. Juul,L. Hougs,V. Andersen,A. Svejgaard,T. Barington

DOI: https://doi.org/10.1046/j.1365-2249.1997.4341332.x

1997-07-01

Abstract:The expressed human κ light chain gene repertoire utilized by healthy individuals was studied by two different single‐sided specific PCR techniques to avoid bias for certain V genes. A total of 103 rearranged κ sequences from peripheral blood mononuclear cells from healthy individuals were cloned from cDNA and assigned to the Vκ and Jκ germ‐line genes with the closest overall homology. The use of cDNA rather than genomic DNA focused the analysis on activated B cells rich in mRNA. Accordingly, the sequences represented the applied repertoire and almost all were somatically mutated. V genes from the Jκ‐proximal duplication unit of the κ locus were almost exclusively used. A total of 65% of the sequences could be assigned to four or five genes: A27 (humkv325), L6 (Vg), L2 (humkv328), and A3 and/or A19. N additions and P nucleotides were quite common and found in 32% and 21% of the sequences, respectively. Extended CDR3s more than nine residues in length were found in 18% of the sequences, and in 71% of cases this was due to insertion of an extra proline residue. This proline was usually explained from the germ‐line sequences involved. These results are in good agreement with those of previous repertoire studies using potentially V‐gene‐biased techniques. Thus, it is clear that restricted V‐gene usage, common N and P additions, and extended CDR3 regions are normal features and not, as has been claimed, characteristics of pathological autoantibodies.
Modelling of radio wave propagation using Finite Element Analysis

K. Arshad

2007-07-01

Abstract:Fourth generation (4G) wireless communication systems are intended to support high data rates which requires careful and accurate modelling of the radio environment. In this thesis, for the first time finite clement based accurate and computationally efficient models of wave propagation in different outdoor and indoor environments has been developed. Three different environments were considered: the troposphere, vegetation and tunnels and wave propagation in these environments were modelled using finite element analysis. Use of finite elements in wave propagation modelling is a novel idea although many propagation models and approaches were used in past. Coverage diagrams, path loss contours and power levels were calculated using developed models in the troposphere, vegetation and tunnels. Results obtained were compared with commercially available software Advanced Refractive Effects Prediction Software (AREPS) to validate the accuracy of the developed approach and it is shown that results were accurate with an accuracy of 3dB. The developed models were very flexible in handling complex geometries and similar analysis can be easily extended to other environments. A fully vectored finite element base propagation model was developed for straight and curved tunnels. An optimum range of values of different electrical parameters for tunnels of different shapes has been derived. The thesis delivered a novel approach to modelling radio channels that provided a fast and accurate solution of radio wave propagation in realistic environments. The results of this thesis will have a great impact in modelling and characterisation of future wireless communication systems.
Room-temperature synthesis of fluorinated covalent organic framework decorated superhydrophobic sponges for highly efficient crude oil spill cleanup

Jinghan Dong,Wenjun Zheng,Yixin Yang,Shaofeng Dong,Songtao Li,Yanhui Zhong,Yu He,Zongwei Cai,Zian Lin

DOI: https://doi.org/10.1016/j.seppur.2024.127314

IF: 8.6

2024-04-03

Separation and Purification Technology

Abstract:Frequent oil spills cause substantial economic losses and pose a significant threat to human life. Urgent measures must be taken to develop a highly effective approach to mitigating oil spills and minimizing their potential consequences. Herein, we synthesized MS@COFs-F, fluorinated covalent organic framework-decorated superhydrophobic sponges, to clean up crude oil spills efficiently. The synthesis method involved a simple and effective room-temperature approach, utilizing 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) as the amine monomer and binding it with three aldehyde monomers of varying fluoride content. The MS@COFs-F with the highest fluorine content, known as MS@COFs-F4, exhibited low surface energy, superhydrophobicity (water contact angle of 155.7°), a large specific surface area of 180 m 2 /g, and exceptional chemical, mechanical, and thermal stability. MS@COFs-F4 demonstrated remarkable effectiveness in adsorbing crude oils and organic solvents of diverse viscosities, exhibiting an adsorption capacity between 68.5 and 125.9 g/g, achieving an oil–water separation efficiency exceeding 97.0 %. Additionally, MS@COFs-F4 showcased self-cleaning and flame-retardant properties, further enhancing its suitability for real-world applications. MS@COFs-F4 holds the potential to offer a novel, safe, and effective approach in addressing oil spill incidents.

engineering, chemical
Synergistic effects of COF and GO on high flux oil/water separation performance of superhydrophobic composites

Han Wang,Mengke Wang,Yanling Wang,Jing Wang,Xuehu Men,Zhaozhu Zhang,Vikramjeet Singh

DOI: https://doi.org/10.1016/j.seppur.2021.119268

IF: 8.6

2021-12-01

Separation and Purification Technology

Abstract:Covalent organic frameworks (COFs) have been emerged as potential coating material because of their rigid porous structure and excellent chemical stability, however, the challenges of complicated preparation process and poor processability are still remained. As a widely used composite matrix, graphene oxide usually suffers from swells and poor acid/base resistance caused by the weakening of π-π interaction between graphene sheets with large interlayer spacing in an aqueous environment. Currently, it is a trend to combine COFs and graphene oxide to utilize their synergistic effect in materials. In this study, a simple one-step method is developed to prepare hybrid materials based on COFs and GO without using any special device generally required for COFs fabrication. Significantly, synergistic effects of COFs and GO which can improve the acid /alkali resistance of GO in water as well as overcome the COFs' tendency to agglomeration further make the hybrid materials stable in separation process. The hybrid materials formed by COFs polymerization and parallel covalent linking to GO were translated into recyclable superhydrophobic composite coating by spraying onto filter paper. The fabricated coatings presented ultra-high oil/water permeation flux of 26,000 L m-2h−1 bar−1 with > 98% separation efficiency. Moreover, the coating exhibited exceptional chemical stability in acid and basic environment with excellent cycling stability. The simple methodology presented here will be expected to open up a new route for the fabrication of COFs based hybrid materials for wide range of applications.

engineering, chemical
De Novo Fabrication of Large-Area and Self-Standing Covalent Organic Framework Films for Efficient Separation

Shizhao Wang,Liting Yang,Kai Xu,Hongzheng Chen,Ning Huang

DOI: https://doi.org/10.1021/acsami.1c14420

2021-09-14

Abstract:Covalent organic frameworks (COFs) have aroused extensive attention from various fields owing to their numerous advantages, including permanent porosity, high crystallinity, strong robustness, and well-ordered channels. However, the poor processability of the crystallite powder has greatly impeded their further utilization in many advanced devices and frontier areas. In this work, we fabricate a series of COF films using an interfacial polymerization strategy at a liquid–liquid interface under ambient conditions. The as-synthesized freestanding films are continuous, flexible, and defect-free and have large areas of up to 4 × 6 cm2. In addition, the pore sizes of these COF films can be well controlled based on the principle of reticular chemistry. These films exhibit high chemical stability even in acidic and basic aqueous solutions. More significantly, the highly robust COF films can serve as a nanofiltration membrane for efficient separation of pollutant molecules with different dimensions. These films show high selectivity for the separation of mixed molecule feed and excellent recyclability without a significant loss in the rejection rate.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14420.FT-IR spectra for all of the COF films; AA stacking and staggered AB stacking modes for all of the COF films; nitrogen sorption isotherms, TGA analysis results, and XPS spectra of all of the COF films; PXRD, nitrogen sorption isotherms, and residual percentages of all of the COF films after treatment in different solutions overnight; FE-SEM images of all of the COF films; UV–vis spectra change of five dye molecules after filtration by COF films; FT-IR and PXRD spectra of the TAPA-TFP-COF film over 12 cycles; mechanical and permeance properties for all of the COF films; and the influence of reaction time and monomer concentration on the thickness of COF films (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Enabling Solution Processable COFs through Suppression of Precipitation during Solvothermal Synthesis.

Abdullah Alazmi,Morgan Barnes,M. D. Meyer,Safiya Khalil,Mohammadreza Samani,Amanda B. Marciel,R. Verduzco,Po-Chun Huang

DOI: https://doi.org/10.1021/acsnano.2c08580

IF: 17.1

2022-11-22

ACS Nano

Abstract:Covalent organic frameworks (COFs) are crystalline, nanoporous materials of interest for various applications, but current COF synthetic routes lead to insoluble aggregates which precludes processing for practical implementation. Here, we report a COF synthesis method that produces a stable, homogeneous suspension of crystalline COF nanoparticles that enables the preparation of COF monoliths, membranes, and films using conventional solution-processing techniques. Our approach involves the use of a polar solvent, diacid catalyst, and slow reagent mixing procedure at elevated temperatures which altogether enable access to crystalline COF nanoparticle suspension that does not aggregate or precipitate when kept at elevated temperatures. On cooling, the suspension undergoes a thermoreversible gelation transition to produce crystalline and highly porous COF materials. We further show that the modified synthesis approach is compatible with various COF chemistries, including both large- and small-pore imine COFs, hydrazone-linked COFs, and COFs with rhombic and hexagonal topologies, and in each case, we demonstrate that the final product has excellent crystallinity and porosity. The final materials contain both micro- and macropores, and the total porosity can be tuned through variation of sample annealing. Dynamic light scattering measurements reveal the presence of COF nanoparticles that grow with time at room temperature, transitioning from a homogeneous suspension to a gel. Finally, we prepare imine COF membranes and measure their rejection of polyethylene glycol (PEG) polymers and oligomers, and these measurements exhibit size-dependent rejection and adsorption of PEG solutes. This work demonstrates a versatile processing strategy to create crystalline and porous COF materials using solution-processing techniques and will greatly advance the development of COFs for various applications.

Medicine,Materials Science,Chemistry
Molecular and structural design of polyacrylonitrile-based membrane for oil-water separation

Chong-Jiang Lv,Bin Hao,Akram Yasin,Xiu Yue,Peng-Cheng Ma

DOI: https://doi.org/10.1016/j.polymer.2022.124969

IF: 4.6

2022-06-22

Polymer

Abstract:Herein, a durable superhydrophobic/superoleophilic membrane with micro-/nano-hierarchical structure was achieved through molecular and structural design of fluorinated polyacrylonitrile-based membrane. In which, the introduction of perfluorooctanol acrylate into copolymer chain and usage of electrospinning/electrospraying technology followed by heat post-treatment provided low surface energy and durable hierarchical structure, respectively. The resultant membrane demonstrated superhydrophobicity and superoleophilicity with water contact angle of 160° and oil contact angle of 0° in air, which endowed the membrane with excellent separation ability for oil/water mixture with separation efficiency above 99% and ultrahigh flux beyond 8000 L/m2/h. Furthermore, the obtained membrane maintained its superhydrophobicity after exposure to broad pH, organic solvents, high temperature and ultrasonic treatment, ascribed to the chemical reaction of cyano groups on the surface of fibers and particles during the heat post-treatment. This work provides a promising strategy to fabricate superwetting membrane to remove trace amount of water in oil.

polymer science
Metal-Organic Framework (MOF) Derived Recyclable, Superhydrophobic Composite of Cotton Fabrics for the Facile Removal of Oil Spills.

Chiranjib Gogoi,Shyam Biswas,Rana Dalapati,A. Shome,S. Nandi

DOI: https://doi.org/10.1021/acsami.0c21337

2021-02-12

Abstract:Marine oil spill cleanup is one of the major challenges in recent years due to its detrimental effect on our ecosystem. Hence, the development of new superhydrophobic oil absorbent materials is in high demand. The third-generation porous materials, namely metal-organic frameworks (MOFs), have drawn great attention due to their fascinating properties. In this work, a superhydrophobic MOF with UiO-66 (SH-UiO-66) topology was synthesized strategically with a new fluorinated dicarboxylate linker to absorb oil selectively from water. The fully characterized superhydrophobic MOF showed extreme water repellency with an advancing water contact angle (WCA) of 160° with a contact angle hysteresis (CAH) of 8°. The newly synthesized porous MOF (SBET = 873 m2 g-1) material with high WCA found its promising application in oil/water separation. The superhydrophobic SH-UiO-66 MOF was further used for the in-situ coating on naturally abundant cotton fiber to make a superhydrophobic MOF@cotton composite material. The MOF-coated cotton fiber composite (SH-UiO-66@CFs) showed water repellency with a WCA of 163° and a low CAH of 4°. The flexible superhydrophobic SH-UiO-66@CFs showed an oil absorption capacity more than 2500 wt % for both heavy and light oils at room temperature. The superoleophilicity of SH-UiO-66@CFs was further exploited to separate light floating oil as well as sedimentary heavy oil from water. SH-UiO-66@CFs material can also separate oil from the oil/water mixture by gravity-directed active filtration. Hence, the newly developed MOF-based composite material has high potential as an oil absorbent material for marine oil spill cleanup.

Environmental Science,Chemistry,Medicine,Materials Science
Framework reinforced orderly-woven superhydrophobic metal–carbon composites for efficient emulsion separation in harsh environments

Weiping Chen,Yu Yang,Zhiying Ren,Hongling Qin,Xueyong Chen

DOI: https://doi.org/10.1016/j.seppur.2023.125317

IF: 8.6

2023-10-14

Separation and Purification Technology

Abstract:The primary barrier to the widespread use of super-wetting materials is the surface's limited resistance to physical damage, which leads to poor mechanical qualities. In this study, framework-reinforced orderly-woven superhydrophobic metal spiral coil-carbon fibers composites (SMSC-CFsC) with a durable uniform micro-structure were prepared by nested carbon fibers into metal spiral coils cleverly and woven them into a three-dimensional porous material innovatively. The separation purity of the prepared metal–carbon composites on several commonly used industrial lubricating oil emulsions was better than 99.90 % and the flux was greater than 1000 L/m 2 h. More significantly, computational fluid dynamics was used to establish a simulation model for emulsion separation that revealed the real-time dynamic motion trajectory and volume changes of water droplets. Additionally, even after high-temperature, compression, wear, and corrosion experiments, it still showed dependable separation purity and stable flux. As a result, it has been demonstrated that the proposed metal–carbon composite has a long oil–water separation service life in harsh environments and has great potential for developing efficient and durable emulsion separation materials.

engineering, chemical
Urchin-like fluorinated covalent organic frameworks decorated fabric for effective self-cleaning and versatile oil/water separation

Yixin Yang,Jinghan Dong,Ran Wang,Zian Lin,Zongwei Cai

DOI: https://doi.org/10.1016/j.jhazmat.2023.132149

2023-10-05

Abstract:Oil contamination and industrial organic pollutants emission have been a serious problem affecting the ecological and residential environment. Membrane-based separation shows great application prospect due to its low-cost, environmental-friendly and easy operation. Therefore, the development of efficient oil-water separation membranes is highly desirable. Herein, a fabric filter with superwettability was prepared by coating urchin-like fluorinated covalent organic frameworks (COFs) on fabric, which was well utilized in filtering immiscible oil-water mixture and surfactant-stabilized water-in-oil emulsion driven only by gravity for the first time. The as-prepared COF fabric filter (defined as fabric@u-FCOF) possessed many outstanding properties, including superhydrophobicity with the water contact angle of approximately 151.6°, satisfactory resistance for alkaline, acidic and saline environments, as well as superior mechanical durability under harsh conditions. Because of the super-micropore of fabric@u-FCOF and the nanopore in the COF coating, the obtained fabric@u-FCOF exhibited excellent performances in terms of separation efficiency and permeability, in which the oil flux was up to 16964 L·m-1·h-2 and separation efficiency for the mixed o-dichlorobenzene/water was higher than 99.4%. In addition, the fabric@u-FCOF also showed excellent self-cleaning performance due to the micro/nano hierarchical structure of its surface. These excellent properties make it an ideal candidate for applications of oil/water separation and water purification.
Surfactants Mediated Synthesis of Highly Crystalline Thin Films of Imine‐Linked Covalent Organic Frameworks on Water Surface

Zhaowei Ou,Zihao Liang,Xin Dong,Fanglin Tan,Li Gong,Pei Zhao,Honglei Wang,Wei Liu,Zhikun Zheng

DOI: https://doi.org/10.1002/cjoc.202100493

IF: 5.56

2021-01-01

Chinese Journal of Chemistry

Abstract:Main observation and conclusionImine‐linked covalent organic frameworks (COFs) have attracted extensive attention due to designable structures, tunable properties, and excellent thermal and chemical stability. They were typically obtained as insoluble and unprocessable powders, which seriously limits their full promise. Progress has been made in the synthesis of thin films of imine‐linked COFs by interfacial synthesis. However, the synthesis of highly crystalline, self‐supporting thin films of COFs remains challenging. Here, we employed a surfactants‐mediated method to synthesize such films at an air‐water interface, showed the films could be transferred onto arbitrary substrates on demand, and demonstrated the generality of the methodology with two different COFs. We found that the length of hydrophobic segments of surfactants played a key role in determination of the crystallinity and single crystalline domain size of the films. This work provides a feasible strategy to generate highly crystalline thin films of COFs.
Deployment of Superhydrophilic and Super-antifouling Cr-soc-MOF-1-Based Membrane for Ultrafast Separation of Stabilized Oil-in-Water Emulsions.

M. Obaid,N. Ghaffour,Sheng Zhou,M. Eddaoudi,Norah Alsadun,O. Shekhah,Sarah Almahfoodh

DOI: https://doi.org/10.1021/acsami.3c05285

2023-06-13

Abstract:In spite of massive progress in oil-water separation, attributable to the use of advanced materials, the separation process faces challenges such as low permeance and fouling problems. Therefore, superwettable materials used in several fields are considered potential candidates for oily wastewater treatment. Metal-organic frameworks (MOFs) are receiving more and more interest in various separation applications due to their wide potential applications. Nevertheless, MOFs have been rarely explored for separating stabilized oil-in-water emulsions due to the difficulty in finding highly hydrolytic stable MOF candidates for this application. Furthermore, oil can clog water-stable materials owing to its high density, causing the degradation of MOF particles. As a result, there is a need to develop better MOF materials that can fulfill these requirements. Herein, we have explored Cr-soc-MOF-1 as a candidate for this application and deployed it as a membrane, which exhibited superhydrophilicity and underwater superoleophobicity for separating stabilized oil-in-water emulsions. The Cr-soc-MOF-1 membranes were synthesized by assembling the as-prepared MOF particles on a mixed cellulose ester substrate using a vacuum-assisted self-assembly technique. The Cr-soc-MOF-1 membrane exhibited ultrahigh water permeance (7465.9 L·m-2·h-1·bar-1), very high oil rejection (99.9%), and excellent anti-oil-fouling properties. The Cr-soc-MOF-1 membranes also exhibited excellent recyclability over 10 continuous separation cycles. Further, they exhibited an outstanding performance in separating various surfactant-stabilized oil-in-water emulsions. Thus, the Cr-soc-MOF-1 membranes exhibit a high potential in treating oily wastewater.

Environmental Science,Engineering,Medicine,Chemistry
Robust covalent organic frameworks membranes for ultrafast dye/salt separation in harsh environments

Jia-Yue Dai,Yin-Xin Fang,Zhen-Liang Xu,Dibakar Pandaya,Jing Liang,Hong-Fei Yan,Yong-Jian Tang

DOI: https://doi.org/10.1016/j.desal.2023.117025

IF: 11.211

2023-12-01

Desalination

Abstract:Although covalent organic frameworks (COFs) membranes have promising applications in water treatment due to their ordered structure and adjustable pore size, most of them are imine-linked ones, which severely limits their application in harsh environments. Herein, we offer a stable novel COFs membrane which is composed of hydrazone bonds and β-ketoenamine structures. Such β-ketoenamine based COFs composite membrane was fabricated via interfacial catalytic polymerization on a nylon substrate, which was generated at the water (P-Toluenesulfonic acid)/n-hexane (2,5-dimethoxyterephthalhydrazide, 1,3,5-triformylphoroglucinol) interface. The resultant COFs membrane demonstrates excellent chemical stability in strong acidic (2 mol/L)/alkaline (9 mol/L)/organic solvents (dioxane, acetone, methanol, and ethanol) media. The optimized COFs membrane achieved 109.73 L m−2 h−1 bar−1 permeance in Congo Red aqueous solution and 99.56 % CR rejection. This study exploits a novel approach to produce robust COFs membranes under extreme conditions.

engineering, chemical,water resources

Effects of solution chemistry on arsenic(V) removal by low-cost adsorbents.

Two‐Dimensional Fluorinated Covalent Organic Frameworks with Tunable Hydrophobicity for Ultrafast Oil–Water Separation

Smart superwetting COF membrane for controllable oil/water separation

Integrating Superwettability Within Covalent Organic Frameworks for Functional Coating

A Superhydrophobic Trifluoromethyl-Containing Covalent Organic Framework Membrane for Efficient Oil/Water Separation

An eco-friendly approach by nonfluorous self-cleaning metal-organic framework composite and membrane for oil-water separation

Super-hydrophilic membranes fabricated by synergistic integration of covalent organic framework nanoflowers and hydrophilic layers for efficient oil-water separation

Fluorine-Functionalized Covalent Organic Framework Superhydrophobic Modified Melamine Sponge for Efficient oil–water Separation

The normally expressed κ immunoglobulin light chain gene repertoire and somatic mutations studied by single‐sided specific polymerase chain reaction (PCR); frequent occurrence of features often assigned to autoimmunity

Modelling of radio wave propagation using Finite Element Analysis

Room-temperature synthesis of fluorinated covalent organic framework decorated superhydrophobic sponges for highly efficient crude oil spill cleanup

Synergistic effects of COF and GO on high flux oil/water separation performance of superhydrophobic composites

De Novo Fabrication of Large-Area and Self-Standing Covalent Organic Framework Films for Efficient Separation

Enabling Solution Processable COFs through Suppression of Precipitation during Solvothermal Synthesis.

Molecular and structural design of polyacrylonitrile-based membrane for oil-water separation

Metal-Organic Framework (MOF) Derived Recyclable, Superhydrophobic Composite of Cotton Fabrics for the Facile Removal of Oil Spills.

Framework reinforced orderly-woven superhydrophobic metal–carbon composites for efficient emulsion separation in harsh environments

Urchin-like fluorinated covalent organic frameworks decorated fabric for effective self-cleaning and versatile oil/water separation

Surfactants Mediated Synthesis of Highly Crystalline Thin Films of Imine‐Linked Covalent Organic Frameworks on Water Surface

Deployment of Superhydrophilic and Super-antifouling Cr-soc-MOF-1-Based Membrane for Ultrafast Separation of Stabilized Oil-in-Water Emulsions.

Robust covalent organic frameworks membranes for ultrafast dye/salt separation in harsh environments