Abstract:During the past two decades, wearable devices have been broadly used for a variety of fields such as biomedical system, communication and microelectronics. The power system such as lithium-ion batteries is essential to the operation of wearable devices, which should adapt to irregular substrates and sustain complex deformations. A promising strategy is to fabricate high-performance energy storage devices in a fiber shape, e.g., fiber lithium-ion batteries (LIBs). These fiber LIBs with diameters ranging from tens to hundreds of micrometers can be readily integrated with human body and work stably under constant body motions. They can also be woven into breathable fabrics to satisfy the needs of wearable electronics. The key challenges facing fiber LIBs include effective loading of active materials on fiber electrodes, efficient charge transfer along fiber electrodes and interface stability of fiber electrodes under operation and deformation. Fiber electrodes are thus designed with hierarchical and aligned channels to effectively load active materials, so an effective electric field can be established between the fiber cathode and anode. Aligned carbon nanotubes (CNTs) can be made with conductive additives and active materials into fiber electrodes by a continuous spinning process. Conventional metal current collectors, binders and conductive agents are not required, and active materials may reach 90% of the electrode by weight. The resulting hierarchically helical CNT fiber electrode shows high flexibility, high strength, and high electrical conductivity. The flexural rigidity is as low as 10-7 nN/m(2), which is several orders of magnitude lower than those of ordinary synthetic fibers. The specific strength reaches 107 Nm/kg, which is higher than those of ordinary synthetic fibers. The conductivity reaches 10(4) S/cm, which can meet the needs of batteries. The aligned CNT composite fiber permits efficient electron transport, where the electrons hop among neighboring CNTs. Besides, due to the capillary force, the electrolyte can penetrate throughout the entire fiber via micrometer-sized and nanometer-sized channels, benefiting ion transport. The twisted CNT bundles firmly bind active materials and prevent their significant volume variations during charge and discharge processes. Therefore, the efficient conductive pathways can be maintained to deliver both high rate and cyclic stability. Fiber LIBs could be fabricated by assembling two fiber electrodes in parallel, twisting or coaxial structure. Gel electrolyte avoids the potential safety risks stemmed from liquid electrolytes. The continuously fiber LIBs show both high flexibility and energy storage capacity. After bending for 100000 cycles, the capacities have been well maintained, and the energy densities exceed 100 Wh/kg. Based on the similar strategy, a series of fiber energy storage devices such as supercapacitors, lithium-sulfur batteries, lithium-air batteries, zinc-ion batteries, zincair batteries and aluminum-air batteries, have been also produced. To summarize, fiber energy storage devices can be woven into flexible fabrics or integrated with energy harvesting devices to satisfy the next-generation electronics. Such a new strategy establishes an efficient avenue to particularly accelerate the development of wearable electronics in the future.

Robust, Conductive, and High Loading Fiber-Shaped Electrodes Fabricated by 3D Active Coating for Flexible Energy Storage Devices

A Universal Strategy to Fabricate Metal Sulfides@Carbon Fibers As Freestanding and Flexible Anodes for High-Performance Lithium/Sodium Storage

Conductive Cellulose Nanofiber Enabled Thick Electrode for Compact and Flexible Energy Storage Devices

Realizing High Energy Density and Flexibility of Fabric Electrode through Hierarchical Structure Design

Iron Oxides Nanobelt Arrays Rooted in Nanoporous Surface of Carbon Tube Textile As Stretchable and Robust Electrodes for Flexible Supercapacitors with Ultrahigh Areal Energy Density and Remarkable Cycling-Stability

<i>In</i><i>-situ</i> interface reinforcement for 3D printed fiber electrodes

Highly-Efficient Dendritic Cable Electrodes for Flexible Supercapacitive Fabric.

Boosting the Lithium Storage Properties of a Flexible Li4Ti5O12/Graphene Fiber Anode via a 3D Printing Assembly Strategy

Flexible Wire-Shaped Lithium-Sulfur Batteries with Fibrous Cathodes Assembled Via Capillary Action

A General Electrode Design Strategy for Flexible Fiber Micro-Pseudocapacitors Combining Ultrahigh Energy and Power Delivery.

Cellulose-based high-loading flexible electrode for lithium-ion battery with high volumetric energy density

Robust Electrodes for Flexible Energy Storage Devices Based on Bimetallic Encapsulated Core–Multishell Structures

A Flexible Asymmetric Fibered-Supercapacitor Based on Unique Co 3 O 4 @ppy Core-Shell Nanorod Arrays Electrode

Highly Stable, Stretchable, and Versatile Electrodes by Coupling of NiCoS Nanosheets with Metallic Networks for Flexible Electronics

Constructing Carbon Nanotube Hybrid Fiber Electrodes with Unique Hierarchical Microcrack Structure for High‐Voltage, Ultrahigh‐Rate, and Ultralong‐Life Flexible Aqueous Zinc Batteries

In-situ fabrication of carbon-metal fabrics as freestanding electrodes for high-performance flexible energy storage devices

A Three‐Dimensionally Interconnected Carbon Nanotube–Conducting Polymer Hydrogel Network for High‐Performance Flexible Battery Electrodes

Flexible Electrodes with High Areal Capacity Based on Electrospun Fiber Mats

A Phytic Acid Etched Ni/Fe Nanostructure Based Flexible Network As A High-Performance Wearable Hybrid Energy Storage Device

Research Progress of Fiber-Shaped Electrochemical Energy Storage Devices

Structural Engineering of Ultrathin, Lightweight, and Bendable Electrodes Based on a Nanowire Network Current Collector Enables Flexible Energy-Storage Devices