Sperm aging in utero and chromosomal anomalies in rabbit blastocysts.

P. A. Martin,E. Shaver

DOI: https://doi.org/10.1016/0012-1606(72)90031-0

IF: 3.148

1972-07-01

Developmental Biology

Abstract:

What problem does this paper attempt to address?

Rational Design of ZL003-based Organic Dyes for Highly Efficient Dye-Sensitized Solar Cells: Influence of Alkynyl Group and Π-Spacers on Photovoltaic Performance

Zhichun Zheng,Yueyue Shao,Changhua Ding,Minjie Li,Wencong Lu

DOI: https://doi.org/10.1016/j.molstruc.2022.133728

IF: 3.841

2022-01-01

Journal of Molecular Structure

Abstract:Dye-sensitized solar cells (DSSCs) have displayed huge potential in inexpensive, efficient, and clean solar energy-technology. To achieve highly efficient DSSCs, a series of D -n-A organic dyes were designed and their optoelectrical properties were calculated by density functional theory (DFT) and time-dependent density functional theory (TD-DFT). Compared with ZL003, ZS1 designed by introducing the triple bond between donor and n bridge, has higher conjugation, narrower HOMO-LUMO bandgap, and extended ab-sorption spectra. Then five new organic dyes were designed by substituting benzothiadiazole part of ZS1 with five electron-deficient heterocycles. The designed dyes have more conjugated structure, which leads to stronger light harvesting ability with the absorption spectra expanding to the near infrared region, the maximum absorption wavelength red shifting 78 nm similar to 448 nm and light harvesting efficiency (LHE) curve broadening obviously. The intermolecular electron transfer (IET) rate of the design dye is much faster than that of ZL003, over 85.3% of electrons in the design dye have been injected into TiO2 within 200 fs. Especially, the power conversion efficiency (PCE) of BBTD, BTTD and BZOD is more than 25.7%, mainly re-flected in the obvious jump of the theoretical short current density (Jpred . sc ) by more than 68%. Therefore, the design dyes have a good application prospect. We believe that this work could provide theoretical guidance for the design of potential organic sensitizers in highly efficient DSSCs.(c) 2022 Elsevier B.V. All rights reserved.
Efficient Dye-Sensitized Solar Cells with an Organic Photosensitizer Featuring Orderly Conjugated Ethylenedioxythiophene and Dithienosilole Blocks

Wangdong Zeng,Yiming Cao,Yu Bai,Yinghui Wang,Yushuai Shi,Min Zhang,Fangfang Wang,Chunyue Pan,Peng Wang

DOI: https://doi.org/10.1021/cm9036988

IF: 10.508

2010-01-01

Chemistry of Materials

Abstract:In view of the limited ruthenium resource, metal-free organic dyes may play a prominent role in the coming large-scale application of cost-effective dye-sensitized solar cells, if their efficiency and stability can be considerably improved. In this paper we utilized a binay pi-conjugated spacer of ethylenedioxythiophene and dithienosilole to construct a high molar absorption coefficient push-pull dye, characteristic of an intramolecular charge-transfer band peaking at 584 nm measured in chloroform. In comparison with the standard ruthenium sensitizer Z907, this metal-free chromophore C219 endowed a nanocrystalline titania Film with all evident light-harvesting enhancement. leading to an unprecedented 10 0- 10 3% efficiency at the AM 1 5G conditions for dye-sensitized solar cells with nonruthenium dyestuffs, although a highly volatile electrolyte was used. Transient absorption measurements have revealed that even if the kinetics of back-electron transfer and dye regeneration am considerably different for Z907 and C219, the branching ratios of these two charge-transfer channels are over 35 for both dyes, ensuring a high yield of net charge separation at the titania/dye/electrolyte interface. A solvent-free ionic liquid cell with C219 as the sensitizer exhibited an impressive efficiency or 8 9% under a low light intensity of 14.39 mW cm(-2), making it very favorable for the indoor application of flexible dye-sensitized solar cells.
A Stable Quasi-Solid-state Dye-Sensitized Solar Cell with an Amphiphilic Ruthenium Sensitizer and Polymer Gel Electrolyte

Peng Wang,Shaik M. Zakeeruddin,Jacques E. Moser,Mohammad K. Nazeeruddin,Takashi Sekiguchi,Michael Grätzel

DOI: https://doi.org/10.1038/nmat904

IF: 41.2

2003-01-01

Nature Materials

Abstract:Dye-sensitized nanocrystalline solar cells (DSC) have received considerable attention as a cost-effective alternative to conventional solar cells. One of the main factors that has hampered widespread practical use of DSC is the poor thermostability encountered so far with these devices. Here we show a DSC with unprecedented stable performance under both thermal stress and soaking with light, matching the durability criteria applied to silicon solar cells for outdoor applications. The cell uses the amphiphilic ruthenium sensitizer cis-RuLL'(SCN)(2) (L = 4,4'-dicarboxylic acid-2,2'-bipyridine, L' = 4,4'-dinonyl-2,2'-bipyridine) in conjunction with a quasi-solid-state polymer gel electrolyte, reaching an efficiency of >6% in full sunlight (air mass 1.5, 100 mW cm(-2)). A convenient and versatile new route is reported for the synthesis of the heteroleptic ruthenium complex, which plays a key role in achieving the high-temperature stability. Ultramicroelectrode voltammetric measurements show that the triiodide/iodide couple can perform charge transport freely in the polymer gel. The cell sustained heating for 1,000 h at 80 degrees C, maintaining 94% of its initial performance. The device also showed excellent stability under light soaking at 55 degrees C for 1,000 h in a solar simulator (100 mW cm(-2)) equipped with a ultraviolet filter. The present findings should foster widespread practical application of dye-sensitized solar cells.
Enhancement of Power Conversion Efficiency with Zinc Oxide as Photoanode and Cyanococcus, Punica granatum L., and Vitis vinifera as Natural Fruit Dyes for Dye-Sensitized Solar Cells

Ili Salwani Mohamad,Mohd Natashah Norizan,Norsuria Mahmed,Nurnaeimah Jamalullail,Dewi Suriyani Che Halin,Mohd Arif Anuar Mohd Salleh,Andrei Victor Sandu,Madalina Simona Baltatu,Petrica Vizureanu

DOI: https://doi.org/10.3390/coatings12111781

IF: 3.236

2022-11-21

Coatings

Abstract:Ruthenium N719 is a well-known material used as the dye in commercial dye-sensitized solar cell (DSSC) devices. However, it poses risks to human health and the environment over time. On the other hand, titanium dioxide (TiO2) has low electron mobility and high recombination losses when used as a photoanode in this photovoltaic technology device. In addition, using Ruthenium as the dye material harms the environment and human health. As an alternative sensitizer to compensate Ruthenium on two different photoanodes (TiO2 and ZnO), we constructed DSSC devices in this study using three different natural dyes (blueberry, pomegranate, and black grape). In good agreement with the anthocyanin content in the fruits, black grape, with the highest anthocyanin content (450.3 mg/L) compared to other fruit dyes (blueberry—386.6 mg/L and pomegranate—450.3 mg/L), resulted in the highest energy conversion efficiency (3.63%) for the natural dye-based DSSC. Furthermore, this research proved that the electrical performance of natural dye sensitizer in DSSC applications with a ZnO photoanode is better than using hazardous Ru N719 dye with a TiO2 photoanode owing to the advantage of high electron mobility in ZnO.

materials science, multidisciplinary,physics, applied, coatings & films
New Efficiency Records for Stable Dye-Sensitized Solar Cells with Low-Volatility and Ionic Liquid Electrolytes

Dong Shi,Nuttapol Pootrakulchote,Renzhi Li,Jin Guo,Yuan Wang,Shaik M. Zakeeruddin,Michael Graetzel,Peng Wang

DOI: https://doi.org/10.1021/jp808018h

2008-01-01

Abstract:We report a high molar extinction coefficient heteroleptic polypyridyl ruthenium sensitizer, featuring an electron-rich 3,4-ethylenedioxythiophene unit in its ancillary ligand. A nanocrystalline titania film stained with this sensitizer shows an improved optical absorption, which is highly desirable for practical dye-sensitized solar cells with a thin photoactive layer, facilitating the efficient charge collection. In conjunction with low-volatility and solvent-free electrolytes, we achieved 9.6-10.0% and 8.5-9.1% efficiencies under the air-mass 1.5 global solar illumination. These dye-sensitized solar cells retain over 90% of the initial performance after 1000 h full sunlight soaking at 60 degrees C.
Purification from guinea pig erythrocyte stroma of a decay-accelerating factor for the classical c3 convertase, C4b,2a.

A. Nicholson‐Weller,J. Burge,K. Austen

DOI: https://doi.org/10.4049/jimmunol.127.5.2035

1981-11-01

Abstract:A protein with decay-accelerating activity for the classical C3 convertase, C4b2a, has been isolated on the basis of this function from guinea pig erythrocyte stroma. The isolation procedure for decay-accelerating factor of stroma (DAF-S) utilizes butanol extraction and chromatography on DEAE-Sephacel, hydroxylapatite, and phenyl Sepharose. Purified DAF-S has a m.w. of 60,000 and 65,000 on reduced and unreduced SDS gels, respectively, and exhibits m.w. of 30,000 and 175,000 on alkaline gradient gels, suggesting multiples of a 60,000-65,000 subunit. Purified DAF-S elicited a monospecific antiserum whose IgG fraction neutralized the decay-accelerating activity for C4b,2a affixed to 10(7) sheep erythrocytes (EAC1,4,2) in a dose-response fashion. The monospecific antiserum diluted up to 1:5120 agglutinated 1 x 10(6) guinea pig erythrocytes, but not sheep or human erythrocytes, suggesting that DAF-S, an integral membrane protein, has species-specific antigens that are expressed on the surface of the guinea pig erythrocyte.
Innovating dye-sensitized solar cells through novel microalgal and cyanobacterial species extricated dyes: A sustainable tack for material scarce earth

Rahul Chauhan,Abhishek Srivastava,Parasharam M. Shirage,Kiran Bala

DOI: https://doi.org/10.1016/j.solener.2024.112369

IF: 7.188

2024-02-08

Solar Energy

Abstract:This study explores the integration of novel microalgae and cyanobacteria-based photo harvesters into natural dye-sensitized solar cells (DSSCs). These embedded pigments forming dyes can replace toxic chemical dyes and in the cultivation process eliminate the issues of waste water and air present carbon dioxide. The species taken were microalgal namely Asterarcys quadricellulare and Scenedesmus sp. and cyanobacteria named Cronbergia siamensis and Calothrix sp. DSSCs efficiencies were examined after coating with extracted natural dyes along with voltage, current, and fill factor as among the performance criteria that were extensively assessed. Long-term stability and comparisons with traditional DSSCs were performed and reported in this article. Here, J-V analysis confirmed that Glass/ FTO/ c-TiO 2 / 1-D TiO 2 / CR (methanol)/electrolyte/carbon achieved the highest PCE at 1.04 % for Cronbergia siamensis , along with a remarkable V OC of 1520 mV and a J SC of 1.297 mA/cm 2 for the same device. Whereas ethanol-based highest efficiency was achieved by the extracts of the same species and stood at 0.70 %, and V OC at 1265 mV and J SC at 0.921 mA/cm 2 . Results have indicated that such natural upgrades in energy production through solar extraction can create a never-ending fuel through supplementation by the cells or dyes of microalgae and cyanobacteria.

energy & fuels
Recent developments in metal‐free organic sensitizers derived from carbazole, triphenylamine, and phenothiazine for dye‐sensitized solar cells

Dheeraj Devadiga,Muthu Selvakumar,Prakasha Shetty,Mysore Santosh,Raghu Subash Chandrabose,Smagul Karazhanov

DOI: https://doi.org/10.1002/er.6348

IF: 4.6

2021-01-13

International Journal of Energy Research

Abstract:<p>In the present context of increasing population, renewable and sustainable energy alternatives are very much essential to satisfy the necessities of the world. To satisfy this growing demand, scientists are prioritizing the production of cost‐effective and high‐performance clean energy appliances. Dye‐sensitized solar cells (DSSCs) are one such material that is at the forefront of modern solar cell technologies. Being one of the main components of DSSCs, metal‐free organic dyes play a crucial role in light processing and electron injection. In recent times, carbazole (CZ)‐, triphenylamine (TPA)‐, and phenothiazine (PTZ)‐based derivatives have been identified as suitable alternatives to Ru(II) polypyridyl complexes because they are easy to synthesize and exhibit excellent thermal and electronic properties. This review focuses largely on the latest developments in the use of monoanchored and multianchored CZ, TPA, and PTZ scaffolds for DSSC applications and focuses especially on the correlation between molecular design and photovoltaic performance. The physical properties of devices can be adjusted through the sensitizer's strategic design that helps to improve the performance of the devices. We tabulated the photovoltaic parameters corresponding to all dyes presented in this review. Also, applications of additives are presented after the systematic review on CZ‐, TPA‐, and PTZ‐based dyes.</p>

energy & fuels,nuclear science & technology
Efficient and Stable Solid‐State Dye‐Sensitized Solar Cells Based on a High‐Molar‐Extinction‐Coefficient Sensitizer

Mingkui Wang,Soo-Jin Moon,Mingfei Xu,Kethineni Chittibabu,Peng Wang,Ngoc-Le Cevey-Ha,Robin Humphry-Baker,Shaik M. Zakeeruddin,Michael Graetzel

DOI: https://doi.org/10.1002/smll.200901317

IF: 13.3

2010-01-01

Small

Abstract:The high-molar-extinction-coefficient heteroleptic ruthenium dye, cis-Ru (4,4'-bis(5-octylthieno[3,2-b] thiophen-2-yl)-2,2'-bipyridine) (4,4'-dicarboxyl-2,2'-bipyridine) (NCS)(2), exhibits an AM 1.5 solar (100 mW cm(-2))-to-electric power-conversion efficiency of 4.6% in a solid-state dye-sensitized solar cell (SSDSC) with 2,2', 7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)9,9'-spirobifluorene (spiro-MeOTAD) as the organic hole-transporting material. These SSDSC devices exhibit good durability during accelerated tests under visible-light soaking for 1000 h at 60 degrees C. This demonstration elucidates a class of photovoltaic devices with potential for stable and low-cost power generation. The electron recombination dynamics and charge collection that take place at the dye-sensitized heterojunction are studied by means of impedance and transient photovoltage decay techniques.
Facile and Selective Synthesis of Oligothiophene-Based Sensitizer Isomers: an Approach Toward Efficient Dye-Sensitized Solar Cells

Quanyou Feng,Qian Zhang,Xuefeng Lu,Hong Wang,Gang Zhou,Zhong-Sheng Wang

DOI: https://doi.org/10.1021/am402036j

IF: 9.5

2013-01-01

ACS Applied Materials & Interfaces

Abstract:Two sets of isomeric organic dyes with n-hexyl (DH and AH) or 2-ethylhexyl (DEH and AEH) groups substituted at the spacer part have been designed and straightforwardly synthesized via a facile and selective synthetic route. The structure difference between the isomers stands at the position of the incorporated alkyl chains which are introduced into the terthiophene spacer close to the donor (D) or anchor (A) side. The relationship between the isomeric structures and the optoelectronic properties are systematically investigated. It is found that, in the D series dyes, the alkyl group is much closer to the aromatic donor moiety, which brings about strong steric hindrance and therefore causes a remarkable twist in the molecular skeleton. In contrast, a more planar chemical structure and more effective π-conjugation are realized in the A series dye isomers. Consequently, the A series isomeric dyes demonstrate bathochromically shifted absorption bands, resulting in the improved light-harvesting capability and enhanced photo-generated current. However, the D series isomeric dyes with more twisted molecular skeleton have suppressed the intermolecular interactions and retarded the charge recombination more efficiently, which induces higher open-circuit photovoltage. Combining the two effects on the performance of the fabricated dye-sensitized solar cells (DSSC), the influence from the short-circuit photocurrent plays a more significant role on the power conversion efficiency (η). As a result, isomer AEH-based DSSC with quasi-solid-state electrolyte displays the highest η of 7.10% which remained at 98% of the initial value after continuous light soaking for 1000 h. Promisingly, a η of 8.66% has been achieved for AEH-based DSSC with liquid electrolyte containing Co(II)/(III) redox couple. This work presents the crucial issue of molecular engineering and paves a way to design organic sensitizers for highly efficient and stable DSSCs.
An Alternative Alkylpyridinium Iodide with High Electroactivity for Efficient Dye-Sensitized Solar Cells

Feng Hao,Hong Lin,Yizhu Liu,Jianbao Li

DOI: https://doi.org/10.1016/j.elecom.2011.03.007

IF: 5.443

2011-01-01

Electrochemistry Communications

Abstract:Alkyl-substituted pyridinium iodide has been applied as alternative iodide source in dye-sensitized solar cells (DSCs), featuring impressively high diffusivity and electroactivity. Encouraging energy conversion efficiency up to 8.23% was achieved, implying that this alkylpyridinium iodide serves as an effective alternative iodide source for DSCs. The intensity-modulated photocurrent/photovoltage spectroscopy measurements further indicated that the electron diffusion coefficient was considerably enhanced in device with pyridinium iodide electrolyte in comparison with that of the conventional imidazolium iodide, which was primarily due to a more shallow distribution of the surface trap states after the adsorption of pyridinium cations on the TiO2 electrode surface.
Pyrazine-Based Aromatic Dyes as Novel Photosensitizers with Improved Conduction Band and Photovoltaic Features: DFT Insights for Efficient Dye-Sensitized Solar Cells

Zobia Rabbani,Muhammad Usman Khan,Abida Anwar,Ghulam Mustafa,Abrar Ul Hassan,Saad M. Alshehri

DOI: https://doi.org/10.1080/10406638.2024.2408462

2024-10-02

Polycyclic Aromatic Compounds

Abstract:Dye-sensitized solar cells (DSSCs) have garnered significant attention due to their exceptional ability to convert solar energy into electricity at a relatively low cost. Novel organic photosensitizers (FZB1-FZB9) from the pyrazine-based aromatic dye (E)-3-(5-(2,3-bis(40-(diphenylamino)-[1,10-biphenyl]-4-yl)-7 (trifluoromethyl)quinoxalin-5-yl)thiophen-2-yl)-2-cyanoacrylic acid (TPPF) have been quantum chemically modeled for their application in dye-sensitized nanocrystalline TiO 2 solar cells (DSSCs). The electrochemical and photovoltaic features of modeled dyes are investigated by performing DFT insights, i.e. FMOs, absorption maxima, DOS, TDM, NBO, exciton and binding energy, radiative lifetime analysis (ꚍ), electron-injection (Δ Ginject) and regeneration analysis ( ΔGdyeregen )@TiO 2 . FMO analysis confirmed the better electron injection as HOMO of designed dyes was found to be more positive than redox potential I/I 3 (-4.8 eV), and the LUMO appeared more negative than the conduction band of TiO 2 (-4.0 eV). The modeled photosensitizers exhibited red shift λ max from 338-494 nm with a lower energy gap from 5.62 eV in FZB (R) to 5.17 eV in FZB9. Bridging modification reduces the exciton and binding energy for designed dye FZB9 and FZB7 compared to reference FZB. The designed dyes appeared with a lower radiative lifetime of up to 1.32 than the reference dye of 1.63, better light harvesting efficiency (LHE), and the highest NBO charge on bridges of designed photosensitizers for enhanced light emitting efficiency. The investigated dyes exhibited more negative values for electron injection, i.e. −0.003 and the highest values of dye regeneration (ΔGregedyeregen) up to 11.717, which unveils innovative and effective injection of electrons toward semiconductor TiO 2 . Among all dyes, FZB8 proved best with the novel bridging modification that enables quick charge transfer as exhibited the lowest gap (5.17 eV), lowest excitation energy, better LHE, highest charge on LUMO and more negative electron injection (Δ Ginject). The outcomes of this computational study confirmed that this research established a new benchmark for achieving novel and efficient photosensitizers, thus recommending them for future DSSC applications.

chemistry, organic
Optimization of current density of dye-sensitized solar cells by Cd substitution in the electron transport layer

M. I. Yasin,Ghulam M. Mustafa,M. I. Khan,Badriah S. Almutairi,Shamsa Kanwal,A. Dahshan

DOI: https://doi.org/10.1007/s43207-024-00405-w

IF: 2.506

2024-07-13

Journal of the Korean Ceramic Society

Abstract:This study addresses the growing need for energy worldwide and highlights the necessity of switching to sustainable options like dye-sensitized solar cells (DSSCs), which are well known for their affordability, ease of use, and competitive efficiency. Utilizing the sol–gel method, we synthesized diverse samples, including pristine TiO 2 , Cd-doped TiO 2 , and their heterostructures (TiO 2 @Cd–TiO 2 , Cd–TiO 2 @TiO 2 ). A comprehensive evaluation encompassed structural, morphological, optical properties, and photovoltaic behavior through techniques like XRD, SEM, and UV–visible spectroscopy. Structural analysis highlighted the development of the anatase phase in all samples. The particles exhibited spherical grains, and heterostructures displayed dispersed particles with large sizes, enhancing electronic transport and dye absorption for efficient DSSCs. Cd–TiO 2 @TiO 2 exhibits the shortest bandgap (3.24 eV). Notably, Cd–TiO 2 @TiO 2 demonstrated favorable photovoltaic characteristics, including J sc (8.65 ± 0.2 mA -cm 2 ), V oc (0.78 ± 0.2 V), FF (0.718 ± 0.1), and efficiency (4.848 ± 0.5). Electrochemical impedance spectroscopy (EIS) of TiO 2 @Cd–TiO 2 and Cd–TiO 2 @TiO 2 DSSCs unveiled distinct semicircles, indicating reduced charge transfer resistance and enhanced efficiency compared to TiO 2 -only DSSCs. This research contributes vital insights for advancing sustainable and efficient solar cell technologies.

materials science, ceramics
Synthesis, characterization and evaluation of new alternative ruthenium complex for dye sensitized solar cells

H. A. Fetouh,A. E. Dissouky,H. A. Salem,M. Fathy,B. Anis,A. E. Hady Kashyout

DOI: https://doi.org/10.1038/s41598-024-66808-1

IF: 4.6

2024-07-21

Scientific Reports

Abstract:For first time, new innovative ruthenium N3-Dye anchored with selenium (Se) and N3 dye anchored with sulphur atoms were synthesized in a good yield. Dyes are applied and evaluated in performance of dye sensitized solar cell. N3–Se dye showed superior photochemical& electrochemical behavior and high rate electron transfer across anode surface than N3–S dye. The better optical and electrochemical activities would make Se-dye a candidate for applications in solar cells. Half life time of N3–S showed a single exponential decay with an average lifetime of 0.8 ns. For N3–Se dye, decay curve was fitted by sum two exponential functions with 75% and 25% counts have 2.5 ns and 30 ns respectively. Solar cells were fabricated and analyzed to determine their solar-to-electric conversion efficiency under standard AM 1.5 sunlight. Commercial N3 dyes showed current density (J sc ) of 17.813 mA cm −2 , open circuit potential (V oc ) of 0.678 V, filling factor (FF) of 0.607 and conversion efficiencies (η) of 7.3%. Corresponding values for N3–S dye, Jsc 11.2 mA cm −2 , V oc 0.650 V, FF 0.681 and η 5%. Se–N3 dye, showed J sc = 6.670 mA cm −2 , V oc = 0.6004 V, FF = 0.77 and η = 3.09%. Long lifetime of N3–Se caused low practical performance.

multidisciplinary sciences
Exploitation of Ionic Liquid Electrolyte for Dye-Sensitized Solar Cells by Molecular Modification of Organic-Dye Sensitizers

Zhong-Sheng Wang,Nagatoshi Koumura,Yan Cui,Masanori Miyashita,Shogo Mori,Kohjiro Hara

DOI: https://doi.org/10.1021/cm900544j

IF: 10.508

2009-01-01

Chemistry of Materials

Abstract:When an alkyl-functionalized metal-free organic dye (MK-2) was employed as a sensitizer, dyesensitized TiO2 solar cells (DSSCs) fabricated with an ionic liquid (IL) electrolyte showed an energy conversion efficiency of 7.6%, which was comparable to that with a volatile liquid electrolyte. This contrasts with the case of DSSCs employing conventional Ru complex sensitizer (N719), whose efficiency was decreased markedly when the electrolyte was replaced from file volatile to IL. As it result, with the IL electrolyte, the conversion efficiency with MK-2 was higher than that with N719. The result was mainly attributed to longer electron lifetime in the DSSCs with MK-2. The longer electron lifetime is remarkable because with conventional volatile electrolyte, the lifetimes with many organic dyes including MK-2 were shorter than that with N719. This high compatibility of MK-2 with the IL electrolyte shows that the molecular modification of organic dyes can overcome the both disadvantages of ILs and organic dyes, mostly originated from their high viscosity and from the short electron lifetime observed with volatile electrolyte. respectively. Long-term stability of the DSSCs with MK-2 and the ionic electrolyte was also investigated, showing the efficiency of more than 7% for 2000 h under 1 sun conditions.
Sustainable Late Transition Metal-Based Dyes for Dye-Sensitized Solar Cells

Vindhya Hegde,Naveen V. Kulkarni

DOI: https://doi.org/10.1080/02603594.2024.2309881

2024-02-17

Comments on Inorganic Chemistry

Abstract:In recent years, there is a growing interest in the development of sustainable sensitizers for the dye-sensitized solar cell (DSSC) applications. The earth-abundant transition metal complexes offer a potential alternative option to the problematic ruthenium-based dyes, owing to their interesting photophysical properties and eco-friendly nature. This review accounts in detail the development of sustainable late transition metal-sensitizers in the DSSCs. Attempts are made to comprehensively describe the various strategies involved in the molecular design of the potential dye-molecules as well as the methodologies involved in the cell-fabrication. We hope that this review will serve as a promptuary to the researchers and inspire further developments in this field.

chemistry, inorganic & nuclear
Anion-correlated conduction band edge shifts and charge transfer kinetics in dye-sensitized solar cells with ionic liquid electrolytes.

Min Zhang,Jing Zhang,Yu Bai,Yinghui Wang,Mei Su,Peng Wang

DOI: https://doi.org/10.1039/c0cp02728f

IF: 3.3

2010-01-01

Physical Chemistry Chemical Physics

Abstract:In solvent-free ionic liquid electrolytes for efficient dye-sensitized solar cells, iodide and non-iodide melts are ordinarily blended in order to attain a high dynamic fluidity and thereby meet a fast mass transport of electroactive species. This common tactic could bring forth a prominent impact of various anions on cell efficiency by altering photocurrent and/or photovoltage. Herein we report evident effects of the dicyanamide versus tetracyanoborate anion on the energetics of titania conduction band edge and the kinetics of multi-channel charge-transfer reactions in cells employing a high absorption coefficient ruthenium sensitizer C106. A slightly shorter photoluminescence lifetime of C106 grafted on alumina is probed for the tetracyanoborate-based reference cell with respect to the dicyanamide counterpart. However, owing to a more favourable thermodynamic driving force of ∼90 meV, the tetracyanoborate anion prompts an almost 3-fold faster electron injection from the excited-state dye to titania than dicyanamide, leading to a higher charge separation yield, which is in good agreement with an almost indistinguishable ratio of external quantum efficiency enhancement in the whole spectral response region. Compared to tetracyanoborate, the presence of dicyanamide at the titania/electrolyte interface evokes a 27-fold smaller interfacial electron exchange rate (K) with triiodide, accounting for the open-circuit photovoltage variation observed in current-voltage measurements.
A Green Approach to Natural Dyes in Dye-Sensitized Solar Cells

Nurul Izzati Abdul Shukor,Kah-Yoong Chan,Gregory Soon How Thien,Mian-En Yeoh,Pei-Ling Low,Nisha Kumari Devaraj,Zi-Neng Ng,Boon Kar Yap

DOI: https://doi.org/10.3390/s23208412

2023-10-12

Abstract:Solar cells are pivotal in harnessing renewable energy for a greener and more sustainable energy landscape. Nonetheless, eco-friendly materials for solar cells have not been as extensive as conventional counterparts, highlighting a significant area for further investigation in advancing sustainable energy technologies. This study investigated natural dyes from cost-effective and environmentally friendly blueberries and mulberries. These dyes were utilized as alternative sensitizers for dye-sensitized solar cells (DSSCs). Alongside the natural dyes, a green approach was adopted for the DSSC design, encompassing TiO2 photoanodes, eco-friendly electrolytes, and green counter-electrodes created from graphite pencils and candle soot. Consequently, the best-optimized dye sensitizer was mulberry, with an output power of 13.79 µW and 0.122 µW for outdoor and indoor environments, respectively. This study underscored the feasibility of integrating DSSCs with sensitizers derived from readily available food ingredients, potentially expanding their applications in educational kits and technology development initiatives.
Efficient co-sensitization of novel trimethoxybenzene-based dyes with N-719 for highly efficient dye-sensitized solar cells

Azah Alnakeeb,Ahmed A. Fadda,Mohamed A. Ismail,Mohamed R. Elmorsy

DOI: https://doi.org/10.1016/j.optmat.2022.112344

IF: 3.754

2022-06-01

Optical Materials

Abstract:Five novel metal free organic dyes (AL1-5) have been designed and synthesized as sensitizers/co-sensitizers for dye sensitized solar cells (DSSCs). Theoretical, electrochemical, photophysical and photovoltaic performance properties of the target molecules with respect to their chemical nature were investigated. Compared to other dyes (AL1, AL2, AL4, and AL5), DSSC based on sensitizer AL3 outperformed other dyes in photovoltaic performance, as shown by JSC = 8.28 mA cm−2, VOC = 623 mV, and power conversion efficiency (PCE) = 3.07%. This could be attributed to improved charge transfer of AL3 from donor to acceptor, leading to increased photocurrent (JSC). Consequently, dye AL3 has showcased the highest PCE (9.44%) as a co-sensitizer along with the standard Ru(II) dye (N-719). The N-719 based cells employing AL1-5 as co-sensitizers yielded the PCE of 6.31, 8.42, 9.44, 6.37 and 7.55%, respectively, while N-719 alone displayed 8.12%. Electrochemical impedance spectroscopy analysis showed that the fabricated device (N-719 + AL3) has much lower charge transfer resistance than other devices confirming its highest photovoltage value of 715 mV. Density functional theory (DFT) calculations were performed to theoretically characterize the optical and electrochemical properties of the synthesized dyes. These findings clearly support the role of sensitizer/co-sensitizer molecular structures in the operating performance of DSSCs.

materials science, multidisciplinary,optics
A Blue Photosensitizer Realizing Efficient and Stable Green Solar Cells Via Color Tuning by the Electrolyte

Yameng Ren,Yiming Cao,Dan Zhang,Shaik Mohammed Zakeeruddin,Anders Hagfeldt,Peng Wang,Michael Graetzel

DOI: https://doi.org/10.1002/adma.202000193

IF: 29.4

2020-01-01

Advanced Materials

Abstract:Semitransparent dye‐sensitized solar cells (DSCs) are appealing as aesthetically pleasing and colorful see‐through photovoltaics. Green semitransparent DSCs have been presented, but the best ones rely on green zinc porphyrin photosensitizers and high volatile electrolytes. For potential outdoor applications, the zinc porphyrin DSCs employing ionic liquid electrolytes merely reached a power conversion efficiency (PCE) of 6.3% even with opaque mesoporous TiO2 films. Herein, the new green DSC is realized by using a blue organic photosensitizer in conjunction with an orange ionic‐liquid‐based electrolyte, presenting a simple and an effective path for color tuning of photovoltaics. The new approach allows for broadly modulating the color from spring green to cyan by tuning the contributions of the light absorption by the dye‐sensitized TiO2 film and the electrolyte layer. The new semitransparent DSCs with spring green to cyan colors have PCEs ranging from 6.7% to 8.1% and show stability for 1000 h under accelerated ageing test at 80 °C, superior to the zinc porphyrin DSCs. The findings pave a new way to achieve efficient and stable colorful solar cells.

Sperm aging in utero and chromosomal anomalies in rabbit blastocysts.

Rational Design of ZL003-based Organic Dyes for Highly Efficient Dye-Sensitized Solar Cells: Influence of Alkynyl Group and Π-Spacers on Photovoltaic Performance

Efficient Dye-Sensitized Solar Cells with an Organic Photosensitizer Featuring Orderly Conjugated Ethylenedioxythiophene and Dithienosilole Blocks

A Stable Quasi-Solid-state Dye-Sensitized Solar Cell with an Amphiphilic Ruthenium Sensitizer and Polymer Gel Electrolyte

Enhancement of Power Conversion Efficiency with Zinc Oxide as Photoanode and Cyanococcus, Punica granatum L., and Vitis vinifera as Natural Fruit Dyes for Dye-Sensitized Solar Cells

New Efficiency Records for Stable Dye-Sensitized Solar Cells with Low-Volatility and Ionic Liquid Electrolytes

Purification from guinea pig erythrocyte stroma of a decay-accelerating factor for the classical c3 convertase, C4b,2a.

Innovating dye-sensitized solar cells through novel microalgal and cyanobacterial species extricated dyes: A sustainable tack for material scarce earth

Recent developments in metal‐free organic sensitizers derived from carbazole, triphenylamine, and phenothiazine for dye‐sensitized solar cells

Efficient and Stable Solid‐State Dye‐Sensitized Solar Cells Based on a High‐Molar‐Extinction‐Coefficient Sensitizer

Facile and Selective Synthesis of Oligothiophene-Based Sensitizer Isomers: an Approach Toward Efficient Dye-Sensitized Solar Cells

An Alternative Alkylpyridinium Iodide with High Electroactivity for Efficient Dye-Sensitized Solar Cells

Pyrazine-Based Aromatic Dyes as Novel Photosensitizers with Improved Conduction Band and Photovoltaic Features: DFT Insights for Efficient Dye-Sensitized Solar Cells

Optimization of current density of dye-sensitized solar cells by Cd substitution in the electron transport layer

Synthesis, characterization and evaluation of new alternative ruthenium complex for dye sensitized solar cells

Exploitation of Ionic Liquid Electrolyte for Dye-Sensitized Solar Cells by Molecular Modification of Organic-Dye Sensitizers

Sustainable Late Transition Metal-Based Dyes for Dye-Sensitized Solar Cells

Anion-correlated conduction band edge shifts and charge transfer kinetics in dye-sensitized solar cells with ionic liquid electrolytes.

A Green Approach to Natural Dyes in Dye-Sensitized Solar Cells

Efficient co-sensitization of novel trimethoxybenzene-based dyes with N-719 for highly efficient dye-sensitized solar cells

A Blue Photosensitizer Realizing Efficient and Stable Green Solar Cells Via Color Tuning by the Electrolyte