Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

A Simulation and an Experimental Study of Space Harpoon Low-Velocity Impact, Anchored Debris

Dynamic Simulation and Parameter Analysis of Harpoon Capturing Space Debris

Study on Impact Process of Auv Underwater Docking with A Cone-Shaped Dock

Free-Fall Penetration Behaviors of A New Dynamically Installed Plate Anchor in Marine Clay

Numerical Simulations of Plate Blade Impacting Target

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Study on Impact Energy Absorption and Adhesion of Biomimetic Buffer System for Space Robots

Three-dimensional Characterization of Debris Clouds under Hypervelocity Impact with Pulsed Digital Inline Holography.

Hypervelocity Impact Detection and Location for Stiffened Structures Using a Probabilistic Hyperbola Method

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

Experimental and numerical study of water-filled vessel impacted by flat projectiles

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Contact dynamic analysis of tether-net system for space debris capture using incremental potential formulation

Simulation on hypervelocity impact characteristics of stuffed corrugation-cored sandwiches

Experimental and numerical investigations on the transient impact load of the oblique water entry of the concave-nose projectiles

Experimental Research on Hypervelocity Projectile Intruding Water

Internal-structure-model based simulation research of shielding properties of honeycomb sandwich panel subjected to high-velocity impact

Study on damage mechanism and damage distribution of the rear plate under impact of debris cloud

Comparison of Tethered Post-Capture System Models for Space Debris Removal

Design of a low-velocity impact framework for evaluating space-grade materials

Dynamic Simulation of Space Debris Cloud Capture Using the Tethered Net