Abstract:ObjectivesRendered oils and fats are commonly used in pet food products. Given the implementation of the Food Safety Modernization Act (FSMA), which enforces a zero-tolerance policy for Salmonella in pet foods, the microbiological safety of these products has become an area of focus for the industry. The objectives of this study were to (i) understand the lethality of E. coli O157:H7 and Salmonella in heat treated, rendered used cooking oil, (ii) determine D and z-values for E. coli O157:H7 and Salmonella in heat treated, rendered used cooking oil and (iii) establish critical limits for use in a HACCP or other food safety systems.Materials and MethodsThe objectives were addressed by inoculating previously rendered, used cooking oil, with a five-strain mixture of Salmonella or E. coli O157:H7 at a level of approximately 8.0 log CFU/ml. Inoculated samples were exposed to heat at 62, 71, or 82°C using a water bath fitted with a circulator. At predetermined time intervals, individual samples were removed from water bath and immediately chilled in an ice bath. Samples were diluted in 0.1% buffered peptone water supplemented with 1% emulsifier (Tween 80). Samples were plated on selective agars (xylose lysine deoxycholate [Salmonella]; sorbitol MacConkey [E. coli O157:H7]) and a non-selective agar (tryptic soy agar supplemented with 1% sodium pyruvate). Limited methodologies are available for the microbiological analysis of high fat and/or oil matrices. Extensive pre-project work was conducted to establish appropriate methodologies to meet objectives in a laboratory setting. It was determined that a traditionally used aqueous inoculum would not be adequately distributed throughout an oil matrix and could potentially interfere with heat transfer during heat treatment. Thus, pathogen cells were resuspended in warmed (37°C), sterile vegetable oil (soybean oil). No difference in inoculation level was observed when an aqueous solution and sterile vegetable oil were compared. Volumetric measurement of oil samples proved inconsistent and thus for experimentation, the mass, rather than volume, was utilized. The addition of Tween 80 aided in homogenization of sample and diluent during surface plating and eliminated phase separation and errors in dilution (i.e., no ten-fold differences across dilutions). Additionally, a larger width tube (50 mL Falcon Tube) was used for the first dilution blank and vortexing was standardized to 30 s—these components proved to be critical for microbial analysis of high-fat liquids or semi-solids. Six replicates were performed for each pathogen and temperature combination. Segmented regression was performed using the Proc NLIN function of SAS (v 9.4; SAS Inst. Inc., Cary, NC) and z-values were calculated using linear regression (SAS).ResultsNonlinear death curves were observed for all pathogen and temperature combinations. This response to heat treatment indicated not only pathogen survival, but possible heat resistance among some strains. As expected, D-values were lower as temperature increased and for all pathogens ranged from 0.03 to 0.04 min at 82°C, 0.14 to 0.27 min at 71°C, and 0.77 to 1.49 min at 62°C. Similarly, Z-values ranged from 14.14°C to 27.78°C for all pathogens. Critical limits were established to be used in a HARPC or HACCP plan.ConclusionEstablished critical limits are being used by renderers to comply with FSMA regulations.

Experimentally Implementing the Linear Nonisothermal Equation for Simultaneously Obtaining D- and z-Values of Salmonella Senftenberg in Skim Milk with a Differential Scanning Calorimeter

Comparison of Heating Block and Water Bath Methods to Determine Heat Resistance in Shiga-toxin Producing Escherichia Coli with and Without the Locus of Heat Resistance.

Thermal inactivation D- and z-values of Salmonella Enteritidis and Salmonella Typhimurium in whole-muscle beef

Heat resistance comparison of Salmonella and Enterococcus faecium in cornmeal at different moisture levels

Effect of Low-Temperature-High-Pressure Treatment on the Reduction of <i>Escherichia coli</i> in Milk

Demonstration of Escherichia Coli Inactivation in Sterile Physiological Saline under High Pressure (HP) Phase Transition Conditions and Analysis of Probable Contribution of HP Metastable Positions Using Model Solutions and Apple Juice

Compression Heating and Temperature Control for High-Pressure Destruction of Bacterial Spores: An Experimental Method for Kinetics Evaluation

Thermal Inactivation of Salmonella Agona in Low-Water Activity Foods: Predictive Models for the Combined Effect of Temperature, Water Activity, and Food Component

Thermal inactivation of Salmonella Typhimurium and surrogate Enterococcus faecium in mash broiler feed in a laboratory scale circulated thermal bath

Nonlinear regression technique to estimate kinetic parameters and confidence intervals in unsteady-state conduction-heated foods

A flow cytometric assay to detect viability and persistence of Salmonella enterica subsp. enterica serotypes in nuclease-free water at 4 and 25°C

Determining Process Lethality of Escherichia Coli O157:H7 and Salmonella in Heat Treated, Rendered Oil

Development of Predictive Models for the Growth Kinetics of Listeria Monocytogenes on Fresh Pork under Different Storage Temperatures

Validation of a Simulated Commercial English Muffin Baking Process to control Salmonella Contamination

Quantitative detection and survival analysis of VBNC Salmonella Typhimurium in flour using droplet digital PCR and DNA-intercalating dyes

Estimating non-isothermal bacterial growth in foods from isothermal experimental data

Effect of Heat Treatment on the Demise of Salmonella DNA

A Comprehensive Review of Variability in the Thermal Resistance (D-Values) of Food-Borne Pathogens-A Challenge for Thermal Validation Trials

Modeling the growth of Salmonella in raw ground pork under dynamic conditions of temperature abuse

Modelling the low temperature growth boundaries of Salmonella Enteritidis in raw and pasteurized egg yolk, egg white and liquid whole egg: Influence of the initial concentration

Evaluating the UV-C sensitivity of Coxiella burnetii in skim milk using a bench-scale collimated beam system and comparative thermal sensitivity study by high-temperature short-time pasteurization