Water Intoxication and Sodium Depletion in Surgical Patients

J. Scott,J. S. Welch,I. Berman

1965-08-01

Obstetrics and Gynecology

Abstract:

What problem does this paper attempt to address?

Survey of classical density functionals for modelling hydrogen physisorption at 77K.

M. Sweatman

DOI: https://doi.org/10.1103/PHYSREVE.77.026712

2008-02-28

Abstract:This work surveys techniques based on classical density functionals for modeling the quantum dispersion of physisorbed hydrogen at 77K. Two such techniques are examined in detail. The first is based on the "open ring approximation" (ORA) of Broukhno et al., and it is compared with a technique based on the semiclassical approximation of Feynman and Hibbs (FH). For both techniques, a standard classical density functional is used to model hydrogen molecule-hydrogen molecule (i.e., excess) interactions. The three-dimensional (3D) quantum harmonic oscillator (QHO) system and a model of molecular hydrogen adsorption into a graphitic slit pore at 77K are used as benchmarks. Density functional results are compared with path-integral Monte Carlo simulations and with exact solutions for the 3D QHO system. It is found that neither of the density functional treatments are entirely satisfactory. However, for hydrogen physisorption studies at 77K the ORA based technique is generally superior to the FH based technique due to a fortunate cancellation of errors in the density functionals used. But, if more accurate excess functionals are used, the FH technique would be superior.
In-vitro activity and in-vivo efficacy of catheters impregnated with chloroxylenol and thymol against uropathogens.

M. Mansouri,R. Darouiche

DOI: https://doi.org/10.1111/J.1469-0691.2007.01894.X

IF: 13.31

2008-02-01

Clinical Microbiology and Infection

Abstract:
Integrated Piezoelectric/Conductive Composite Cryogel Creates Electroactive Microenvironment for Enhanced Bone Regeneration

Tianyi Zheng,Yanyun Pang,Daixing Zhang,Yue Wang,Xu Zhang,Huijie Leng,Yingjie Yu,Xiaoping Yang,Qing Cai

DOI: https://doi.org/10.1002/adhm.202300927

Abstract:Natural bone tissue possesses inherent electrophysiological characteristics, displaying conductivity and piezoelectricity simultaneously; hence, the reconstruction of local electrical microenvironment at defect site provides an effective strategy to enhance osteogenesis. Herein, a composite cryogel-type scaffold (referred to as Gel-PD-CMBT) is developed for bone regeneration, utilizing gelatin (Gel) in combination with a conductive poly(ethylene dioxythiophene)/polystyrene sulfonate matrix and Ca/Mn co-doped barium titanate (CMBT) nanofibers as the piezoelectric filler. The incorporation of these components results in the formation of an integrated piezoelectric/conductive network within the scaffold, facilitating charge migration and yielding a conductivity of 0.59 S cm-1 . This conductive scaffold creates a promising electroactive microenvironment, which is capable of up-regulating biological responses. Furthermore, the interconnected porous structure of the Gel-PD-CMBT scaffold not only provides mechanical stability but also offered ample space for cellular and tissue ingrowth. This Gel-PD-CMBT scaffold demonstrates a greater capacity to promote cellular osteogenic differentiation in vitro and neo-bone formation in vivo. In summary, the Gel-PD-CMBT scaffold, with its integrated piezoelectricity and conductivity, effectively restores the local electroactive microenvironment, offering an ideal platform for the regeneration of electrophysiological bone tissue.
Modulating Surface Potential by Controlling the Β Phase Content in Poly(vinylidene Fluoridetrifluoroethylene) Membranes Enhances Bone Regeneration

Chenguang Zhang,Wenwen Liu,Cen Cao,Fengyi Zhang,Qingming Tang,Siqin Ma,JiaJia Zhao,Li Hu,Yang Shen,Lili Chen

DOI: https://doi.org/10.1002/adhm.201701466

IF: 10

2018-01-01

Advanced Healthcare Materials

Abstract:Bioelectricity plays a vital role in living organisms. Although electrical stimulation is introduced in the field of bone regeneration, the concept of a dose–response relationship between surface potential and osteogenesis is not thoroughly studied. To optimize the osteogenic properties of different surface potentials, a flexible piezoelectric membrane, poly(vinylidene fluoridetrifluoroethylene) [P(VDF‐TrFE)], is fabricated by annealing treatment to control its β phases. The surface potential and piezoelectric coefficients (d33) of the membranes can be regulated by increasing β phase contents. Compared with d33 = 20 pC N−1 (surface potential = −78 mV) and unpolarized membranes, bone marrow mesenchymal stem cells (BM‐MSCs) cultured on the d33 = 10 pC N−1 (surface potential = −53 mV) membranes have better osteogenic properties. In vivo, d33 = 10 pC N−1 membranes result in rapid bone regeneration and complete mature bone‐structure formation. BM‐MSCs on d33 = 10 pC N−1 membranes have the lowest reactive oxygen species level and the highest mitochondrial membrane electric potential, implying that these membranes provide the best electrical qunantity for BM‐MSCs’ proliferation and energy metabolism. This study establishes an effective method to control the surface potential of P(VDF‐Trfe) membranes and highlights the importance of optimized electrical stimulation in bone regeneration.
3D-Printed Demineralized Bone Matrix-Based Conductive Scaffolds Combined with Electrical Stimulation for Bone Tissue Engineering Applications

Damion T Dixon,Erika N Landree,Cheryl T Gomillion

DOI: https://doi.org/10.1021/acsabm.4c00236

2024-07-15

Abstract:Bone is remodeled through a dynamic process facilitated by biophysical cues that support cellular signaling. In healthy bone, signaling pathways are regulated by cells and the extracellular matrix and transmitted via electrical synapses. To this end, combining electrical stimulation (ES) with conductive scaffolding is a promising approach for repairing damaged bone tissue. Therefore, "smart" biomaterials that can provide multifunctionality and facilitate the transfer of electrical cues directly to cells have become increasingly more studied in bone tissue engineering. Herein, 3D-printed electrically conductive composite scaffolds consisting of demineralized bone matrix (DBM) and polycaprolactone (PCL), in combination with ES, for bone regeneration were evaluated for the first time. The conductive composite scaffolds were fabricated and characterized by evaluating mechanical, surface, and electrical properties. The DBM/PCL composites exhibited a higher compressive modulus (107.2 MPa) than that of pristine PCL (62.02 MPa), as well as improved surface properties (i.e., roughness). Scaffold electrical properties were also tuned, with sheet resistance values as low as 4.77 × 105 Ω/sq for our experimental coating of the highest dilution (i.e., 20%). Furthermore, the biocompatibility and osteogenic potential of the conductive composite scaffolds were tested using human mesenchymal stromal cells (hMSCs) both with and without exogenous ES (100 mV/mm for 5 min/day four times/week). In conjunction with ES, the osteogenic differentiation of hMSCs grown on conductive DBM/PCL composite scaffolds was significantly enhanced when compared to those cultured on PCL-only and nonconductive DBM/PCL control scaffolds, as determined through xylenol orange mineral staining and osteogenic protein analysis. Overall, these promising results suggest the potential of this approach for the development of biomimetic hybrid scaffolds for bone tissue engineering applications.
Synergistic effect of ultrasound and reinforced electrical environment by bioinspired periosteum for enhanced osteogenesis via immunomodulation of macrophage polarization through Piezo1

Ting Jiang,Fei Yu,Yuqi Zhou,Ruomei Li,Mengting Zheng,Yangyang Jiang,Zhenxia Li,Jun Pan,Ningjuan Ouyang

DOI: https://doi.org/10.1016/j.mtbio.2024.101147

2024-07-05

Abstract:The periosteum plays a vital role in repairing bone defects. Researchers have demonstrated the existence of electrical potential in the periosteum and native bone, indicating that electrical signals are essential for functional bone regeneration. However, the clinical use of external electrical treatments has been limited due to their inconvenience and inefficacy. As an alternative, low-intensity pulsed ultrasound (LIPUS) is a noninvasive form of physical therapy that enhances bone regeneration. Furthermore, the wireless activation of piezoelectric biomaterials through ultrasound stimulation would generate electric charges precisely at the defect area, compensating for the insufficiency of external electrical stimulation and potentially promoting bone regeneration through the synergistic effect of mechanical and electrical stimulation. However, the optimal integration of LIPUS with an appropriate piezoelectric periosteum is yet to be explored. Herein, the BaTiO3/multiwalled-carbon nanotubes/collagen (BMC) membranes have been fabricated, possessing physicochemical properties including improved surface hydrophilicity, enhanced mechanical performance, ideal piezoelectricity, and outstanding biocompatibility, all of which are conducive to bone regeneration. When combined with LIPUS, the endogenous electrical microenvironment of native bone was recreated. After that, the wireless-generated electrical signals, along with the mechanical signals induced by LIPUS, were transferred to macrophages and activated Ca2+ influx through Piezo1. Ultimately, the regenerative effect of the BMC membrane with LIPUS stimulation (BMC + L) was confirmed in a mouse cranial defect model. Together, this research presents a co-engineering strategy that involves fabricating a novel biomimetic periosteum and utilizing the synergistic effect of ultrasound to enhance bone regeneration, which is achieved through the reinforcement of the electrical environment and the immunomodulation of macrophage polarization.
Piezoresistive MXene/Silk fibroin nanocomposite hydrogel for accelerating bone regeneration by Re-establishing electrical microenvironment

Zhi-Chao Hu,Jia-Qi Lu,Tai-Wei Zhang,Hai-Feng Liang,Hao Yuan,Di-Han Su,Wang Ding,Rui-Xian Lian,Yu-Xiang Ge,Bing Liang,Jian Dong,Xiao-Gang Zhou,Li-Bo Jiang,Zhi-Chao Hu,Jia-Qi Lu,Tai-Wei Zhang,Hai-Feng Liang,Hao Yuan,Di-Han Su,Wang Ding,Rui-Xian Lian,Yu-Xiang Ge,Bing Liang,Jian Dong,Xiao-Gang Zhou,Li-Bo Jiang

DOI: https://doi.org/10.1016/j.bioactmat.2022.08.025

IF: 18.9

2023-04-01

Bioactive Materials

Abstract:The electrical microenvironment plays an important role in bone repair. However, the underlying mechanism by which electrical stimulation (ES) promotes bone regeneration remains unclear, limiting the design of bone microenvironment–specific electroactive materials. Herein, by simple co-incubation in aqueous suspensions at physiological temperatures, biocompatible regenerated silk fibroin (RSF) is found to assemble into nanofibrils with a β-sheet structure on MXene nanosheets, which has been reported to inhibit the restacking and oxidation of MXene. An electroactive hydrogel based on RSF and bioencapsulated MXene is thus prepared to promote efficient bone regeneration. This MXene/RSF hydrogel also acts as a piezoresistive pressure transducer, which can potentially be utilized to monitor the electrophysiological microenvironment. RNA sequencing is performed to explore the underlying mechanisms, which can activate Ca2+/CALM signaling in favor of the direct osteogenesis process. ES is found to facilitate indirect osteogenesis by promoting the polarization of M2 macrophages, as well as stimulating the neogenesis and migration of endotheliocytes. Consistent improvements in bone regeneration and angiogenesis are observed with MXene/RSF hydrogels under ES in vivo. Collectively, the MXene/RSF hydrogel provides a distinctive and promising strategy for promoting direct osteogenesis, regulating immune microenvironment and neovascularization under ES, leading to re-establish electrical microenvironment for bone regeneration.

engineering, biomedical,materials science, biomaterials
Biomineralized Piezoelectrically Active Scaffolds for Inducing Osteogenic Differentiation

Zequn Ma,Xiantong Hu,Yi Zhang,Xiangming Li,Bo Chen,Qi An,Yantao Zhao,Yihe Zhang

DOI: https://doi.org/10.1002/chem.202203166

2023-03-13

Chemistry

Abstract:There is an endogenous electric field in living organisms, which plays a vital role in the development and regeneration of bone tissue. Therefore, self-powered piezoelectric material for bone repair has become hot research in recent years. However, the current piezoelectric materials for tissue regeneration still have the shortcomings of lack of biological activity and three-dimensional structure. Here, we proposed a three-dimensional polyurethane foam (PUF) scaffold coated with piezoelectric poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and modified by a calcium phosphate (CaP) mineralized coating. The preferred scaffold has an open circuit voltage and short circuit current output of 5 V and 200 nA. Combining the physical and chemical properties of the CaP coating, the piezoelectric signal of PVDF-HFP and the three-dimensional structure of PUF, the scaffold exhibits superior promotion of cell osteogenic differentiation and ectopic bone formation in vivo. The mechanism is attributed to an increase in intracellular Ca2+ levels in response to chemical and piezoelectric stimulation with the material. This research not only paves the way for the application of piezoelectric scaffolds to stimulate osteoblasts differentiation in situ, but also lays the foundation for the clinical treatment of long-term osteoporosis.
Electroactive Biomaterials Regulate the Electrophysiological Microenvironment to Promote Bone and Cartilage Tissue Regeneration

Li Chen,Jianye Yang,Zhengwei Cai,Yanran Huang,Pengcheng Xiao,Juan Wang,Fan Wang,Wei Huang,Wenguo Cui,Ning Hu

DOI: https://doi.org/10.1002/adfm.202314079

IF: 19

2024-01-09

Advanced Functional Materials

Abstract:Electroactive biomaterials possess the potential to integrate physicochemical, electrical, and topological characteristics, and closely simulate the electrophysiological microenvironment to adapt to tissue regeneration under various pathological conditions. This review emphasizes recent advancements in electroactive biomaterials, including conductive, piezoelectric, and electrically responsive biomaterials, and their applications in bone and cartilage tissue regeneration. The incidence of large bone and articular cartilage defects caused by traumatic injury is increasing worldwide; the tissue regeneration process for these injuries is lengthy due to limited self‐healing ability. Endogenous bioelectrical phenomenon has been well recognized to play an important role in bone and cartilage homeostasis and regeneration. Studies have reported that electrical stimulation (ES) can effectively regulate various biological processes and holds promise as an external intervention to enhance the synthesis of the extracellular matrix, thereby accelerating the process of bone and cartilage regeneration. Hence, electroactive biomaterials have been considered a biomimetic approach to ensure functional recovery by integrating various physiological signals, including electrical, biochemical, and mechanical signals. This review will discuss the role of endogenous bioelectricity in bone and cartilage tissue, as well as the effects of ES on cellular behaviors. Then, recent advances in electroactive materials and their applications in bone and cartilage tissue regeneration are systematically overviewed, with a focus on their advantages and disadvantages as tissue repair materials and performances in the modulation of cell fate. Finally, the significance of mimicking the electrophysiological microenvironment of target tissue is emphasized and future development challenges of electroactive biomaterials for bone and cartilage repair strategies are proposed.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Piezoelectric PDMS/AlN Film for Osteogenesis in Vitro

Haotian Tang,Youtian Mo,Wei Li,Han Hu,Liang Chen,Rui Zhu,Dongliang Zhang,Peidong Ouyang,Wenliang Wang,Guoqiang Li,Jing Tian

DOI: https://doi.org/10.1021/acsbiomaterials.3c00196

2023-07-10

Abstract:Bone defect and nonunion are complex diseases which are difficult to treat due to insufficient bone regeneration. Electrical stimulation has attracted attention as a promising strategy to induce and enhance bone regeneration. Self-powered and biocompatible materials have been widely explored and used in biomedical devices, owing to their ability to produce electrical stimulation without an external power source. We aimed to prepare a piezoelectric polydimethylsiloxane (PDMS)/aluminum nitride (AlN) film with excellent biocompatibility and osteoconductive ability for the growth of murine calvarial preosteoblast MC3T3-E1 cells. By applying vibration to stimulate body movement, the PDMS/AlN film demonstrated a current density of 2-6 μA cm-2, and the generated continuous alternating current (AC) effectively promoted MC3T3-E1 cell growth, viability, and osteoblastic related gene expression (genes runt-related transcription factor 2 [RUNX2], osteocalcin [OCN], alkaline phosphatase [ALP]) and exhibited higher mineralization. Compared to blank plates and nonvibrated PDMS/AlN films, the vibrated PDMS/AlN film showed rapid and superior osteogenic differentiation. The design of the biocompatible and flexible piezoelectric PDMS/AlN film overcame the poor processability, brittleness, and instability of electrical stimulation of traditional electroactive materials, demonstrating great potential in the application of electrical stimulation for bone tissue engineering.
A Computer Vision Framework for Analyzing Overhead and Computer Projections from Video of Lectures

Michael N. Wallick,N. Lobo,M. Shah

Abstract:
Bone Piezoelectricity-Mimicking Nanocomposite Membranes Enhance Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells by Amplifying Cell Adhesion and Actin Cytoskeleton

Xiaowen Sun,Yunyang Bai,Xiaona Zheng,Xiaochan Li,Yingying Zhou,Yijun Wang,Boon Chin Heng,Xuehui Zhang

DOI: https://doi.org/10.1166/jbn.2021.3090

2021-01-01

Journal of Biomedical Nanotechnology

Abstract:Ferroelectric biomaterials have been widely investigated and demonstrated to enhance osteogenesis by simulating the inherent electrical properties of bone tissues. Nevertheless, the underlying biological processes are still not wellunderstood. Hence, this study investigated the underlying biological processes by which bone piezoelectricity-mimicking barium titanate/poly(vinylidene fluoride-trifluoroethylene) nanocomposite membranes (BTO nanocomposite membranes) promote osteogenesis of Bone Marrow Mesenchymal Stem Cells (BMSCs). Ourresults revealed that the piezoelectric coefficient (d33) of nanocomposite membranes aftercontrolled corona poling was similar to that of native bone, and exhibited highly-stable piezoelectrical properties and concentrated surface electrical potential. These nanocomposite membranes significantly enhanced the adhesion and spreading of BMSCs, which was manifested as increased number and area of mature focal adhesions. Furthermore, the nanocomposite membranes significantly promoted the expression of integrin receptors genes (α1, α5 andβ3), which in turn enhanced osteogenesis of BMSCs, as manifested by upregulated Alkaline Phosphatase (ALP) and Bone Morphogenetic Protein 2 (BMP2) expression levels. Further investigations found that the Focal Adhesion Kinase (FAK)-Extracellular Signal-Regulated Kinase1/2 (ERK 1/2) signaling axis may be involved in the biological process of polarized nanocomposite membrane-induced osteogenesis. This study thus provides useful insights for betterunderstanding of the biological processes by which piezoelectric or ferroelectric biomaterials promote osteogenesis.
Modulating the surface potential of microspheres by phase transition in strontium doped barium titanate to restore the electric microenvironment for bone regeneration

Peng Wang,Xiaosong Zhou,Caili Lv,Yu Wang,Zongliang Wang,Liqiang Wang,Yongzhan Zhu,Min Guo,Peibiao Zhang

DOI: https://doi.org/10.3389/fbioe.2022.988300

IF: 5.7

2022-08-30

Frontiers in Bioengineering and Biotechnology

Abstract:The endogenous electrical potential generated by native bone and periosteum plays a key role in maintaining bone mass and quality. Inspired by the electrical properties of bone, different negative surface potentials are built on microspheres to restore electric microenvironment for powerful bone regeneration, which was prepared by the combination of strontium-doped barium titanate (Sr-BTO) nanoparticles and poly (lactic-co-glycolic acid) (PLGA) with high electrostatic voltage field (HEV). The surface potential was modulated through regulating the phase composition of nanoparticles in microspheres by the doping amount of strontium ion (Sr 2+ ). As a result, the 0.1Sr-BTO/PLGA group shows the lowest surface potential and its relative permittivity is closer to natural bone. As expected, the 0.1Sr-BTO/PLGA microspheres performed cytocompatibility, osteogenic activity in vitro and enhance bone regeneration in vivo . Furthermore, the potential mechanism of Sr-BTO/PLGA microspheres to promote osteogenic differentiation was further explored. The lower surface potential generated on Sr-BTO/PLGA microspheres regulates cell membrane potential and leads to an increase in the intracellular calcium ion (Ca 2+ ) concentration, which could activate the Calcineurin (CaN)/Nuclear factor of activated T-cells (NFAT) signaling pathway to promote osteogenic differentiation. This study established an effective method to modulate the surface potential, which provides a prospective exploration for electrical stimulation therapy. The 0.1Sr-BTO/PLGA microsphere with lower surface potential and bone-matched dielectric constant is expected to have great potential in the field of bone regeneration.

multidisciplinary sciences
Electrical stimulation waveform‐dependent osteogenesis on PVDF/BaTiO3 composite using a customized and programmable cell stimulator

B. Basu,A. K. Panda,V S N Sitaramgupta,H. Pandya

DOI: https://doi.org/10.1002/bit.28076

IF: 3.8

2022-03-04

Biotechnology and Bioengineering

Abstract:Directing cellular functionalities using biomaterial‐based bioelectronic stimulation remains a significant constraint in translating research outcomes to address specific clinical needs. Electrical stimulation is now being clinically used as a therapeutic treatment option to promote bone tissue regeneration and to improve neuromuscular functionalities. However, the nature of the electrical waveforms during the stimulation and underlying biophysical rationale are still not scientifically well explored. Furthermore, bone‐mimicking implant‐based bioelectrical regulation of osteoinductivity has not been translated to clinics. The present study demonstrates the role of the electrical stimulation waveform to direct differentiation of stem cells on an electroactive polymeric substrate, using monophasic direct current (DC), square waveform, and biphasic waveform. In this regard, an in‐house electrical stimulation device has been fabricated for the uninterrupted delivery of programmed electrical signals to stem cells in culture. To provide a functional platform for stem cells to differentiate, barium titanate (BaTiO3, BT) reinforced poly(vinylidene difluoride) (PVDF) has been developed with mechanical properties similar to bone. The electrical stimulation of human mesenchymal stem cells (hMSCs) on PVDF/BT composite inhibited proliferation rate at day 7, indicating early commitment for differentiation. The phenotypical characteristics of DC stimulated hMSCs provided signatures of differentiation towards osteogenic lineage, which was subsequently confirmed using alkaline phosphatase assay, collagen deposition, matrix mineralization, and genetic expression. Our findings suggest that DC stimulation induced early osteogenesis in hMSCs with a higher level of intracellular reactive oxygen species (ROS), whereas the stimulation with square wave directed late osteogenesis with a lower ROS regeneration. In summary, the present study critically analyzes the role of electrical stimulation waveforms in regulating osteogenesis, without external biochemical differentiation inducers, on a bone‐mimicking functional biomaterial substrate. Such a strategy can potentially be adopted to develop orthopedic implant‐based bioelectronic medicine for bone regeneration.

Materials Science,Medicine,Engineering
A nano-conductive osteogenic hydrogel to locally promote calcium influx for electro-inspired bone defect regeneration

Congcong Yu,Xiaozhang Ying,Mohammad-Ali Shahbazi,Linjun Yang,Zaiqiang Ma,Lin Ye,Wentao Yang,Rongtai Sun,Tianyuan Gu,Ruikang Tang,Shunwu Fan,Shasha Yao

DOI: https://doi.org/10.1016/j.biomaterials.2023.122266

IF: 14

Biomaterials

Abstract:Conductive nano-materials and electrical stimulation (ES) have been recognized as a synergetic therapy for ordinary excitable tissue repair. It is worth noting that hard tissues, such as bone tissue, possess bioelectrical properties as well. However, insufficient attention is paid to the synergetic therapy for bone defect regeneration via conductive biomaterials with ES. Here, a novel nano-conductive hydrogel comprising calcium phosphate-PEDOT:PSS-magnesium titanate-methacrylated alginate (CPM@MA) was synthesized for electro-inspired bone tissue regeneration. The nano-conductive CPM@MA hydrogel has demonstrated excellent electroactivity, biocompatibility, and osteoinductivity. Additionally, it has the potential to enhance cellular functionality by increasing endogenous transforming growth factor-beta1 (TGF-β1) and activating TGF-β/Smad2 signaling pathway. The synergetic therapy could facilitate intracellular calcium enrichment, resulting in a 5.8-fold increase in calcium concentration compared to the control group in the CPM@MA ES + group. The nano-conductive CPM@MA hydrogel with ES could significantly promote electro-inspired bone defect regeneration in vivo, uniquely allowing a full repair of rat femoral defect within 4 weeks histologically and mechanically. These results demonstrate that our synergistic strategy effectively promotes bone restoration, thereby offering potential advancements in the field of electro-inspired hard tissue regeneration using novel nano-materials with ES.
Researching progress on bio-reactive electrogenic materials with electrophysiological activity for enhanced bone regeneration

Shaojie Dong,Yuwei Zhang,Yukun Mei,Yifei Zhang,Yaqi Hao,Beilei Liang,Weijiang Dong,Rui Zou,Lin Niu

DOI: https://doi.org/10.3389/fbioe.2022.921284

IF: 5.7

2022-07-25

Frontiers in Bioengineering and Biotechnology

Abstract:Bone tissues are dynamically reconstructed during the entire life cycle phase, which is an exquisitely regulated process controlled by intracellular and intercellular signals transmitted through physicochemical and biochemical stimulation. Recently, the role of electrical activity in promoting bone regeneration has attracted great attention, making the design, fabrication, and selection of bioelectric bio-reactive materials a focus. Under specific conditions, piezoelectric, photoelectric, magnetoelectric, acoustoelectric, and thermoelectric materials can generate bioelectric signals similar to those of natural tissues and stimulate osteogenesis-related signaling pathways to enhance the regeneration of bone defects, which can be used for designing novel smart biological materials for engineering tissue regeneration. However, literature summarizing studies relevant to bioelectric materials for bone regeneration is rare to our knowledge. Consequently, this review is mainly focused on the biological mechanism of electrical stimulation in the regeneration of bone defects, the current state and future prospects of piezoelectric materials, and other bioelectric active materials suitable for bone tissue engineering in recent studies, aiming to provide a theoretical basis for novel clinical treatment strategies for bone defects.

multidisciplinary sciences
Remote coupling of electrical and mechanical cues by diurnal photothermal irradiation synergistically promotes bone regeneration

Haoqi Lei,Jiwei Sun,Zhiyin Dai,Keqi Wo,Junyuan Zhang,Yifan Wang,Baoying Zhao,Wenjie Fan,Jinyu Wang,Yunsong Shi,Cheng Yang,Bin Su,Zhiqiang Luo,Junjie Wu,Lili Chen,Yingying Chu

DOI: https://doi.org/10.1186/s12951-024-02671-6

2024-07-11

Abstract:Recapitulating the natural extracellular physical microenvironment has emerged as a promising method for tissue regeneration, as multiple physical interventions, including ultrasound, thermal and electrical therapy, have shown great potential. However, simultaneous coupling of multiple physical cues to highly bio-mimick natural characteristics for improved tissue regeneration still remains formidable. Coupling of intrinsic electrical and mechanical cues has been regarded as an effective way to modulate tissue repair. Nevertheless, precise and convenient manipulation on coupling of mechano-electrical signals within extracellular environment to facilitate tissue regeneration remains challengeable. Herein, a photothermal-sensitive piezoelectric membrane was designed for simultaneous integration of electrical and mechanical signals in response to NIR irradiation. The high-performance mechano-electrical coupling under NIR exposure synergistically triggered the promotion of osteogenic differentiation of stem cells and enhances bone defect regeneration by increasing cellular mechanical sensing, attachment, spreading and cytoskeleton remodeling. This study highlights the coupling of mechanical signals and electrical cues for modulation of osteogenesis, and sheds light on alternative bone tissue engineering therapies with multiple integrated physical cues for tissue repair.
Synergy Between 3D-Extruded Electroconductive Scaffolds and Electrical Stimulation to Improve Bone Tissue Engineering Strategies

João C. Silva,Pedro Marcelino,João Meneses,Frederico Barbosa,Carla S. Moura,Ana C. Marques,Joaquim Sampaio Cabral,Paula Pascoal-Faria,Nuno Alves,Jorge Morgado,Frederico C. Ferreira,Fábio F. F. Garrudo

DOI: https://doi.org/10.1039/d3tb02673f

IF: 7.571

2024-02-08

Journal of Materials Chemistry B

Abstract:In this work, electroconductive 3D scaffolds of poly(capro-ε-lactone) – poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PCL-PEDOT:PSS) suitable for bone TE applications and ES were developed. The effects of an alkaline treatment (NaOH) of PCL scaffolds and the performance of two different crosslinkers at anchoring PEDOT:PSS to PCL constructs, (3-glycidyloxypropyl)trimethoxysilane (GOPS) and divinyl sulfone (DVS), were evaluated. Both cross-linkers allowed the creation of PCL-PEDOT:PSS composites which were bioactive, through immobilization of gelatin (Gel), electroconductive, (11.3 - 20.1 S cm-1,) and chemically stable. In vitro mineralization of the corresponding 3D conductive scaffolds was greatly enhanced (GOPS(NaOH)-Gel – 3.1 fold, DVS(NaOH)-Gel – 2.0 fold) and scaffold colonization and proliferation were the highest for DVS(NaOH)-Gel condition. In silico modelling of ES application in DVS(NaOH)-Gel scaffolds indicate that the electrical fields distribution is homogeneous, which reduces the probability of formation of faradic products. Osteogenic differentiation of human bone marrow derived mesenchymal stem/stromal cells (hBM-MSCs) was performed under ES. Importantly, our results clearly demonstrated a synergistic effect of scaffold electroconductivity and ES on the enhancement of MSC osteogenic differentiation, particularly on cell-secreted calcium deposition and the upregulation of osteogenic gene markers such as Col I, Oc and Cacna1c. These scaffolds hold promise for future clinical applications, including transplants of personalized bone TE with enhanced maturation/functionality or soft electronic devices.

materials science, biomaterials
Biophysical-driven Piezoelectric and Aligned Nanofibrous Scaffold Promotes Bone Regeneration by Re-Establishing Physiological Electrical Microenvironment

Aoao Wang,Xinbo Ma,Yafeng Yang,Guoliang Shi,Liwei Han,Xiantong Hu,Rui Shi,Jun Yan,Quanyi Guo,Yantao Zhao

DOI: https://doi.org/10.1007/s12274-024-6673-7

IF: 9.9

2024-01-01

Nano Research

Abstract:The initial healing stages of bone fracture is a complex physiological process involving a series of spatially and temporally overlapping events, including pathogen clearance, immunological modulation, and osteogenesis. In this study, we have developed a piezoelectric and aligned nanofibrous scaffold composed of ZnO@PCL/PVDF with multiple antibacterial, immunomodulatory, and osteogenic effects using electrospinning technology. This scaffold’s piezoelectric signal output under ultrasound (US) control can be similar to the physiological electrical signals of healthy bone tissue, creating a truly biomimetic electrical microenvironment in the bone defect. In vitro studies have shown that ZnO@PCL/PVDF scaffold significantly enhances the proliferation, migration, and osteogenic differentiation of MC3T3-E1 cells under piezoelectric drive provided by ultrasound. Furthermore, the scaffold exhibits inhibitory effects on the growth of E. coli and S. aureus, as well as the ability to induce M2 macrophage polarization, indicating potent antibacterial and immunomodulatory properties. In vivo experiments demonstrated that the ZnO@PCL/PVDF scaffold can accelerate the repair of mandibular defects in rats, effectively inhibit bacterial colonization, and reduce inflammatory responses. Altogether, this study confirms that the newly developed ZnO@PCL/PVDF scaffold effectively promotes bone repair by truly mimicking the endogenous electrical microenvironment and precisely regulating the temporospatial disorders of initial bone healing, thus providing a simple and effective solution for bone defects.
Ultrasound-driven electrical stimulation based on 3D hierarchical porous piezoelectric nanofiber-aerogel scaffold promotes bone defect repair

Zhengrong Chen,Jiaqi Zheng,Xiaomin Pei,Shuang Sun,Jinhong Cai,Yang Liu,Yunming Wang,Li Zheng,Huamin Zhou

DOI: https://doi.org/10.1016/j.cej.2023.144305

IF: 15.1

2023-08-01

Chemical Engineering Journal

Abstract:Electroactive scaffolds with three-dimension (3D) hierarchical porous structure have demonstrated immense potential in tissue repair and regeneration by providing an electrical microenvironment at bone defect sites. Herein, we designed a biodegradable nanofiber-aerogel scaffold with hierarchical porous structure and rehabilitated electrical microenvironment for accelerated bone regeneration. Incorporating piezoelectrical ZnO/polyhydroxybutyrate nanofibers and chitosan into three-dimensional porous structure, the nanofiber-aerogel scaffold with extracellular matrix (ECM)-like structure effectively facilitated adhesion, migration and recruitment of stem cells, which also rehabilitated electric microenvironment for accelerating osteogenic differentiation under controllable ultrasonic (US) stimulation. A series of biological experiments in vitro and in vivo had been performed to verify osteogenic performance of nanofiber-aerogel scaffolds. This work highlights the potential application of nanofiber-aerogel scaffold processing ECM-like structure and rehabilitating electrical microenvironment in the therapy of bone defects.

engineering, chemical, environmental

Water Intoxication and Sodium Depletion in Surgical Patients

Survey of classical density functionals for modelling hydrogen physisorption at 77K.

In-vitro activity and in-vivo efficacy of catheters impregnated with chloroxylenol and thymol against uropathogens.

Integrated Piezoelectric/Conductive Composite Cryogel Creates Electroactive Microenvironment for Enhanced Bone Regeneration

Modulating Surface Potential by Controlling the Β Phase Content in Poly(vinylidene Fluoridetrifluoroethylene) Membranes Enhances Bone Regeneration

3D-Printed Demineralized Bone Matrix-Based Conductive Scaffolds Combined with Electrical Stimulation for Bone Tissue Engineering Applications

Synergistic effect of ultrasound and reinforced electrical environment by bioinspired periosteum for enhanced osteogenesis via immunomodulation of macrophage polarization through Piezo1

Piezoresistive MXene/Silk fibroin nanocomposite hydrogel for accelerating bone regeneration by Re-establishing electrical microenvironment

Biomineralized Piezoelectrically Active Scaffolds for Inducing Osteogenic Differentiation

Electroactive Biomaterials Regulate the Electrophysiological Microenvironment to Promote Bone and Cartilage Tissue Regeneration

Piezoelectric PDMS/AlN Film for Osteogenesis in Vitro

A Computer Vision Framework for Analyzing Overhead and Computer Projections from Video of Lectures

Bone Piezoelectricity-Mimicking Nanocomposite Membranes Enhance Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells by Amplifying Cell Adhesion and Actin Cytoskeleton

Modulating the surface potential of microspheres by phase transition in strontium doped barium titanate to restore the electric microenvironment for bone regeneration

Electrical stimulation waveform‐dependent osteogenesis on PVDF/BaTiO3 composite using a customized and programmable cell stimulator

A nano-conductive osteogenic hydrogel to locally promote calcium influx for electro-inspired bone defect regeneration

Researching progress on bio-reactive electrogenic materials with electrophysiological activity for enhanced bone regeneration

Remote coupling of electrical and mechanical cues by diurnal photothermal irradiation synergistically promotes bone regeneration

Synergy Between 3D-Extruded Electroconductive Scaffolds and Electrical Stimulation to Improve Bone Tissue Engineering Strategies

Biophysical-driven Piezoelectric and Aligned Nanofibrous Scaffold Promotes Bone Regeneration by Re-Establishing Physiological Electrical Microenvironment

Ultrasound-driven electrical stimulation based on 3D hierarchical porous piezoelectric nanofiber-aerogel scaffold promotes bone defect repair