Unsupervised Extraction of Appraisal Expressions

K. Bloom,S. Argamon

DOI: https://doi.org/10.1007/978-3-642-13059-5_31

2010-05-31

Abstract:

What problem does this paper attempt to address?

Direct Detection of Dilute Solid Chemicals with Responsive Lateral Organic Diodes

Jia Huang,Guoipan Zhang,Xingang Zhao,Xiaohan Wu,Dapeng Liu,Yingli Chu,Howard E. Katz

DOI: https://doi.org/10.1021/jacs.7b06223

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Organic field-effect transistors (OFETs) have emerged as promising sensors targeting chemical analytes in vapors and liquids. However, the direct detection of solid chemicals by OFETs has not been achieved. Here for the first time, we describe the direct detection of solid chemical analytes by organic electronics. An organic diode structure based on a horizontal side-by-side p-n junction was adopted and shown to be superior to OFETs for this purpose. The diodes showed more than 40% current decrease upon exposure to 1 ppm melamine powders. The estimated detection limit to melamine can potentially reach the ppb range. This is the first demonstration of an electronic signal from an interaction between a solid and an organic p-n junction directly, which suggests that our lateral organic diodes are excellent platforms for the development of future sensors when direct detection of solid chemicals is needed. The approach developed here is general and can be extended to chemical sensors targeting various analytes, opening unprecedented opportunities for the development of low-cost and high-performance solid chemical sensors.
Construction of Ce-MOF@COF hybrid nanostructure: Label-free aptasensor for the ultrasensitive detection of oxytetracycline residues in aqueous solution environments

Nan Zhou,Yashen Ma,Bin Hu,Linghao He,Shijun Wang,Zhihong Zhang,Siyu Lu

DOI: https://doi.org/10.1016/j.bios.2018.12.024

2019-02-15

Abstract:Porous organic framework (COF) nanomaterials have drawn increasing attention and showed promising potential in the applications of various fields. Nevertheless, its applications in biosensing or biomedical fields are still in the early stage. In this work, we designed and synthesized a series of nanohybrids of COF and Ce-based metal organic framework (Ce-MOF) for the first time as label-free bioplatforms for a sensitive electrochemical aptasensor to detect oxytetracycline (OTC). A novel kinds of Ce-MOF@COF hybrids were prepared by adding different dosages of COF, into the preparation system of Ce-MOF, for which COF was synthesized using melamine and cyanutic acidmonomers through polycondensation (represented by MCA). Basic characterizations revealed that Ce-MOF@MCA nanohybrids not only remained their orignal crystal and chemical structure and features, such as different Ce species containing in Ce-MOF (Ce3+ and Ce4+), various functional amino-groups of MCA, and individual frameworks, but also showed a large specific surface area and interpenetrated morphologies. As a result, the Ce-MOF@MCA hybrid with high content of MCA exhibited high bioaffinity toward the OTC-targeted aptamer, further leading to the incremental detection effect for OTC detection. Among different hybrid-based aptasensors, the Ce-MOF@MCA-based one with an MCA dosage of 500 mg exhibited the lowest limit of detection at 17.4 fg mL-1 within a wider linearity of the OTC concentration within 0.1-0.5 ng mL-1. Additionally, the fabricated aptasensor displayed excellent analytical performance with great reproducibility, high selectivity and stability, and acceptable applicability for detecting OTC in various aqueous solutions, including milk, wastewater, and urine samples. This new Ce-MOF@MCA hybrid will become an excellent aptasensors platform for detecting various analytes, such as antibiotics, heavy metal ions, or cancer markers, and it have shown the promissing application potentials in the fields of biomedicine, food safety and environmental monitoring.
Molecularly Imprinted Poly(thionine)-Based Electrochemical Sensing Platform for Fast and Selective Ultratrace Determination of Patulin

Qingwen Huang,Zhihui Zhao,Dongxia Nie,Keqiu Jiang,Wenbo Guo,Kai Fan,Zhiqi Zhang,Jiajia Meng,Yongjiang Wu,Zheng Han

DOI: https://doi.org/10.1021/acs.analchem.8b05791

IF: 7.4

2019-01-01

Analytical Chemistry

Abstract:An innovative approach based on a surface functional monomer-directing strategy for the construction of a sensitive and selective molecularly imprinted electrochemical sensor for patulin recognition is described. A patulin imprinted platinum nanoparticle (PtNP)-coated poly(thionine) film was grown on a preformed thionine tailed surface of PtNP-nitrogen-doped graphene (NGE) by electro-polymerization, which provided high capacity and fast kinetics to uptake patulin molecules. Thionine acted not only as a functional monomer for molecularly imprinted polymer (MIP), but also as a signal indicator. Enhanced sensitivity was obtained by combining the excellent electric conductivity of PtNPs, NGE, and thionine with multisignal amplification. The designed sensor displayed excellent performance for patulin detection over the range of 0.002-2 ng mL(-1) (R-2 = 0.995) with a detection limit of 0.001 ng mL(-1) for patulin. In addition, the resulting sensor showed good stability and high repeatability and selectivity. Furthermore, the feasibility of its applications has also been demonstrated in the analysis of real samples, providing novel tactics for the rational design of MIP-based electrochemical sensors to detect a growing number of deleterious substances.
Detection of tetracycline by molecularly imprinted electrochemical sensor based on the modification of poly(3,4-propylene dioxythiophene)/chitosan/au

Qian Cheng,Tursun Abdiryim,Ruxangul Jamal,Xiong Liu,Fangfei Liu,Cong Xue,Xinsheng Tang,Jiaying Chen,Jin Wei

DOI: https://doi.org/10.1016/j.ijbiomac.2024.136468

IF: 8.2

2024-10-14

International Journal of Biological Macromolecules

Abstract:In this study, a molecularly imprinted polymer (MIP) electrochemical sensor based on poly(3,4-propylenedioxythiophene)/chitosan/Au (PProDOT/CS/Au) composite modification was designed for highly sensitive and selective detection of TC. Green synthesis of CS/Au without the use of reducing agents, followed by in-situ oxidation polymerization of PProDOT. The high electrochemical activity and high stability of PProDOT, the numerous functional groups (-OH, -NH 2 ) of CS, and the excellent electron transport capacity of AuNPs, which provided a suitable incubation chamber for the production of imprinted cavities. Meanwhile, combined with the specific recognition ability of MIP, it showed superior performance over bare glassy carbon electrodes. Under the optimal experimental conditions, this sensor showed good linearity for TC in the concentration ranges of 0.0001–100 μM, with a low limit of detection (LOD) of 0.19 nM. At the same time, the sensor exhibited satisfactory selectivity, repeatability, reproducibility and stability. It was evident from the results of the study that the sensor designed in this paper showed considerable potential for application in the detection of TC in pharmaceuticals, the environment, and food samples.

polymer science,biochemistry & molecular biology,chemistry, applied
Integrated Sensing Platform Validated for the Efficient and On-Site Screening of Amine-Containing Illicit Drugs

Jiashuang Yao,Chun Yang,Ruijuan Wen,Taihong Liu,Liping Ding,Zhen Yao,Yu Fang

DOI: https://doi.org/10.1021/acssensors.4c00787

2024-09-27

Abstract:Efficient and reliable technologies for the on-site detection of illicit drugs are important in drug-facilitated crime investigations. However, the development of such technologies is challenging. Based on the synthetic optimization, introducing a boron ester functional group to the two furanic indicators endows the stimulus-responsive properties synergistically. The ring-opening reaction of the indicators in the presence of amine-containing illicit drugs generated well-known donor-acceptor Stenhouse adducts, accompanied by strong color changes. A small-size and lightweight laminated sensor was integrated based on the outstanding ratiometric variations of the two active furanic indicators. A prototype platform was fabricated equipped with a circuit control, a mini pump, and a signal processing system. A user-friendly detection and efficient screening of amine-containing illicit drugs, including phenethylamines, amphetamines, cathinones, and tryptamines in the liquid states were conducted. The ratiometric response of the sensor was linear in the concentration range of 2.1-10.6 μg·mL-1 for methamphetamine·HCl and methcathinone ·HCl. The detection limits for the two illicit drugs at the sublevel (ng·mL-1) were found to be 8.4 and 9.0 ng·mL-1, respectively. Double-blind field tests and different illicit drugs were evaluated with good screening capability. Successful trials showed the potential applications of the developed prototype platform for efficient and on-site analytical determination.
MXene@MnIn2S4‐Gated Organic Photoelectrochemical Transistors with Nanozyme‐Mediated Multiple Quenching Effects for Ultrasensitive Detection of Okadaic Acid

Jingtian Chi,Peng Ju,Fan Bi,Shiliang Wang,Tiantong Jiang,Siyu Wen,Yueyuan Cai,Xiaofei Yin,Meng Qiu

DOI: https://doi.org/10.1002/adfm.202407201

IF: 19

2024-06-06

Advanced Functional Materials

Abstract:The organic photoelectrochemical transistor (OECT) is rationally integrated with a heterojunction of MXene‐MnIn2S4 with efficient light‐electric conversion. The Faradaic regime of the OECT can thus be broadened towards zero gate bias under light illumination. Amperometric output with enhanced signal resolution can be obtained with nanozymatic biocatalytic precipitation. Organic optoelectronics have attracted widespread interdisciplinary research interest but lags far behind in the application in marine environmental detection. The organic photoelectrochemical transistor (OPECT) shows promise as a powerful tool for comprehensive monitoring and early warning of marine conditions, which can be further enhanced by the valuable signal amplification strategy of nanozyme‐mediated catalytic precipitation. Herein, OPECT technology is integrated with nanozyme‐mediated catalytic precipitation for the first time, establishing an ultrasensitive detection platform for okadaic acid (OA). Specifically, MXene@MnIn2S4 (MXMnIS) hybrid composed of Schottky‐junction is synthesized via a hydrothermal method, which can efficiently modulate the device with high current gain. Linking with a sandwich immunoassay, the Ru‐C3N4 nanozyme with peroxidase‐mimicking activity can catalyze the oxidation of 4‐chloro‐1‐naphthol (4‐CN) to form an insoluble precipitate on the electrode surface, resulting in a decrease in the photocurrent and altering the transistor response. Importantly, the proposed OPECT biosensor presented an excellent sensitivity and a low detection limit (32.5 pM), fully satisfying the fundamental requirements for the quantitative detection of intracellular and extracellular OA in the practical culture media of Prorocentrum lima at different growth stages. This OPECT platform based on the nanozyme‐mediated quenching effect is significant for effectively monitoring the safety of the marine ecological environment and food safety.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Design and Fabrication of Ultrathin Nanoporous Donor-Acceptor Copolymer-Based Organic Field-Effect Transistors for Enhanced VOC Sensing Performance

Vinh Van Tran,Ganghoon Jeong,Eunsol Wi,Daeho Lee,Mincheol Chang

DOI: https://doi.org/10.1021/acsami.3c00105

2023-05-03

Abstract:The development of organic field-effect transistor (OFET) chemical sensors with high sensing performance and good air stability has remained a persistent challenge, thereby hindering their practical application. Herein, an OFET sensor based on a donor-acceptor copolymer is shown to provide high responsivity, sensitivity, and selectivity toward polar volatile organic compounds, as well as good air stability. In detail, a polymer blend of N-alkyl-diketopyrrolo-pyrrole-dithienylthieno[3,2-b]thiophene (DPP-DTT) and polystyrene is coated onto an FET substrate via shearing-assisted phase separation (SAPS) combined with selective solvent etching to fabricate the DPP-DTT-based OFET device having an ultrathin nanoporous structure suitable for gas sensing applications. This is achieved via optimization of the film morphology by varying the shear rate to adjust the dynamic balance between the shear and capillary forces to obtain an ultrathin thickness (∼8 nm) and nanopore size (80 nm) that are favorable for the efficient diffusion and interaction of analytes with the active layer. In particular, the sensor presents high responsivities toward methanol (∼70%), acetone (∼51.3%), ethanol (∼39%), and isopropyl alcohol (IPA) (∼29.8%), along with fast response and recovery times of ∼80 and 234 s, respectively. Moreover, the average sensitivity was determined to be 5.75%/ppm from the linear plot of the responsivity against the methanol concentration in the range of 1-100 ppm. Importantly, the device also exhibits excellent long-term (30-day) air and thermal storage stability, thereby demonstrating its high potential for practical applications.
Multi-Oxyanion Detection by an Organic Field-Effect Transistor with Pattern Recognition Techniques and Its Application to Quantitative Phosphate Sensing in Human Blood Serum

Riho Mitobe,Yui Sasaki,Wei Tang,Qi Zhou,Xiaojun Lyu,Kohei Ohshiro,Masao Kamiko,Tsuyoshi Minami

DOI: https://doi.org/10.1021/acsami.1c21092

2022-01-18

Abstract:We herein report an organic field-effect transistor (OFET) based chemical sensor for multi-oxyanion detection with pattern recognition techniques. The oxyanions ubiquitously play versatile roles in biological systems, and accessing the chemical information they provide would potentially facilitate fundamental research in diagnosis and pharmacology. In this regard, phosphates in human blood serum would be a promising indicator for early case detection of significant diseases. Thus, the development of an easy-to-use chemical sensor for qualitative and quantitative detection of oxyanions is required in real-world scenarios. To this end, an extended-gate-type OFET has been functionalized with a metal complex consisting of 2,2'-dipicolylamine and a copper(II) ion (Cu<sup>II</sup>-dpa), allowing a compact chemical sensor for oxyanion detection. The OFET combined with a uniform Cu<sup>II</sup>-dpa-based self-assembled monolayer (SAM) on the extended-gate gold electrode shows a cross-reactive response, which suggests a discriminatory power for pattern recognition. Indeed, the qualitative detection of 13 oxyanions (i.e., hydrogen monophosphate, pyrophosphate, adenosine monophosphate, adenosine diphosphate, adenosine triphosphate, terephthalate, phthalate, isophthalate, malonate, oxalate, lactate, benzoate, and acetate) has been demonstrated by only using a single OFET-based sensor with linear discriminant analysis, which has shown 100% correct classification. The OFET has been further applied to the quantification of hydrogen monophosphate in human blood serum using a support vector machine (SVM). The multiple predictions of hydrogen monophosphate at 49 and 89 μM have been successfully realized with low errors, which indicates that the OFET-based sensor with pattern recognition techniques would be a practical sensing platform for medical assays. We believe that a combination of the OFET functionalized with the SAM-based recognition scaffold and powerful pattern recognition methods can achieve multi-analyte detection from just a single sensor.

materials science, multidisciplinary,nanoscience & nanotechnology
Highly selective and responsive detection of simetryn in tobacco samples based on molecularly imprinted photonic crystal hydrogels

Tong Zhenhao,Li Guodong,Gu Lili,Li Ziyi,Du Kang,Liu Donghui,Peng Jian

DOI: https://doi.org/10.1016/j.polymertesting.2021.107386

IF: 5.1

2021-12-01

Polymer Testing

Abstract:A novel sensor was developed based on the combination of photonic crystal templating and molecular imprinting technique (MIT) for the detection of simetryn in tobacco samples. The molecularly imprinted photonic crystal hydrogels (MIPHs) was prepared with methacrylic acid (MAA) as monomers, ethylene glycol dimethylacrylate (EGDMA) as cross-linkers, simetryn as imprinting template molecules and polystyrene (PS) microspheres as photonic crystal template. The ordered three-dimensional macro-porous structure of MIPHs with simetryn imprinting template can generate Bragg diffraction, showing a bright structural color. The results show that the MIPHs have high selectivity and excellent sensing performance and can be used for the detection of simetryn from actual tobacco samples. Among the four triazine herbicides with similar structure, MIPHs only produced obvious Bragg diffraction peak wavelength change to simetryn, and MIPHs have good recoverability with four cycle times. When the concentration of simetryn in the actual tobacco increased from 0 to 1.0 μg/mL, the wavelength was red-shifted from 457 nm to 499 nm, which was in the blue and green visible light wavelength range. This new sensor is expected to be used to directly detect pesticide residues in tobacco.

materials science, characterization & testing,polymer science
GeneDesign: rapid, automated design of multikilobase synthetic genes.

S. Richardson,S. Wheelan,R. Yarrington,J. Boeke

DOI: https://doi.org/10.1101/GR.4431306

IF: 9.438

2006-04-01

Genome Research

Abstract:Modern molecular biology has brought many new tools to the geneticist as well as an exponentially expanding database of genomes and new genes for study. Of particular use in the analysis of these genes is the synthetic gene, a nucleotide sequence designed to the specifications of the investigator. Typically, synthetic genes encode the same product as the gene of interest, but the synthetic nucleotide sequence for that protein may contain modifications affecting expression or base composition. Other desirable changes typically involve the revision of restriction sites. Designing synthetic genes by hand is a time-consuming and error-prone process that may involve several computer programs. We have developed a tools environment that combines many modules to provide a platform for rapid synthetic gene design for multikilobase sequences. We have used GeneDesign to successfully design a synthetic Ty1 element and a large variety of other synthetic sequences. GeneDesign has been implemented as a publicly accessible Web-based resource and can be found at http://slam.bs.jhmi.edu/gd.
A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles.

Xiaoli Xu,Guoliang Zhou,Huixiang Li,Qian Liu,Song Zhang,Jilie Kong

DOI: https://doi.org/10.1016/j.talanta.2008.10.041

IF: 6.1

2009-01-01

Talanta

Abstract:A sensitive molecularly imprinted electrochemical sensor was created for selective detection of a tricyclic antidepressant imipramine by combination of Au nanoparticles (Au-NPs) with a thin molecularly imprinted film. The sensor was fabricated onto the indium tin oxide (ITO) electrode via stepwise modification of Au-NPs by self-assembly and a thin film of molecularly imprinted polymers (MIPs) via sol–gel technology. It was observed that the molecularly imprinted film displayed excellent selectivity towards the target molecule imipramine. Meanwhile, the introduced Au-NPs exhibited noticeable catalytic activities towards imipramine oxidation, which remarkably enhanced the sensitivity of the imprinted film. Due to such combination, the as-prepared sensor responded quickly to imipramine, within only 1min of incubation. The differential voltammetric anodic peak current was linear to the logarithm of imipramine concentration in the range from 5.0×10−6 to 1.0×10−3molL−1, and the detection limits obtained was 1.0×10−9molL−1. This method proposed was successfully applied to the determination of imipramine in drug tablets, and proven to be reliable compared with conventional UV method. These results reveal that such a sensor fulfills the selectivity, sensitivity, speed and simplicity requirements for imipramine detection, and provides possibilities of clinical application in physiological fluids.
Enabling the aqueous solution sensing of skin-conformable organic field-effect transistor using an amphiphilic molecule

Wei Shi,Qingyuan Li,Yunpeng Zhang,Kai Liu,Xin Huang,Xueli Yang,Yang Ran,Yifan Li,Yunlong Guo,Yunqi Liu

DOI: https://doi.org/10.1016/j.apmt.2021.101275

IF: 8.663

2022-03-01

Applied Materials Today

Abstract:Research on aqueous solution sensor has immense demand in biological sensing applications. While traditional organic field-effect transistors (OFETs) have shown promising prospect in the field of sensing, their application in the aqueous solution sensing far lag behind since the aqueous environment strongly limits the organic materials to work. Here, we design, somewhat counterintuitively, an approach to increase the affinity of OFET to aqueous solution by adding amphiphilic molecule in the hydrophobic semiconductor. This method enables the aqueous solution sensing of the OFET through providing a good wettability between the OFET and the aqueous environment. Benefiting from this, the OFET can detect glucose aqueous solution in the human blood range (0.5–2 mg/mL) and the strongest response derived from the variation of mobility is as high as 5600% when applied 1 mg/mL glucose solution. Under a curvature radius of 7.5 mm, the OFET still maintains the sensitivity to glucose down to 0.5 mg/mL. The sensing performance is tunable through changing the amphiphilic molecule with different Hydrophile-Lipophile Balance value and introducing dielectric material in semiconductor. In addition, the selective detection to aqueous solutions of glucose, raffinose, starch, and lactic acid is realized. Portable real-time detection is achieved by integrating the OFET with wireless transmission and a smartphone. When the glucose concentration exceeds the limit, a red-light signal can be triggered as a warning. The work develops a simple approach for OFET to achieve aqueous solution detection.

materials science, multidisciplinary
Ultrasensitive Specific Stimulant Assay Based on Molecularly Imprinted Photonic Hydrogels

Xiaobin Hu,Guangtao Li,Mohan Li,Jing Huang,Yan Li,Yongbin Gao,Yihe Zhang

DOI: https://doi.org/10.1002/adfm.200700527

IF: 19

2008-01-01

Advanced Functional Materials

Abstract:Taking theophylline and (1R,2S)‐(−)‐ephedrine as template molecules, two imprinted photonic‐hydrogel films are prepared by a combination of colloidal‐crystal and molecular‐imprinting techniques. This paper shows a new approach for rapid and handy stimulant detection with high sensitivity and specificity. One film is proposed for analogous molecule assay, another one for chiral recognition. The key point of this approach is that the imprinted photonic polymer (IPP) consists of a three‐dimensional (3D), highly‐ordered and interconnected macroporous array with a thin hydrogel wall, where nanocavities complementary to analytes in shape and binding sites are distributed. This special, bicontinuous, hierarchical structure enables this polymer to report quickly, easily, sensitively and directly a molecular recognition event without any transducers and treatments for analytes (label‐free). The inherent affinity of the nanocavities, deriving from molecular imprinting, makes these sensors highly specific to analytes, even if in a competitive environment. Their sensitive and specific responses to stimulants in buffer are determined by Bragg diffractive shifts due to the lattice change of their 3D ordered macroporous arrays resulting from their preferential rebinding to the target molecules. The measurements show that the prepared hydrogel films exhibit high sensitivity in such a 0.1 fM concentration of analytes and specificity even in a competitive urinous buffer. The reported method provides a rapid and handy approach for stimulant assay and drug analysis in athletic sports.
Fabrication of Molecularly Imprinted Electrochemical Sensor for Selective Detection of Propranolol Hydrochloride

Li Hui-Xiang,Xu Xiao-Li,Chen Hui,Zhang Song,Kong Ji-Lie

DOI: https://doi.org/10.3724/sp.j.1096.2012.11128

IF: 1.193

2012-01-01

Chinese Journal of Analytical Chemistry

Abstract:A sensitive molecularly imprinted electrochemical sensor was fabricated for selective detection of propranolol hydrochloride by electropolymerization of dopamine on glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWNTs). The electrochemical performance and morphology of the imprinted sensor were characterized by scanning electron microscope (SEM), cyclic voltammetry (CV), differential pulse voltammetry (DPV). The test conditions were optimized and the selective response to the structurally similar compounds of propranolol hydrochloride was studied. The results showed that the sensor had the advantage of good selectivity and the sensitivity increased greatly due to the introduction of MWNTs. A linear relationship was obtained between the current and the concentration of propranolol hydrochloride over a range from 0.20 μM to 100 μM with a detection limit of 2.53 × 10−8 M (S/N = 3). Moreover, the sensor exhibited excellent stability and reproducibility.
A highly sensitive TiO 2 -based molecularly imprinted photoelectrochemical sensor with regulation of imprinted sites by Photo-deposition

Guohao Yan,Zhe Han,Xinghui Hou,Shasha Yi,Zongtao Zhang,Ying Zhou,Liying Zhang

DOI: https://doi.org/10.1016/j.jcis.2023.07.105

IF: 9.9

2023-07-21

Journal of Colloid and Interface Science

Abstract:Molecularly imprinted photoelectrochemical sensors (MIPES) have gained significant attention in the detection field due to their high selectivity and accuracy. However, their sensitivity still needs improvement. Here we developed a TiO 2 -based MIPES (TiO 2 NRs/NiOOH/rMIP) to detect ciprofloxacin (CIP). We identified the photoactive sites of TiO 2 by NiOOH photo-deposition and anchored the imprinted sites on the photoactive sites by complexation between CIP and NiOOH. By regulating the imprinted sites, the photocurrent difference before and after the addition of CIP increases and the detection sensitivity of CIP is improved. Moreover, a PN heterojunction is formed between TiO 2 and NiOOH, which enables rapid transfer of photoexcited holes and electrons to different semiconductors under the built-in electric field. This leads to improved photoactivity of TiO 2 and further increases the sensitivity of MIPES. Compared with sensors prepared by the traditional electro-polymerization CIP and Molecularly imprinted polymers (TiO 2 NRs/NiOOH/eMIP), TiO 2 NRs/NiOOH/rMIP as constructed in this work displays higher sensitivity, wider linear detection range, and lower limit of detection (LOD). Additionally, TiO 2 NRs/NiOOH/rMIP shows good selectivity, stability, and recovery rate, and has a promising application prospect in the actual detection of antibiotics.

chemistry, physical
Highly Stable Organic Polymer Field-Effect Transistor Sensor for Selective Detection in the Marine Environment

Oren Knopfmacher,Mallory L. Hammock,Anthony L. Appleton,Gregor Schwartz,Jianguo Mei,Ting Lei,Jian Pei,Zhenan Bao

DOI: https://doi.org/10.1038/ncomms3954

IF: 16.6

2014-01-01

Nature Communications

Abstract:In recent decades, the susceptibility to degradation in both ambient and aqueous environments has prevented organic electronics from gaining rapid traction for sensing applications. Here we report an organic field-effect transistor sensor that overcomes this barrier using a solution-processable isoindigo-based polymer semiconductor. More importantly, these organic field-effect transistor sensors are stable in both freshwater and seawater environments over extended periods of time. The organic field-effect transistor sensors are further capable of selectively sensing heavy-metal ions in seawater. This discovery has potential for inexpensive, ink-jet printed, and large-scale environmental monitoring devices that can be deployed in areas once thought of as beyond the scope of organic materials.
A molecularly imprinted photoelectrochemical sensor based on rGO/MoSSe heterojunction for the detection of chlortetracycline

Wanjin Huang,Shufei Tang,Wei Xiao,Yafei Chen,Lijun Li,Jianping Li

DOI: https://doi.org/10.1039/d4an00172a

2024-02-09

The Analyst

Abstract:A reduced graphene oxide/molybdenum selenosulfide (rGO/MoSSe) heterojunction was synthesized, and a molecularly imprinted photoelectrochemical sensor for the detection of chlortetracycline was prepared. MoSSe was grown in situ on rGO by hydrothermal method to form an rGO/MoSSe heterojunction, which act as the sensitive film of the sensor; since rGO can promote electron transfer and effectively inhibit electron-hole recombination, then effectively reduces the recombination probability of electrons and holes and improve photoelectric efficiency, thus improved the detection sensitivity of PEC sensor. The rGO/MoSSe was immobilized on the FTO electrode, and molecularly imprinted polymers (MIPs) were prepared by electropolymerization on the rGO/MoSSe modified FTO electrode with chlortetracycline as the template molecule and o-phenylenediamine as the functional monomer, so as to construct a molecularly imprinted photoelectrochemical (MIP-PEC) sensor. The determination of chlortetracycline was realized by the strategy of "gate-controlled effect", and the detection range of chlortetracycline concentration was 5.0×10-135×10-9 mol/L with a detection limit of 1.57×10-13 mol/L. The sensor has been applied to the determination of chlortetracycline in animal-derived food samples.

chemistry, analytical
A novel photoresponsive molecularly imprinted polymers based on etched silicon core with enabling enhanced selectivity and sensitivity for the detection of sulfamethazine

Wangui Peng,Weihong Huang,Minmin Gao,Wenming Yang,Wanzhen Xu

DOI: https://doi.org/10.1002/pi.6628

IF: 3.213

2024-03-09

Polymer International

Abstract:Sulfamethymidine, a sulfonamide commonly employed, is introduced into the human body through the food chain, posing a threat to human health. Consequently, the development of a rapid and efficient detection technique becomes imperative. In this investigation, a photoresponsive sulfamemethyridiazine imprinted polymer was synthesized to etch a silicon core, thereby effectively addressing the limitations encountered with conventional molecularly imprinted polymers, including diminished binding capacity, restricted site accessibility, and sluggish binding kinetics. The photosensitive monomer utilized in the molecularly imprinted polymers (MIPs) is 5[(4 (methylacryloxy) phenyl) diazene] mphthalic acid, which exhibits a stimulating reaction mechanism. The N=N bond undergoes photoisomerization, transitioning between trans and cis configurations. The adsorption experiment provides additional evidence that the hollow molecularly imprinted polymers exhibit a higher adsorption capacity, achieving a value of 0.192 mmol L−1. The experiments conducted to assess selectivity and repeatability confirm that the photoresponsive MIPs exhibit a high level of selectivity and favorable repeatability. Following four cycles, the adsorption rate consistently remains at 64.3%. After undergoing four cycles, the adsorption rate remains consistently at 64.3%. Additionally, the recoveries of the actual samples ranged from 95.6% to 99.7%. This finding presents a novel approach to detecting the concentration of trace pollutants in intricate substrates. This article is protected by copyright. All rights reserved.

polymer science
Sensitive organic electrochemical transistor biosensors: Comparing single and dual gate functionalization and different COOH-functionalized bioreceptor layers

Yunjia Song,Hao Zhang,Tushita Mukhopadhyaya,Anthony Shoji Hall,Howard E Katz

DOI: https://doi.org/10.1016/j.bios.2022.114691

2022-11-15

Abstract:We developed new measurement configurations based on organic electrochemical transistors (OECTs). Three types of COOH-functionalized bioreceptor layers were deposited on indium tin oxide (ITO) electrodes on poly(ethylene terephthalate) (PET) substrates and their performance was tested using single gate functionalization organic electrochemical transistor (S-OECT) and dual gate functionalization organic electrochemical transistor (D-OECT) configurations. The three layers included one p-type semiconductor, one insulator, and one self-assembled layer, and the dual gates were connected in series through buffer solutions, so the solution-electrode interfaces had the opposite polarities. We investigated the sensitivities of these systems using the human IgG antigen-human IgG antibody receptor pair for main experiments, and drifts of antibody-functionalized gates without analytes as control experiments. Drifts without analyte can obscure the real sensitivity. We show that the D-OECT has the capability to cancel the drifts, and is also beneficial for showing the sensitivity more exactly. This configuration has the ability to increase the accuracy of antibody-antigen interaction detection, and further decrease or eliminate the effect of ions in the buffer solution. We also prove that the D-OECT can work well with different bioreceptor materials, which indicates that the system can be further applied to different conditions.
Sensors: A Highly Sensitive Diketopyrrolopyrrole-Based Ambipolar Transistor for Selective Detection and Discrimination of Xylene Isomers (Adv. Mater. 21/2016)

Bin Wang,Tan-Phat Huynh,Weiwei Wu,Naseem Hayek,Thu Trang Do,John C Cancilla,Jose S Torrecilla,Masrur Morshed Nahid,John M Colwell,Oz M Gazit,Sreenivasa Reddy Puniredd,Christopher R McNeill,Prashant Sonar,Hossam Haick

DOI: https://doi.org/10.1002/adma.201670145

Abstract:An ambipolar organic field-effect transistor (OFET) based on poly(diketopyrrolopyrrole-terthiophene) (PDPPHD-T3) is shown by P. Sonar, H. Haick, and co-workers on page 4012 to sensitively detect xylene isomers at low to 40 ppm level in multiple sensing features. Combined with pattern-recognition algorithms, a sole ambipolar FET sensor, rather than arrays of sensors, is able to discriminate highly similar xylene structural isomers from each other.

Unsupervised Extraction of Appraisal Expressions

Direct Detection of Dilute Solid Chemicals with Responsive Lateral Organic Diodes

Construction of Ce-MOF@COF hybrid nanostructure: Label-free aptasensor for the ultrasensitive detection of oxytetracycline residues in aqueous solution environments

Molecularly Imprinted Poly(thionine)-Based Electrochemical Sensing Platform for Fast and Selective Ultratrace Determination of Patulin

Detection of tetracycline by molecularly imprinted electrochemical sensor based on the modification of poly(3,4-propylene dioxythiophene)/chitosan/au

Integrated Sensing Platform Validated for the Efficient and On-Site Screening of Amine-Containing Illicit Drugs

MXene@MnIn2S4‐Gated Organic Photoelectrochemical Transistors with Nanozyme‐Mediated Multiple Quenching Effects for Ultrasensitive Detection of Okadaic Acid

Design and Fabrication of Ultrathin Nanoporous Donor-Acceptor Copolymer-Based Organic Field-Effect Transistors for Enhanced VOC Sensing Performance

Multi-Oxyanion Detection by an Organic Field-Effect Transistor with Pattern Recognition Techniques and Its Application to Quantitative Phosphate Sensing in Human Blood Serum

Highly selective and responsive detection of simetryn in tobacco samples based on molecularly imprinted photonic crystal hydrogels

GeneDesign: rapid, automated design of multikilobase synthetic genes.

A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles.

Enabling the aqueous solution sensing of skin-conformable organic field-effect transistor using an amphiphilic molecule

Ultrasensitive Specific Stimulant Assay Based on Molecularly Imprinted Photonic Hydrogels

Fabrication of Molecularly Imprinted Electrochemical Sensor for Selective Detection of Propranolol Hydrochloride

A highly sensitive TiO 2 -based molecularly imprinted photoelectrochemical sensor with regulation of imprinted sites by Photo-deposition

Highly Stable Organic Polymer Field-Effect Transistor Sensor for Selective Detection in the Marine Environment

A molecularly imprinted photoelectrochemical sensor based on rGO/MoSSe heterojunction for the detection of chlortetracycline

A novel photoresponsive molecularly imprinted polymers based on etched silicon core with enabling enhanced selectivity and sensitivity for the detection of sulfamethazine

Sensitive organic electrochemical transistor biosensors: Comparing single and dual gate functionalization and different COOH-functionalized bioreceptor layers

Sensors: A Highly Sensitive Diketopyrrolopyrrole-Based Ambipolar Transistor for Selective Detection and Discrimination of Xylene Isomers (Adv. Mater. 21/2016)