Abstract:Highly-conductive nanostructures may be dispersed into phase change materials (PCM) to improve their effective thermal conductivity, thus leading to colloidal systems that are referred to as nanostructure-enhanced PCM (NePCM). Results of a theoretical and experimental investigation on freezing of NePCM in comparison to the base PCM are presented. A one-dimensional Stefan model was developed to study the unidirectional freezing of NePCM in a finite slab. Only the thermal energy equation was considered and the presence of static dispersed nanoparticles was modeled using effective media relations. A combination of analytical and integral methods was used to solve this moving boundary problem. The elapsed time to form a given thickness of frozen layer was therefore predicted numerically. A cooled-from-bottom unidirectional freezing experimental setup was designed, constructed, and tested. Thermocouple readings were recorded at several equally spaced locations along the freezing direction in order to monitor the progress of the freezing front. As an example, cyclohexane (C6H12) and copper oxide (CuO) nanoparticles were chosen to prepare the NePCM samples. The effective thermophysical and transport properties of these samples for various particle loadings (0.5/3.8, 1/7.5, and 2/14.7 vol. %/wt. %) were determined using the mixture and Maxwell models. Due to utilization of the Maxwell model for thermal conductivity of both phases, the numerical predictions showed that the freezing time is shortened linearly with increasing particle loading, whereas nonmonotonic expediting was observed experimentally. The maximum expediting was found to be nearly 8.23% for the 0.5 vol. % sample. In the absence of a nanoparticle transport model, the mismatch of the cold plate boundary conditions, lack of accurate thermophysical properties, especially in the solid phase of NePCM samples and precipitation issues with 2 vol. % samples were addressed by improving the experimental setup. Through adopting a copper cold plate, utilizing measured thermal conductivity data for both phases and using 1, 2, and 4 wt. % samples, good agreement between the experimental and numerical results were realized. Specifically, adoption of measured thermal conductivity values for the solid phase in the Stefan model that were originally underestimated proved to be a major cause of harmony between the experiments and predictions. [DOI: 10.1115/1.4006305]

Utilization of Carbon-Based Nanomaterials and Plate-Fin Networks in a Cold PCM Container with Application in Air Conditioning of Buildings

A Theoretical and Experimental Investigation of Unidirectional Freezing of Nanoparticle-Enhanced Phase Change Materials

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Performance analysis of cold storage system with nanofiller phase change material

Melting of hybrid nano-enhanced phase change material in an inclined finned rectangular cavity for cold energy storage

Thermal management of NEPCM during freezing considering conduction mechanism

Thermal Performance Analysis of a 20-Feet Latent Cold Energy Storage Device Integrated with a Novel Fin-Plate Unit for Building Cooling

Assessment of cold storage system in existence of nanomaterial using Galerkin technique

Role of Pin Fin-Metal Foam Composite Structure in Improving Solidification: Performance Evaluation

Experimental and numerical investigation on the cold harvest of composite phase change materials for building energy conservation

Thermal management of cold storage unit in existence of nano-sized additive using Galerkin method

Experimental thermal performance of deionized water and iron oxide nanofluid for cold thermal storage

Numerical and experimental investigations on melting heat transfer performance of PCM in finned cold thermal energy storage

Numerical melting performance analysis of a cylindrical thermal energy storage unit using nano-enhanced PCM and multiple horizontal fins

The increment of performance of cold storage via simulating unsteady solidification utilizing nanomaterial

Effects of different heat transfer enhancers in PCM-based latent thermal energy storage for hydrogen storage in activated carbon bottle

Thermal assessment of storage unit during solidification in existence of different configuration of nano-powders

Water - graphene nanoplatelets based thermal energy storage material with nucleating and thickening agents: An investigation on thermal behavior during phase change

Artificial neural network-based optimization of heat absorption process of phase change materials in a novel-designed finned-plate latent heat storage system

Evaluation of thermal storage system during freezing and loading nano-powders

Simulation research on PCM freezing process to recover and store the cold energy of cryogenic gas