Abstract:Direct catalytic upgrading of biomass-derived fast pyrolysis vapors can occur in different process configurations, under either inert or hydrogen-containing atmospheres. This review summarizes the myriad of different catalysts studied and benchmarks their deoxygenation performance by also taking into account the resulting decrease in bio-oil yield compared to a thermal pyrolysis oil. Generally, catalyst modifications aim at improving the initial selectivity of the catalyst to more desirable oxygen-free hydrocarbons and/or improving the catalysts’ stability against deactivation by coking. Optimizing the pore structure and acid site density/distribution of solid acid catalysts can slow down deactivation and prolong activity. Basic catalysts such as MgO and Na2O/γ-Al2O3 are excellent ketonization catalysts favoring oxygen removal via decarboxylation, whereas solid acid catalysts such as zeolites primarily favor decarbonylation and dehydration. Basic catalysts can therefore produce bio-oils with higher H/C ratios. However, since their coke formation per surface area is higher, compared to a microporous HZSM-5 zeolite, precoking (or imperfect regeneration) of these basic catalysts and operating for longer time-on-stream can be approaches to improve the oil yield. In-line vapor-phase upgrading with a dual bed comprising a solid acid catalyst followed by a basic catalyst active in ketonization and aldol condensation further improves deoxygenation while maintaining high bio-oil carbon recovery. Also low-cost catalysts such as iron-rich red mud have deoxygenation activity. An improved bio-oil carbon recoverycompared at a similar level of oxygen removalcan be obtained when changing from an inert atmosphere to a hydrogen-containing atmosphere and using an effective hydrodeoxygenation (HDO) catalyst. To keep costs low, this can be conducted at near-atmospheric pressure conditions. Pt/TiO2 and MoO3/TiO2 showed high activity and reduced coke formation. Stable performance has been demonstrated using Pt/TiO2 for 100+ reaction/regeneration cycles with woody biomass feedstock. If future works can demonstrate the same durability for lower-cost biomass containing higher contents of ash, N, and S, this would considerably boost the commercial viability of near-atmospheric pressure HDO. Further research should be directed to testing the durability of lower-cost HDO catalysts such as MoO3/TiO2 and further improving the activity and stability of lower-cost catalysts.

MgO-modified activated biochar for biojet fuels from pyrolysis of sawdust on a simple tandem micro-pyrolyzer

Synthesis and characterization of sulfonated activated carbon as a catalyst for bio-jet fuel production from biomass and waste plastics

Preparation of heavy bio-oil-based porous carbon by pyrolysis gas activation and its performance in the aldol condensation for aviation fuel as catalyst carrier

Role of biochar-based catalysts in microwave-induced biomass pyrolysis: Structural properties and modification with Fe-series metals

Reactive catalytic fast pyrolysis of biomass to produce high-quality bio-crude

A Review of Recent Research on Catalytic Biomass Pyrolysis and Low-Pressure Hydropyrolysis

Single-step catalytic deoxygenation of palm feedstocks for the production of sustainable bio-jet fuel

Experimental and Simulation Study of Peanut Shell-derived Activated Carbon and Syngas Production via Integrated Pyrolysis-Gasification Technique

Catalytic pyrolysis of microalgal lipids to liquid biofuels: Metal oxide doped catalysts with hierarchically porous structure and their performance

Catalytic pyrolysis of olive pomace for biofuel production: Application of metal oxide-modified zeolite catalysts

Synergistic Effects of Catalyst Mixtures on Biomass Catalytic Pyrolysis

Role of porous structure and active O-containing groups of activated biochar catalyst during biomass catalytic pyrolysis

Phenols Production Form Douglas Fir Catalytic Pyrolysis with MgO and Biomass-Derived Activated Carbon Catalysts

Monophenols recovery by catalytic pyrolysis of waste sawdust over activated biochar from the brown macroalage Hizikia fusiformis : Mechanism and life-cycle assessment

Catalytic co-pyrolysis of solid wastes (low-density polyethylene and lignocellulosic biomass) over microwave assisted biochar for bio-oil upgrading and hydrogen production

Production of Bio hydrocarbons from Vegetable Oils and Animal Fats Using Magnesium Oxide as Catalyst

Renewable jet-fuel range hydrocarbons production from co-pyrolysis of lignin and soapstock with the activated carbon catalyst

Improving bio-oil quality from low-density polyethylene pyrolysis: Effects of varying activation and pyrolysis parameters

Synergistic effect of hydrogen atmosphere and biochar catalyst on tar decomposition and methane-rich gas production during biomass pyrolysis

Catalytic pyrolysis of biomass for biofuels production

Highly efficient catalytic pyrolysis of biomass vapors upgraded into jet fuel range hydrocarbon-rich bio-oil over a bimetallic Pt–Ni/γ-Al2O3 catalyst