[Chromosomal observations in tritium contaminated cattle].

A. Léonard,G. Deknudt,R. Kirchmann,A. Lafontaine

Abstract:

What problem does this paper attempt to address?

A Implementation Method of Indoor SLAM Using Velodyne Laser Radar for Mobile Robot

Yue-hai Wang,Jing-yu Qi,Xiong Li,Wei Song

DOI: https://doi.org/10.12783/dtcse/cnai2018/24129

2018-01-01

DEStech Transactions on Computer Science and Engineering

Abstract:SLAM is widely studied in complex indoor environment reconstruction by mobile robot. The Rao-Blackwellised particle filter based SLAM is used for map construction and the localization of robot. It bases on the scanning data of the velodyne laser radar to perceive the external environment. And the odometer is to provide the status of robot. However, the cumulative error is produced by the odometer during the moving period. In this paper, in order to increase the accuracy of robot motion estimation, the location of the robot is updated by incorporating scanning matching. The localization and map construction of the mobile robot are achieved in indoor environment.
SLAM, Path Planning Algorithm and Application Research of an Indoor Substation Wheeled Robot Navigation System

Jianxin Ren,Tao Wu,Xiaohua Zhou,Congcong Yang,Jiahui Sun,Mingshuo Li,Huayang Jiang,Anfeng Zhang

DOI: https://doi.org/10.3390/electronics11121838

IF: 2.9

2022-06-10

Electronics

Abstract:Staff safety is not assured due to the indoor substation's high environmental risk factor. The Chinese State Grid Corporation has been engaged in the intelligentization of substations and the employment of robots for inspection tasks. The autonomous navigation and positioning system of the mobile chassis is the most important feature of this type of robot, as it allows the robot to perceive the surrounding environment information at the initial position using its own sensors and find a suitable path to move to the target point to complete the task. Automatic navigation is the basis for the intelligentization of indoor substation robots, which is of great significance to the efficient and safe inspection of indoor substations. Based on this, this paper formulates a new navigation system, and builds a chassis simulation environment in the Robot Operating System (ROS). To begin with, we develop a novel hardware and sensor-based chassis navigation system experimental platform. Secondly, to conduct the fusion of the odometer and inertial navigation data, the Extended Kalman Filter (EKF) is used. The map's creation approach determines how the environmental map is created. The global path is scheduled with the A* algorithm, whereas the local path is scheduled with the Dynamic Window Method (DWA). Finally, the created robot navigation system is applied to an auxiliary operation robot chassis suited for power distribution cabinet switch and the navigation system's experimental analysis is conducted using this platform, demonstrating the system's efficacy and practicability.

engineering, electrical & electronic,computer science, information systems,physics, applied
Stereo Vision Based SLAM Using Rao-Blackwellised Particle Filter

Er-yong Wu,Gong-yan Li,Zhi-yu Xiang,Ji-lin Liu

DOI: https://doi.org/10.1631/jzus.a071361

2008-01-01

Journal of Zhejiang University SCIENCE A

Abstract:We present an algorithm which can realize 3D stereo vision simultaneous localization and mapping (SLAM) for mobile robot in unknown outdoor environments, which means the 6-DOF motion and a sparse but persistent map of natural landmarks be constructed online only with a stereo camera. In mobile robotics research, we extend FastSLAM 2.0 like stereo vision SLAM with “pure vision” domain to outdoor environments. Unlike popular stochastic motion model used in conventional monocular vision SLAM, we utilize the ideas of structure from motion (SFM) for initial motion estimation, which is more suitable for the robot moving in large-scale outdoor, and textured environments. SIFT features are used as natural landmarks, and its 3D positions are constructed directly through triangulation. Considering the computational complexity and memory consumption, Bkd-tree and Best-Bin-First (BBF) search strategy are utilized for SIFT feature descriptor matching. Results show high accuracy of our algorithm, even in the circumstance of large translation and large rotation movements.
Autonomous Navigation System of Indoor Mobile Robots Using 2D Lidar

Jian Sun,Jie Zhao,Xiaoyang Hu,Hongwei Gao,Jiahui Yu

DOI: https://doi.org/10.3390/math11061455

IF: 2.4

2023-03-18

Mathematics

Abstract:Significant developments have been made in the navigation of autonomous mobile robots within indoor environments; however, there still remain challenges in the face of poor map construction accuracy and suboptimal path planning, which limit the practical applications of such robots. To solve these challenges, an enhanced Rao Blackwell Particle Filter (RBPF-SLAM) algorithm, called Lidar-based RBPF-SLAM (LRBPF-SLAM), is proposed. In LRBPF, the adjacent bit poses difference data from the 2D Lidar sensor which is used to replace the odometer data in the proposed distribution function, overcoming the vulnerability of the proposed distribution function to environmental disturbances, and thus enabling more accurate pose estimation of the robot. Additionally, a probabilistic guided search-based path planning algorithm, gravitation bidirectional rapidly exploring random tree (GBI-RRT), is also proposed, which incorporates a target bias sampling to efficiently guide nodes toward the goal and reduce ineffective searches. Finally, to further improve the efficiency of navigation, a path reorganization strategy aiming at eliminating low-quality nodes and improving the path curvature of the path is proposed. To validate the effectiveness of the proposed method, the improved algorithm is integrated into a mobile robot based on a ROS system and evaluated in simulations and field experiments. The results show that LRBPF-SLAM and GBI-RRT perform superior to the existing algorithms in various indoor environments.

mathematics
Research on laser-based mobile robot SLAM and autonomous navigation

Zhihong Huang,Jianping Geng

DOI: https://doi.org/10.1088/1742-6596/2711/1/012021

2024-02-29

Journal of Physics Conference Series

Abstract:SLAM (Simultaneous Localization and Mapping) and autonomous navigation systems, as fundamental components of mobile robots, largely determine their ability to accomplish tasks. While research on laser-based SLAM and autonomous navigation algorithms in simulated environments has achieved significant success, there is limited research on deploying these algorithms on physical mobile robots, conducting real-world experiments to provide practical data for validating the accuracy and applicability of theoretical models. This paper begins by presenting the system architecture of the mobile robot used in this study. Subsequently, it delves into the research on SLAM algorithms, analyzing and selecting the Gmapping algorithm as the solution to the SLAM problem. Furthermore, the paper introduces the research on autonomous navigation, providing a detailed explanation of the principles behind the A* global path planning algorithm combined with the Dynamic Window Approach (DWA) for local path planning. Finally, by controlling the mobile robot through a distributed communication network, the paper tests the performance of the mobile robot, constructs maps in a real indoor environment, achieving a relative map accuracy error of less than 3%, thus validating the effectiveness of the Gmapping algorithm for practical mapping. Autonomous navigation tasks are also performed, testing the mobile robot's local obstacle avoidance capabilities using temporary obstacles. Overall, this research demonstrates that the designed mobile robot can effectively accomplish SLAM and autonomous navigation tasks. The results of this study can also assist beginners in rapidly and clearly building physical mobile robots and deploying SLAM systems.
Localization and Navigation for Indoor Mobile Robot Based on ROS

C. Shi,Yong Li

DOI: https://doi.org/10.1109/CAC.2018.8623225

2018-11-01

Abstract:In view of the high cost and complex structure of autonomous navigation robots in indoor environment, a low-cost, high-performance and simple structure scheme of mobile robot positioning and navigation is proposed and verified experimentally. A modular mobile robot platform was designed and the robot control system was divided into two parts: the upper control system and the real-time control system, which improved the stability of the system and reduced the coupling between modules. Lidar and RGB-D camera Kinect are used as main sensors to obtain information about the surrounding environment. The robot software system is developed by using a distributed software framework of robot operating system (ROS). The SLAM algorithm based on particle filter is used to achieve Simultaneous Localization and Mapping (SLAM) in an unknown environment. The experimental results show that the system can build a map that is consistent with the environment in the indoor environment, and can complete the autonomous navigation task according to the created map. It not only has low cost and high performance, but also has the characteristics of short development cycle and easy expansion.

Computer Science,Engineering
A Novel Autonomous Exploration Algorithm Via LiDAR/IMU SLAM and Hierarchical Subsystem for Mobile Robot in Unknown Indoor Environments

Zhilin Gao,Fei Xie,Yihan Huang,Jing Zhao,Haisen Luo,Xinchen Yan,Fei Zhao,Pin Lyu

DOI: https://doi.org/10.1088/1361-6501/ad8177

IF: 2.398

2024-10-02

Measurement Science and Technology

Abstract:Autonomous exploration in unknown environments is an essential capability for mobile robots. The complexity of autonomous exploration, however, means that existing algorithms struggle to balance efficiency and comprehensiveness, causing low mapping accuracy and redundant path planning. To perform accurate and efficient exploration tasks, we have proposed a novel autonomous exploration algorithm via LiDAR/IMU Simultaneous Localization and Mapping (SLAM) and hierarchical subsystem for mobile robot in unknown environments. Firstly, to enhance mapping accuracy for mobile robot exploration, LiDAR/IMU SLAM is improved with the assistance of backward propagation and iterated Kalman filter, and Bidirectional Rapidly-Exploring Random Trees* (BI-RRT*) is applied for efficient frontier point detection. Secondly, we optimize local path planning by leveraging information theory through perceptual quality evaluation, which is then integrated with global path planning utilizing an enhanced Travelling Salesman Problem (TSP) solver and a sparse grid map to amplify exploration efficiency. Thirdly, an enhanced hierarchical autonomous exploration method for mobile robots is proposed, which incorporates local path planning for seamless navigation around highly promising exploration spots, coupled with global path planning to effectively interconnect various sub-regions. Finally, simulations and field tests have demonstrated that the proposed method explores an unknown indoor environment with a 30.8% reduction in exploration time and a 29.9% reduction in exploration path in comparison with Dynamic Stage Viewpoint Planner (DSVP). The map constructed in this paper has more accurate details and exploration paths have been shortened to ensure effective exploration.

engineering, multidisciplinary,instruments & instrumentation
Development of an indoor localization and navigation system based on monocular SLAM for mobile robots

Thanh Nguyen Canh,Duc Manh Do,Xiem HoangVan

2024-11-08

Abstract:Localization and navigation are two crucial issues for mobile robots. In this paper, we propose an approach for localization and navigation systems for a differential-drive robot based on monocular SLAM. The system is implemented on the Robot Operating System (ROS). The hardware includes a differential-drive robot with an embedded computing platform (Jetson Xavier AGX), a 2D camera, and a LiDAR sensor for collecting external environmental information. The A* algorithm and Dynamic Window Approach (DWA) are used for path planning based on a 2D grid map. The ORB_SLAM3 algorithm is utilized to extract environmental features, providing the robot's pose for the localization and navigation processes. Finally, the system is tested in the Gazebo simulation environment and visualized through Rviz, demonstrating the efficiency and potential of the system for indoor localization and navigation of mobile robots.

Robotics
Research on Two-Round Self-Balancing Robot SLAM Based on the Gmapping Algorithm

Jianwei Zhao,Jinyu Li,Jiaxin Zhou

DOI: https://doi.org/10.3390/s23052489

IF: 3.9

2023-02-24

Sensors

Abstract:Aiming at the inconvenience of inspection and monitoring of coal mine pump room equipment in a narrow and complex environment, this paper proposes and designs a two-wheel self-balancing inspection robot based on laser SLAM. Using SolidWorks, the three-dimensional mechanical structure of the robot is designed, and the overall structure of the robot is analyzed by finite element statics. The kinematics model of the two-wheel self-balancing robot was established, and the multi-closed-loop PID controller was used to design the two-wheel self-balancing control algorithm of the robot. The 2D LiDAR-based Gmapping algorithm was used to locate the robot and construct the map. Through the self-balancing test and anti-jamming test, it is verified that the self-balancing algorithm designed in this paper has a certain anti-jamming ability and good robustness. By using Gazebo to build a simulation comparison experiment, it is verified that the selection of the particle number is of great significance for improving the map accuracy. The actual test results show that the constructed map has high accuracy.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Autonomous Navigation System of Greenhouse Mobile Robot Based on 3D Lidar and 2D Lidar SLAM

Saike Jiang,Shilin Wang,Zhongyi Yi,Meina Zhang,Xiaolan Lv

DOI: https://doi.org/10.3389/fpls.2022.815218

IF: 5.6

2022-03-10

Frontiers in Plant Science

Abstract:The application of mobile robots is an important link in the development of intelligent greenhouses. In view of the complex environment of a greenhouse, achieving precise positioning and navigation by robots has become the primary problem to be solved. Simultaneous localization and mapping (SLAM) technology is a hot spot in solving the positioning and navigation in an unknown indoor environment in recent years. Among them, the SLAM based on a two-dimensional (2D) Lidar can only collect the environmental information at the level of Lidar, while the SLAM based on a 3D Lidar demands a high computation cost; hence, it has higher requirements for the industrial computers. In this study, the robot navigation control system initially filtered the information of a 3D greenhouse environment collected by a 3D Lidar and fused the information into 2D information, and then, based on the robot odometers and inertial measurement unit information, the system has achieved a timely positioning and construction of the greenhouse environment by a robot using a 2D Lidar SLAM algorithm in Cartographer. This method not only ensures the accuracy of a greenhouse environmental map but also reduces the performance requirements on the industrial computer. In terms of path planning, the Dijkstra algorithm was used to plan the global navigation path of the robot while the Dynamic Window Approach (DWA) algorithm was used to plan the local navigation path of the robot. Through the positioning test, the average position deviation of the robot from the target positioning point is less than 8 cm with a standard deviation (SD) of less than 3 cm; the average course deviation is less than 3° with an SD of less than 1° at the moving speed of 0.4 m/s. The robot moves at the speed of 0.2, 0.4, and 0.6 m/s, respectively; the average lateral deviation between the actual movement path and the target movement path is less than 10 cm, and the SD is less than 6 cm; the average course deviation is <3°, and the SD is <1.5°. Both the positioning accuracy and the navigation accuracy of the robot can meet the requirements of mobile navigation and positioning in the greenhouse environment.

plant sciences
An algorithm of simultaneous localization and mapping for mobile robots based on graph optimization

Yuan Guo,Jianhui Zhang,Kun Wei,Mengjun Song,Jinhua Zhang,Xiangyu Zheng,Haiyun Gan,Wenqing Wei

DOI: https://doi.org/10.1117/12.3029720

2024-06-21

Abstract:Simultaneous Localization and Mapping (SLAM) is a core technology for autonomous driving of intelligent vehicles. Based on the single-sensor mapping and localization method, it cannot tackle the issues of environmental degradation and low sampling frequency, and the accuracy and robustness of the mapping and localization solutions, which needs to be further improved. With the development of Multi-sensor Fusion methods, it is possible to make full use of the complementary performance advantages of multiple sensors to fuse the localization and mapping solutions of multiple sensors, which can better meet the requirement of high-precision localization in most scenarios and enhance the robustness of the algorithm. Therefore, this paper proposes a SLAM algorithm for mobile robots based on graph optimization. Due to the large workload of the Cartographer algorithm for adjusting parameters, an optimization method is designed, and a suitable range of parameter values is processed according to this method. With the aim of improving map building accuracy and localization stability, a detection method of Scan Context fusion history frame closed-loop is proposed to improve the closed-loop detection accuracy in the LIO-SAM algorithm. Finally, mobile carts of indoor and outdoor are established in real scenarios. The paper shows that the Cartographer parameter optimization scheme is feasible and the Scan Context closed-loop detection algorithm is more robust, which improves the autonomous localization accuracy of the mobile robot in indoor and outdoor environments.

Computer Science,Engineering
Three-Dimensional Location and Mapping Analysis in Mobile Robotics Based on Visual SLAM Methods

Gustavo A. Acosta-Amaya,Juan M. Cadavid-Jimenez,Jovani A. Jimenez-Builes

DOI: https://doi.org/10.1155/2023/6630038

2023-06-17

Journal of Robotics

Abstract:One of the essential tasks required from a mobile robot is the autonomous and safe navigation of its working environment. However, in many cases, a model of the environment or map is not available to execute this task. Indeed, navigation requires a permanent estimation of the location for a map, which is not available for unknown environments. In such a scenario, the robot must have extended capabilities to solve, concurrently, the problems of localization and mapping. The simultaneous solution of these two problems is known as SLAM (simultaneous localization and mapping) and is a complex problem, not yet fully solved by the scientific community. This is due to the fact that localization requires a map that is not yet available since it is still under construction. In turn, the elaboration of a map requires the estimation of the robot's location. This is the reason why SLAM has been categorized as similar to the chicken and egg problem. In the case of a robot facing an unknown environment, it would be something like what to solve first, localization or mapping? The answer to this question is that the robot will have to solve both problems at the same time. This article presents a study of some of the most representative open source visual SLAM (vSLAM) methods, beginning from an analysis of their characteristics and presenting criteria selection for an experimental design that allows contrasting their advantages and disadvantages. Two of the most representative algorithms for solving vSLAM were considered (RTAB-Map and ORB-SLAM2). The experiments were validated with a robotic system designed for this purpose, which is fully compatible with ROS (robot operating system).
Design of multi-robot collaborative navigation and control system based on ROS and laser SLAM

Zhuoling Zheng,HaoYu Gong,RuoBing Duan,XinYu Qiu,Jiajun Zou

DOI: https://doi.org/10.1088/1742-6596/2284/1/012008

2022-06-11

Journal of Physics: Conference Series

Abstract:Through in-depth research in the current robot field, a design scheme of cooperative navigation and control system for multiple robots based on ROS and laser SLAM is proposed. Compared with a single robot, multi-robot cooperation can improve the operation range and efficiency, and is suitable for more diversified scenarios. The system design includes multi-machine mapping, multi-machine global and local path planning, multi-machine navigation, real-time obstacle avoidance, multi-machine dynamic task assignment. Through the centralized control structure, the robot collects the lidar data in real time to build the map in real time and realizes the integration of multi-machine map building. Then, the path planning algorithm is called to plan the path. Combined with the dynamic task allocation algorithm, the efficiency of multi-robot cooperative operation is maximized and the execution experience is provided for the implementation of other similar projects.
Research on Robot Positioning and Navigation Algorithm Based on SLAM

Yue Dai

DOI: https://doi.org/10.1155/2022/3340529

2022-01-31

Wireless Communications and Mobile Computing

Abstract:In the industrial field, industrial robots have taken over the heavy lifting that used to be done by traditional handicraft assembly lines, greatly freeing up human resources and improving production efficiency and safety. As a result, the focus of this paper is on the SLAM-based robot localization and navigation algorithm (simultaneous localization and mapping). An attitude estimation algorithm based on KF (Kalman filtering) information fusion of vision SLAM and IMU (Inertial Measurement Unit) is proposed, and the ORB-SLAM algorithm is studied and perfected. The fusion of the two postures improves the accuracy and frequency of the robot’s attitude estimation during motion. In addition, PSO (Particle Swarm Optimization) technology is used to optimize the resampling process, and PSO optimizes the particle set to alleviate the problem of particle degradation and exhaustion caused by resampling in the FastSLAM algorithm. Finally, the algorithm is verified to meet the requirements of positioning and composition accuracy, as well as the feasibility and effectiveness of robot autonomous navigation, using the open simulation platform.

computer science, information systems,telecommunications,engineering, electrical & electronic
Graph-based robust localization and mapping for autonomous mobile robotic navigation

Jingchun Yin,Luca Carlone,Stefano Rosa,Basilio Bona

DOI: https://doi.org/10.1109/icma.2014.6885953

2014-08-01

Abstract:Simultaneous Localization and Mapping (SLAM) means to estimate the positions and orientations of the mobile robot and to construct the model of the environment, essential and critical for autonomous navigation and widely used in a large range of application fields, the research goal is to design, implement and validate graph-based robust SLAM algorithm in indoor office-like dynamic scenarios. On the local level, scan matching is executed to estimate the local-relative-roto-translation value: first, pre-processing is performed to filter out the parts corresponding to the moving objects in the raw LIDAR data; second, conditioned-hough-transform-and-linear-regression-based line-segment detection is accomplished to detect the line features from the rest of LIDAR data; third, matching by fitting point to line is applied to estimate the roto-translation value. On the global level, the topological graph is constructed with the previously estimated motion constraints and batch optimization is achieved by a linear solution to estimate the global robot trajectory. Meanwhile, for the local line-feature maps which includes information about the static environment, they are transformed to the global frame based on the robot-pose information and integrated to construct the global-line-feature map. The experiments have verified the effectiveness of this hierarchical algorithm: locally, even when there is much rotation error in the input odometry data, the two sets of laser scan data can still be well matched; globally, the linear solution method can lead to much accurate and efficient results; and the line-feature-based mapping is effective to preserve the key geometrical characteristics of the environment.
Mobile Robot Navigation in Indoor Environments: Comparison of Lidar-Based 2D SLAM Algorithms

Riadh Dhaoui,Amine Rahmouni

DOI: https://doi.org/10.1007/978-3-030-91234-5_57

2021-12-01

Lecture Notes in Mechanical Engineering

Abstract:In this paper, a comparative study on lidar-based 2D Simultaneous Localization and Mapping (SLAM) algorithms in Robot Operating System (ROS) is addressed. These mapping algorithms are tested and compared in both simulations in ROS and experimentally on TurtleBot3 mobile robot. The experimental results are collected under the same conditions to evaluate the performance of the considered techniques. A generalized performance metric which is based on the Iterative Closest Point method, structure similarity index and Hausdorff distance are evaluated to conduct this comparison study. In addition, the Central Processing Unit (CPU) load and memory usage of each algorithm is considered as well. The present work provides a better insight on the performances of each provided SLAM algorithm to adopt the better solution for a given application.
Mini bot 3D: A ROS based Gazebo Simulation

B. Udugama

DOI: https://doi.org/10.48550/arXiv.2302.06368

2023-02-13

Abstract:The recent adoption of the Robot Operating System (ROS) as a software standard in robotics has contributed to novel solutions for several problems on the area. One such problem is known as Simultaneous Localization and Mapping (SLAM) with autonomous navigation, for which a number of algorithms from different classes are available as ROS packages ready to be used on any compatible robot. Many anticipated applications of autonomous mobile robots require for them to navigate in diverse complex environments without support from exterior infrastructures. To perform this on-board navigation, the robot must make use of the available sensor technologies and fuse the most reliable data respective to the present environment in an adaptive manner and optimize the algorithm parameters prior to the actual implementation to reduce the workaround time. This paper will review recent efforts to develop onboard navigation systems which can seamlessly transition between outdoor and indoor environments and different terrains seamlessly using Gazebo simulator with ROS integration. The methodologies surveyed include SLAM, Odometry and Localisation. An overview of the state-of-the-art is provided with a focus on approaches which are adaptive to dynamic sensor uncertainty, dynamic objects and dynamic scenes. The experiences reported on this work should provide insight for roboticists seeking an Autonomous SLAM solution for indoor applications.

Robotics
Review of SLAM Algorithms for Indoor Mobile Robot with LIDAR and RGB-D Camera Technology

Chinmay Kolhatkar,Kranti Wagle

DOI: https://doi.org/10.1007/978-981-15-4692-1_30

2020-07-26

Abstract:Simultaneous localization and mapping are techniques of mapping the homogeneous environments by localizing the sensors’ position in an environment with centimetre accuracy. This paper reviews the different techniques used in mapping and localization of mobile robot and designing of low-cost mobile platform with sensors like RPLIDAR and Microsoft Kinect. This paper also discussed the use of Robot Operating System and different packages and topics used for implementation of SLAM. Along with software implementation of ROS, this paper also covers the comparison of different hardware boards such as NVIDIA Jetson Nano and NVIDIA TK1 GPUs for running heavy and complex CUDA algorithms. Lower slave boards such as Arduino Mega and STM32 are also discussed in this paper. This paper also focuses on use of different localization techniques such as AMCL, ORB-SLAM, Hector SLAM, Gmapping, RTAB-MAP and particle filter SLAM. Robot Operating System played the crucial role in all the complex processing and communication between different running nodes. Autonomous navigation is achieved using ROS navigation stack, and simulations for the same are done in Rviz and gazebo real-time environments. 2D point cloud-based algorithms with laser scanner are compared against the 3D visualization techniques. At the end, clear comparison between all the benchmark algorithms such as Hector SLAM, Gmapping, RTAB-MAP, ORB-SLAM and ZEDfu is done for clear understanding while selecting an algorithm for future research.
ROS-Based Autonomous Navigation Robot Platform with Stepping Motor

Shengmin Zhao,Seung-Hoon Hwang

DOI: https://doi.org/10.3390/s23073648

2023-03-31

Abstract:Indoor navigation robots, which have been developed using a robot operating system, typically use a direct current motor as a motion actuator. Their control algorithm is generally complex and requires the cooperation of sensors such as wheel encoders to correct errors. For this study, an autonomous navigation robot platform named Owlbot was designed, which is equipped with a stepping motor as a mobile actuator. In addition, a stepping motor control algorithm was developed using polynomial equations, which can effectively convert speed instructions to generate control signals for accurately operating the motor. Using 2D LiDAR and an inertial measurement unit as the primary sensors, simultaneous localization, mapping, and autonomous navigation are realised based on the particle filtering mapping algorithm. The experimental results show that Owlbot can effectively map the unknown environment and realise autonomous navigation through the proposed control algorithm, with a maximum movement error being smaller than 0.015 m.
Research of Cartographer Graph Optimization Algorithm Based on Indoor Mobile Robot

Jiali Xu,Di Wang,Maosheng Liao,Wenshuai Shen

DOI: https://doi.org/10.1088/1742-6596/1651/1/012120

2020-11-01

Journal of Physics: Conference Series

Abstract:Abstract In the recent years, mobile robot technology has received widespread attention from all over the world, and Simultaneous Localization and Mapping (SLAM) technology has always been a hot topic for researchers. In this paper, the Cartographer graph optimization SLAM algorithm is studied. Aiming at the problem that loopback detection may have wrong loopback points in the presence of noise, similar and uniform characteristics, a delay judgment module is added to filter the wrong loopback points. The Cartographer algorithm before and after optimization is deployed to the mobile robot platform based on ROS, and a 2D laser scanner is used for the map of indoor building. The experiment results prove that after the algorithm is improved, the overall relative error of the map is reduced by 1.148%, and the accuracy of mapping is improved.

[Chromosomal observations in tritium contaminated cattle].

A Implementation Method of Indoor SLAM Using Velodyne Laser Radar for Mobile Robot

SLAM, Path Planning Algorithm and Application Research of an Indoor Substation Wheeled Robot Navigation System

Stereo Vision Based SLAM Using Rao-Blackwellised Particle Filter

Autonomous Navigation System of Indoor Mobile Robots Using 2D Lidar

Research on laser-based mobile robot SLAM and autonomous navigation

Localization and Navigation for Indoor Mobile Robot Based on ROS

A Novel Autonomous Exploration Algorithm Via LiDAR/IMU SLAM and Hierarchical Subsystem for Mobile Robot in Unknown Indoor Environments

Development of an indoor localization and navigation system based on monocular SLAM for mobile robots

Research on Two-Round Self-Balancing Robot SLAM Based on the Gmapping Algorithm

Autonomous Navigation System of Greenhouse Mobile Robot Based on 3D Lidar and 2D Lidar SLAM

An algorithm of simultaneous localization and mapping for mobile robots based on graph optimization

Three-Dimensional Location and Mapping Analysis in Mobile Robotics Based on Visual SLAM Methods

Design of multi-robot collaborative navigation and control system based on ROS and laser SLAM

Research on Robot Positioning and Navigation Algorithm Based on SLAM

Graph-based robust localization and mapping for autonomous mobile robotic navigation

Mobile Robot Navigation in Indoor Environments: Comparison of Lidar-Based 2D SLAM Algorithms

Mini bot 3D: A ROS based Gazebo Simulation

Review of SLAM Algorithms for Indoor Mobile Robot with LIDAR and RGB-D Camera Technology

ROS-Based Autonomous Navigation Robot Platform with Stepping Motor

Research of Cartographer Graph Optimization Algorithm Based on Indoor Mobile Robot