Abstract:The excellent matching of strength and toughness with respect to lath martensite is closely related to its hierarchical configuration and crystallographic features. Recently, a few literatures reported that the GreningerTroiano (G-T) relationship, instead of the generally accepted Kurdjumov-Sachs (K-S) relation, was determined in some lath martensite steels. However, the underlying reason is still waiting to be explored. In the present study, systematic characterizations were performed in water-quenched Fe-12Ni-1.5Si-0.2C steel firstly, then a modified version of crystallographic model developed by Morris et al. was proposed to clarify the microstructure and the crystallography with G-T relationship. As the main crystallographic features, the orientation relationship between prior austenite and martensitic variants is close to G-T rather than K-S relation. Further characterization shows that the block interface is parallel to the annealing twin boundary of prior austenite, indicating the {111}gamma habit plane of blocks. Naturally, three crystallographically distinct blocks with {111}gamma interfaces can be configured into a packet with self-accommodation manner to minimize macro strain. In fact, such a hierarchical configuration with G-T relationship can be understood clearly by the modified version of crystallographic model. Firstly, regarding the bivariant block as the basic element which undertakes the invariant plane shear, the total shear strain within each packet region can thus be effectively cancelled out on the common habit planes of {111}gamma due to the self-accommodation effect, leading to an essentially shear strain-free pattern; Secondly, a higher hierarchy is accompanied with a significant decrease of strain and only a homogenous dilation of 0.02 remains in a prior austenite grain, which is closely related to the unique hierarchy; Thirdly, the G-T relationship is natural preferred for the present steel, which satisfies two conditions in this crystallographic model: (i) a minimum of angular deviation between the {111}gamma and the habit plane of bivariant blocks; (ii) three slip systems of dislocations with 111 alpha' Burgers vectors involved during the martensitic transformation, which is also universally observed in the TEM examinations. Besides that, compared with the case of K-S relationship, a potential influence of G-T relationship on mechanical properties may embody in inducing a lower ductile-brittle transition temperature and better toughness of lath martensite steels.

A Systematical Evaluation of the Crystallographic Orientation Relationship between MC Precipitates and Ferrite Matrix in HSLA Steels

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

A New Orientation Relationship Observed Between MC and Ferrite in Ti Mo Microalloyed Steel Produced by Ultra-Fast Cooling

A new orientation relationship observed between MC and ferrite in TiMo microalloyed steel produced by ultra-fast cooling

Systematic study on orientation relationships between acicular ferrite and Ti-Mg oxide at different cooling rates in low-carbon steel

New Crystallography Insights of Retained Austenite Transformation in an Intercritical Annealed Quenching and Partitioning Steel

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

[P91] Thermodynamic and Kinetic Modeling of the Ferrite-Austenite Phase Transformation

Crystallographic characteristics of acicular ferrite nucleated on inclusions in a HSLA steel

Determination of the orientation relationship between austenite and incommensurate 7M modulated martensite in Ni–Mn–Ga alloys

Orientation relationship of low temperature tempered Martensite investigated by electron back scattered diffraction

The Influence of Intercritical Temperature, Ferrite-Austenite Morphology, and Orientation Relationship on Martensitic Transformation in Dual Phase Steels

Relationship between crystallographic structure of the Ti2O3/MnS complex inclusion and microstructure in the heat-affected zone (HAZ) in steel processed by oxide metallurgy route and impact toughness

Crystallographic orientation evolution during the development of tri-modal microstructure in the hot working of TA15 titanium alloy

Evidence for Austenite to Non-Modulated Martensite Transformation Crystallography and Variant Organization in Ni-Mn-Ga-Co Ferromagnetic Shape Memory Alloys

Orientational Dependence of Microstructure Evolution and the Related Deformation Mechanism of A Single Crystal Ni-Base Superalloy

Influence of cooling rate on phase transformation and precipitation behavior of Ti-bearing steel in continuous cooling process

Crystallographic Analysis of Proeutectoid Ferrite/Austenite Interface and Interphase Precipitation of Vanadium Carbide in Medium-Carbon Steel

Role of (Al, Ti) alloying and annealing temperature in precipitation, recrystallization, and mechanical properties of ferrous multi-component alloys

Crystallographic Texture Evolution and Martensite Transformation in the Strain Hardening Process of a Ferrite-Based Low Density Steel

The microstructure and crystallography of lath martensite with Greninger-Troiano orientation relationship in a Fe-12.8Ni-1.5Si-0.22% C steel