Abstract:Background: Photon counting detectors (PCDs) provide higher spatial resolution, improved contrast-to-noise ratio (CNR), and energy discriminating capabilities. However, the greatly increased amount of projection data in photon counting computed tomography (PCCT) systems becomes challenging to transmit through the slip ring, process, and store. Purpose: This study proposes and evaluates an empirical optimization algorithm to obtain optimal energy weights for energy bin data compression. This algorithm is universally applicable to spectral imaging tasks including 2 and 3 material decomposition (MD) tasks and virtual monoenergetic images (VMIs). This method is simple to implement while preserving spectral information for the full range of object thicknesses and is applicable to different PCDs, for example, silicon detectors and CdTe detectors. Methods: We used realistic detector energy response models to simulate the spectral response of different PCDs and an empirical calibration method to fit a semi-empirical forward model for each PCD. We numerically optimized the optimal energy weights by minimizing the average relative Cramér-Rao lower bound (CRLB) due to the energy-weighted bin compression, for MD and VMI tasks over a range of material area density ρ A , m ${\rho }_{A,m}$ (0-40 g/cm2 water, 0-2.16 g/cm2 calcium). We used Monte Carlo simulation of a step wedge phantom and an anthropomorphic head phantom to evaluate the performance of this energy bin compression method in the projection domain and image domain, respectively. Results: The results show that for 2 MD, the energy bin compression method can reduce PCCT data size by 75% and 60%, with an average variance penalty of less than 17% and 3% for silicon and CdTe detectors, respectively. For 3 MD tasks with a K-edge material (iodine), this method can reduce the data size by 62.5% and 40% with an average variance penalty of less than 12% and 13% for silicon and CdTe detectors, respectively. Conclusions: We proposed an energy bin compression method that is broadly applicable to different PCCT systems and object sizes, with high data compression ratio and little loss of spectral information.

Data Analysis and Filter Optimization for Pulse-Amplitude Measurement: A Case Study on High-Resolution X-ray Spectroscopy

Measurement Precision Improvement for Excimer Laser Pulse Energy Sensor Based on A Special Finite Impulse Response Filter

Microcalorimeter Spectroscopy at High Pulse Rates: a Multi-Pulse Fitting Technique

Optimal filtering of overlapped pulses in microcalorimeter data

Processing of X-ray Microcalorimeter Data with Pulse Shape Variation using Principal Component Analysis

Deconvolution filters to enhance resolution of dense time-of-flight survey spectra in the time-lag optimization range

Optimum Digital Filter Synthesis with Arbitrary Constraints and Noise

Digital Fourier Transform Spectroscopy: a High-Performance, Scalable Technology for On-Chip Spectrum Analysis

A Programmable Optical Filter with Arbitrary Transmittance for Fast Spectroscopic Imaging and Spectral Data Post-Processing.

Pulse processing in TES detectors: comparison of different short filter methods based on optimal filtering. Case study for Athena X-IFU

Second Derivative Analysis and Alternative Data Filters for Multi-Dimensional Spectroscopies: A Fourier-space Perspective

Pulse Parameter Optimization Method for Ultra High Dose Rate Electron Treatment

Empirical optimization of energy bin weights for compressing measurements with realistic photon counting x-ray detectors

Optimized Online Filter Stack Spectrometer for Ultrashort X-ray Pulses

Optimizing surface plasmon resonance spectral imaging through AOTF-calibrated light sources and image feedback

Optimal X-ray filters for EDXRF analysis

Experimental verification for optimal design of the filter-based spectrometer

A Pulse-Shape Discrimination Method for Improving Gamma-ray Spectrometry Based on a New Digital Shaping Filter

Methods for energy dispersive x-ray spectroscopy with photon-counting and deconvolution techniques

On-the-fly Data Assessment for High Throughput X-ray Diffraction Measurement

Reward based optimization of resonance-enhanced piezoresponse spectroscopy